Skip Nav Destination
Issues
16 October 2017
In this Issue
PRELIMINARY
FORMABILITY OF METALLIC MATERIALS
Texture-based formability prediction for Mg wrought alloys ZE10 and AZ31
AIP Conf. Proc. 1896, 020001 (2017)
https://doi.org/10.1063/1.5007958
Limits in multi-point forming based on a small scaled flexible 9-point die device
AIP Conf. Proc. 1896, 020003 (2017)
https://doi.org/10.1063/1.5007960
Formability and macroscopic shearing of a titanium alloy Ti-6Al-4V under channel die compression
AIP Conf. Proc. 1896, 020005 (2017)
https://doi.org/10.1063/1.5007962
Study of high strain rate effect on sheet formability based on Nakazima test
AIP Conf. Proc. 1896, 020007 (2017)
https://doi.org/10.1063/1.5007964
Characterising ductility of 6xxx-series aluminium sheet alloys at combined loading conditions
AIP Conf. Proc. 1896, 020008 (2017)
https://doi.org/10.1063/1.5007965
Investigation on flange deformation behavior of duplex embossed sheet metal subjected to deep drawing
AIP Conf. Proc. 1896, 020011 (2017)
https://doi.org/10.1063/1.5007968
Development of draw-bending testing method using digital image correlation system
AIP Conf. Proc. 1896, 020012 (2017)
https://doi.org/10.1063/1.5007969
Deducing material quality in cast and hot-forged steels by new bending test
AIP Conf. Proc. 1896, 020013 (2017)
https://doi.org/10.1063/1.5007970
Mechanical behavior and modelisation of Ti-6Al-4V titanium sheet under hot stamping conditions
AIP Conf. Proc. 1896, 020016 (2017)
https://doi.org/10.1063/1.5007973
Hole expansion test of third generation steels
AIP Conf. Proc. 1896, 020017 (2017)
https://doi.org/10.1063/1.5007974
Hot tensile behaviour in silicon-killed boron microalloyed steels
AIP Conf. Proc. 1896, 020019 (2017)
https://doi.org/10.1063/1.5007976
Forming characteristics of artificial aging Al-Mg-Si-Cu sheet alloys
AIP Conf. Proc. 1896, 020020 (2017)
https://doi.org/10.1063/1.5007977
The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel
AIP Conf. Proc. 1896, 020021 (2017)
https://doi.org/10.1063/1.5007978
Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods
AIP Conf. Proc. 1896, 020022 (2017)
https://doi.org/10.1063/1.5007979
Effect of anisotropic yield function evolution on formability of sheet metal
AIP Conf. Proc. 1896, 020023 (2017)
https://doi.org/10.1063/1.5007980
Fracture prediction of hole expansion forming using forming limit stress criterion
AIP Conf. Proc. 1896, 020024 (2017)
https://doi.org/10.1063/1.5007981
Linear transformation based orthotropic shear ductile fracture criterion for lightweight metals
AIP Conf. Proc. 1896, 020025 (2017)
https://doi.org/10.1063/1.5007982
Formability of dual-phase steels in deep drawing of rectangular parts: Influence of blank thickness and die radius
AIP Conf. Proc. 1896, 020026 (2017)
https://doi.org/10.1063/1.5007983
Forming limit strains for non-linear strain path of AA6014 aluminium sheet deformed at room temperature
AIP Conf. Proc. 1896, 020027 (2017)
https://doi.org/10.1063/1.5007984
Manufacture of a four-sheet complex component from different titanium alloys by superplastic forming
AIP Conf. Proc. 1896, 020028 (2017)
https://doi.org/10.1063/1.5007985
Crystal plasticity assisted prediction on the yield locus evolution and forming limit curves
AIP Conf. Proc. 1896, 020030 (2017)
https://doi.org/10.1063/1.5007987
COMPOSITES FORMING PROCESSES
Draping simulation with a new finite element formulation involving an internal unit cell
