Skip Nav Destination
Issues
4 December 2017
In this Issue
PRELIMINARY
Preface: 3rd Advanced Materials Conference 2016–Advanced Materials for Sustainability and Growth (AMC 2016)
AIP Conf. Proc. 1901, 010001 (2017)
https://doi.org/10.1063/1.5010592
Committees: 3rd Advanced Materials Conference 2016–Advanced Materials for Sustainability and Growth (AMC 2016)
AIP Conf. Proc. 1901, 010002 (2017)
https://doi.org/10.1063/1.5010598
NANOMATERIALS AND NANOTECHNOLOGY
Heat transfer of alumina-deionized water nanofluids in concentric tube heat exchanger
AIP Conf. Proc. 1901, 020001 (2017)
https://doi.org/10.1063/1.5010438
Electromagnetic wave absorption properties of rice husks carbonized at 2500 °C
AIP Conf. Proc. 1901, 020002 (2017)
https://doi.org/10.1063/1.5010439
The effects of ferrocene concentration on CNT growth on micron silica gel
AIP Conf. Proc. 1901, 020003 (2017)
https://doi.org/10.1063/1.5010440
Graphene modified FTO/TiO2 interface photoelectrode for improved performance of dye sensitized solar cells
Muhammad Umair Shahid; Norani Muti Mohamed; Mehboob Khatani; Ali Samer Muhsan; Adel Samsudin; Muhammad Imran Irshad; Siti Nur Azella Zaine
AIP Conf. Proc. 1901, 020004 (2017)
https://doi.org/10.1063/1.5010441
Fabrication of modified GIC: GIC-nanoSiO2-HA-ZrO2 using two different mixing methods
AIP Conf. Proc. 1901, 020007 (2017)
https://doi.org/10.1063/1.5010444
Antibacterial activity of copper coating electrodeposited on 304 stainless steel substrate
AIP Conf. Proc. 1901, 020009 (2017)
https://doi.org/10.1063/1.5010446
Photostability effect of silica nanoparticles encapsulated fluorescence dye
AIP Conf. Proc. 1901, 020010 (2017)
https://doi.org/10.1063/1.5010447
Effect of hydrothermal reaction time on size of bismuth oxide nanoparticles synthesized via hydrothermal method
AIP Conf. Proc. 1901, 020011 (2017)
https://doi.org/10.1063/1.5010448
Kyllinga brevifolia mediated greener silver nanoparticles
AIP Conf. Proc. 1901, 020012 (2017)
https://doi.org/10.1063/1.5010449
Doped indium nitride thin film by sol-gel spin coating method
AIP Conf. Proc. 1901, 020015 (2017)
https://doi.org/10.1063/1.5010452
X-ray peak profile analysis of zinc oxide nanoparticles formed by simple precipitation method
AIP Conf. Proc. 1901, 020016 (2017)
https://doi.org/10.1063/1.5010453
The effects of MWNT on thermal conductivity and thermal mechanical properties of epoxy
AIP Conf. Proc. 1901, 020017 (2017)
https://doi.org/10.1063/1.5010454
Synthesis and characterization of sulfur-functionalized silica nanocapsules as mercury adsorbents
AIP Conf. Proc. 1901, 020018 (2017)
https://doi.org/10.1063/1.5010455
Synthesis of galium nitride thin films using sol-gel dip coating method
AIP Conf. Proc. 1901, 020020 (2017)
https://doi.org/10.1063/1.5010457
Characterization of ZnO nanostructure synthesized through hydrothermal method
AIP Conf. Proc. 1901, 020022 (2017)
https://doi.org/10.1063/1.5010459
Kinetic formation of silver-copper nanoparticles and its characterization
AIP Conf. Proc. 1901, 020024 (2017)
https://doi.org/10.1063/1.5010461
Modification of PdO/CeZrO2 doped with transition metals (Y and Fe) for reducibility properties
AIP Conf. Proc. 1901, 020025 (2017)
https://doi.org/10.1063/1.5010462
Catalytic activity of calcium-based mixed metal oxides nanocatalysts in transesterification reaction of palm oil
AIP Conf. Proc. 1901, 020026 (2017)
https://doi.org/10.1063/1.5010463
Cobalt-doped carbon xerogel with different initial pH values toward oxygen reduction
AIP Conf. Proc. 1901, 020027 (2017)
https://doi.org/10.1063/1.5010464
Gadolinium-doped zinc oxide thin films prepared on different substrates by sol-gel spin-coating
AIP Conf. Proc. 1901, 020028 (2017)
https://doi.org/10.1063/1.5010465
ADVANCED COMPOSITE MATERIALS
