Skip Nav Destination
Issues
PRELIMINARY
ARTICLES
Fracture toughness and oxidation resistance of Ti-Al-N coatings on stainless steel substrates
AIP Conf. Proc. 1783, 020002 (2016)
https://doi.org/10.1063/1.4966295
Physicochemical technologies for enhanced oil recovery in deposits with difficult-to-recover reserves
AIP Conf. Proc. 1783, 020004 (2016)
https://doi.org/10.1063/1.4966297
Cryogels for oil and gas field construction under the conditions of arctic zone
AIP Conf. Proc. 1783, 020005 (2016)
https://doi.org/10.1063/1.4966298
Determination of the parameters of plasticity models of geological media on the base of computer simulation
AIP Conf. Proc. 1783, 020007 (2016)
https://doi.org/10.1063/1.4966300
A computational study of the dynamic deformation and fracture in a coated material
AIP Conf. Proc. 1783, 020009 (2016)
https://doi.org/10.1063/1.4966302
Computational mesomechanics of surface-modified titanium
R. R. Balokhonov; S. A. Martynov; V. A. Romanova; A. V. Panin; M. S. Kazachenok; E. E. Batukhtina; V. S. Shakhijanov
AIP Conf. Proc. 1783, 020010 (2016)
https://doi.org/10.1063/1.4966303
On the plastic flow localization of martensitic stainless steel saturated with hydrogen
AIP Conf. Proc. 1783, 020011 (2016)
https://doi.org/10.1063/1.4966304
Laws of plastic deformation localization of aluminum monocrystals at different scale structural levels
AIP Conf. Proc. 1783, 020014 (2016)
https://doi.org/10.1063/1.4966307
Attosecond nanotechnology: Quantum dots of nanoelectromechanical systems of CuInxGa1–xSe2 compounds
AIP Conf. Proc. 1783, 020015 (2016)
https://doi.org/10.1063/1.4966308
Tribological properties of epoxy composite materials for marine and river transport
AIP Conf. Proc. 1783, 020020 (2016)
https://doi.org/10.1063/1.4966313
Directionally solidified Al2O3/GAP eutectic ceramics by micro-pulling-down method
AIP Conf. Proc. 1783, 020021 (2016)
https://doi.org/10.1063/1.4966314
Welding of titanium and stainless steel using the composite insert
AIP Conf. Proc. 1783, 020023 (2016)
https://doi.org/10.1063/1.4966316
First order accuracy conservative smooth particle method for elastic-plastic flows with contacts and free surfaces
AIP Conf. Proc. 1783, 020024 (2016)
https://doi.org/10.1063/1.4966317
The character of elastic deformations on the interface by the passing of longitudinal wave
AIP Conf. Proc. 1783, 020025 (2016)
https://doi.org/10.1063/1.4966318
Influence of the gas shielding method upon the properties of the weld joints
AIP Conf. Proc. 1783, 020026 (2016)
https://doi.org/10.1063/1.4966319
Tensile strength on friction stir processed AMg5 (5083) aluminum alloy
AIP Conf. Proc. 1783, 020027 (2016)
https://doi.org/10.1063/1.4966320
Mechanical properties of three-component additive manufactured composites at elevated and cool temperatures
AIP Conf. Proc. 1783, 020028 (2016)
https://doi.org/10.1063/1.4966321
Mechanical strength of additive manufactured carbon fiber reinforced polyetheretherketone
AIP Conf. Proc. 1783, 020029 (2016)
https://doi.org/10.1063/1.4966322
Orientation dependence of compression deformation on 1570C aluminum alloy
AIP Conf. Proc. 1783, 020030 (2016)
https://doi.org/10.1063/1.4966323
Mechanical strength characterization of three-component composite structural components
AIP Conf. Proc. 1783, 020031 (2016)
https://doi.org/10.1063/1.4966324
Coupled model of composite synthesis allowing the melting of one of the components
AIP Conf. Proc. 1783, 020032 (2016)
https://doi.org/10.1063/1.4966325
Synthesis conditions and sintered ZrW2O8 structure
AIP Conf. Proc. 1783, 020036 (2016)
https://doi.org/10.1063/1.4966329
