Skip Nav Destination
Issues
PRELIMINARY
Preface: The 3rd International Conference on Industrial Mechanical, Electrical, and Chemical Engineering
AIP Conf. Proc. 1931, 010001 (2018)
https://doi.org/10.1063/1.5024054
PLENARY AND INVITED PAPER
Potential ability of zeolite to generate high-temperature vapor using waste heat
AIP Conf. Proc. 1931, 020001 (2018)
https://doi.org/10.1063/1.5024055
Non-slag co-gasification of biomass and coal in entrained-bed furnace
AIP Conf. Proc. 1931, 020003 (2018)
https://doi.org/10.1063/1.5024057
High yield hydrolysis of seaweed-waste biomass using peracetic acid and ionic liquid treatments
AIP Conf. Proc. 1931, 020004 (2018)
https://doi.org/10.1063/1.5024058
CONTRIBUTED ORAL PAPERS
Multi response optimization of sheet forming of Kenaf-Polypropylene composites using grey based fuzzy algorithm
AIP Conf. Proc. 1931, 030001 (2018)
https://doi.org/10.1063/1.5024060
Extraction of pectin from passion fruit rind (Passiflora edulis var. flavicarpa Degener) for edible coating
AIP Conf. Proc. 1931, 030002 (2018)
https://doi.org/10.1063/1.5024061
Carboxymethyl konjac glucomannan from konjac flour: The effect of media and temperature on carboxymethylation rate
AIP Conf. Proc. 1931, 030003 (2018)
https://doi.org/10.1063/1.5024062
Study on the carboxymethylation of glucomannan from porang
AIP Conf. Proc. 1931, 030005 (2018)
https://doi.org/10.1063/1.5024064
Blends of low molecular weight of poly lactic acid (PLA) with gondorukem (gum rosin)
AIP Conf. Proc. 1931, 030006 (2018)
https://doi.org/10.1063/1.5024065
Catalytic performance of heterogeneous Rh/C3N4 for the carbonylation of methanol
AIP Conf. Proc. 1931, 030010 (2018)
https://doi.org/10.1063/1.5024069
Tin recovery from tin slag using electrolysis method
AIP Conf. Proc. 1931, 030011 (2018)
https://doi.org/10.1063/1.5024070
Adsorption of saturated fatty acid in urea complexation: Kinetics and equilibrium studies
AIP Conf. Proc. 1931, 030013 (2018)
https://doi.org/10.1063/1.5024072
Supply chain risk management in newspaper company: House of risk approach
AIP Conf. Proc. 1931, 030016 (2018)
https://doi.org/10.1063/1.5024075
Supply chain risk management of newspaper industry: A quantitative study
AIP Conf. Proc. 1931, 030018 (2018)
https://doi.org/10.1063/1.5024077
A business strategy formulation for commercializing university-created technology: A university spin-offs
AIP Conf. Proc. 1931, 030020 (2018)
https://doi.org/10.1063/1.5024079
Design of an automatic production monitoring system on job shop manufacturing
AIP Conf. Proc. 1931, 030021 (2018)
https://doi.org/10.1063/1.5024080
A critical spare part inventory control based on hazard function approach: A case study in a garment company
AIP Conf. Proc. 1931, 030022 (2018)
https://doi.org/10.1063/1.5024081
Managing a closed-loop supply chain inventory system with learning effects
AIP Conf. Proc. 1931, 030023 (2018)
https://doi.org/10.1063/1.5024082
Multi objective optimization model for minimizing production cost and environmental impact in CNC turning process
AIP Conf. Proc. 1931, 030024 (2018)
https://doi.org/10.1063/1.5024083
The development of daily monitoring tool in a service part manufacturing company
AIP Conf. Proc. 1931, 030025 (2018)
https://doi.org/10.1063/1.5024084
Designing workload analysis questionnaire to evaluate needs of employees
AIP Conf. Proc. 1931, 030027 (2018)
https://doi.org/10.1063/1.5024086
Safety sign designs for children by considering effect of the colors preferences: A case study
AIP Conf. Proc. 1931, 030028 (2018)
https://doi.org/10.1063/1.5024087
The study of the influence of the diameter ratio and blade number to the performance of the cross flow wind turbine by using 2D computational fluid dynamics modeling
Dominicus Danardono Dwi Prija Tjahjana; Pradityasari Purbaningrum; Syamsul Hadi; Yoga Arob Wicaksono; Dimas Adiputra
AIP Conf. Proc. 1931, 030034 (2018)
https://doi.org/10.1063/1.5024093
