Skip Nav Destination
Issues
3 January 2017
PRELIMINARY
Preface: International Conference on Engineering, Science and Nanotechnology 2016 (ICESNANO 2016)
AIP Conf. Proc. 1788, 010001 (2017)
https://doi.org/10.1063/1.4968247
Group Photo: International Conference on Engineering, Science and Nanotechnology 2016 (ICESNANO 2016)
AIP Conf. Proc. 1788, 010002 (2017)
https://doi.org/10.1063/1.4968248
PLENARY AND INVITED PAPERS
Heat transfer characteristics of various kinds of ground heat exchangers for ground source heat pump system
AIP Conf. Proc. 1788, 020001 (2017)
https://doi.org/10.1063/1.4968249
Study toward high-performance thermally driven air-conditioning systems
AIP Conf. Proc. 1788, 020002 (2017)
https://doi.org/10.1063/1.4968250
Transport properties measurement on low GWP alternative refrigerants
AIP Conf. Proc. 1788, 020003 (2017)
https://doi.org/10.1063/1.4968251
Generation of high-temperature steam from unused thermal energy by a novel adsorption heat pump
AIP Conf. Proc. 1788, 020004 (2017)
https://doi.org/10.1063/1.4968252
CONTRIBUTED ORAL PAPERS
Performance and driveline analyses of engine capacity in range extender engine hybrid vehicle
AIP Conf. Proc. 1788, 030001 (2017)
https://doi.org/10.1063/1.4968254
Improving ion-exchange membrane properties by the role of nanoparticles
AIP Conf. Proc. 1788, 030003 (2017)
https://doi.org/10.1063/1.4968256
Concentric tube heat exchanger installed by twisted tapes using various wings with alternate axes
AIP Conf. Proc. 1788, 030005 (2017)
https://doi.org/10.1063/1.4968258
A modified Newton’s method used to solve a steady flow problem based on the shallow water equations
AIP Conf. Proc. 1788, 030006 (2017)
https://doi.org/10.1063/1.4968259
Comparison between SVPWM two level in internal and external circle of hexagon
AIP Conf. Proc. 1788, 030007 (2017)
https://doi.org/10.1063/1.4968260
Knock detection system to improve petrol engine performance, using microphone sensor
AIP Conf. Proc. 1788, 030009 (2017)
https://doi.org/10.1063/1.4968262
Effect of sintering time on the performance of turmeric dye-sensitized solar cells
AIP Conf. Proc. 1788, 030010 (2017)
https://doi.org/10.1063/1.4968263
Three-dimensional flow in the vicinity of a circular cylinder mounted to a flat plate at high Reynolds number
AIP Conf. Proc. 1788, 030012 (2017)
https://doi.org/10.1063/1.4968265
Numerical simulation of flow through pipe with magnitude of valve opening as variant at Re 2×105
AIP Conf. Proc. 1788, 030013 (2017)
https://doi.org/10.1063/1.4968266
Comparison of wake behind finned cylinders with fin pitch variations in cross-flow
AIP Conf. Proc. 1788, 030014 (2017)
https://doi.org/10.1063/1.4968267
Performance analysis of the electric vehicle air conditioner by replacing hydrocarbon refrigerant
AIP Conf. Proc. 1788, 030015 (2017)
https://doi.org/10.1063/1.4968268
Development of briquette fuel from cashew shells and rice husk mixture
AIP Conf. Proc. 1788, 030017 (2017)
https://doi.org/10.1063/1.4968270
The study of membrane formation via phase inversion method by cloud point and light scattering experiment
AIP Conf. Proc. 1788, 030018 (2017)
https://doi.org/10.1063/1.4968271
A numerical study of condensation heat transfer for R-134a in annular flow regime inside horizontal tube
AIP Conf. Proc. 1788, 030020 (2017)
https://doi.org/10.1063/1.4968273
