Skip Nav Destination

Issues

Select Decade

Select Year

Issue

PRELIMINARY

Preface: The 32nd International Conference of the Polymer Processing Society

AIP Conf. Proc. 1914, 010001 (2017) https://doi.org/10.1063/1.5016685

View articletitled, Preface: The 32nd International Conference of the Polymer Processing Society

Open the PDF for in another window

Committee Sponsors: The 32nd International Conference of the Polymer Processing Society

AIP Conf. Proc. 1914, 010002 (2017) https://doi.org/10.1063/1.5016686

View articletitled, Committee Sponsors: The 32nd International Conference of the Polymer Processing Society

Open the PDF for in another window

SESSION : S01 - BLOW MOLDING, THERMOFORMING AND ROTOMOLDING

Optimization of the IR-heating phase in thermoforming of thermoplastic sheets: Characterization and modelling

B. Buffel; B. Van Mieghem; A. Van Bael; F. Desplentere

AIP Conf. Proc. 1914, 020001 (2017) https://doi.org/10.1063/1.5016687

Abstract

View articletitled, Optimization of the IR-heating phase in thermoforming of thermoplastic sheets: Characterization and modelling

Open the PDF for in another window

SESSION : S02 - NANOCOMPOSITES AND FILLED POLYMERS

Polymer - Carbon nanotube composites for thermoelectric applications

J. Luo; B. Krause; P. Pötschke

AIP Conf. Proc. 1914, 030001 (2017) https://doi.org/10.1063/1.5016688

Abstract

View articletitled, Polymer - Carbon nanotube composites for thermoelectric applications

Open the PDF for in another window

Fiber length reduction during shearing in polymer processing

Elmar Moritzer; Gilmar Heiderich

AIP Conf. Proc. 1914, 030002 (2017) https://doi.org/10.1063/1.5016689

Abstract

View articletitled, Fiber length reduction during shearing in polymer processing

Open the PDF for in another window

Determination of the optimum coupling agent content for composites based on hemp and high density polyethylene

Denis Rodrigue; Azam Kavianiboroujeni; Alain Cloutier

AIP Conf. Proc. 1914, 030003 (2017) https://doi.org/10.1063/1.5016690

Abstract

View articletitled, Determination of the optimum coupling agent content for composites based on hemp and high density polyethylene

Open the PDF for in another window

Rheology and physical characterization of graphene nanoplatelet/poly (butylene adipate-co-terephthalate) nanocomposites

Sima Kashi; Rahul K. Gupta; Nhol Kao; Sati N. Bhattacharya

AIP Conf. Proc. 1914, 030004 (2017) https://doi.org/10.1063/1.5016691

Abstract

View articletitled, Rheology and physical characterization of graphene nanoplatelet/poly (butylene adipate-co-terephthalate) nanocomposites

Open the PDF for in another window

Optimization and modelling of delignification process for nanocrystalline cellulose production from rice husk biomass

Md. Sakinul Islam; Nhol Kao; Sati N. Bhattacharya; Rahul Gupta

AIP Conf. Proc. 1914, 030005 (2017) https://doi.org/10.1063/1.5016692

Abstract

View articletitled, Optimization and modelling of delignification process for nanocrystalline cellulose production from rice husk biomass

Open the PDF for in another window

Thermal conductivity of hybrid filled HDPE nanocomposites

M. T. Müller; B. Krause; B. Kretzschmar; I. Jahn; P. Pötschke

AIP Conf. Proc. 1914, 030006 (2017) https://doi.org/10.1063/1.5016693

Abstract

View articletitled, Thermal conductivity of hybrid filled HDPE nanocomposites

Open the PDF for in another window

Influence of mixing conditions on carbon nanotube shortening and curling in polycarbonate composites

B. Krause; J. Carval; P. Pötschke

AIP Conf. Proc. 1914, 030007 (2017) https://doi.org/10.1063/1.5016694

Abstract

View articletitled, Influence of mixing conditions on carbon nanotube shortening and curling in polycarbonate composites

Open the PDF for in another window

PP/SWCNT composites modified with ionic liquid

B. Krause; M. Predtechenskiy; E. Ilin; P. Pötschke

AIP Conf. Proc. 1914, 030008 (2017) https://doi.org/10.1063/1.5016695

Abstract

View articletitled, PP/SWCNT composites modified with ionic liquid

Open the PDF for in another window

Influence of graphite and SEBS addition on thermal and electrical conductivity and mechanical properties of polypropylene composites

B. Krause; A. Cohnen; P. Pötschke; T. Hickmann; D. Koppler; B. Proksch; T. Kersting; Ch. Hopmann

AIP Conf. Proc. 1914, 030009 (2017) https://doi.org/10.1063/1.5016696

Abstract

View articletitled, Influence of graphite and SEBS addition on thermal and electrical conductivity and mechanical properties of polypropylene composites

Open the PDF for in another window

Crystalline nanocellulose in biodegradable polyester nanocomposites prepared by in situ polymerization

Ashley Clarke; Alexandros A. Vasileiou; Marianna Kontopoulou

AIP Conf. Proc. 1914, 030010 (2017) https://doi.org/10.1063/1.5016697

Abstract

View articletitled, Crystalline nanocellulose in biodegradable polyester nanocomposites prepared by in situ polymerization

Open the PDF for in another window

Impact of synthesis temperature on structure of carbon nanotubes and morphological and electrical characterization of their polymeric nanocomposites

Mohammad Arjmand; Seyyed Alireza Mirkhani; Petra Pötschke; Beate Krause; Uttandaraman Sundararaj

AIP Conf. Proc. 1914, 030011 (2017) https://doi.org/10.1063/1.5016698

Abstract

View articletitled, Impact of synthesis temperature on structure of carbon nanotubes and morphological and electrical characterization of their polymeric nanocomposites

Open the PDF for in another window

Thermal history effects on moisture absorption of fiber-reinforced polymer composites

Youssef K. Hamidi; Levent Aktas; M. Cengiz Altan

AIP Conf. Proc. 1914, 030012 (2017) https://doi.org/10.1063/1.5016699

Abstract

View articletitled, Thermal history effects on moisture absorption of fiber-reinforced polymer composites

Open the PDF for in another window

AC electrical conductivity, shielding effectiveness and viscoelastic characteristics of nanocomposites based on RTV silicon rubber and nano graphite sheets/carbon black hybrid system

Javad Jeddi; Ali Asghar Katbab

AIP Conf. Proc. 1914, 030013 (2017) https://doi.org/10.1063/1.5016700

Abstract

View articletitled, AC electrical conductivity, shielding effectiveness and viscoelastic characteristics of nanocomposites based on RTV silicon rubber and nano graphite sheets/carbon black hybrid system