AIP Conf. Proc. 1896, 030001 (2017)
https://doi.org/10.1063/1.5007988
Simulating squeeze flows in multiaxial laminates using an improved TIF model
AIP Conf. Proc. 1896, 030004 (2017)
https://doi.org/10.1063/1.5007991
From dilute to entangled fiber suspensions involved in reinforced polymers and composites
AIP Conf. Proc. 1896, 030006 (2017)
https://doi.org/10.1063/1.5007993
Influence of the temperature on the composites’ fusion bonding quality
AIP Conf. Proc. 1896, 030007 (2017)
https://doi.org/10.1063/1.5007994
Modelling and simulating the forming of new dry automated lay-up reinforcements for primary structures
AIP Conf. Proc. 1896, 030008 (2017)
https://doi.org/10.1063/1.5007995
Compaction behavior of out-of-autoclave prepreg materials
AIP Conf. Proc. 1896, 030009 (2017)
https://doi.org/10.1063/1.5007996
Thermoforming of glass fibre reinforced polypropylene: A study on the influence of different process parameters
AIP Conf. Proc. 1896, 030010 (2017)
https://doi.org/10.1063/1.5007997
Numerical approach for modelling across scales infusion-based processing of aircraft primary structures
AIP Conf. Proc. 1896, 030011 (2017)
https://doi.org/10.1063/1.5007998
Simulations of 3D textile composite reinforcements. Specificities of the mechanical behavior
AIP Conf. Proc. 1896, 030012 (2017)
https://doi.org/10.1063/1.5007999
Quantification of micro-CT images of textile reinforcements
AIP Conf. Proc. 1896, 030013 (2017)
https://doi.org/10.1063/1.5008000
Out-of-autoclave manufacturing of a stiffened thermoplastic carbon fibre PEEK panel
M. Flanagan; J. Goggins; A. Doyle; B. Weafer; M. Ward; M. Bizeul; R. Canavan; C. O’Bradaigh; K. Doyle; N. Harrison
AIP Conf. Proc. 1896, 030014 (2017)
https://doi.org/10.1063/1.5008001
A mesoscopic approach for draping simulation of preforms manufactured by direct fibre placement
AIP Conf. Proc. 1896, 030016 (2017)
https://doi.org/10.1063/1.5008003
Simulation of microwave heating of a composite part in an oven cavity
AIP Conf. Proc. 1896, 030018 (2017)
https://doi.org/10.1063/1.5008005
Impregnation quality of shredded semipreg after compression moulding
AIP Conf. Proc. 1896, 030019 (2017)
https://doi.org/10.1063/1.5008006
Strategy for improving the quality of multi-layered interlock dry fabric preforms
AIP Conf. Proc. 1896, 030020 (2017)
https://doi.org/10.1063/1.5008007
A combinaison of UV curing technology with ATL process
AIP Conf. Proc. 1896, 030021 (2017)
https://doi.org/10.1063/1.5008008
Mechanical analysis of CFRP-steel hybrid composites considering the interfacial adhesion
AIP Conf. Proc. 1896, 030022 (2017)
https://doi.org/10.1063/1.5008009
Manufacturing issues which affect coating erosion performance in wind turbine blades
AIP Conf. Proc. 1896, 030023 (2017)
https://doi.org/10.1063/1.5008010
Continuous welding of unidirectional fiber reinforced thermoplastic tape material
AIP Conf. Proc. 1896, 030025 (2017)
https://doi.org/10.1063/1.5008012
Meso F.E. simulation of composite reinforcement deformation based on X-ray computed tomography
AIP Conf. Proc. 1896, 030027 (2017)
https://doi.org/10.1063/1.5008014
Friction of carbon fibre and influence of sizing treatment
AIP Conf. Proc. 1896, 030030 (2017)
https://doi.org/10.1063/1.5008017
Hot forming of composite prepreg: Numerical analyses
Eduardo Guzman-Maldonado; Nahiène Hamila; Philippe Boisse; Khalid El Azzouzi; Xavier Tardif; Tanguy Moro; Sylvain Chatel; Paulin Fideu
