Skip Nav Destination
Issues
12 December 2017
PRELIMINARY
PLENARY AND INVITED PAPERS
Development of methodology for the calculation and experimental investigation of acoustic emission signals
AIP Conf. Proc. 1915, 020001 (2017)
https://doi.org/10.1063/1.5017313
On the analytic solvability of a special boundary value problem for the nonlinear heat equation
AIP Conf. Proc. 1915, 020003 (2017)
https://doi.org/10.1063/1.5017315
Extrudable polymer-polymer composites based on ultra-high molecular weight polyethylene
AIP Conf. Proc. 1915, 020005 (2017)
https://doi.org/10.1063/1.5017317
Nonequilibrium processes of segregation and diffusion in metal-polymer tribosystems
AIP Conf. Proc. 1915, 020007 (2017)
https://doi.org/10.1063/1.5017319
CONTRIBUTED ORAL PAPERS
Research of the stress-strain state of rods obtained by porous blank extrusion
AIP Conf. Proc. 1915, 030003 (2017)
https://doi.org/10.1063/1.5017323
Extended tensile testing of welded joints of polyethylene pipes
AIP Conf. Proc. 1915, 030004 (2017)
https://doi.org/10.1063/1.5017324
The thermal expansion and thermophysical properties of an aluminum and Al/B4C composite
AIP Conf. Proc. 1915, 030005 (2017)
https://doi.org/10.1063/1.5017325
Specific features of the determination of residual stresses in materials by diffraction techniques
AIP Conf. Proc. 1915, 030006 (2017)
https://doi.org/10.1063/1.5017326
A methodology for investigating short-range fields of cluster nanostructures
AIP Conf. Proc. 1915, 030009 (2017)
https://doi.org/10.1063/1.5017329
Determining the Young’s modulus of a cellular titanium implant by FEM simulation
AIP Conf. Proc. 1915, 030010 (2017)
https://doi.org/10.1063/1.5017330
Effect of preliminary nanostructuring frictional treatment on the efficiency of nitriding of metastable austenitic steel in electron beam plasma
A. V. Makarov; G. V. Samoylova; N. V. Gavrilov; A. S. Mamaev; A. L. Osintseva; T. E. Kurennykh; R. A. Savrai
AIP Conf. Proc. 1915, 030011 (2017)
https://doi.org/10.1063/1.5017331
Thermal stability of a laser-clad NiCrBSi coating hardened by frictional finishing
AIP Conf. Proc. 1915, 030012 (2017)
https://doi.org/10.1063/1.5017332
Functionalization of powder and fibrous microfillers for UHMWPE by treatment with polyorganosiloxane
AIP Conf. Proc. 1915, 030016 (2017)
https://doi.org/10.1063/1.5017336
EBSD analysis of the structural state of the Cu-Zn-Mn-Al-Fe-Ni alloy after hot deformation
AIP Conf. Proc. 1915, 030020 (2017)
https://doi.org/10.1063/1.5017340
Effect of the content of SiC on the structure and properties of D16 alloy matrix composites
AIP Conf. Proc. 1915, 030021 (2017)
https://doi.org/10.1063/1.5017341
Effect of hot plastic deformation on the structural state of a Al-10%SiC composite
AIP Conf. Proc. 1915, 030022 (2017)
https://doi.org/10.1063/1.5017342
On the possibility of increasing the resource of high power laser optics by using two-component output windows
AIP Conf. Proc. 1915, 030023 (2017)
https://doi.org/10.1063/1.5017343
Influence of the welding method on the impact strength and cyclic fracture toughness parameters of the 09G2S steel
AIP Conf. Proc. 1915, 030024 (2017)
https://doi.org/10.1063/1.5017344
Modeling the stress-strain state of the V95/SiC aluminum alloy matrix composite under uniaxial loading
AIP Conf. Proc. 1915, 030026 (2017)
https://doi.org/10.1063/1.5017346
CONTRIBUTED POSTER PAPERS
Sources of mineral raw materials for the production of building materials of the Republic of Sakha (Yakutia)
AIP Conf. Proc. 1915, 040004 (2017)
https://doi.org/10.1063/1.5017352
Strength and reliability analysis of metal-composite overwrapped pressure vessel