Mass transfer in stirred tank for phenolic extraction from coal tar
AIP Conf. Proc. 1788, 030021 (2017)
https://doi.org/10.1063/1.4968274
High crystalline Cu2ZnSnS4 semiconductor prepared from low toxicity ethanol-based precursors
AIP Conf. Proc. 1788, 030022 (2017)
https://doi.org/10.1063/1.4968275
Effect of concave rectangular winglet vortex generator on convection coefficient of heat transfer
AIP Conf. Proc. 1788, 030025 (2017)
https://doi.org/10.1063/1.4968278
Numerical study of 3D brine flow across ice can to analyze heat transfer characteristics
AIP Conf. Proc. 1788, 030027 (2017)
https://doi.org/10.1063/1.4968280
Effect of annealing temperature of titanium dioxide thin films on structural and electrical properties
AIP Conf. Proc. 1788, 030030 (2017)
https://doi.org/10.1063/1.4968283
Effect of electrode and weld current on the physical and mechanical properties of cast iron welding
AIP Conf. Proc. 1788, 030031 (2017)
https://doi.org/10.1063/1.4968284
Performance prediction of serpentine type compact magnetorheological brake prototype
AIP Conf. Proc. 1788, 030032 (2017)
https://doi.org/10.1063/1.4968285
Fins effectiveness and efficiency with position function of rhombus sectional area in unsteady condition
AIP Conf. Proc. 1788, 030034 (2017)
https://doi.org/10.1063/1.4968287
Rheological properties of a reclaimed waste tire rubber through high-pressure high-temperature sintering
AIP Conf. Proc. 1788, 030036 (2017)
https://doi.org/10.1063/1.4968289
Study the effect of active carbon modified using HNO3 for carbon electrodes in capacitive deionization system
AIP Conf. Proc. 1788, 030041 (2017)
https://doi.org/10.1063/1.4968294
Ultrasonic irradiation-driven sonocatalytic degradation of methylene blue by ternary Fe3O4/ZnO/NGP nanocomposites
AIP Conf. Proc. 1788, 030042 (2017)
https://doi.org/10.1063/1.4968295
Effect of anneal temperature on fluorine doped tin oxide (FTO) nanostructured fabricated using hydrothermal method
M. K. Ahmad; N. A. Marzuki; C. F. Soon; N. Nafarizal; R. Sanudin; A. B. Suriani; A. Mohamed; M. Shimomura; K. Murakami; M. H. Mamat; M. F. Malek
AIP Conf. Proc. 1788, 030044 (2017)
https://doi.org/10.1063/1.4968297
The influence of co-sintering Bi2O3 on Yb0.2Ce0.8O2-δ ceramic SOFC
AIP Conf. Proc. 1788, 030045 (2017)
https://doi.org/10.1063/1.4968298
The influence of surface modification on sound absorption coefficient of albizzia wood absorber
AIP Conf. Proc. 1788, 030047 (2017)
https://doi.org/10.1063/1.4968300
The effect of polymer concentration on flux stability of polysulfone membrane
AIP Conf. Proc. 1788, 030048 (2017)
https://doi.org/10.1063/1.4968301
Effect of acetylation treatment and soaking time to bending strength of sugar palm fiber composite
AIP Conf. Proc. 1788, 030049 (2017)
https://doi.org/10.1063/1.4968302
Experimental study of flexural capacity on bamboo ori strip notched v reinforced concrete beams
AIP Conf. Proc. 1788, 030052 (2017)
https://doi.org/10.1063/1.4968305
The engineering of soft ferromagnetic plane by AISI 304 hardening process
AIP Conf. Proc. 1788, 030053 (2017)
https://doi.org/10.1063/1.4968306
Application of sandwich honeycomb carbon/glass fiber-honeycomb composite in the floor component of electric car
AIP Conf. Proc. 1788, 030056 (2017)
https://doi.org/10.1063/1.4968309
The effect of core thickness variation of sandwich composite cantala rHDPE on mechanical strength of bending test