AIP Conf. Proc. 1896, 030031 (2017)
https://doi.org/10.1063/1.5008018
Modelling and simulation of the consolidation behavior during thermoplastic prepreg composites forming process
AIP Conf. Proc. 1896, 030032 (2017)
https://doi.org/10.1063/1.5008019
Finite element simulation of thickness changes in laminate during thermoforming
AIP Conf. Proc. 1896, 030033 (2017)
https://doi.org/10.1063/1.5008020
Influence of prepreg characteristics on stamp consolidation
AIP Conf. Proc. 1896, 030034 (2017)
https://doi.org/10.1063/1.5008021
Towards a coupled heating-forming simulation of the thermoforming of thermoplastic composites
AIP Conf. Proc. 1896, 030035 (2017)
https://doi.org/10.1063/1.5008022
Failure process investigation of overwrapping composite on the pipe by burst test
AIP Conf. Proc. 1896, 030039 (2017)
https://doi.org/10.1063/1.5008026
ADDITIVE MANUFACTURING
Additive-manufactured sandwich lattice structures: A numerical and experimental investigation
AIP Conf. Proc. 1896, 040001 (2017)
https://doi.org/10.1063/1.5008027
Rheological characterization of plasticized corn proteins for fused deposition modeling
AIP Conf. Proc. 1896, 040002 (2017)
https://doi.org/10.1063/1.5008028
Improving the strength of additively manufactured objects via modified interior structure
AIP Conf. Proc. 1896, 040003 (2017)
https://doi.org/10.1063/1.5008029
Reducing tool wear by partial cladding of critical zones in hot form tool by laser metal deposition
AIP Conf. Proc. 1896, 040004 (2017)
https://doi.org/10.1063/1.5008030
Computationally efficient thermal-mechanical modelling of selective laser melting
AIP Conf. Proc. 1896, 040005 (2017)
https://doi.org/10.1063/1.5008031
Point, surface and volumetric heat sources in the thermal modelling of selective laser melting
AIP Conf. Proc. 1896, 040006 (2017)
https://doi.org/10.1063/1.5008032
On the microstructure analysis of FSW joints of aluminium components made via direct metal laser sintering
Fabio Scherillo; Antonello Astarita; Daniela di Martino; Vincenzo Contaldi; Luca di Matteo; Paolo di Petta; Renzo Casarin; Antonino Squillace; Antonio Langella
AIP Conf. Proc. 1896, 040007 (2017)
https://doi.org/10.1063/1.5008033
Lattice structures integration with conventional topology optimization
AIP Conf. Proc. 1896, 040009 (2017)
https://doi.org/10.1063/1.5008035
Influence on surface characteristics of electron beam melting process (EBM) by varying the process parameters
Adrien Dolimont; Sebastien Michotte; Edouard Rivière-Lorphèvre; François Ducobu; Solange Vivès; Stéphane Godet; Tom Henkes; Enrico Filippi
AIP Conf. Proc. 1896, 040010 (2017)
https://doi.org/10.1063/1.5008036
Development and fabrication of patient-specific knee implant using additive manufacturing techniques
AIP Conf. Proc. 1896, 040011 (2017)
https://doi.org/10.1063/1.5008037
Robot-based additive manufacturing for flexible die-modelling in incremental sheet forming
AIP Conf. Proc. 1896, 040012 (2017)
https://doi.org/10.1063/1.5008038
Numerical simulation of complex part manufactured by selective laser melting process
AIP Conf. Proc. 1896, 040013 (2017)
https://doi.org/10.1063/1.5008039
3D printing of polypropylene using the fused filament fabrication technique
AIP Conf. Proc. 1896, 040014 (2017)
https://doi.org/10.1063/1.5008040
Finite element analysis (FEA) of dental implant fixture for mechanical stability and rapid osseointegration
AIP Conf. Proc. 1896, 040016 (2017)