Open the PDF for in another window

Influence of filler dispersion and interfacial resistance on thermal conductivity of polypropylene/carbon nanotubes systems

Antonella Patti; Domenico Acierno; Pietro Russo

AIP Conf. Proc. 1914, 030014 (2017) https://doi.org/10.1063/1.5016701

Abstract

View articletitled, Influence of filler dispersion and interfacial resistance on thermal conductivity of polypropylene/carbon nanotubes systems

Open the PDF for in another window

Oxidization of carbon nanofiber and its effect on tensile properties of PAll matrix composite reinforced with carbon nanofiber

K. Enomoto; Y. Takahashi

AIP Conf. Proc. 1914, 030015 (2017) https://doi.org/10.1063/1.5016702

Abstract

View articletitled, Oxidization of carbon nanofiber and its effect on tensile properties of PAll matrix composite reinforced with carbon nanofiber

Open the PDF for in another window

Effect of additives on MWCNT dispersion and electrical percolation in polyamide 12 composites

Robert Socher; Beate Krause; Petra Pötschke

AIP Conf. Proc. 1914, 030016 (2017) https://doi.org/10.1063/1.5016703

Abstract

View articletitled, Effect of additives on MWCNT dispersion and electrical percolation in polyamide 12 composites

Open the PDF for in another window

Microcapsules of poly(methyl metharcylate) containing epoxy resin and multi-walled carbon nanotubes

M. Galip Icduygu; Meltem Asilturk; M. Cengiz Altan

AIP Conf. Proc. 1914, 030017 (2017) https://doi.org/10.1063/1.5016704

Abstract

View articletitled, Microcapsules of poly(methyl metharcylate) containing epoxy resin and multi-walled carbon nanotubes

Open the PDF for in another window

Effect of processing sequence on the mechanical and tribological properties of ternary nanocomposites (VGCF-X/PA6/HDPE)

Yu Osada; Yosuke Nishitani; Takeshi Kitano

AIP Conf. Proc. 1914, 030018 (2017) https://doi.org/10.1063/1.5016705

Abstract

View articletitled, Effect of processing sequence on the mechanical and tribological properties of ternary nanocomposites (VGCF-X/PA6/HDPE)

Open the PDF for in another window

Melt mixing functionalized graphite nanoplates into PC/SAN blends

M. C. Paiva; E. P. Cunha; O. Voigt; M. Liebscher; F. Simon; J. Pionteck; P. Pötschke

AIP Conf. Proc. 1914, 030019 (2017) https://doi.org/10.1063/1.5016706

Abstract

View articletitled, Melt mixing functionalized graphite nanoplates into PC/SAN blends

Open the PDF for in another window

Characterization of nanocomposites for hydrogen storage

Amanda D. Oliveira; Cesar A. G. Beatrice; Fabio R. Passador; Luiz A. Pessan

AIP Conf. Proc. 1914, 030020 (2017) https://doi.org/10.1063/1.5016707

Abstract

View articletitled, Characterization of nanocomposites for hydrogen storage

Open the PDF for in another window

Polymer nanocomposites for hydrogen storage

Cesar A. G. Beatrice; Amanda D. Oliveira; Fabio R. Passador; Luiz A. Pessan

AIP Conf. Proc. 1914, 030021 (2017) https://doi.org/10.1063/1.5016708

Abstract

View articletitled, Polymer nanocomposites for hydrogen storage

Open the PDF for in another window

Influence of matrix crystallinity on electrical percolation of multiwalled carbon nanotubes in polypropylene

M. Gültner; L. Häußler; P. Pötschke

AIP Conf. Proc. 1914, 030022 (2017) https://doi.org/10.1063/1.5016709

Abstract

View articletitled, Influence of matrix crystallinity on electrical percolation of multiwalled carbon nanotubes in polypropylene

Open the PDF for in another window

Bio-based epoxy clay nanocomposites

Andres Rigail-Cedeño; Daniel F. Schmidt

AIP Conf. Proc. 1914, 030023 (2017) https://doi.org/10.1063/1.5016710

Abstract

View articletitled, Bio-based epoxy clay nanocomposites

Open the PDF for in another window

SESSION : S03 - EXTRUSION AND EXTRUSION PROCESSES

Development of a method for a realistically and reproducible contamination of polymer melt filters

Volker Schöppner; Peter Meilwes

AIP Conf. Proc. 1914, 040001 (2017) https://doi.org/10.1063/1.5016711

Abstract

View articletitled, Development of a method for a realistically and reproducible contamination of polymer melt filters

Open the PDF for in another window

Opportunities and challenges of profile extrusion dies produced by additive manufacturing processes

Nafi Yesildag; Christian Hopmann; Christian Windeck; Sebastian Bremen; Konrad Wissenbach; Simon Merkt

AIP Conf. Proc. 1914, 040002 (2017) https://doi.org/10.1063/1.5016712

Abstract

View articletitled, Opportunities and challenges of profile extrusion dies produced by additive manufacturing processes

Open the PDF for in another window

First insight into the high speed extrusion of polycarbonate

V. Schöppner; M. Pohl

AIP Conf. Proc. 1914, 040003 (2017) https://doi.org/10.1063/1.5016713

Abstract

View articletitled, First insight into the high speed extrusion of polycarbonate

Open the PDF for in another window

Experimental and theoretical study on starve fed single screw extrusion of polymer blends

K. J. Wilczyński; A. Nastaj; A. Lewandowski; K. Wilczyński

AIP Conf. Proc. 1914, 040004 (2017) https://doi.org/10.1063/1.5016714

Abstract

View articletitled, Experimental and theoretical study on starve fed single screw extrusion of polymer blends

Open the PDF for in another window

Study of the rheological behavior of polypropylene/polyethylene extruded mixture using an instrumented die

Ghinwa El Hajj Sleiman; Isabelle Petit; Nadine Allanic; Sofiane Belhabib; Yannick Madec; Julien Launay; Rémi Deterre

AIP Conf. Proc. 1914, 040005 (2017) https://doi.org/10.1063/1.5016715

Abstract

View articletitled, Study of the rheological behavior of polypropylene/polyethylene extruded mixture using an instrumented die

Open the PDF for in another window

Synthesis and tribological investigation of PVD hard coatings deposited via hybrid dcMS/HPPMS for application in plastics processing

K. Bobzin; T. Brögelmann; N. C. Kruppe; M. Naderi

AIP Conf. Proc. 1914, 040006 (2017) https://doi.org/10.1063/1.5016716

Abstract

View articletitled, Synthesis and tribological investigation of PVD hard coatings deposited via hybrid dcMS/HPPMS for application in plastics processing

