Skip Nav Destination
Issues
PRELIMINARY
KEYNOTE PAPER
From analog timers to the era of machine learning: The case of the transient hot-wire technique
AIP Conf. Proc. 1866, 020001 (2017)
https://doi.org/10.1063/1.4994476
INVITED PAPERS
Classification of buildings mold threat using electronic nose
AIP Conf. Proc. 1866, 030002 (2017)
https://doi.org/10.1063/1.4994478
Thermal properties of graphite oxide, thermally reduced graphene and chemically reduced graphene
AIP Conf. Proc. 1866, 030004 (2017)
https://doi.org/10.1063/1.4994480
REGULAR PAPERS - THERMOPHYSICS 2017
Influence of compression pressure on Young’s modulus of ceramic samples
AIP Conf. Proc. 1866, 040001 (2017)
https://doi.org/10.1063/1.4994481
Application of infrared thermography in complex moisture inspection of the Schebek Palace
AIP Conf. Proc. 1866, 040002 (2017)
https://doi.org/10.1063/1.4994482
Phonons and vibrations and their influence on the optical processes in non-crystalline semiconductors
AIP Conf. Proc. 1866, 040003 (2017)
https://doi.org/10.1063/1.4994483
Evaluation of the contact angle and frost resistance of hydrophobised heat-insulating mortars with polystyrene
AIP Conf. Proc. 1866, 040004 (2017)
https://doi.org/10.1063/1.4994484
The influence of water and salt content on the thermal conductivity coefficient of red clay brick
AIP Conf. Proc. 1866, 040005 (2017)
https://doi.org/10.1063/1.4994485
Is the perception of clean, humid air indeed affected by cooling the respiratory tract?
AIP Conf. Proc. 1866, 040007 (2017)
https://doi.org/10.1063/1.4994487
Influence of milling on physical properties of illite
Štefan Csáki; Viera Trnovcová; Ján Ondruška; Igor Štubňa; Patrik Dobroň; Tereza Václavů; Martina Záleská; Peter Bačík
AIP Conf. Proc. 1866, 040009 (2017)
https://doi.org/10.1063/1.4994489
Hot tube method for the measuring of thermophysical properties of materials
AIP Conf. Proc. 1866, 040010 (2017)
https://doi.org/10.1063/1.4994490
Verification of Joule heat evolution model for silicate building materials with electrically conductive admixtures
AIP Conf. Proc. 1866, 040011 (2017)
https://doi.org/10.1063/1.4994491
Thermal properties of alkali-activated aluminosilicates
AIP Conf. Proc. 1866, 040012 (2017)
https://doi.org/10.1063/1.4994492
Comparison of interpretation methods of thermocouple psychrometer readouts
AIP Conf. Proc. 1866, 040013 (2017)
https://doi.org/10.1063/1.4994493
Physical and thermal behavior of cement composites reinforced with recycled waste paper fibers
AIP Conf. Proc. 1866, 040014 (2017)
https://doi.org/10.1063/1.4994494
Influence of aggregate type and chemical admixtures on frost resistance of lightweight mortars
AIP Conf. Proc. 1866, 040017 (2017)
https://doi.org/10.1063/1.4994497
Experimental monitoring of electrical properties of porous building materials exposed to low temperatures
AIP Conf. Proc. 1866, 040018 (2017)
https://doi.org/10.1063/1.4994498
Improvement of properties of aluminosilicate pastes based on optimization of curing parameters
AIP Conf. Proc. 1866, 040019 (2017)
https://doi.org/10.1063/1.4994499
Investigation of thermo-physical properties of thermal insulation coating
AIP Conf. Proc. 1866, 040020 (2017)
https://doi.org/10.1063/1.4994500
Effect of particular material parameters on wetting process of capillary-porous material
AIP Conf. Proc. 1866, 040021 (2017)
https://doi.org/10.1063/1.4994501
Behavior of gypsum-based mortars with silica fume at high temperatures
AIP Conf. Proc. 1866, 040022 (2017)
https://doi.org/10.1063/1.4994502