AIP Conf. Proc. 1788, 030058 (2017)
https://doi.org/10.1063/1.4968311
Effect of codoping cobalt and aluminum on enhancing the piezoelectricity properties of fiber-based zinc oxide
AIP Conf. Proc. 1788, 030059 (2017)
https://doi.org/10.1063/1.4968312
Effects of alkali and steaming on mechanical properties of snake fruit (Salacca) fiber
AIP Conf. Proc. 1788, 030060 (2017)
https://doi.org/10.1063/1.4968313
Adhesion strength study of sintered silver for power electronic devices application
AIP Conf. Proc. 1788, 030061 (2017)
https://doi.org/10.1063/1.4968314
Fabrication and characterization dye sensitized solar cell (DSSC) based on TiO2/SnO2 composite
AIP Conf. Proc. 1788, 030062 (2017)
https://doi.org/10.1063/1.4968315
Estimation of calcaneal loading during standing from human footprint depths using 3D scanner
AIP Conf. Proc. 1788, 030063 (2017)
https://doi.org/10.1063/1.4968316
Failure analysis and evaluation of a six cylinders crankshaft for marine diesel generator
AIP Conf. Proc. 1788, 030064 (2017)
https://doi.org/10.1063/1.4968317
Simulation model of harmonics reduction technique using shunt active filter by cascade multilevel inverter method
AIP Conf. Proc. 1788, 030065 (2017)
https://doi.org/10.1063/1.4968318
Hot-corrosion of AISI 1020 steel in a molten NaCl/Na2SO4 eutectic at 700°C
AIP Conf. Proc. 1788, 030066 (2017)
https://doi.org/10.1063/1.4968319
Synthesis of carbon nanodots from waste paper with hydrothermal method
AIP Conf. Proc. 1788, 030069 (2017)
https://doi.org/10.1063/1.4968322
Evaluation of PD/PID controller for insulin control on blood glucose regulation in a Type-I diabetes
AIP Conf. Proc. 1788, 030072 (2017)
https://doi.org/10.1063/1.4968325
Pt nanoparticle on La0.02Na0.98TaO3 catalyst for hydrogen evolution from glycerol aqueous solution
AIP Conf. Proc. 1788, 030073 (2017)
https://doi.org/10.1063/1.4968326
Redesigning the continuous vacuum sealer packaging machine to improve the processing speed
AIP Conf. Proc. 1788, 030074 (2017)
https://doi.org/10.1063/1.4968327
Camouflage design and head measurement characteristic of Indonesian armoured vehicle helmet
AIP Conf. Proc. 1788, 030075 (2017)
https://doi.org/10.1063/1.4968328
The effect of linear spring number at side load of McPherson suspension in electric city car
AIP Conf. Proc. 1788, 030076 (2017)
https://doi.org/10.1063/1.4968329
The effect of load and thickness variation on stress analysis of monocoque frame of electric city car using FEM
AIP Conf. Proc. 1788, 030077 (2017)
https://doi.org/10.1063/1.4968330
Lethality of Rendang packaged in multilayer retortable pouch with sterilization process
AIP Conf. Proc. 1788, 030079 (2017)
https://doi.org/10.1063/1.4968332
The effect of different graphene surface area on photocatalytic activity of LaFeO3 nanoparticles
AIP Conf. Proc. 1788, 030080 (2017)
https://doi.org/10.1063/1.4968333
Fault diagnosis of roller bearing using parameter evaluation technique and multi-class support vector machine
AIP Conf. Proc. 1788, 030081 (2017)
https://doi.org/10.1063/1.4968334
Preparation of activated carbon from mangrove propagule waste by H3PO4 activation for Pb2+ adsorption
AIP Conf. Proc. 1788, 030082 (2017)
https://doi.org/10.1063/1.4968335
Sediment characteristic on hydropower plant Bakaru, South Sulawesi
AIP Conf. Proc. 1788, 030083 (2017)
https://doi.org/10.1063/1.4968336