Open the PDF for in another window

Electrification of polymers during capillary extrusion

A. Perolo; A. Castiglioni; D. Ferri

AIP Conf. Proc. 1914, 040007 (2017) https://doi.org/10.1063/1.5016717

Abstract

View articletitled, Electrification of polymers during capillary extrusion

Open the PDF for in another window

SESSION : S04 - POLYMER BLEND AND ALLOYS

Transformation of homocrystallite/stereocomplex crystallite of PLLA/PDLA blended filament during the heating process

Huan-Chieh Ko; Tien-Wei Shyr

AIP Conf. Proc. 1914, 050001 (2017) https://doi.org/10.1063/1.5016718

Abstract

View articletitled, Transformation of homocrystallite/stereocomplex crystallite of PLLA/PDLA blended filament during the heating process

Open the PDF for in another window

Inducing conductivity in immiscible PS/PP blends by a percolated polyaniline/PA filler selectively localised by specific interactions

Avanish Bharatia; Prakhyat Hejmadyb; Ruth Cardinaels; Jin Won Seo; Paula Moldenaersa

AIP Conf. Proc. 1914, 050002 (2017) https://doi.org/10.1063/1.5016719

Abstract

View articletitled, Inducing conductivity in immiscible PS/PP blends by a percolated polyaniline/PA filler selectively localised by specific interactions

Open the PDF for in another window

Production of PBT/PC particle systems by wet grinding

Jochen Schmidt; Stefan Romeis; Wolfgang Peukert

AIP Conf. Proc. 1914, 050003 (2017) https://doi.org/10.1063/1.5016720

Abstract

View articletitled, Production of PBT/PC particle systems by wet grinding

Open the PDF for in another window

SESSION : S05 - POLYMER FOAMS AND LIGHTWEIGHT STRUCTURES

Welding quality in polymer bead foams: An in situ SEM study

Julia Gensel; Christin Pawelski; Volker Altstädt

AIP Conf. Proc. 1914, 060001 (2017) https://doi.org/10.1063/1.5016721

Abstract

View articletitled, Welding quality in polymer bead foams: An <em>in situ</em> SEM study

Open the PDF for in another window

Foaming behavior of novatein and blends with polyethylene compatibilised by maleic anhydride

Chanelle Gavin; Mark C. Lay; Casparus J. R. Verbeek

AIP Conf. Proc. 1914, 060002 (2017) https://doi.org/10.1063/1.5016722

Abstract

View articletitled, Foaming behavior of novatein and blends with polyethylene compatibilised by maleic anhydride

Open the PDF for in another window

Preparation and properties of low density polyethylene-activated carbon composite foams

Darunee Aussawasathien; Kotchaporn Jariyakun; Thongchai Pomrawan; Kittipong Hrimchum; Rungsima Yeetsorn; Walaiporn Prissanaroon-Ouajai

AIP Conf. Proc. 1914, 060003 (2017) https://doi.org/10.1063/1.5016723

Abstract

View articletitled, Preparation and properties of low density polyethylene-activated carbon composite foams

Open the PDF for in another window

Laser transmission welding of foamed thermoplastic injection moulded parts

Christian Hopmann; Suveni Kreimeier; Maximilian Schöngart

AIP Conf. Proc. 1914, 060004 (2017) https://doi.org/10.1063/1.5016724

Abstract

View articletitled, Laser transmission welding of foamed thermoplastic injection moulded parts

Open the PDF for in another window

Natural unidirectional sheet processes for fibre reinforced bioplastics

Ahmed-Amine Ouali; Roman Rinberg; Wolfgang Nendel; Lothar Kroll; Carolin Siegel; Beate Buchelt; André Wagenführ; Katja Trommler; Katja Schreiter; Rico John; Stefan Spange

AIP Conf. Proc. 1914, 060005 (2017) https://doi.org/10.1063/1.5016725

Abstract

View articletitled, Natural unidirectional sheet processes for fibre reinforced bioplastics

Open the PDF for in another window

Preparation and characterization of conductive foams based on PBS, carbon nanofibers and expanded graphite nanocomposites

Livia Cafiero; Maria Oliviero; Giovanni Landi; Luigi Sorrentino; Andrea Sorrentino; Heinz C. Neitzert; Salvatore Iannace

AIP Conf. Proc. 1914, 060006 (2017) https://doi.org/10.1063/1.5016726

Abstract

View articletitled, Preparation and characterization of conductive foams based on PBS, carbon nanofibers and expanded graphite nanocomposites

Open the PDF for in another window

Effect of processing conditions on the cell morphology distribution in foamed injection molded PLA samples

Valentina Volpe; Martina De Filitto; Vera Klofacova; Felice De Santis; Roberto Pantani

AIP Conf. Proc. 1914, 060007 (2017) https://doi.org/10.1063/1.5016727

Abstract

View articletitled, Effect of processing conditions on the cell morphology distribution in foamed injection molded PLA samples

Open the PDF for in another window

SESSION : S06 - BIOPOLYMERS AND POLYMER FROM RENEWABLE RESOURCES

Improvement of mechanical properties due to increased fibre matrix adhesion in flax fibre reinforced polypropylene

Malfatti Andrea; Steuernagel Leif; Meiners Dieter

AIP Conf. Proc. 1914, 070001 (2017) https://doi.org/10.1063/1.5016728

Abstract

View articletitled, Improvement of mechanical properties due to increased fibre matrix adhesion in flax fibre reinforced polypropylene

Open the PDF for in another window

An investigation between high and low pressure processes for nanocrystalline cellulose production from agro-waste biomass

Md. Sakinul Islam; Nhol Kao; Sati N. Bhattacharya; Rahul Gupta

AIP Conf. Proc. 1914, 070002 (2017) https://doi.org/10.1063/1.5016729

Abstract

View articletitled, An investigation between high and low pressure processes for nanocrystalline cellulose production from agro-waste biomass

Open the PDF for in another window

Influence of initial fiber length on the mechanical and tribological properties of hemp fiber reinforced plants-derived polyamide 1010 biomass composites

Yosuke Nishitani; Jun Mukaida; Toshiyuki Yamanaka; Tetsuto Kajiyama; Takeshi Kitano

AIP Conf. Proc. 1914, 070003 (2017) https://doi.org/10.1063/1.5016730

Abstract

View articletitled, Influence of initial fiber length on the mechanical and tribological properties of hemp fiber reinforced plants-derived polyamide 1010 biomass composites