The relationship between hardness to the tensile properties of kenaf/ unsaturated polyester composite
AIP Conf. Proc. 1901, 030001 (2017)
https://doi.org/10.1063/1.5010466
Hydrothermal synthesis of free-template zeolite T from kaolin
AIP Conf. Proc. 1901, 030004 (2017)
https://doi.org/10.1063/1.5010469
Thermal conductivity behavior of oil palm/jute fibre-reinforced hybrid composites
AIP Conf. Proc. 1901, 030007 (2017)
https://doi.org/10.1063/1.5010472
Biogas reforming over multi walled carbon nanotubes with Co-Mo/MgO nanoparticles
AIP Conf. Proc. 1901, 030008 (2017)
https://doi.org/10.1063/1.5010473
Mechanical properties of three layer glass fibre reinforced unsaturated polyester filled with P84 Polyimide
AIP Conf. Proc. 1901, 030009 (2017)
https://doi.org/10.1063/1.5010474
Flammability and thermal properties studies of nonwoven flax reinforced acrylic based polyester composites
AIP Conf. Proc. 1901, 030010 (2017)
https://doi.org/10.1063/1.5010475
Development of dense glass-ceramic from recycled soda-lime-silicate glass and fly ash for tiling
AIP Conf. Proc. 1901, 030011 (2017)
https://doi.org/10.1063/1.5010476
Determination of coefficient thermal expansion of glass microballoon/vinyl ester syntactic foams
AIP Conf. Proc. 1901, 030012 (2017)
https://doi.org/10.1063/1.5010477
Tensile properties of chrome tanned leather waste short fibre filled unsaturated polyester composite
AIP Conf. Proc. 1901, 030013 (2017)
https://doi.org/10.1063/1.5010478
Antibacterial properties of Ag-exchanged Philippine natural zeolite-chitosan composites
AIP Conf. Proc. 1901, 030015 (2017)
https://doi.org/10.1063/1.5010480
Dimensional stability of pineapple leaf fibre reinforced phenolic composites
AIP Conf. Proc. 1901, 030016 (2017)
https://doi.org/10.1063/1.5010481
Burst pressure investigation of filament wound type IV composite pressure vessel
AIP Conf. Proc. 1901, 030017 (2017)
https://doi.org/10.1063/1.5010482
Thermal stability and degradation kinetics of kenaf/sol-gel silica hybrid
AIP Conf. Proc. 1901, 030018 (2017)
https://doi.org/10.1063/1.5010483
Optimisation of mechanical properties of bamboo fibre reinforced-PLA biocomposites
AIP Conf. Proc. 1901, 030019 (2017)
https://doi.org/10.1063/1.5010484
Adaptability of activated carbon from palm oil kernel shell in the development of brake friction materials
AIP Conf. Proc. 1901, 030020 (2017)
https://doi.org/10.1063/1.5010485
Effect of Kevlar and carbon fibres on tensile properties of oil palm/epoxy composites
AIP Conf. Proc. 1901, 030021 (2017)
https://doi.org/10.1063/1.5010486
Development of magnetorheological elastomers based on Deproteinised natural rubber as smart damping materials
AIP Conf. Proc. 1901, 030022 (2017)
https://doi.org/10.1063/1.5010487
Effect of NaOH soaking time on kenaf/glass fiber hybrid epoxy composites
Haslan Fadli Ahmad Marzuki; Engku Ahmadhilmi Engku Ubaidillah; Ain Farhana Wahid; Nur Ashila Shabirah Jaffar; Nur Fatihah Mohd Saufi; Sharifah Shahnaz Syed Bakar
AIP Conf. Proc. 1901, 030023 (2017)
https://doi.org/10.1063/1.5010488
HARD METALS/CUTTING TOOL/MECHANICAL ALLOYING/POWDER PRODUCTION AND PREPARATION
Stent manufacturing using cobalt chromium molybdenum (CoCrMo) by selective laser melting technology
AIP Conf. Proc. 1901, 040001 (2017)
https://doi.org/10.1063/1.5010490
Precision hole punching on composite fiber reinforced polymer panels
AIP Conf. Proc. 1901, 040002 (2017)
https://doi.org/10.1063/1.5010491
Tool geometry and damage mechanisms influencing CNC turning efficiency of Ti6Al4V
AIP Conf. Proc. 1901, 040004 (2017)
https://doi.org/10.1063/1.5010493
A method to press powder at 6000 ton using small amount of explosive
AIP Conf. Proc. 1901, 040005 (2017)
https://doi.org/10.1063/1.5010494
Effect of fabrication process on physical and mechanical properties of tungsten carbide - cobalt composite: A review