Finite element analysis of electric bicycle frame geometries
AIP Conf. Proc. 1788, 030084 (2017)
https://doi.org/10.1063/1.4968337
Constrained H∞/LTR control design for a mobile inverted pendulum
AIP Conf. Proc. 1788, 030085 (2017)
https://doi.org/10.1063/1.4968338
A hardware acceleration based on high-level synthesis approach for glucose-insulin analysis
AIP Conf. Proc. 1788, 030087 (2017)
https://doi.org/10.1063/1.4968340
The development of IoT based BBT charting and monitoring using ThingSpeak
AIP Conf. Proc. 1788, 030088 (2017)
https://doi.org/10.1063/1.4968341
IT priority troubleshooting using analytical hierarchy process method (case study at the Indonesian Railways Co)
AIP Conf. Proc. 1788, 030089 (2017)
https://doi.org/10.1063/1.4968342
Removal performance of ion from groundwater by electrodialysis
AIP Conf. Proc. 1788, 030090 (2017)
https://doi.org/10.1063/1.4968343
Growth and characterization of nanostructured CuO films via CBD approach for oxygen gas sensing
AIP Conf. Proc. 1788, 030091 (2017)
https://doi.org/10.1063/1.4968344
Simple fabricating PCB-based inter digital capacitor for glucose biosensor
AIP Conf. Proc. 1788, 030092 (2017)
https://doi.org/10.1063/1.4968345
Effect of core manufacture process for electric motor efficiency
AIP Conf. Proc. 1788, 030093 (2017)
https://doi.org/10.1063/1.4968346
Numerical study of multiple-channel diffusers on the rear bus body
AIP Conf. Proc. 1788, 030094 (2017)
https://doi.org/10.1063/1.4968347
Size dependence effect of carbon-based anode material on intercalation characteristics of Li-ion battery
AIP Conf. Proc. 1788, 030095 (2017)
https://doi.org/10.1063/1.4968348
Shelf-life prediction of canned “nasi uduk” using accelerated shelf-life test (ASLT) - Arrhenius model
Muhamad Kurniadi; Nur Salam; Annisa Kusumaningrum; Asri Nursiwi; Mukhamad Angwar; Agus Susanto; Asep Nurhikmat; Triwiyono; Andri Frediansyah
AIP Conf. Proc. 1788, 030096 (2017)
https://doi.org/10.1063/1.4968349
The effect of milling time and sintering temperature on formation of nanoparticles barium strontium titanate
AIP Conf. Proc. 1788, 030099 (2017)
https://doi.org/10.1063/1.4968352
VLPs of HCV local isolates for HCV immunoassay diagnostic approach in Indonesia
AIP Conf. Proc. 1788, 030100 (2017)
https://doi.org/10.1063/1.4968353
Structural studies of ZnO nanostructures by varying the deposition parameters
AIP Conf. Proc. 1788, 030101 (2017)
https://doi.org/10.1063/1.4968354
Synthesis of LiFePO4/C composites based on natural iron stone using a sol gel method
AIP Conf. Proc. 1788, 030102 (2017)
https://doi.org/10.1063/1.4968355
Adomian decomposition method used to solve the gravity wave equations
AIP Conf. Proc. 1788, 030103 (2017)
https://doi.org/10.1063/1.4968356
Dye-Sensitized Solar Cells (DSSCs) reengineering using TiO2 with natural dye (anthocyanin)
Rohmat Subodro; Budi Kristiawan; Ari Handono Ramelan; Sayekti Wahyuningsih; Hanik Munawaroh; Qonita Awliya Hanif; Liya Nikmatul Maula Zulfa Saputri
AIP Conf. Proc. 1788, 030104 (2017)
https://doi.org/10.1063/1.4968357
FPGA in-the-loop simulations of cardiac excitation model under voltage clamp conditions
AIP Conf. Proc. 1788, 030105 (2017)
https://doi.org/10.1063/1.4968358
The subsurface three-dimensional modeling of volcano arc of Flores island based on gravity data analysis
AIP Conf. Proc. 1788, 030106 (2017)
https://doi.org/10.1063/1.4968359