https://doi.org/10.1063/1.5008042
Roles of microstructures on deformation response of 316 stainless steel made by 3D printing
AIP Conf. Proc. 1896, 040017 (2017)
https://doi.org/10.1063/1.5008043
Residual stress prediction in a powder bed fusion manufactured Ti6Al4V hip stem
AIP Conf. Proc. 1896, 040018 (2017)
https://doi.org/10.1063/1.5008044
NON-CONVENTIONAL PROCESSES
Comparison between rotary and conventional flaring processes
AIP Conf. Proc. 1896, 050002 (2017)
https://doi.org/10.1063/1.5008047
Modification of the process dynamics in micro-EDM by means of an additional piezo-control system
AIP Conf. Proc. 1896, 050003 (2017)
https://doi.org/10.1063/1.5008048
The FEM simulation of continuous rotary extrusion (CRE) of aluminum alloy AA3003
AIP Conf. Proc. 1896, 050004 (2017)
https://doi.org/10.1063/1.5008049
Deformation characteristics of thermoplastics in single point incremental forming
AIP Conf. Proc. 1896, 050005 (2017)
https://doi.org/10.1063/1.5008050
Evaluation of effects of geometrical parameters on density distribution in compaction of PM gears
AIP Conf. Proc. 1896, 050006 (2017)
https://doi.org/10.1063/1.5008051
Securing a robust electrical discharge drilling process by means of flow rate control
AIP Conf. Proc. 1896, 050007 (2017)
https://doi.org/10.1063/1.5008052
Influence of friction stir welding parameters on titanium-aluminum heterogeneous lap joining configuration
AIP Conf. Proc. 1896, 050008 (2017)
https://doi.org/10.1063/1.5008053
Surface roughness at vibroburnishing
AIP Conf. Proc. 1896, 050011 (2017)
https://doi.org/10.1063/1.5008056
Deposition and micro electrical discharge machining of CVD-diamond layers incorporated with silicon
AIP Conf. Proc. 1896, 050012 (2017)
https://doi.org/10.1063/1.5008057
Fabrication and mechanical characterization of hybrid metal foam/bio-composite samples
AIP Conf. Proc. 1896, 050013 (2017)
https://doi.org/10.1063/1.5008058
Modeling and simulation of the fluid flow in wire electrochemical machining with rotating tool (wire ECM)
AIP Conf. Proc. 1896, 050014 (2017)
https://doi.org/10.1063/1.5008059
Lightweight bio-composites based on hemp fibres produced by conventional and unconventional processes
AIP Conf. Proc. 1896, 050015 (2017)
https://doi.org/10.1063/1.5008060
Modelling and optimisation of electromagnetically coupled solid manufacturing processes
AIP Conf. Proc. 1896, 050016 (2017)
https://doi.org/10.1063/1.5008061
Fabrication of micro T-shaped tubular components by hydroforming process
AIP Conf. Proc. 1896, 050017 (2017)
https://doi.org/10.1063/1.5008062
STRUCTURES, PROPERTIES, AND PROCESSING OF POLYMERS AND BIOMASS BASED MATERIALS
Self heating during stretch blow molding: An experimental numerical comparison
AIP Conf. Proc. 1896, 060003 (2017)
https://doi.org/10.1063/1.5008066
Hybrid RTM process: Monitoring and processing of composites based on reactive thermoplastic systems
AIP Conf. Proc. 1896, 060005 (2017)
https://doi.org/10.1063/1.5008068
A non-invasive experimental approach for surface temperature measurements on semi-crystalline thermoplastics
AIP Conf. Proc. 1896, 060007 (2017)
https://doi.org/10.1063/1.5008070
Assessing the stretch-blow moulding FE simulation of PET over a large process window
AIP Conf. Proc. 1896, 060008 (2017)
https://doi.org/10.1063/1.5008071
Crystallization of isotactic polypropylene in different shear regimes
AIP Conf. Proc. 1896, 060010 (2017)
https://doi.org/10.1063/1.5008073