AIP Conf. Proc. 1915, 040006 (2017)
https://doi.org/10.1063/1.5017354
Projections of limiting states for load-bearing structures of reflectors made of polymer composites
AIP Conf. Proc. 1915, 040008 (2017)
https://doi.org/10.1063/1.5017356
Design evaluation of safety factors for reflector skeleton made of polymer composites
AIP Conf. Proc. 1915, 040009 (2017)
https://doi.org/10.1063/1.5017357
Evaluating the effect of damping structures in the design of a locomotive cab during a collision
AIP Conf. Proc. 1915, 040011 (2017)
https://doi.org/10.1063/1.5017359
Numerical study of the influence of the thickness and roughness of TiN coatings on their wear in scratch testing
AIP Conf. Proc. 1915, 040012 (2017)
https://doi.org/10.1063/1.5017360
A simplified method to determine resistance to rapid crack propagation in polyethylene pipes
AIP Conf. Proc. 1915, 040013 (2017)
https://doi.org/10.1063/1.5017361
Car suspension system monitoring under road conditions
AIP Conf. Proc. 1915, 040014 (2017)
https://doi.org/10.1063/1.5017362
Physical-chemical purification of power metal optics for increasing its service life
AIP Conf. Proc. 1915, 040016 (2017)
https://doi.org/10.1063/1.5017364
Differential evaluation of the magnetic state of wire packages
AIP Conf. Proc. 1915, 040017 (2017)
https://doi.org/10.1063/1.5017365
Complex large-scale convection of a viscous incompressible fluid with heat exchange according to Newton’s law
AIP Conf. Proc. 1915, 040019 (2017)
https://doi.org/10.1063/1.5017367
Fracture surface analysis of a quenched (α+β)-metastable titanium alloy
AIP Conf. Proc. 1915, 040021 (2017)
https://doi.org/10.1063/1.5017369
Intersubjective decision-making for computer-aided forging technology design
AIP Conf. Proc. 1915, 040022 (2017)
https://doi.org/10.1063/1.5017370
Linear solver performance in elastoplastic problem solution on GPU cluster
AIP Conf. Proc. 1915, 040023 (2017)
https://doi.org/10.1063/1.5017371
Features of electromagnetic processes in electric gas turbine installations
AIP Conf. Proc. 1915, 040024 (2017)
https://doi.org/10.1063/1.5017372
Studying the compactibility of the VT22 high-strength alloy powder obtained by the PREP method
AIP Conf. Proc. 1915, 040029 (2017)
https://doi.org/10.1063/1.5017377
Evolution of surface defects in platinum alloy wire under drawing
AIP Conf. Proc. 1915, 040032 (2017)
https://doi.org/10.1063/1.5017380
Finite element modeling of the upsetting of an anisotropic cylindrical workpiece
AIP Conf. Proc. 1915, 040033 (2017)
https://doi.org/10.1063/1.5017381
The properties of coke breeze briquettes produced by ram briquetting
AIP Conf. Proc. 1915, 040034 (2017)
https://doi.org/10.1063/1.5017382
Synthesis and adsorption properties of hollow tubular alumina fibers
AIP Conf. Proc. 1915, 040035 (2017)
https://doi.org/10.1063/1.5017383
Small sample estimation of the reliability function for technical products
AIP Conf. Proc. 1915, 040036 (2017)
https://doi.org/10.1063/1.5017384
The dependency of mechanical properties on the microstructure anisotropy index of some alloyed steels
AIP Conf. Proc. 1915, 040037 (2017)
https://doi.org/10.1063/1.5017385
Subminiature eddy-current transducers designed to study welded joints of titanium alloys
AIP Conf. Proc. 1915, 040038 (2017)
https://doi.org/10.1063/1.5017386
Estimation of metallic structure durability for a known law of stress variation
AIP Conf. Proc. 1915, 040039 (2017)
https://doi.org/10.1063/1.5017387
Numerical simulation of the temperature field and microwave absorption by carbon nanotubes and polymer composites
AIP Conf. Proc. 1915, 040040 (2017)