Complex oxide with negative thermal expansion for producing ceramic matrix composites with invar effect
AIP Conf. Proc. 1783, 020037 (2016)
https://doi.org/10.1063/1.4966330
Structural modification of heat treated steel 10Mn2VNbAl and its properties under tension
AIP Conf. Proc. 1783, 020038 (2016)
https://doi.org/10.1063/1.4966331
Changes in physical and mechanical properties of ferritic-martensitic 13Cr2MoNbVB steel irradiated by fast neutrons
AIP Conf. Proc. 1783, 020040 (2016)
https://doi.org/10.1063/1.4966333
Theoretical study of strength of elastic-plastic water-saturated interface under constrained shear
AIP Conf. Proc. 1783, 020042 (2016)
https://doi.org/10.1063/1.4966335
Molecular dynamics study of the frictional properties of silica nanoparticles in an amorphous state
AIP Conf. Proc. 1783, 020043 (2016)
https://doi.org/10.1063/1.4966336
Sliding simulation of automotive brake primary contact with variable amounts of copper and graphite nanoparticles
AIP Conf. Proc. 1783, 020044 (2016)
https://doi.org/10.1063/1.4966337
Shock-wave and spalling phenomena in ultrafine-grained and coarse-grained (α + β) alloy Ti-Al-V treated by a nanosecond relativistic high-current electron beam
E. F. Dudarev; A. B. Markov; G. P. Bakach; T. Yu. Maletkina; N. N. Belov; A. N. Tabachenko; A. B. Skosirskii; M. V. Habibullin; E. V. Yakovlev
AIP Conf. Proc. 1783, 020047 (2016)
https://doi.org/10.1063/1.4966340
Possibilities of tribospectroscopy using two indenters for identifying defects in the surface layer
AIP Conf. Proc. 1783, 020049 (2016)
https://doi.org/10.1063/1.4966342
Phase transformations in Zr-Y-O nanostructured coatings using high-temperature TEM investigation
AIP Conf. Proc. 1783, 020055 (2016)
https://doi.org/10.1063/1.4966348
Oriented microtexturing on the surface of high-speed steel cutting tool
AIP Conf. Proc. 1783, 020057 (2016)
https://doi.org/10.1063/1.4966350
Towards the problem of forming full strength welded joints on aluminum alloy sheets. Part I: AA2024
AIP Conf. Proc. 1783, 020058 (2016)
https://doi.org/10.1063/1.4966351
Nanostructure of NiTi surface layers after Ta ion implantation
AIP Conf. Proc. 1783, 020060 (2016)
https://doi.org/10.1063/1.4966353
Evolution of porous structure and texture in nanoporous SiO2/Al2O3 materials during calcination
AIP Conf. Proc. 1783, 020061 (2016)
https://doi.org/10.1063/1.4966354
Effect of annealing on creep of titanium VT16 alloy in the ultrafine-grained state
AIP Conf. Proc. 1783, 020063 (2016)
https://doi.org/10.1063/1.4966356
Development of DEM formalism to modeling the dynamic response of brittle solids
AIP Conf. Proc. 1783, 020064 (2016)
https://doi.org/10.1063/1.4966357
Mathematical modeling of the stress-strain state of the outlet guide vane made of various materials
AIP Conf. Proc. 1783, 020065 (2016)
https://doi.org/10.1063/1.4966358
Influence of temperature on microstructure parameters and microhardness of dispersion-hardened V–Cr–Zr–W alloy after deformation by torsion under pressure
Konstantin V. Grinyaev; Ivan V. Smirnov; Vladislav L. Radishevsky; Ivan A. Ditenberg; Alexander N. Tyumentsev; Vyacheslav M. Chernov; Alexander V. Korznikov
AIP Conf. Proc. 1783, 020066 (2016)
https://doi.org/10.1063/1.4966359
Effect of recrystallization annealing on the inelastic properties of TiNi alloy under bending
AIP Conf. Proc. 1783, 020067 (2016)
https://doi.org/10.1063/1.4966360
Nanoscale level of the deformation band formation in bainite steel
AIP Conf. Proc. 1783, 020068 (2016)
https://doi.org/10.1063/1.4966361
Physical nature of rail strengthening in long term operation
