Skip Nav Destination
Issues
PRELIMINARY
ARTICLES
Fabrication and design of vanadium oxide microbolometer
AIP Conf. Proc. 1809, 020001 (2017)
https://doi.org/10.1063/1.4975416
Fabrication and characterization of Gd2O2SO4:Tb3+ phosphors by sol-gel method
AIP Conf. Proc. 1809, 020003 (2017)
https://doi.org/10.1063/1.4975418
Production and characterization of magnetic and luminescent Gd2O2SO4:Eu3+ nanoparticles by sol-gel technique
AIP Conf. Proc. 1809, 020004 (2017)
https://doi.org/10.1063/1.4975419
Enzyme-linked immunosorbent assay for determination of aflatoxin M1 based on magnetic nanoparticles
AIP Conf. Proc. 1809, 020005 (2017)
https://doi.org/10.1063/1.4975420
Crystallization behaviors and seal application of basalt based glass-ceramics
AIP Conf. Proc. 1809, 020006 (2017)
https://doi.org/10.1063/1.4975421
Analysis of elastic scattering of 4He + 58Ni and 4He + 60Ni using semiclassical models
AIP Conf. Proc. 1809, 020007 (2017)
https://doi.org/10.1063/1.4975422
Successive dehumidification/regeneration cycles by LiCL desiccant for air-conditioning system
AIP Conf. Proc. 1809, 020009 (2017)
https://doi.org/10.1063/1.4975424
Polymer/glass nanocomposite fiber as an insulating material
AIP Conf. Proc. 1809, 020013 (2017)
https://doi.org/10.1063/1.4975428
The effect of the impactor diameter and temperature on low velocity impact behavior of CFRP laminates
AIP Conf. Proc. 1809, 020014 (2017)
https://doi.org/10.1063/1.4975429
Multiplex fluorescent immunoassay device based on magnetic nanoparticles
AIP Conf. Proc. 1809, 020018 (2017)
https://doi.org/10.1063/1.4975433
Effect of Ca and Zn additions on the mechanical properties of Mg produced by powder metallurgy
AIP Conf. Proc. 1809, 020019 (2017)
https://doi.org/10.1063/1.4975434
Finite element analysis of stress transfer mechanism from matrix to the fiber in SWCN reinforced nanocomposites
AIP Conf. Proc. 1809, 020021 (2017)
https://doi.org/10.1063/1.4975436
Number-projected nuclear moment of inertia in the isovector pairing case within the Richardson model
AIP Conf. Proc. 1809, 020023 (2017)
https://doi.org/10.1063/1.4975438
Improvement of the microstructure of Sn – Bi lead free solder alloy
AIP Conf. Proc. 1809, 020024 (2017)
https://doi.org/10.1063/1.4975439
High pressure assisted WC/Co hardmetal sintering–effect of sintering temperature
AIP Conf. Proc. 1809, 020025 (2017)
https://doi.org/10.1063/1.4975440
Synthesis and testing of a conducting polymeric composite material for lightning strike protection applications
AIP Conf. Proc. 1809, 020026 (2017)
https://doi.org/10.1063/1.4975441
Detection of trace elements in DI water and comparison of several water solutions by using EF-FLRD chemical sensors
AIP Conf. Proc. 1809, 020027 (2017)
https://doi.org/10.1063/1.4975442
Improvement of mechanical properties of fiber reinforced mortar using a linear optimization method
AIP Conf. Proc. 1809, 020028 (2017)
https://doi.org/10.1063/1.4975443
Mechanical, hydric and thermal properties of fine-grained high performance concrete
AIP Conf. Proc. 1809, 020029 (2017)
https://doi.org/10.1063/1.4975444
Characterization of physico-mechanical properties of Z-phase strengthened ferritic steels using internal friction measurements in the range 25 ÷ 750°C
E. R. Kutelia; T. A. Dzigrashvili; T. G. Kukava; G. Sh. Darsavelidze; I. R. Kurashvili; H. Riedel; B. Donth
AIP Conf. Proc. 1809, 020030 (2017)
https://doi.org/10.1063/1.4975445
Computational modeling of the effect of external environment on the degradation of high-performance concrete
AIP Conf. Proc. 1809, 020032 (2017)
https://doi.org/10.1063/1.4975447
Fabrication and characterization of alumina tube by thermal spray forming
AIP Conf. Proc. 1809, 020034 (2017)
https://doi.org/10.1063/1.4975449
Investigation of the martensitic transformation of (Cu-Zn-Ni) shape memory alloys
AIP Conf. Proc. 1809, 020036 (2017)
https://doi.org/10.1063/1.4975451
Influence of different nanoparticles on electrochemical behavior of glucose biosensor
AIP Conf. Proc. 1809, 020037 (2017)
https://doi.org/10.1063/1.4975452
Damage localization in beam-like structures using changes in modal strain energy
AIP Conf. Proc. 1809, 020038 (2017)
https://doi.org/10.1063/1.4975453
Preparation and characterization of LaMnO3 and LaNiO3 perovskite type oxides by the hydrothermal synthesis method
AIP Conf. Proc. 1809, 020040 (2017)
https://doi.org/10.1063/1.4975455
Magnetic anisotropy in grain oriented steels cut through mechanical punching and electro-erosion technologies
AIP Conf. Proc. 1809, 020042 (2017)
https://doi.org/10.1063/1.4975457
Synthesis of nanostructured iron oxides and new magnetic ceramics using sol-gel and SPS techniques
E. K. Papynov; O. O. Shichalin; A. A. Belov; A. S. Portnyagin; V. Yu. Mayorov; E. A. Gridasova; A. V. Golub; A. S. Nepomnyashii; I. G. Tananaev; V. A. Avramenko
AIP Conf. Proc. 1809, 020043 (2017)
https://doi.org/10.1063/1.4975458
Sol-gel synthesis of magnetic sorbents based on porous iron oxides for the removal of U(VI) from aqueous solution
E. K. Papynov; A. S. Portnyagin; A. I. Cherednichenko; I. A. Tkachenko; E. B. Modin; A. N. Dran’kov; A. A. Kvach; I. V. Zemchenko; I. G. Tananaev; V. A. Avramenko
AIP Conf. Proc. 1809, 020044 (2017)
https://doi.org/10.1063/1.4975459
Water resistance and thermal properties of polyvinyl alcohol-starch fiber blend film
AIP Conf. Proc. 1809, 020045 (2017)
https://doi.org/10.1063/1.4975460
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.