Influence of weather-affected material characteristics on appearance of freeze/thaw cycles in building envelopes
AIP Conf. Proc. 1866, 040023 (2017)
https://doi.org/10.1063/1.4994503
Theoretical predictions for latent heats and phase-change temperatures of polycrystalline PCMs
AIP Conf. Proc. 1866, 040026 (2017)
https://doi.org/10.1063/1.4994506
Design reference year for development of photovoltaic envelope systems
AIP Conf. Proc. 1866, 040027 (2017)
https://doi.org/10.1063/1.4994507
Non-isothermal kinetic analysis of processes occurring during thermal treatment of kaolinite
AIP Conf. Proc. 1866, 040028 (2017)
https://doi.org/10.1063/1.4994508
Chapel of cemetery church of all saints in Sedlec – Long-term analysis of hygrothermal conditions
AIP Conf. Proc. 1866, 040029 (2017)
https://doi.org/10.1063/1.4994509
Thermophysical properties of hydrophobised lime plasters – The influence of ageing
AIP Conf. Proc. 1866, 040030 (2017)
https://doi.org/10.1063/1.4994510
Properties of cement based composites modified using diatomaceous earth
AIP Conf. Proc. 1866, 040031 (2017)
https://doi.org/10.1063/1.4994511
Computational fluid dynamics simulation of an earth-air heat exchanger for ventilation system
AIP Conf. Proc. 1866, 040032 (2017)
https://doi.org/10.1063/1.4994512
Simultaneous thermal analysis and thermodilatometry of hybrid fiber reinforced UHPC
AIP Conf. Proc. 1866, 040033 (2017)
https://doi.org/10.1063/1.4994513
Hydration of calcium aluminate cement determined by thermal analysis
AIP Conf. Proc. 1866, 040034 (2017)
https://doi.org/10.1063/1.4994514
Sustainable hemp-based composites for the building industry application
AIP Conf. Proc. 1866, 040036 (2017)
https://doi.org/10.1063/1.4994516
Thermophysical properties of cement based composites and their changes after artificial ageing
AIP Conf. Proc. 1866, 040037 (2017)
https://doi.org/10.1063/1.4994517
Estimation of water absorption coefficient using the TDR method
AIP Conf. Proc. 1866, 040038 (2017)
https://doi.org/10.1063/1.4994518
Study of the thermal properties of selected PCMs for latent heat storage in buildings
AIP Conf. Proc. 1866, 040042 (2017)
https://doi.org/10.1063/1.4994522
Thermal properties of light-weight concrete with waste polypropylene aggregate
AIP Conf. Proc. 1866, 040043 (2017)
https://doi.org/10.1063/1.4994523
Experimental investigations of thermophysical properties of some paraffin waxes industrially manufactured in Poland
AIP Conf. Proc. 1866, 040044 (2017)
https://doi.org/10.1063/1.4994524
REGULAR PAPERS - ENERGY & RESPOSIBILITY 2017
The classification of explosion-proof protected induction motor into adequate temperature and efficiency class
AIP Conf. Proc. 1866, 050001 (2017)
https://doi.org/10.1063/1.4994525
Process of optimization of district heat production by utilizing waste energy from metallurgical processes
AIP Conf. Proc. 1866, 050003 (2017)
https://doi.org/10.1063/1.4994527
An overview of world history of underground coal gasification
AIP Conf. Proc. 1866, 050004 (2017)
https://doi.org/10.1063/1.4994528
Energy comparison between solar thermal power plant and photovoltaic power plant
AIP Conf. Proc. 1866, 050007 (2017)
https://doi.org/10.1063/1.4994531
The effect of welding thermal cycles on the microstructure development of energy components
AIP Conf. Proc. 1866, 050008 (2017)
https://doi.org/10.1063/1.4994532
Monitoring of the solar power plants and performance ratio
AIP Conf. Proc. 1866, 050009 (2017)
https://doi.org/10.1063/1.4994533
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.