Open the PDF for in another window

PBAT/thermoplastic starch blends: “Effects of oxidized starch and compatibilizer content”

Buse Nur Can; Guralp Ozkoc

AIP Conf. Proc. 1914, 070004 (2017) https://doi.org/10.1063/1.5016731

Abstract

View articletitled, PBAT/thermoplastic starch blends: “Effects of oxidized starch and compatibilizer content”

Open the PDF for in another window

Effects of epoxy-POSS nanoparticles on the properties of PLA/TPU blends

Nilay Tuccar Kilic; Buse Nur Can; Mehmet Kodal; Guralp Ozkoc

AIP Conf. Proc. 1914, 070005 (2017) https://doi.org/10.1063/1.5016732

Abstract

View articletitled, Effects of epoxy-POSS nanoparticles on the properties of PLA/TPU blends

Open the PDF for in another window

Novel phosphate-free alternatives for silicate resins applied in sewer rehabilitation

Mark Kopietz; Sergiy Grishchuk; Bernd Wetzel

AIP Conf. Proc. 1914, 070006 (2017) https://doi.org/10.1063/1.5016733

Abstract

View articletitled, Novel phosphate-free alternatives for silicate resins applied in sewer rehabilitation

Open the PDF for in another window

Influence of process route on the mechanical properties of polymer based intravaginal drug delivery systems

K. Eggenreich; S. Schrank; G. Koscher; K. Nickisch; E. Roblegg; J. Khinast

AIP Conf. Proc. 1914, 070007 (2017) https://doi.org/10.1063/1.5016734

Abstract

View articletitled, Influence of process route on the mechanical properties of polymer based intravaginal drug delivery systems

Open the PDF for in another window

Cellulose-xyloglucan composite film processing using ionic liquids as co-solvents

Amine Bendaoud; Jean-Eudes Maigret; Eric Leroy; Bernard Cathala; Denis Lourdin

AIP Conf. Proc. 1914, 070008 (2017) https://doi.org/10.1063/1.5016735

Abstract

View articletitled, Cellulose-xyloglucan composite film processing using ionic liquids as co-solvents

Open the PDF for in another window

Preparation of modified-TiO₂/PLA nanocomposite films: Micromorphology, photo-degradability and antibacterial studies

Kamand Rabiei Tabriz; Ali Asghar Katbab

AIP Conf. Proc. 1914, 070009 (2017) https://doi.org/10.1063/1.5016736

Abstract

View articletitled, Preparation of modified-TiO<sub>2</sub>/PLA nanocomposite films: Micromorphology, photo-degradability and antibacterial studies

Open the PDF for in another window

Welding of bio-based plastics for applications in the field of injection moulding

Christian Hopmann; Martin Facklam; Maximilian Schöngart

AIP Conf. Proc. 1914, 070010 (2017) https://doi.org/10.1063/1.5016737

Abstract

View articletitled, Welding of bio-based plastics for applications in the field of injection moulding

Open the PDF for in another window

Mechanical and durability properties of soft PVC plasticized by cardanol derivatives

Antonio Greco; Francesca Ferrari; Alfonso Maffezzoli

AIP Conf. Proc. 1914, 070011 (2017) https://doi.org/10.1063/1.5016738

Abstract

View articletitled, Mechanical and durability properties of soft PVC plasticized by cardanol derivatives

Open the PDF for in another window

Biodegradable polyesters reinforced with eucalyptus fiber: Effect of reactive agents

P. Nanthananon; M. Seadan; S. Pivsa-Art; H. Hiroyuki; S. Suttiruengwong

AIP Conf. Proc. 1914, 070012 (2017) https://doi.org/10.1063/1.5016739

Abstract

View articletitled, Biodegradable polyesters reinforced with eucalyptus fiber: Effect of reactive agents

Open the PDF for in another window

Electrospun core-shell nanofibers based on thermoplastic urethane elastomer and gelatin: Evolution of cell behavior

Mahsa Jafaie Menarbabzari; Ali Asghar Katbab

AIP Conf. Proc. 1914, 070013 (2017) https://doi.org/10.1063/1.5016740

Abstract

View articletitled, Electrospun core-shell nanofibers based on thermoplastic urethane elastomer and gelatin: Evolution of cell behavior

Open the PDF for in another window

SESSION : S07 - PROCESS MODELING AND SIMULATION

Analysis of pellet diameter and inorganic filler influences on the polymer melting behavior in planetary roller extruders

Johannes Rudloff; Marieluise Lang; Karsten Kretschmer; Peter Heidemeyer; Martin Bastian; Michael Koch

AIP Conf. Proc. 1914, 080001 (2017) https://doi.org/10.1063/1.5016741

Abstract

View articletitled, Analysis of pellet diameter and inorganic filler influences on the polymer melting behavior in planetary roller extruders

Open the PDF for in another window

Investigation of the influence of material and pellet shape on the dissipation in the solids conveying zone of single-screw extruders based on the discrete element method (DEM)

Jan Trippe; Volker Schöppner

AIP Conf. Proc. 1914, 080002 (2017) https://doi.org/10.1063/1.5016742

Abstract

View articletitled, Investigation of the influence of material and pellet shape on the dissipation in the solids conveying zone of single-screw extruders based on the discrete element method (DEM)

Open the PDF for in another window

Erosion in extruder flows: Analytical and numerical study

Miron Kaufman; Petru S. Fodor

AIP Conf. Proc. 1914, 080003 (2017) https://doi.org/10.1063/1.5016743

Abstract

View articletitled, Erosion in extruder flows: Analytical and numerical study

Open the PDF for in another window

Modeling and optimization of melt filtration systems in polymer recycling

Sophie Pachner; Michael Aigner; Jürgen Miethlinger

AIP Conf. Proc. 1914, 080004 (2017) https://doi.org/10.1063/1.5016744

Abstract

View articletitled, Modeling and optimization of melt filtration systems in polymer recycling

Open the PDF for in another window

Experimental study of polymer degassing in an agitator vessel

Stefan Hirschfeld; Olaf Wünsch

AIP Conf. Proc. 1914, 080005 (2017) https://doi.org/10.1063/1.5016745

Abstract

View articletitled, Experimental study of polymer degassing in an agitator vessel

Open the PDF for in another window

Modeling devolatilization in single- and multi-screw extruders

Christian Marschik; Bernhard Löw-Baselli; Jürgen Miethlinger

AIP Conf. Proc. 1914, 080006 (2017) https://doi.org/10.1063/1.5016746

Abstract

View articletitled, Modeling devolatilization in single- and multi-screw extruders