Computational studies of an intake manifold for restricted engine application
AIP Conf. Proc. 1931, 030035 (2018)
https://doi.org/10.1063/1.5024094
Blade number impact on pressure and performance of archimedes screw turbine using CFD
AIP Conf. Proc. 1931, 030037 (2018)
https://doi.org/10.1063/1.5024096
V-cut twisted tape insert effect on heat transfer enhancement of single phase turbulent flow heat exchanger
AIP Conf. Proc. 1931, 030038 (2018)
https://doi.org/10.1063/1.5024097
Influence of omni-directional guide vane on the performance of cross-flow rotor for urban wind energy
AIP Conf. Proc. 1931, 030040 (2018)
https://doi.org/10.1063/1.5024099
Experimental studies of Savonius wind turbines with variations sizes and fin numbers towards performance
AIP Conf. Proc. 1931, 030041 (2018)
https://doi.org/10.1063/1.5024100
Experimental study of separator effect and shift angle on crossflow wind turbine performance
AIP Conf. Proc. 1931, 030044 (2018)
https://doi.org/10.1063/1.5024103
Experimental investigation on performance of crossflow wind turbine as effect of blades number
AIP Conf. Proc. 1931, 030045 (2018)
https://doi.org/10.1063/1.5024104
Effect of blades number to performance of Savonius water turbine in water pipe
AIP Conf. Proc. 1931, 030046 (2018)
https://doi.org/10.1063/1.5024105
Experiment evaluation of impact attenuator for a racing car under static load
AIP Conf. Proc. 1931, 030047 (2018)
https://doi.org/10.1063/1.5024106
Aerodynamic analysis of formula student car
AIP Conf. Proc. 1931, 030048 (2018)
https://doi.org/10.1063/1.5024107
Design analysis of formula student race car suspension system
Julian Wisnu Wirawan; Ubaidillah; Rama Aditra; Rafli Alnursyah; Rizki Abdul Rahman; Sukmaji Indro Cahyono
AIP Conf. Proc. 1931, 030051 (2018)
https://doi.org/10.1063/1.5024110
Improvement of centrifugal pump performance through addition of splitter blades on impeller pump
AIP Conf. Proc. 1931, 030053 (2018)
https://doi.org/10.1063/1.5024112
Heat transfer capability of solar radiation in colored roof and influence on room thermal comfort
AIP Conf. Proc. 1931, 030054 (2018)
https://doi.org/10.1063/1.5024113
Study on performance of blended fuel PPO - Diesel at generator
AIP Conf. Proc. 1931, 030055 (2018)
https://doi.org/10.1063/1.5024114
Influence of minimum quantity lubrication with Al2O3 nanoparticles on cutting parameters in drilling process
AIP Conf. Proc. 1931, 030056 (2018)
https://doi.org/10.1063/1.5024115
The influence of flame hardening process to aluminum 7075 series on the mechanical strength and micro structure
AIP Conf. Proc. 1931, 030057 (2018)
https://doi.org/10.1063/1.5024116
The effect of case hardening treatment on aluminum 7075 toward its hardness and tensile strength
AIP Conf. Proc. 1931, 030058 (2018)
https://doi.org/10.1063/1.5024117
Influence of fiber length on flexural and impact properties of Zalacca Midrib fiber/HDPE by compression molding
AIP Conf. Proc. 1931, 030061 (2018)
https://doi.org/10.1063/1.5024120
Effect of gas release in hot molding on flexural strength of composite friction brake
AIP Conf. Proc. 1931, 030062 (2018)
https://doi.org/10.1063/1.5024121
The properties degradation of exposed GFRP roof
AIP Conf. Proc. 1931, 030063 (2018)
https://doi.org/10.1063/1.5024122
Effect of sonication treatment on fibrilating snake fruit (Sallaca) frond fiber
AIP Conf. Proc. 1931, 030064 (2018)
https://doi.org/10.1063/1.5024123
The noise absorption performance of sugarcane-bagasse-polyvinyl acetate glue based absorber
AIP Conf. Proc. 1931, 030065 (2018)
https://doi.org/10.1063/1.5024124
The DMLPG method for numerical solution of Rayleigh-Benard natural convection in porous medium
AIP Conf. Proc. 1931, 030068 (2018)
https://doi.org/10.1063/1.5024127
Alternative use of space in slum settlements case study: Kampong Gandekan Kampung Baru in Kali Pepe river Surakarta
AIP Conf. Proc. 1931, 030071 (2018)
https://doi.org/10.1063/1.5024130
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.