Skip Nav Destination
Issues
PRELIMINARY
ARTICLES
The feasibility study on fabrication customized orthotic insole using fused deposition modelling (FDM)
AIP Conf. Proc. 1831, 020001 (2017)
https://doi.org/10.1063/1.4981142
Risk prediction model: Statistical and artificial neural network approach
AIP Conf. Proc. 1831, 020002 (2017)
https://doi.org/10.1063/1.4981143
Numerical analysis for comparison of aerodynamic characteristics of six airfoils
AIP Conf. Proc. 1831, 020004 (2017)
https://doi.org/10.1063/1.4981145
A comparative study on the motion of various objects inside an air tunnel
AIP Conf. Proc. 1831, 020005 (2017)
https://doi.org/10.1063/1.4981146
Aircraft LTO emissions regulations and implementations at European airports
AIP Conf. Proc. 1831, 020006 (2017)
https://doi.org/10.1063/1.4981147
Study the velocity and pressure exerted in front of the filter surface in the kitchen hood system by using ANSYS
AIP Conf. Proc. 1831, 020007 (2017)
https://doi.org/10.1063/1.4981148
Characteristic study of flat spray nozzle by using particle image velocimetry (PIV) and ANSYS simulation method
AIP Conf. Proc. 1831, 020009 (2017)
https://doi.org/10.1063/1.4981150
Mechanical behaviour study on SBR/EVA composite for FDM feedstock fabrication
AIP Conf. Proc. 1831, 020011 (2017)
https://doi.org/10.1063/1.4981152
Determination of physiochemical properties of palm oil methyl ester catalyzed by waste cockle shells
Nurul Fitriah Nasir; Noradila Abdul Latif; Sharifah Adzila Syed Abu Bakar; Mohd Nasrull Abdul Rahman; Siti Norhidayah Selamat; Nurul Nadirah Nasharudin
AIP Conf. Proc. 1831, 020013 (2017)
https://doi.org/10.1063/1.4981154
Analysis of hydrodynamic force acting on commercialized rowing blades using computational fluid dynamics
AIP Conf. Proc. 1831, 020017 (2017)
https://doi.org/10.1063/1.4981158
Energy consumption in residential building: The effect of appliances and human behaviour
AIP Conf. Proc. 1831, 020018 (2017)
https://doi.org/10.1063/1.4981159
Effects of changing airfoil aerodynamic characteristics on turning diffuser performances
AIP Conf. Proc. 1831, 020019 (2017)
https://doi.org/10.1063/1.4981160
The numerical modelling of falling film thickness flow on horizontal tubes
AIP Conf. Proc. 1831, 020020 (2017)
https://doi.org/10.1063/1.4981161
Analysis mist spray development with Al-75 nozzle by using high speed camera
AIP Conf. Proc. 1831, 020023 (2017)
https://doi.org/10.1063/1.4981164
Flow visualization of bubble structure in bubble column reactor for fluid mixing
AIP Conf. Proc. 1831, 020024 (2017)
https://doi.org/10.1063/1.4981165
Numerical solution of Burger’s equation based on Lax-Friedrichs and Lax-Wendroff schemes
AIP Conf. Proc. 1831, 020025 (2017)
https://doi.org/10.1063/1.4981166
Wire-cut EDM of SiSiC-preliminary investigation in machining parameter
AIP Conf. Proc. 1831, 020026 (2017)
https://doi.org/10.1063/1.4981167
Mechanical and physical properties of AlSi10Mg processed through selective laser melting
AIP Conf. Proc. 1831, 020027 (2017)
https://doi.org/10.1063/1.4981168
Investigation of 1-Dimensional ultrasonic vibration compliance mechanism based on finite element analysis
AIP Conf. Proc. 1831, 020028 (2017)
https://doi.org/10.1063/1.4981169
The system design and performance test of hybrid vertical axis wind turbine
AIP Conf. Proc. 1831, 020030 (2017)
https://doi.org/10.1063/1.4981171
Development of vehicle model test-bending of a simple structural surfaces model for automotive vehicle sedan
AIP Conf. Proc. 1831, 020031 (2017)
https://doi.org/10.1063/1.4981172
Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia
AIP Conf. Proc. 1831, 020032 (2017)
https://doi.org/10.1063/1.4981173
Hardness and wear properties of laminated Cr-Ni coatings formed by electroplating
AIP Conf. Proc. 1831, 020034 (2017)
https://doi.org/10.1063/1.4981175
Effect of anodizing voltage and annealing temperature on the growth of titanium dioxide nanotube
AIP Conf. Proc. 1831, 020035 (2017)
https://doi.org/10.1063/1.4981176
One dimensional modeling of a diesel-CNG dual fuel engine
AIP Conf. Proc. 1831, 020036 (2017)
https://doi.org/10.1063/1.4981177
Surface modification of hypereutectic Al-Si alloy via friction stir process
AIP Conf. Proc. 1831, 020037 (2017)
https://doi.org/10.1063/1.4981178
Eco-design of low energy mechanical milling through implementation of quality function deployment and design for sustainability
Muhammad Hanif Abd Rashid; Nik Hisyamudin Muhd Nor; Siti Norhana Selamat; Mohd Fahrul Hassan; Abd Khalil Abd Rahim; Mohd Fauzi Ahmad; Al Emran Ismail; Badrul Omar; Mohd Faiz Mokhtar; Faiz Mohd Turan; Seiji Yokoyama
AIP Conf. Proc. 1831, 020039 (2017)
https://doi.org/10.1063/1.4981180
Comparative performance study of smart structure for thermal microactuators
AIP Conf. Proc. 1831, 020041 (2017)
https://doi.org/10.1063/1.4981182
Drop test analysis of fuselage section of R80 commuter aircraft by using finite element method
AIP Conf. Proc. 1831, 020042 (2017)
https://doi.org/10.1063/1.4981183
The beneficial effect of slip on the hydrodynamic lubrication in the lubricated sliding contact
AIP Conf. Proc. 1831, 020043 (2017)
https://doi.org/10.1063/1.4981184
Benchmarking of dimensional accuracy and surface roughness for AlSi10Mg part by selective laser melting (SLM)
AIP Conf. Proc. 1831, 020047 (2017)
https://doi.org/10.1063/1.4981188
A survey on the use of ram air turbine in aircraft
AIP Conf. Proc. 1831, 020048 (2017)
https://doi.org/10.1063/1.4981189
Swarm size and iteration number effects to the performance of PSO algorithm in RFID tag coverage optimization
AIP Conf. Proc. 1831, 020051 (2017)
https://doi.org/10.1063/1.4981192
Wire-cut EDM of SiSiC-preliminary investigation in machining parameter
AIP Conf. Proc. 1831, 020052 (2017)
https://doi.org/10.1063/1.4981193
Numerical tension adjustment of x-ray membrane to represent goat skin kompang
AIP Conf. Proc. 1831, 020056 (2017)
https://doi.org/10.1063/1.4981197
The improvement of surface roughness by polishing method of arcylic door panel at Taishi Tech Sdn Bhd
AIP Conf. Proc. 1831, 020058 (2017)
https://doi.org/10.1063/1.4981199
Path planning of decentralized multi-quadrotor based on fuzzy-cell decomposition algorithm
AIP Conf. Proc. 1831, 020060 (2017)
https://doi.org/10.1063/1.4981201
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.