Ahmad Aswad Mahaidin; Talib Ria Jaafar; Mohd Asri Selamat; Salina Budin; Zaim Syazwan Sulaiman; Mohamad Hasnan Abdul Hamid
AIP Conf. Proc. 1901, 040006 (2017)
https://doi.org/10.1063/1.5010495
The effect of impurities elements on titanium alloy (Ti-6Al-4V) MIM sintered part properties
AIP Conf. Proc. 1901, 040007 (2017)
https://doi.org/10.1063/1.5010496
FAILURE ANALYSIS/OPTICAL AND PHOTONIC MATERIALS
The effect of CFRP on retrofitting of damaged HSRC beams using AE technique
AIP Conf. Proc. 1901, 050002 (2017)
https://doi.org/10.1063/1.5010498
Finite element analysis on effects of rim and web thicknesses on root stress of thin-rimmed spur gear with asymmetric web arrangement
Ismail Ali Abdul Aziz; Daing Mohamad Nafiz Daing Idris; Mohd Hasnun Arif Hassan; Mohamad Firdaus Basrawi; Ahmad Fitri Yusop; Wafiuddin Md Ghazali
AIP Conf. Proc. 1901, 050003 (2017)
https://doi.org/10.1063/1.5010499
Effect of post weld impact treatment (PWIT) on mechanical properties of spot-welded joint
AIP Conf. Proc. 1901, 050004 (2017)
https://doi.org/10.1063/1.5010500
Finite element modelling of aluminum alloy 2024-T3 under transverse impact loading
AIP Conf. Proc. 1901, 050005 (2017)
https://doi.org/10.1063/1.5010501
An investigation of GaN thin films on AlN on sapphire substrate by sol-gel spin coating method
AIP Conf. Proc. 1901, 050006 (2017)
https://doi.org/10.1063/1.5010502
COMPUTATIONAL/MATERIALS SCIENCE/ELECTRICAL/MAGNETIC MATERIALS
Microstructure and intermetallic compound (IMC) formation of Sn-Cu-In solder added with Zn
AIP Conf. Proc. 1901, 060001 (2017)
https://doi.org/10.1063/1.5010504
Correlation between electronic structure and electron conductivity in MoX2 (X = S, Se, and Te)
AIP Conf. Proc. 1901, 060003 (2017)
https://doi.org/10.1063/1.5010506
Effect of Zn addition on bulk microstructure of lead-free solder SN100C
AIP Conf. Proc. 1901, 060005 (2017)
https://doi.org/10.1063/1.5010508
Optimum welding parameter for GMA welding using soft computing techniques
AIP Conf. Proc. 1901, 060006 (2017)
https://doi.org/10.1063/1.5010509
FILTER AND POROUS MATERIALS
Polyethersulfone-based ultrafiltration hollow fibre membrane for drinking water treatment systems
AIP Conf. Proc. 1901, 070001 (2017)
https://doi.org/10.1063/1.5010510
Mechanical properties of palm oil based bio-polyurethane foam of free rise and various densities
AIP Conf. Proc. 1901, 070002 (2017)
https://doi.org/10.1063/1.5010511
Investigation of the thermal behavior of Philippine natural zeolites
AIP Conf. Proc. 1901, 070005 (2017)
https://doi.org/10.1063/1.5010514
Morphology and phase identification of synthesized precipitated calcium carbonate from acetylene gas industry waste
AIP Conf. Proc. 1901, 070006 (2017)
https://doi.org/10.1063/1.5010515
NEW FUNCTIONAL MATERIALS
Extraction of benzene and cyclohexane using [BMIM][N(CN)2] and their equilibrium modeling
AIP Conf. Proc. 1901, 080001 (2017)
https://doi.org/10.1063/1.5010516
Hydrophobic surface functionalization of Philippine natural zeolite for a targeted oil remediation application
AIP Conf. Proc. 1901, 080003 (2017)
https://doi.org/10.1063/1.5010518
GRAPHENE/POLYMER AND RUBBER
Preliminary study of semi-refined carrageenan (SRC) as secondary gelling agent in natural rubber (NR) latex foam
AIP Conf. Proc. 1901, 090001 (2017)
https://doi.org/10.1063/1.5010519
The conductivity and stability of polymer composite solid electrolyte upon addition of graphene
AIP Conf. Proc. 1901, 090003 (2017)
https://doi.org/10.1063/1.5010521
BIOMATERIALS AND BIOTECHNOLOGY
Physical evaluations of Co-Cr-Mo parts processed using different additive manufacturing techniques
AIP Conf. Proc. 1901, 100001 (2017)
https://doi.org/10.1063/1.5010523