The influence of cosmic radiation on the properties of different polymers
AIP Conf. Proc. 1896, 060011 (2017)
https://doi.org/10.1063/1.5008074
Processing - property relations from biaxial deformation of PET (polyethylene terephthalate)
AIP Conf. Proc. 1896, 060012 (2017)
https://doi.org/10.1063/1.5008075
INTEGRATED DESIGN, MODELING, AND RELIABILITY ASSESSMENT IN FORMING (I-DMR)
Finite element modeling of the residual stress evolution in forged and direct-aged alloy 718 turbine disks during manufacturing and its experimental validation
Andreas Drexler; Werner Ecker; Roland Hessert; Bernd Oberwinkler; Hans-Peter Gänser; Jozef Keckes; Michael Hofmann; Andreas Fischersworring-Bunk
AIP Conf. Proc. 1896, 070001 (2017)
https://doi.org/10.1063/1.5008076
Estimating product-to-product variations in metal forming using force measurements
AIP Conf. Proc. 1896, 070002 (2017)
https://doi.org/10.1063/1.5008077
Modelling and simulation of cure in pultrusion processes
AIP Conf. Proc. 1896, 070003 (2017)
https://doi.org/10.1063/1.5008078
Testing single point incremental forming moulds for rotomoulding operations
AIP Conf. Proc. 1896, 070004 (2017)
https://doi.org/10.1063/1.5008079
Shape optimization of shear fracture specimen considering plastic anisotropy
AIP Conf. Proc. 1896, 070005 (2017)
https://doi.org/10.1063/1.5008080
INCREMENTAL AND SHEET METAL FORMING
Springback compensation for a vehicle’s steel body panel
AIP Conf. Proc. 1896, 080001 (2017)
https://doi.org/10.1063/1.5008081
Cylindrical extrusions on A5083 aluminum alloy plate fabricated by friction stir forming
AIP Conf. Proc. 1896, 080002 (2017)
https://doi.org/10.1063/1.5008082
Numerical and experimental microscale analysis of the incremental forming process
AIP Conf. Proc. 1896, 080006 (2017)
https://doi.org/10.1063/1.5008086
Control of anisotropic shape deviation in single point incremental forming of paperboard
AIP Conf. Proc. 1896, 080007 (2017)
https://doi.org/10.1063/1.5008087
Finite element modelling of chain-die forming for ultra-high strength steel
AIP Conf. Proc. 1896, 080008 (2017)
https://doi.org/10.1063/1.5008088
Development of a numerical methodology for flowforming process simulation of complex geometry tubes
AIP Conf. Proc. 1896, 080011 (2017)
https://doi.org/10.1063/1.5008091
Finite element assisted prediction of ductile fracture in sheet bulging
AIP Conf. Proc. 1896, 080012 (2017)
https://doi.org/10.1063/1.5008092
Plastic deformation history in infeed rotary swaging process
AIP Conf. Proc. 1896, 080013 (2017)
https://doi.org/10.1063/1.5008093
Stiffness management of sheet metal parts using laser metal deposition
AIP Conf. Proc. 1896, 080014 (2017)
https://doi.org/10.1063/1.5008094
Effects of die quench forming on sheet thinning and 3-point bend testing of AA7075-T6
AIP Conf. Proc. 1896, 080015 (2017)
https://doi.org/10.1063/1.5008095
Springback of aluminum alloy brazing sheet in warm forming
AIP Conf. Proc. 1896, 080016 (2017)
https://doi.org/10.1063/1.5008096
Finite element simulation of non-isothermal warm forming of high-strength aluminum alloy sheet
AIP Conf. Proc. 1896, 080017 (2017)
https://doi.org/10.1063/1.5008097
Influence of heat treatment on mechanical property of steel hollow sphere and its sheet construction
AIP Conf. Proc. 1896, 080019 (2017)
https://doi.org/10.1063/1.5008099
A compensation strategy for geometric inaccuracies of hot incrementally formed parts