Open the PDF for in another window

SESSION : S08 - PROCESS MONITORING, CONTROL AND SENSORS

Development of a novel and adaptable injection unit for an automated and quality controlled manufacturing of RTM parts for aerospace applications

Christian Hopmann; Marc Linus Fecher; Arne Boettcher; Kai Fischer; Lionel Winkelmann

AIP Conf. Proc. 1914, 090001 (2017) https://doi.org/10.1063/1.5016747

Abstract

View articletitled, Development of a novel and adaptable injection unit for an automated and quality controlled manufacturing of RTM parts for aerospace applications

Open the PDF for in another window

Compensating viscosity fluctuations in injection moulding

M. Theunissen, Dipl.-Ing.; Ch. Hopmann; J. Heinisch, M. Sc.

AIP Conf. Proc. 1914, 090002 (2017) https://doi.org/10.1063/1.5016748

Abstract

View articletitled, Compensating viscosity fluctuations in injection moulding

Open the PDF for in another window

An approach to non-destructive testing of aged polymers

Elmar Moritzer; Matthias Hüttner; Bernd Henning; Manuel Webersen

AIP Conf. Proc. 1914, 090003 (2017) https://doi.org/10.1063/1.5016749

Abstract

View articletitled, An approach to non-destructive testing of aged polymers

Open the PDF for in another window

Tensile impact testing on polymer materials considering the force-oscillation phenomenon

Christian Hopmann; Jan Klein; Maximilian Schöngart

AIP Conf. Proc. 1914, 090004 (2017) https://doi.org/10.1063/1.5016750

Abstract

View articletitled, Tensile impact testing on polymer materials considering the force-oscillation phenomenon

Open the PDF for in another window

Spatially resolved temperature measurement in injection moulding using ultrasound tomography

Christian Hopmann; Jens Wipperfürth; Maximilian Schöngart

AIP Conf. Proc. 1914, 090005 (2017) https://doi.org/10.1063/1.5016751

Abstract

View articletitled, Spatially resolved temperature measurement in injection moulding using ultrasound tomography

Open the PDF for in another window

On the exploitation of optical signal from Raman spectroscopy for in-situ conversion monitoring of emulsion polymerization

E. Dropsit; D. Chapron; P. Bourson; S. Hoppe; A. Durand

AIP Conf. Proc. 1914, 090006 (2017) https://doi.org/10.1063/1.5016752

Abstract

View articletitled, On the exploitation of optical signal from Raman spectroscopy for in-situ conversion monitoring of emulsion polymerization

Open the PDF for in another window

Swelling and drying process in ionic hydrogels for low and high pH using fluorescence technique

Demet Kaya Aktaş

AIP Conf. Proc. 1914, 090007 (2017) https://doi.org/10.1063/1.5016753

Abstract

View articletitled, Swelling and drying process in ionic hydrogels for low and high pH using fluorescence technique

Open the PDF for in another window

SESSION : S09 - REACTIVE PROCESSING

Production of CFRP components with clear surface layer in the PU spray impregnation process

Christian Hopmann; Christos Karatzias; Regina Wagner; Arne Boettcher; Kai Fischer

AIP Conf. Proc. 1914, 100001 (2017) https://doi.org/10.1063/1.5016754

Abstract

View articletitled, Production of CFRP components with clear surface layer in the PU spray impregnation process

Open the PDF for in another window

The interplay between molecular dynamics and reaction kinetics during curing reactions

Jürgen E. K. Schawe

AIP Conf. Proc. 1914, 100002 (2017) https://doi.org/10.1063/1.5016755

Abstract

View articletitled, The interplay between molecular dynamics and reaction kinetics during curing reactions

Open the PDF for in another window

SESSION : S10 - RHEOLOGY AND RHEOMETRY

Low-field RheoNMR: Newly developed combination of rheology and time domain (TD)-NMR to correlate mechanical properties with molecular dynamics in polymer melts

Volker Räntzsch; Mürüvvet Begüm Özen; Karl-Friedrich Ratzsch; Gisela Guthausen; Manfred Wilhelm

AIP Conf. Proc. 1914, 110001 (2017) https://doi.org/10.1063/1.5016756

Abstract

View articletitled, Low-field RheoNMR: Newly developed combination of rheology and time domain (TD)-NMR to correlate mechanical properties with molecular dynamics in polymer melts

Open the PDF for in another window

Elongational rheology of glass-fiber and natural-fiber-reinforced polypropylenes with a novel online rheometer

Hans-Jürgen Luger; Thomas Köpplmayr; Lukas Sobczak; Andreas Haider; Jürgen Miethlinger

AIP Conf. Proc. 1914, 110002 (2017) https://doi.org/10.1063/1.5016757

Abstract

View articletitled, Elongational rheology of glass-fiber and natural-fiber-reinforced polypropylenes with a novel online rheometer

Open the PDF for in another window

Rheological characterization of macromolecular colloidal gels as simulant of bronchial mucus

Olivier Lafforgue; Sébastien Poncet; Isabelle Seyssiecq; Julien Favier

AIP Conf. Proc. 1914, 110003 (2017) https://doi.org/10.1063/1.5016758

Abstract

View articletitled, Rheological characterization of macromolecular colloidal gels as simulant of bronchial mucus

Open the PDF for in another window

SESSION : S11 - ELASTOMERS AND THERMOPLASTIC ELASTOMERS

Two-component injection moulding of thermoplastics with thermoset rubbers: Process development

G. Bex; J. De Keyzer; F. Desplentere; A. Van Bael

AIP Conf. Proc. 1914, 120001 (2017) https://doi.org/10.1063/1.5016759

Abstract

View articletitled, Two-component injection moulding of thermoplastics with thermoset rubbers: Process development

Open the PDF for in another window

The effect of lipid absorption on the mechanical properties of poly(styrene-block-isobutylene-block-styrene) for use in biomedical applications

Alexandra Damley-Strnad; Mauro Fittipaldi; Brigitte Morales; Landon R. Grace

AIP Conf. Proc. 1914, 120002 (2017) https://doi.org/10.1063/1.5016760

Abstract

View articletitled, The effect of lipid absorption on the mechanical properties of poly(styrene-block-isobutylene-block-styrene) for use in biomedical applications

Open the PDF for in another window

Novel silicone thermoplastic elastomers with tailored permeation properties

Gisbert Riess; Katrin Berger; Wolfgang Kern

AIP Conf. Proc. 1914, 120003 (2017) https://doi.org/10.1063/1.5016761

Abstract

View articletitled, Novel silicone thermoplastic elastomers with tailored permeation properties

