Skip Nav Destination
Issues
15 June 2017
PRELIMINARY
SUSTAINABLE INDUSTRIAL PROCESS AND SYSTEM OPTIMISATION
Optimizing cutting conditions on sustainable machining of aluminum alloy to minimize power consumption
AIP Conf. Proc. 1855, 020002 (2017)
https://doi.org/10.1063/1.4985447
Effective production control in an automotive industry: MRP vs. demand-driven MRP
AIP Conf. Proc. 1855, 020004 (2017)
https://doi.org/10.1063/1.4985449
Holding time effect of pack carburizing on fatigue characteristic of v-notch shaft steel specimens
AIP Conf. Proc. 1855, 020005 (2017)
https://doi.org/10.1063/1.4985450
Process quality planning of quality function deployment for carrot syrup
AIP Conf. Proc. 1855, 020009 (2017)
https://doi.org/10.1063/1.4985454
Field oriented control design of inset rotor PMSM drive
AIP Conf. Proc. 1855, 020010 (2017)
https://doi.org/10.1063/1.4985455
Towards an integration of affiliated companies energy audit process system at P.T Astra International
AIP Conf. Proc. 1855, 020012 (2017)
https://doi.org/10.1063/1.4985457
Method to increase ultimate bearing capacity of skirted circular footing
AIP Conf. Proc. 1855, 020013 (2017)
https://doi.org/10.1063/1.4985458
Fouling reduction by ozone-enhanced backwashing process in ultrafiltration of petroleum-based oil in water emulsion
AIP Conf. Proc. 1855, 020016 (2017)
https://doi.org/10.1063/1.4985461
Lagrange multiplier for perishable inventory model considering warehouse capacity planning
AIP Conf. Proc. 1855, 020021 (2017)
https://doi.org/10.1063/1.4985466
Effect of initial treatment in the preparation of natural indigo dye from Indigofera tinctoria
AIP Conf. Proc. 1855, 020022 (2017)
https://doi.org/10.1063/1.4985467
Cradle-to-grave analysis on batik cabut product to reduce environmental impact
AIP Conf. Proc. 1855, 020024 (2017)
https://doi.org/10.1063/1.4985469
PRODUCT DESIGN, MATERIAL ENGINEERING, BUILDING ENGINEERING AND MANAGEMENT
Performance evaluation of court in construction claims settlement of litigation
AIP Conf. Proc. 1855, 030001 (2017)
https://doi.org/10.1063/1.4985471
Effect of gold dopant on structural and optical properties of molybdenum disulfide single crystals
AIP Conf. Proc. 1855, 030003 (2017)
https://doi.org/10.1063/1.4985473
Characteristics of permanent deformation rate of warm mix asphalt with additives variation (BNA-R and zeolite)
AIP Conf. Proc. 1855, 030004 (2017)
https://doi.org/10.1063/1.4985474
Contributions crumb rubber in hot mix asphalt to the resilient modulus
AIP Conf. Proc. 1855, 030005 (2017)
https://doi.org/10.1063/1.4985475
Resilient modulus characteristics of soil subgrade with geopolymer additive in peat
AIP Conf. Proc. 1855, 030006 (2017)
https://doi.org/10.1063/1.4985476
Mechanical properties of Cr-Cu coatings produced by electroplating
AIP Conf. Proc. 1855, 030007 (2017)
https://doi.org/10.1063/1.4985477
Comparative study on diagonal equivalent methods of masonry infill panel
AIP Conf. Proc. 1855, 030011 (2017)
https://doi.org/10.1063/1.4985481
Porosity and wear resistance of flame sprayed tungsten carbide coatings
AIP Conf. Proc. 1855, 030012 (2017)
https://doi.org/10.1063/1.4985482
Hollow glass microsphere-epoxy composite material for helmet application to reduce impact energy due to collision
AIP Conf. Proc. 1855, 030013 (2017)
https://doi.org/10.1063/1.4985483
Speaker box made of composite particle board based on mushroom growing media waste
AIP Conf. Proc. 1855, 030014 (2017)
https://doi.org/10.1063/1.4985484
The influence of plain bar on bond strength of geopolymer concrete
AIP Conf. Proc. 1855, 030017 (2017)
https://doi.org/10.1063/1.4985487
Effect of deacetylation on functional properties of glucomannan
AIP Conf. Proc. 1855, 030020 (2017)
https://doi.org/10.1063/1.4985490
Value engineering on the designed operator work tools for brick and rings wells production