Victor Gromov; Oleg Peregudov; Yurii Ivanov; Alexandr Glezer; Konstantin Morozov; Krestina Aksenova; Olga Semina
AIP Conf. Proc. 1783, 020069 (2016)
https://doi.org/10.1063/1.4966362
Multicentric genesis of material structure: Development of the percolation model and some applications
AIP Conf. Proc. 1783, 020072 (2016)
https://doi.org/10.1063/1.4966365
Evaluation of copolymer conformation states of vinylchloride-maleic anhydride
AIP Conf. Proc. 1783, 020073 (2016)
https://doi.org/10.1063/1.4966366
Structure, deformation behavior and failure of aluminum and copper processed by accumulative roll bonding
AIP Conf. Proc. 1783, 020076 (2016)
https://doi.org/10.1063/1.4966369
Electric arc surfacing on low carbon steel: Structure and properties
AIP Conf. Proc. 1783, 020077 (2016)
https://doi.org/10.1063/1.4966370
Structure and tensile fracture of 1570C aluminum alloy
T. A. Kalashnikova; S. Yu. Tarasov; A. V. Chumaevskii; A. V. Filippov; E. A. Kolubaev; V. E. Rubtsov; A. A. Eliseev; V. A. Beloborodov
AIP Conf. Proc. 1783, 020079 (2016)
https://doi.org/10.1063/1.4966372
Towards the problem of forming full strength welded joints on aluminum alloy sheets. Part II: AA7475
AIP Conf. Proc. 1783, 020080 (2016)
https://doi.org/10.1063/1.4966373
Plasma immersion ion implantation for surface treatment of complex branched structures
Oleg A. Kashin; Alexander I. Lotkov; Dmitry P. Borisov; Vladimir A. Slabodchikov; Vladimir M. Kuznetsov; Andrey N. Kudryashov; Konstantin V. Krukovsky
AIP Conf. Proc. 1783, 020082 (2016)
https://doi.org/10.1063/1.4966375
The effect of laser treatment of WC-Co coatings on their failure under thermal cycling
AIP Conf. Proc. 1783, 020083 (2016)
https://doi.org/10.1063/1.4966376
Investigation of phase transitions and properties of aluminum oxides prepared by oxidation of Al/AlN nanopowder
AIP Conf. Proc. 1783, 020085 (2016)
https://doi.org/10.1063/1.4966378
The effect of the electronic subsystem on the deformation and stress localization in the surface layer of solids
AIP Conf. Proc. 1783, 020086 (2016)
https://doi.org/10.1063/1.4966379
High-temperature piezoelectric materials for elements of linear piezo motors
AIP Conf. Proc. 1783, 020087 (2016)
https://doi.org/10.1063/1.4966380
Evolution of the deformation structure for welded joints of low-carbon steel at low-cyclic fatigue
AIP Conf. Proc. 1783, 020089 (2016)
https://doi.org/10.1063/1.4966382
Radiation effects in stainless steel and TiMoN coatings at low-energy helium, krypton and xenon ion impacts
AIP Conf. Proc. 1783, 020091 (2016)
https://doi.org/10.1063/1.4966384
Mathematical model of three-layer composite synthesis during hot isostatic pressing
AIP Conf. Proc. 1783, 020092 (2016)
https://doi.org/10.1063/1.4966385
Flow of products of thermal decomposition of oil shale through porous skeleton
AIP Conf. Proc. 1783, 020093 (2016)
https://doi.org/10.1063/1.4966386
Phase composition of heat-resisting alloy modified by ageing and alloyed by rhenium
AIP Conf. Proc. 1783, 020096 (2016)
https://doi.org/10.1063/1.4966389
Peculiarities of molecular hydrogen behavior in palladium nanopores of different morphology
AIP Conf. Proc. 1783, 020101 (2016)
https://doi.org/10.1063/1.4966394
An experimental modeling and acoustic emission monitoring of abrasive wear in a steel/diabase pair
AIP Conf. Proc. 1783, 020102 (2016)
https://doi.org/10.1063/1.4966395
Towards identifying the dynamics of sliding by acoustic emission and vibration
AIP Conf. Proc. 1783, 020103 (2016)
https://doi.org/10.1063/1.4966396
Kinetic model of a nonequilibrium phase transition initiated by the volumetric heat source
AIP Conf. Proc. 1783, 020105 (2016)
https://doi.org/10.1063/1.4966398