Open the PDF for in another window

SESSION : S12 - FIBER, FILMS, AND MEMBRANES

Polymer structure effects on crystallization and properties in polypropylene film casting

Markus Gahleitner; Daniela Mileva; Dietrich Gloger; René Androsch; Davide Tranchida

AIP Conf. Proc. 1914, 130001 (2017) https://doi.org/10.1063/1.5016762

Abstract

View articletitled, Polymer structure effects on crystallization and properties in polypropylene film casting

Open the PDF for in another window

The effect of additives on high temperature water retention and thermal stability of PFSA polymer composites

Bhawana Agrawal; Monika Willert-Porada

AIP Conf. Proc. 1914, 130002 (2017) https://doi.org/10.1063/1.5016763

Abstract

View articletitled, The effect of additives on high temperature water retention and thermal stability of PFSA polymer composites

Open the PDF for in another window

Corn-bran: Alternative cellulosic filler for polypropylene

Buse Nur Can; Aylin Kuman; Cansu Gozutok; Guralp Ozkoc

AIP Conf. Proc. 1914, 130003 (2017) https://doi.org/10.1063/1.5016764

Abstract

View articletitled, Corn-bran: Alternative cellulosic filler for polypropylene

Open the PDF for in another window

Structure and properties of melt-spun fibers of polyethylene blended with cellulose fibers

Yuta Sekiguchi; Wataru Takarada; Takeshi Kikutani

AIP Conf. Proc. 1914, 130004 (2017) https://doi.org/10.1063/1.5016765

Abstract

View articletitled, Structure and properties of melt-spun fibers of polyethylene blended with cellulose fibers

Open the PDF for in another window

SESSION : S13 - INJECTION MOLDING AND MOLD

Effects of environmental aging in polypropylene obtained by injection molding

Rebeca S. Grecco Romano; Washington Luiz Oliani; Duclerc Fernandes Parra; Ademar Benevolo Lugao

AIP Conf. Proc. 1914, 140001 (2017) https://doi.org/10.1063/1.5016766

Abstract

View articletitled, Effects of environmental aging in polypropylene obtained by injection molding

Open the PDF for in another window

Production of plastics parts with partially or fully metallic surfaces using the in-mould-metal-spraying (IMMS)

Christian Hopmann; Philipp Ochotta; Matthias Theunissen; Sukran Katmer; Kirsten Bobzin; Mehmet Öte; Martin Andreas Knoch; Xifang Liao

AIP Conf. Proc. 1914, 140002 (2017) https://doi.org/10.1063/1.5016767

Abstract

View articletitled, Production of plastics parts with partially or fully metallic surfaces using the in-mould-metal-spraying (IMMS)

Open the PDF for in another window

Development of a highly segmented temperature control in injection moulding for reduced warpage and increased process stability

Ch. Hopmann; M. Schmitz; M. Theunissen; P. Nikoleizig

AIP Conf. Proc. 1914, 140003 (2017) https://doi.org/10.1063/1.5016768

Abstract

View articletitled, Development of a highly segmented temperature control in injection moulding for reduced warpage and increased process stability

Open the PDF for in another window

Experimental investigations on the fibre length degradation in injection moulds

Elmar Moritzer; Yannick Martin

AIP Conf. Proc. 1914, 140004 (2017) https://doi.org/10.1063/1.5016769

Abstract

View articletitled, Experimental investigations on the fibre length degradation in injection moulds

Open the PDF for in another window

Modular technological inserts for injection molding machines

Dorothea Schneider; Volker Reichert, Dr.-Ing.

AIP Conf. Proc. 1914, 140005 (2017) https://doi.org/10.1063/1.5016770

Abstract

View articletitled, Modular technological inserts for injection molding machines

Open the PDF for in another window

Morphology and electrical properties of injection-molded PP carbon-based nanocomposites

M. Zaccone; I. Armentano; L. Torre; F. Cesano; S. Cravanzola; D. Scarano; A. Frache; M. Monti

AIP Conf. Proc. 1914, 140006 (2017) https://doi.org/10.1063/1.5016771

Abstract

View articletitled, Morphology and electrical properties of injection-molded PP carbon-based nanocomposites

Open the PDF for in another window

Effects of fast mold temperature evolution on micro features replication quality during injection molding

S. Liparoti; M. Calaon; V. Speranza; G. Tosello; R. Pantani; N. H. Hansen; G. Titomanlio

AIP Conf. Proc. 1914, 140007 (2017) https://doi.org/10.1063/1.5016772

Abstract

View articletitled, Effects of fast mold temperature evolution on micro features replication quality during injection molding

Open the PDF for in another window

Investigation of nanoparticles emitted when injection molding neat and additive-filled polypropylene and polycarbonate

Matthew Theriault; Suzanne Yoeuth; Jessica Matar; John Martin; Dhimiter Bello; Carol Barry

AIP Conf. Proc. 1914, 140008 (2017) https://doi.org/10.1063/1.5016773

Abstract

View articletitled, Investigation of nanoparticles emitted when injection molding neat and additive-filled polypropylene and polycarbonate

Open the PDF for in another window

Advanced fiber orientation prediction for high filler content short-fiber/thermoplastic composites

Thanh Binh Nguyen Thi; Atsushi Yokoyama; Senji Hamanaka; Katsuhisa Yamashita; Chisato Nonomura

AIP Conf. Proc. 1914, 140009 (2017) https://doi.org/10.1063/1.5016774

Abstract

View articletitled, Advanced fiber orientation prediction for high filler content short-fiber/thermoplastic composites

Open the PDF for in another window

Knowledge-based approach for an automatic rheological optimization of injection-molded parts

A. Porsch; R. Andrae; P. Köhler; J. Wortberg

AIP Conf. Proc. 1914, 140010 (2017) https://doi.org/10.1063/1.5016775

Abstract

View articletitled, Knowledge-based approach for an automatic rheological optimization of injection-molded parts

Open the PDF for in another window

Measurement of fiber orientation distribution in injection-molded composites with high filler content

Senji Hamanaka; Katsuhisa Yamashita; Chisato Nonomura; Thanh Binh Nguyen Thi; Takayuki Wakano; Atsushi Yokoyama

AIP Conf. Proc. 1914, 140011 (2017) https://doi.org/10.1063/1.5016776

Abstract

View articletitled, Measurement of fiber orientation distribution in injection-molded composites with high filler content

Open the PDF for in another window

Design and fabrication of injection mold using gypsum

Chung-Chih Lin; Bean-Yin Lee; Jenn-Yih Chen; Guo-How Lee

AIP Conf. Proc. 1914, 140012 (2017) https://doi.org/10.1063/1.5016777

Abstract

View articletitled, Design and fabrication of injection mold using gypsum

Open the PDF for in another window

SESSION : S14 - MIXING AND COMPOUNDING

Properties of polyamide 6-graphene-composites produced and processed on industrial scale