AIP Conf. Proc. 1896, 080020 (2017)
https://doi.org/10.1063/1.5008100
A study on thick plate forming for hollow-partitioned steam turbine nozzle
AIP Conf. Proc. 1896, 080021 (2017)
https://doi.org/10.1063/1.5008101
A novel methodology for in-process monitoring of flow forming
AIP Conf. Proc. 1896, 080022 (2017)
https://doi.org/10.1063/1.5008102
Architectural setup for online monitoring and control of process parameters in robot-based ISF
AIP Conf. Proc. 1896, 080023 (2017)
https://doi.org/10.1063/1.5008103
Validation of the FEA of a deep drawing process with additional force transmission
AIP Conf. Proc. 1896, 080024 (2017)
https://doi.org/10.1063/1.5008104
An investigation of friction effect on formability of AA 6061-T4 sheet during cold forming condition
AIP Conf. Proc. 1896, 080025 (2017)
https://doi.org/10.1063/1.5008105
Performance analysis of the incremental sheet forming on PMMA using a combined chemical and mechanical approach
AIP Conf. Proc. 1896, 080026 (2017)
https://doi.org/10.1063/1.5008106
Influence of inductive heating on microstructure and material properties in roll forming processes
AIP Conf. Proc. 1896, 080027 (2017)
https://doi.org/10.1063/1.5008107
MACHINING AND CUTTING
New tool holder design for cryogenic machining of Ti6Al4V
AIP Conf. Proc. 1896, 090001 (2017)
https://doi.org/10.1063/1.5008108
Numerical simulation of machining distortions on a forged component obtained by ring rolling process
AIP Conf. Proc. 1896, 090002 (2017)
https://doi.org/10.1063/1.5008109
Impact of high-pressure coolant supply on chip formation in milling
AIP Conf. Proc. 1896, 090003 (2017)
https://doi.org/10.1063/1.5008110
Microstructural and hardness changes in aluminum alloy Al-7075: Correlating machining and equal channel angular pressing
Stano Imbrogno; Eric Segebade; Andreas Fellmeth; Michael Gerstenmeyer; Frederik Zanger; Volker Schulze; Domenico Umbrello
AIP Conf. Proc. 1896, 090005 (2017)
https://doi.org/10.1063/1.5008112
Microstructural investigations of the trimmed edge of DP980 steel sheets
AIP Conf. Proc. 1896, 090006 (2017)
https://doi.org/10.1063/1.5008113
Reducing the uncertainty in robotic machining by modal analysis
AIP Conf. Proc. 1896, 090007 (2017)
https://doi.org/10.1063/1.5008114
Experimental analysis of influence of cutting conditions on machinability of waspaloy
AIP Conf. Proc. 1896, 090008 (2017)
https://doi.org/10.1063/1.5008115
Tool geometry optimization for drilling CFRP/Al-Li stacks with a lightning strike protection
AIP Conf. Proc. 1896, 090009 (2017)
https://doi.org/10.1063/1.5008116
Influence of the ferritic-pearlitic steel microstructure on surface roughness in broaching of automotive steels
AIP Conf. Proc. 1896, 090011 (2017)
https://doi.org/10.1063/1.5008118
OPTIMIZATION AND INVERSE ANALYSIS IN FORMING
Predicting shrinkage and warpage in injection molding: Towards automatized mold design
AIP Conf. Proc. 1896, 100001 (2017)
https://doi.org/10.1063/1.5008119
How inverse solver technologies can support die face development and process planning in the automotive industry
AIP Conf. Proc. 1896, 100002 (2017)
https://doi.org/10.1063/1.5008120
Fusion metamodeling of the bend deduction in air bending
AIP Conf. Proc. 1896, 100003 (2017)
https://doi.org/10.1063/1.5008121
Efficient calculation of uncertainty propagation with an application in robust optimization of forming processes
AIP Conf. Proc. 1896, 100004 (2017)
https://doi.org/10.1063/1.5008122