AIP Conf. Proc. 1855, 030022 (2017)
https://doi.org/10.1063/1.4985492
Material nonlinearity plate bending analysis with boundary element method
AIP Conf. Proc. 1855, 030023 (2017)
https://doi.org/10.1063/1.4985493
SUSTAINABLE INFRASTRUCTURE AND BUILT ENVIRONMENT
Traffic safety program for school children through safe action and safe condition
AIP Conf. Proc. 1855, 040001 (2017)
https://doi.org/10.1063/1.4985497
The impact of noise level on students’ learning performance at state elementary school in Medan
AIP Conf. Proc. 1855, 040002 (2017)
https://doi.org/10.1063/1.4985498
Study of crack patterns in beam column joint due to upwards anchoring beam effect
AIP Conf. Proc. 1855, 040004 (2017)
https://doi.org/10.1063/1.4985500
The value of corridor in flat as place attachment in the life of the dwellers
AIP Conf. Proc. 1855, 040005 (2017)
https://doi.org/10.1063/1.4985501
Prediction of surface distress using neural networks
AIP Conf. Proc. 1855, 040006 (2017)
https://doi.org/10.1063/1.4985502
The function of green belt Jatibarang as quality control for the environment of Semarang city
AIP Conf. Proc. 1855, 040007 (2017)
https://doi.org/10.1063/1.4985503
A system to preserve pedicab as cultural heritage in Solo city, Indonesia
AIP Conf. Proc. 1855, 040008 (2017)
https://doi.org/10.1063/1.4985504
Impact analysis of freight vehicle access restriction (A case study of Jakarta Intra Urban Toll way)
AIP Conf. Proc. 1855, 040009 (2017)
https://doi.org/10.1063/1.4985505
Analysis on logistic company action toward the access restriction policy on freight vehicle
AIP Conf. Proc. 1855, 040010 (2017)
https://doi.org/10.1063/1.4985506
Identification of reluctant factors in using footpaths based on the pedestrians’ perception
AIP Conf. Proc. 1855, 040012 (2017)
https://doi.org/10.1063/1.4985508
The utilization characteristics of social facilities in the border area of Semarang city
AIP Conf. Proc. 1855, 040013 (2017)
https://doi.org/10.1063/1.4985509
Discrete event simulation model for external yard choice of import container terminal in a port buffer area
AIP Conf. Proc. 1855, 040014 (2017)
https://doi.org/10.1063/1.4985510
Morphology analysis in middle-downstream area of Progo River due to the debris flow
AIP Conf. Proc. 1855, 040016 (2017)
https://doi.org/10.1063/1.4985512
Flower garden trees’ ability to absorb solar radiation heat for local heat reduction
AIP Conf. Proc. 1855, 040017 (2017)
https://doi.org/10.1063/1.4985513
PRESERVATION, CONSERVATION AND WATER MANAGEMENT
Biodegradation of BOD and ammonia-free using bacterial consortium in aerated fixed film bioreactor (AF2B)
AIP Conf. Proc. 1855, 050001 (2017)
https://doi.org/10.1063/1.4985515
Phenol biodegradation by immobilized Pseudomonas putida FNCC-0071 cells in alginate beads
AIP Conf. Proc. 1855, 050004 (2017)
https://doi.org/10.1063/1.4985518
Drainage network optimization for inundation mitigation case study of ITS Surabaya
AIP Conf. Proc. 1855, 050006 (2017)
https://doi.org/10.1063/1.4985520
GREEN COMPUTING
Design of information systems for population data collection based on client-server at Bagolo village
AIP Conf. Proc. 1855, 060003 (2017)
https://doi.org/10.1063/1.4985526
GREEN ENERGY
Solar energy dryer kinetics using flat-plate finned collector and forced convection for potato drying
AIP Conf. Proc. 1855, 070002 (2017)
https://doi.org/10.1063/1.4985529
Profitability and sustainability of small - medium scale palm biodiesel plant
AIP Conf. Proc. 1855, 070005 (2017)
https://doi.org/10.1063/1.4985532
Analysis of wind energy potential for agriculture pump in mountain area Aceh Besar
AIP Conf. Proc. 1855, 070007 (2017)
https://doi.org/10.1063/1.4985534
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
With synthetic data towards part recognition generalized beyond the training instances
Paul Koch, Marian Schlüter, et al.