Nafi Yesildag; Christian Hopmann; Maximilian Adamy; Christian Windeck

AIP Conf. Proc. 1914, 150001 (2017) https://doi.org/10.1063/1.5016778

Abstract

View articletitled, Properties of polyamide 6-graphene-composites produced and processed on industrial scale

Open the PDF for in another window

Investigating the impact of operating conditions on the extent of additive mixing during thermoplastic polymer extrusion

Dmytro Stratiychuk-Dear; Kieran Looney; Paul Oliver; Stuart Blackburn; Mark Simmons

AIP Conf. Proc. 1914, 150002 (2017) https://doi.org/10.1063/1.5016779

Abstract

View articletitled, Investigating the impact of operating conditions on the extent of additive mixing during thermoplastic polymer extrusion

Open the PDF for in another window

Influence of compounding technology on rheological, thermal and mechanical behavior of blast furnace slag filled polystyrene compounds

Abdelhamid Mostafa; Gernot Pacher; Thomas Lucyshyn; Clemens Holzer; Helmut Flachberger; Elke Krischey; Bertram Fritz; Stephan Laske

AIP Conf. Proc. 1914, 150003 (2017) https://doi.org/10.1063/1.5016780

Abstract

View articletitled, Influence of compounding technology on rheological, thermal and mechanical behavior of blast furnace slag filled polystyrene compounds

Open the PDF for in another window

Processing and properties of PLA-HA nanocomposites: The effect of particle morphology and dispersants

Magdalena M. Tomczynska; Michael Ward; Gabriel Y. H. Choong; Kirsty Walton; Davide S. A. De Focatiis; David M. Grant; Derek J. Irvine; Andrew J. Parsons

AIP Conf. Proc. 1914, 150004 (2017) https://doi.org/10.1063/1.5016781

Abstract

View articletitled, Processing and properties of PLA-HA nanocomposites: The effect of particle morphology and dispersants

Open the PDF for in another window

An investigation on dispersion state of graphene in polypropylene/graphite nanocomposite with extensional flow mixing

Koki Matsumoto; Yoji Nakade; Keita Sugimoto; Tatsuya Tanaka

AIP Conf. Proc. 1914, 150005 (2017) https://doi.org/10.1063/1.5016782

Abstract

View articletitled, An investigation on dispersion state of graphene in polypropylene/graphite nanocomposite with extensional flow mixing

Open the PDF for in another window

SESSION : S15 - MORPHOLOGY AND STRUCTURE DEVELOPMENT (HONORING SYMPOSIA - J-M. HAUDIN)

Morphology and structure development during injection molding with fast mold temperature evolution

V. Speranza; S. Liparoti; R. Pantani; G. Titomanlio

AIP Conf. Proc. 1914, 160001 (2017) https://doi.org/10.1063/1.5016783

Abstract

View articletitled, Morphology and structure development during injection molding with fast mold temperature evolution

Open the PDF for in another window

SESSION : S16 - SPECIAL SYMPOSIUM: RECYCLING, PLASTIC SOLUTIONS FOR ECO-CONCEPTION

Manufacturing and characterisation of thermoplastic composite of hemp shives and recycled expanded polystyrene

A. Almusawi; R. Lachat; K. E. Atcholi; S. Tié Bi

AIP Conf. Proc. 1914, 170001 (2017) https://doi.org/10.1063/1.5016784

Abstract

View articletitled, Manufacturing and characterisation of thermoplastic composite of hemp shives and recycled expanded polystyrene

Open the PDF for in another window

Efficiency of recycling post-consumer plastic packages

E. U. Thoden van Velzen; M. Jansen; M. T. Brouwer; A. Feil; K. Molenveld; Th. Pretz, prof.

AIP Conf. Proc. 1914, 170002 (2017) https://doi.org/10.1063/1.5016785

Abstract

View articletitled, Efficiency of recycling post-consumer plastic packages

Open the PDF for in another window

Adsorption mechanisms of emulsified crude oil droplets onto hydrophilic open-cell polymer foams

P. Cherukupally; J. H. Hinestroza; R. Farnood; A. M. Bilton; C. B. Park

AIP Conf. Proc. 1914, 170003 (2017) https://doi.org/10.1063/1.5016786

Abstract

View articletitled, Adsorption mechanisms of emulsified crude oil droplets onto hydrophilic open-cell polymer foams

Open the PDF for in another window

SESSION : S17 - SPECIAL SYMPOSIUM: HIGH PERFORMANCE COMPOSITE PROCESSING

Compression moulding of LFT components with increased quality by variothermal mould technology

Christian Hopmann; Christian Beste; Arne Boettcher; Kai Fischer

AIP Conf. Proc. 1914, 180001 (2017) https://doi.org/10.1063/1.5016787

Abstract

View articletitled, Compression moulding of LFT components with increased quality by variothermal mould technology

Open the PDF for in another window

Rheokinetic studies for in-situ monitoring of T-RTM process: Rheology coupled to dielectric analysis and FTIR spectroscopy

Mohamed Dkier; Khalid Lamnawar; Abderrahim Maazouz

AIP Conf. Proc. 1914, 180002 (2017) https://doi.org/10.1063/1.5016788

Abstract

View articletitled, Rheokinetic studies for in-situ monitoring of T-RTM process: Rheology coupled to dielectric analysis and FTIR spectroscopy

Open the PDF for in another window

Investigation of the matrix influence on the laminate properties of epoxy- and polyurethane-based CFRPs manufactured with HP-RTM-process

F. Behnisch; P. Rosenberg; K. A. Weidenmann; F. Henning

AIP Conf. Proc. 1914, 180003 (2017) https://doi.org/10.1063/1.5016789

Abstract

View articletitled, Investigation of the matrix influence on the laminate properties of epoxy- and polyurethane-based CFRPs manufactured with HP-RTM-process

Open the PDF for in another window

SESSION : S18 - SPECIAL SYMPOSIUM: ADDITIVE MANUFACTURING FOR PLASTIC COMPONENTS

Quality improvement of FDM parts by parameter optimization

F. Knoop; A. Kloke; V. Schoeppner

AIP Conf. Proc. 1914, 190001 (2017) https://doi.org/10.1063/1.5016790

Abstract

View articletitled, Quality improvement of FDM parts by parameter optimization

Open the PDF for in another window

Insights into the development of a short-fiber reinforced polypropylene for laser sintering