Chemically modified Moringa oleifera seed husks as low cost adsorbent for removal of copper from aqueous solution
AIP Conf. Proc. 1901, 100002 (2017)
https://doi.org/10.1063/1.5010524
Torrefaction of oil palm frond: Effects of torrefaction temperature and holding time
AIP Conf. Proc. 1901, 100003 (2017)
https://doi.org/10.1063/1.5010525
Effect of N, S Co-doped TiO2 concentration on photocatalytic degradation of phenol
AIP Conf. Proc. 1901, 100004 (2017)
https://doi.org/10.1063/1.5010526
Combustion properties, water absorption and grindability of raw/torrefied biomass pellets and Silantek coal
AIP Conf. Proc. 1901, 100005 (2017)
https://doi.org/10.1063/1.5010527
Fabrication and characterization of regenerated cellulose films obtained from oil palm empty fruit bunch
AIP Conf. Proc. 1901, 100007 (2017)
https://doi.org/10.1063/1.5010529
Release profile of synthesized coumarin derivatives as a novel antibacterial agent from glass ionomer cement (GIC)
AIP Conf. Proc. 1901, 100008 (2017)
https://doi.org/10.1063/1.5010530
Microwave synthesis and antibacterial studies of bioceramics doped with antibacterial metal
AIP Conf. Proc. 1901, 100009 (2017)
https://doi.org/10.1063/1.5010531
Physicochemical properties of marine collagen-alginate biomaterial
AIP Conf. Proc. 1901, 100011 (2017)
https://doi.org/10.1063/1.5010533
Investigation of microstructure and mechanical properties of PLLA/HA system
AIP Conf. Proc. 1901, 100013 (2017)
https://doi.org/10.1063/1.5010535
Analysis of crack propagation in human long bone by using finite element modeling
AIP Conf. Proc. 1901, 100014 (2017)
https://doi.org/10.1063/1.5010536
Physical properties and microstructure study of stainless steel 316L alloy fabricated by selective laser melting
Nurul Kamariah Md Saiful Islam; Wan Sharuzi Wan Harun; Saiful Anwar Che Ghani; Mohd Asnawi Omar; Mohd Hazlen Ramli; Muhammad Hussain Ismail
AIP Conf. Proc. 1901, 100015 (2017)
https://doi.org/10.1063/1.5010537
Stent manufacturing using cobalt chromium molybdenum (CoCrMo) by selective laser melting technology
AIP Conf. Proc. 1901, 100017 (2017)
https://doi.org/10.1063/1.5010539
AUTOMOTIVE APPLICATIONS/MACHINING/ADVANCED CHARACTERIZATION
Thermogravimetry analysis on fused borosilicate syntactic foams
AIP Conf. Proc. 1901, 110001 (2017)
https://doi.org/10.1063/1.5010542
Effect of composite layers on partially wrapped Al-glass/epoxy hybrid tube subjected to axial load
AIP Conf. Proc. 1901, 110002 (2017)
https://doi.org/10.1063/1.5010543
Single fibre strength of cellulosic fibre extracted from “Belatlan roots” plant
AIP Conf. Proc. 1901, 110003 (2017)
https://doi.org/10.1063/1.5010544
Identification of sandstone core damage using scanning electron microscopy
AIP Conf. Proc. 1901, 110005 (2017)
https://doi.org/10.1063/1.5010546
Processing parameters optimisation of nonwoven kenaf reinforced acrylic based polyester composites
AIP Conf. Proc. 1901, 110007 (2017)
https://doi.org/10.1063/1.5010548
Waste cockle shell as natural catalyst for biodiesel production from jatropha oil
AIP Conf. Proc. 1901, 110008 (2017)
https://doi.org/10.1063/1.5010549
COATING AND SURFACE ENGINEERING
Surface morphological properties of Ag-Al2O3 nanocermet layers using dip-coating technique
AIP Conf. Proc. 1901, 120001 (2017)
https://doi.org/10.1063/1.5010551
Effect of surface oxidation on thermomechanical behavior of NiTi shape memory alloy wire
AIP Conf. Proc. 1901, 120002 (2017)
https://doi.org/10.1063/1.5010552
Mitigation of corrosion attack on carbon steel coated cermet alloy in different anion contents
AIP Conf. Proc. 1901, 120003 (2017)
https://doi.org/10.1063/1.5010553
Effect of hydroxyl group position at imine structure on corrosion inhibition of mild steel in 0.5 m NaCl
AIP Conf. Proc. 1901, 120004 (2017)
https://doi.org/10.1063/1.5010554