https://doi.org/10.1063/1.5017388
Analyzing the surface accuracy of a rigid reflector under mechanical and thermal loading
AIP Conf. Proc. 1915, 040041 (2017)
https://doi.org/10.1063/1.5017389
Justification of rational parameters of briquetting using mechanic activation techniques
AIP Conf. Proc. 1915, 040042 (2017)
https://doi.org/10.1063/1.5017390
Influence of stress concentrator shape and testing temperature on impact bending fracture of 17Mn1Si pipe steel
AIP Conf. Proc. 1915, 040044 (2017)
https://doi.org/10.1063/1.5017392
Bimodal metal micro-nanopowders for powder injection molding
AIP Conf. Proc. 1915, 040045 (2017)
https://doi.org/10.1063/1.5017393
Influence of ultrasound and discrete basalt fibers on the properties of ultrahigh molecular weight polyethylene
AIP Conf. Proc. 1915, 040046 (2017)
https://doi.org/10.1063/1.5017394
Simulation of a viscous flow in layered composites in view of the thermocapillary effect
AIP Conf. Proc. 1915, 040047 (2017)
https://doi.org/10.1063/1.5017395
Eddy-current testing of fatigue degradation upon contact fatigue loading of gas powder laser clad NiCrBSi–Cr3C2 composite coating
R. A. Savrai; A. V. Makarov; E. S. Gorkunov; N. N. Soboleva; L. Kh. Kogan; I. Yu. Malygina; A. L. Osintseva; N. A. Davydova
AIP Conf. Proc. 1915, 040049 (2017)
https://doi.org/10.1063/1.5017397
An X-FEM model of crack propagation in the matrix of randomly reinforced heterogeneous media
AIP Conf. Proc. 1915, 040051 (2017)
https://doi.org/10.1063/1.5017399
A genetic algorithm used for solving one optimization problem
AIP Conf. Proc. 1915, 040052 (2017)
https://doi.org/10.1063/1.5017400
A method for calculating the plastic anisotropy constants of the Hill theory
AIP Conf. Proc. 1915, 040053 (2017)
https://doi.org/10.1063/1.5017401
Solving a degenerate nonlinear parabolic equation with a specified source function by the boundary element method
AIP Conf. Proc. 1915, 040054 (2017)
https://doi.org/10.1063/1.5017402
Technological parameters of welding of branch saddles to polyethylene pipes at low temperatures
AIP Conf. Proc. 1915, 040056 (2017)
https://doi.org/10.1063/1.5017404
Calculation of the technological parameters of electrofusion welding of polyethylene pipes at low temperatures
AIP Conf. Proc. 1915, 040057 (2017)
https://doi.org/10.1063/1.5017405
The generalized fracture criteria based on the multi-parameter representation of the crack tip stress field
AIP Conf. Proc. 1915, 040058 (2017)
https://doi.org/10.1063/1.5017406
Methods for predicting dynamic loading of friction disks
AIP Conf. Proc. 1915, 040060 (2017)
https://doi.org/10.1063/1.5017408
Finite element analysis of the upsetting of a 5056 aluminum alloy sample with consideration of its microstructure
AIP Conf. Proc. 1915, 040063 (2017)
https://doi.org/10.1063/1.5017411
A model of the gas analysis system operation process
AIP Conf. Proc. 1915, 040065 (2017)
https://doi.org/10.1063/1.5017413
Investigation of natural oscillations of a viscous liquid in an elastic tube
AIP Conf. Proc. 1915, 040066 (2017)
https://doi.org/10.1063/1.5017414
A model of high-rate indentation of a cylindrical striking pin into a deformable body
AIP Conf. Proc. 1915, 040067 (2017)
https://doi.org/10.1063/1.5017415
Choosing the optimal Pareto composition of the charge material for the manufacture of composite blanks
AIP Conf. Proc. 1915, 040068 (2017)
https://doi.org/10.1063/1.5017416
High-temperature short-term creep of the Grade 2 and Ti-5Al titanium alloys under heating in air and helium
AIP Conf. Proc. 1915, 040069 (2017)
https://doi.org/10.1063/1.5017417
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.