R. G. Kleijnen; J. P. W. Sesseg; M. Schmid; K. Wegener

AIP Conf. Proc. 1914, 190002 (2017) https://doi.org/10.1063/1.5016791

Abstract

View articletitled, Insights into the development of a short-fiber reinforced polypropylene for laser sintering

Open the PDF for in another window

3D printing of maize protein by fused deposition modeling

Laurent Chaunier; Eric Leroy; Guy Della Valle; Michèle Dalgalarrondo; Bénédicte Bakan; Didier Marion; Baptiste Madec; Denis Lourdin

AIP Conf. Proc. 1914, 190003 (2017) https://doi.org/10.1063/1.5016792

Abstract

View articletitled, 3D printing of maize protein by fused deposition modeling

Open the PDF for in another window

Viscoelastic modelling of gas pore collapse during polymer sintering

Florian Wohlgemuth; Ingo Alig

AIP Conf. Proc. 1914, 190004 (2017) https://doi.org/10.1063/1.5016793

Abstract

View articletitled, Viscoelastic modelling of gas pore collapse during polymer sintering

Open the PDF for in another window

Cross-linking of laser sintered polyamide 12 and polyethylene parts by gamma irradiation

Andreas Wegner

AIP Conf. Proc. 1914, 190005 (2017) https://doi.org/10.1063/1.5016794

Abstract

View articletitled, Cross-linking of laser sintered polyamide 12 and polyethylene parts by gamma irradiation

Open the PDF for in another window

Effect of particle size on the properties of highly-filled polymers for fused filament fabrication

Christian Kukla; Joamin Gonzalez-Gutierrez; Ivica Duretek; Stephan Schuschnigg; Clemens Holzer

AIP Conf. Proc. 1914, 190006 (2017) https://doi.org/10.1063/1.5016795

Abstract

View articletitled, Effect of particle size on the properties of highly-filled polymers for fused filament fabrication

Open the PDF for in another window

Influence of temperature on the flowability of polymer powders in laser sintering

Michael Van den Eynde; Leander Verbelen; Peter Van Puyvelde

AIP Conf. Proc. 1914, 190007 (2017) https://doi.org/10.1063/1.5016796

Abstract

View articletitled, Influence of temperature on the flowability of polymer powders in laser sintering

Open the PDF for in another window

New approaches towards production of polymer powders for selective laser beam melting of polymers

Jochen Schmidt; Marius Sachs; Stephanie Fanselow; Karl-Ernst Wirth; Wolfgang Peukert

AIP Conf. Proc. 1914, 190008 (2017) https://doi.org/10.1063/1.5016797

Abstract

View articletitled, New approaches towards production of polymer powders for selective laser beam melting of polymers

Open the PDF for in another window

9 - SPECIAL SYMPOSIUM: MICROTECHNOLOGY AND SMART MATERIALS

Micro-FDM process capability and comparison with micro-injection moulding

Vito Basile; Claudia Pagano; Irene Fassi

AIP Conf. Proc. 1914, 200001 (2017) https://doi.org/10.1063/1.5016798

Abstract

View articletitled, Micro-FDM process capability and comparison with micro-injection moulding

Open the PDF for in another window

Frictional properties of plants-derived polyamide against surface microstructures of metal counterpart fabricated by femtosecond laser

Keisuke Nakamura; Yosuke Nishitani; Takeshi Kitano

AIP Conf. Proc. 1914, 200002 (2017) https://doi.org/10.1063/1.5016799

Abstract

View articletitled, Frictional properties of plants-derived polyamide against surface microstructures of metal counterpart fabricated by femtosecond laser

Open the PDF for in another window

Fabrication and characterization of polymeric origami structure for compression properties

Mohamed Ali E. Kshad; Hani E. Naguib

AIP Conf. Proc. 1914, 200003 (2017) https://doi.org/10.1063/1.5016800

Abstract

View articletitled, Fabrication and characterization of polymeric origami structure for compression properties

Open the PDF for in another window

SESSION : S20 - SPECIAL SYMPOSIUM: BIOBASED PLASTICS AND MATERIALS FOR RENEWABLE ENERGY

Tuning the hydrolytic degradation rate of poly-lactic acid (PLA) to more durable applications

Iozzino Valentina; Askanian Haroutioun; Leroux Fabrice; Verney Vincent; Pantani Roberto

AIP Conf. Proc. 1914, 210001 (2017) https://doi.org/10.1063/1.5016801

Abstract

View articletitled, Tuning the hydrolytic degradation rate of poly-lactic acid (PLA) to more durable applications

Open the PDF for in another window

Issues

PRELIMINARY

SESSION : S01 - BLOW MOLDING, THERMOFORMING AND ROTOMOLDING

SESSION : S02 - NANOCOMPOSITES AND FILLED POLYMERS

SESSION : S03 - EXTRUSION AND EXTRUSION PROCESSES

SESSION : S04 - POLYMER BLEND AND ALLOYS

SESSION : S05 - POLYMER FOAMS AND LIGHTWEIGHT STRUCTURES

SESSION : S06 - BIOPOLYMERS AND POLYMER FROM RENEWABLE RESOURCES

SESSION : S07 - PROCESS MODELING AND SIMULATION

SESSION : S08 - PROCESS MONITORING, CONTROL AND SENSORS

SESSION : S09 - REACTIVE PROCESSING

SESSION : S10 - RHEOLOGY AND RHEOMETRY

SESSION : S11 - ELASTOMERS AND THERMOPLASTIC ELASTOMERS

SESSION : S12 - FIBER, FILMS, AND MEMBRANES

SESSION : S13 - INJECTION MOLDING AND MOLD

SESSION : S14 - MIXING AND COMPOUNDING

SESSION : S15 - MORPHOLOGY AND STRUCTURE DEVELOPMENT (HONORING SYMPOSIA - J-M. HAUDIN)

SESSION : S16 - SPECIAL SYMPOSIUM: RECYCLING, PLASTIC SOLUTIONS FOR ECO-CONCEPTION

SESSION : S17 - SPECIAL SYMPOSIUM: HIGH PERFORMANCE COMPOSITE PROCESSING

SESSION : S18 - SPECIAL SYMPOSIUM: ADDITIVE MANUFACTURING FOR PLASTIC COMPONENTS

9 - SPECIAL SYMPOSIUM: MICROTECHNOLOGY AND SMART MATERIALS

SESSION : S20 - SPECIAL SYMPOSIUM: BIOBASED PLASTICS AND MATERIALS FOR RENEWABLE ENERGY

RSS

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

This Feature Is Available To Subscribers Only