Manufacturing temperature and turbidity sensor based on ATMega 8535 microcontroller
AIP Conf. Proc. 1788, 030108 (2017)
https://doi.org/10.1063/1.4968361
Application of static retort thermal processing technology for dried beef Rendang production: Evaluation of its post-processing on microbiological and physicochemical properties
Andri Frediansyah; Anggita Sari Praharasti; Annisa Kusumaningrum; Asep Nurhikmat; Agus Susanto; Yuniar Khasanah; Rifa Nurhayati
AIP Conf. Proc. 1788, 030109 (2017)
https://doi.org/10.1063/1.4968362
Soft ferromagnetic properties of Ni44Fe6Mn32Al18 doped Co partially
AIP Conf. Proc. 1788, 030110 (2017)
https://doi.org/10.1063/1.4968363
Optimization of oxygen on Nb-doped TiO2 using DC and RF magnetron sputtering using composite and metal target
AIP Conf. Proc. 1788, 030112 (2017)
https://doi.org/10.1063/1.4968365
Comparative study between chemical and atmospheric pressure plasma jet cleaning on glass substrate
AIP Conf. Proc. 1788, 030113 (2017)
https://doi.org/10.1063/1.4968366
The influence of white and blue silica gels as adsorbents in adsorptive-distillation of ethanol-water mixture
AIP Conf. Proc. 1788, 030114 (2017)
https://doi.org/10.1063/1.4968367
Controlled defect on multilayer graphene surface by oxygen plasma
AIP Conf. Proc. 1788, 030117 (2017)
https://doi.org/10.1063/1.4968370
Surfactant-assisted synthesis of Ba0.7Sr0.3TiO3 nanoparticles by mechanical alloying and ultrasonic irradiation
AIP Conf. Proc. 1788, 030119 (2017)
https://doi.org/10.1063/1.4968372
Effect of annealing temperature on the properties of copper oxide films prepared by dip coating technique
AIP Conf. Proc. 1788, 030121 (2017)
https://doi.org/10.1063/1.4968374
Phase analysis of ZrO2-SiO2 systems synthesized through Ball milling mechanical activations
AIP Conf. Proc. 1788, 030122 (2017)
https://doi.org/10.1063/1.4968375
Performance enhancement of dye-sensitized solar cells (DSSCs) using a natural sensitizer
AIP Conf. Proc. 1788, 030123 (2017)
https://doi.org/10.1063/1.4968376
Sono- and photocatalytic activities of SnO2 nanoparticles for degradation of cationic and anionic dyes
AIP Conf. Proc. 1788, 030125 (2017)
https://doi.org/10.1063/1.4968378
Effects of Al doping on structural, morphology, electrical and optical properties of TiO2 thin film
AIP Conf. Proc. 1788, 030130 (2017)
https://doi.org/10.1063/1.4968383
Experimental study of the effect of addition of gold nanoparticles on CdSe quantum dots sensitized solar cells
AIP Conf. Proc. 1788, 030132 (2017)
https://doi.org/10.1063/1.4968385
Comparison between absolute densities of metastable state and ground state of atoms in CZTS sputtering plasmas
AIP Conf. Proc. 1788, 030133 (2017)
https://doi.org/10.1063/1.4968386
Effect of gas on the structural and electrical properties of titanium dioxide film
AIP Conf. Proc. 1788, 030134 (2017)
https://doi.org/10.1063/1.4968387
CONTRIBUTED POSTER PAPERS
Current progress on zeolite membrane reactor for CO2 hydrogenation
AIP Conf. Proc. 1788, 040001 (2017)
https://doi.org/10.1063/1.4968389
Conceptual framework on the application of biomechanical measurement methods in driving behavior study
AIP Conf. Proc. 1788, 040002 (2017)
https://doi.org/10.1063/1.4968390
Supported ionic liquid membrane in membrane reactor
AIP Conf. Proc. 1788, 040003 (2017)
https://doi.org/10.1063/1.4968391
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.