Wear and corrosion behaviour of tungsten carbide based coatings with different metallic binder
AIP Conf. Proc. 1901, 120005 (2017)
https://doi.org/10.1063/1.5010555
Surface pre-treatment of aluminium by cleaning, chemical ething and conversion coating
AIP Conf. Proc. 1901, 120006 (2017)
https://doi.org/10.1063/1.5010556
Effect of deposition time on the synthesis of Al nanostructured coating by electron beam thermal evaporator
Zahidah Othman; Saifollah Abdullah; Shadatul Hanom Rashid; Mohd Husairi Fadzilah Suhaimi; Mohamad Kamal Harun; Mohamad Rusop Mahmood
AIP Conf. Proc. 1901, 120010 (2017)
https://doi.org/10.1063/1.5010560
TESTING AND EVALUATION
Asphalt dust waste material as a paste volume in developing sustainable self compacting concrete (SCC)
AIP Conf. Proc. 1901, 130002 (2017)
https://doi.org/10.1063/1.5010562
The effect of fiber treatment on abrasive wear properties of palm fiber reinforced epoxy composite
AIP Conf. Proc. 1901, 130003 (2017)
https://doi.org/10.1063/1.5010563
Effect of thermally growth oxides (TGO) on adhesion strength for high purity yitria stabilised zirconia (YSZ) and rare – Earth lanthanum zirconates (LZ) multilayer thermal barrier coating before and after isothermal heat treatment
AIP Conf. Proc. 1901, 130004 (2017)
https://doi.org/10.1063/1.5010564
Microstructure evolution and texture development of hot form-quench (HFQ) AZ31 twin roll cast (TRC) magnesium alloy
AIP Conf. Proc. 1901, 130005 (2017)
https://doi.org/10.1063/1.5010565
Exploiting epoxidized natural rubber latex (ENRL) as a starting raw material for latex-based products
AIP Conf. Proc. 1901, 130006 (2017)
https://doi.org/10.1063/1.5010566
Development of low thermal conductivity brick using rice husk, corn cob and waste tea in clay brick manufacturing
AIP Conf. Proc. 1901, 130007 (2017)
https://doi.org/10.1063/1.5010567
Damage characterization of E-glass and C-glass fibre polymer composites after high velocity impact
AIP Conf. Proc. 1901, 130008 (2017)
https://doi.org/10.1063/1.5010568
A comparison of damage profiling of automated tap testers on aircraft CFRP panel
AIP Conf. Proc. 1901, 130009 (2017)
https://doi.org/10.1063/1.5010569
The study of photochromic performance and photofatigue behavior of spirooxazine
AIP Conf. Proc. 1901, 130014 (2017)
https://doi.org/10.1063/1.5010574
The relationship between absorbency and density of bioplastic film made from hydrolyzed starch
AIP Conf. Proc. 1901, 130015 (2017)
https://doi.org/10.1063/1.5010575
Development of environmental friendly lost circulation material from banana peel
AIP Conf. Proc. 1901, 130016 (2017)
https://doi.org/10.1063/1.5010576
Development and characterization of polyethersulfone/TiO2 mixed matrix membranes for CO2/CH4 separation
AIP Conf. Proc. 1901, 130017 (2017)
https://doi.org/10.1063/1.5010577
Performance of asphaltic concrete incorporating styrene butadiene rubber subjected to varying aging condition
Faisal Mohammed Salah; Ramadhansyah Putra Jaya; Azman Mohamed; Norhidayah Abdul Hassan; Nurul Najihah Mad Rosni; Abdullahi Ali Mohamed; Agussabti
AIP Conf. Proc. 1901, 130019 (2017)
https://doi.org/10.1063/1.5010579
The effect of filler on the protein content and interferences in rubber latices
AIP Conf. Proc. 1901, 130021 (2017)
https://doi.org/10.1063/1.5010581
Physical and mechanical properties of injection moulded 316L stainless steel using waste rubber binder
Rosniza Rabilah; Nor ‘Aini Wahab; Mohd Afian Omar; Talib Ria Jaafar; Salina Budin; Siti Mardini Hashim; Rosliza Sauti; Mustaqim Abdul Razak
AIP Conf. Proc. 1901, 130022 (2017)
https://doi.org/10.1063/1.5010582
The effect of oleic acid as post spinning treatment on tensile strength of polyacrylonitrile fibers
AIP Conf. Proc. 1901, 130024 (2017)
https://doi.org/10.1063/1.5010584
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.