Redistribution of filtration flows by thermogel at boundary water flooding of oil reservoirs
AIP Conf. Proc. 1783, 020106 (2016)
https://doi.org/10.1063/1.4966399
The effect of ultrasonic impact treatment on surface roughening of commercially pure titanium during tensile test
AIP Conf. Proc. 1783, 020109 (2016)
https://doi.org/10.1063/1.4966402
Deformation effect on plastic and elastic stress components in grains with different bending
AIP Conf. Proc. 1783, 020110 (2016)
https://doi.org/10.1063/1.4966403
Structural and phase transformations in 0.3C-1Cr-1Mn-1Si-Fe steel after electrolytic plasma treatment
AIP Conf. Proc. 1783, 020112 (2016)
https://doi.org/10.1063/1.4966405
Sol-forming oil-displacing system intended to enhance oil recovery from deposits with difficult-to-recover reserves
AIP Conf. Proc. 1783, 020113 (2016)
https://doi.org/10.1063/1.4966406
Lake-bottom sediment composition for the assessment of ecological state of West Siberian oil fields
AIP Conf. Proc. 1783, 020114 (2016)
https://doi.org/10.1063/1.4966407
Numerical modeling of electron-beam welding of dissimilar metals
AIP Conf. Proc. 1783, 020115 (2016)
https://doi.org/10.1063/1.4966408
Dynamic deformation behavior of materials characterized by anisotropic compressibility and auxeticity
AIP Conf. Proc. 1783, 020116 (2016)
https://doi.org/10.1063/1.4966409
Corotational derivative in modeling of deformation of anisotropic media in deformable solid mechanics
AIP Conf. Proc. 1783, 020117 (2016)
https://doi.org/10.1063/1.4966410
Modeling of elastic and plastic waves for HCP single crystals in a 3D formulation based on zinc single crystal
AIP Conf. Proc. 1783, 020118 (2016)
https://doi.org/10.1063/1.4966411
Modeling of phase evolution in coated titanium nikelide under irreversible action of electron beam
AIP Conf. Proc. 1783, 020119 (2016)
https://doi.org/10.1063/1.4966412
Plastic deformation nucleation in elastically loaded CuNi alloy during nanoindentation
AIP Conf. Proc. 1783, 020121 (2016)
https://doi.org/10.1063/1.4966414
Hydrogen accumulation and distribution in Zr1Nb zirconium alloy after electrochemical and gas-phase hydrogenation
AIP Conf. Proc. 1783, 020122 (2016)
https://doi.org/10.1063/1.4966415
Mechanisms of acoustic processing of a metal melt containing nanoparticles
AIP Conf. Proc. 1783, 020123 (2016)
https://doi.org/10.1063/1.4966416
Formation of a fine-grained microstructure in Al-Mg-Mn-Zr alloy by the conventional method
AIP Conf. Proc. 1783, 020124 (2016)
https://doi.org/10.1063/1.4966417
Analysis of the tensile behavior of high-Mn TWIP steel based on the microstructural evolution
AIP Conf. Proc. 1783, 020125 (2016)
https://doi.org/10.1063/1.4966418
Positron annihilation spectroscopy of vacancy type defects in submicrocrystalline copper under annealing
Pavel V. Kuznetsov; Andrey M. Lider; Yuriy S. Bordulev; Roman S. Laptev; Yuriy P. Mironov; Tanzilya V. Rakhmatulina; Alexandr V. Korznikov
AIP Conf. Proc. 1783, 020126 (2016)
https://doi.org/10.1063/1.4966419
Quantitative characterization of ultrafine grained 12GBA steel with scanning tunnel microscopy
AIP Conf. Proc. 1783, 020127 (2016)
https://doi.org/10.1063/1.4966420
Oxygen concentration influence on the atomic structure of the TiAl3 surface
AIP Conf. Proc. 1783, 020129 (2016)
https://doi.org/10.1063/1.4966422
Deformation of a geo-medium with considering for internal self-balancing stresses
AIP Conf. Proc. 1783, 020130 (2016)
https://doi.org/10.1063/1.4966423
Forecast of geometric characteristics of low-temperature ceramics with multilevel hierarchical pore structure
AIP Conf. Proc. 1783, 020131 (2016)
https://doi.org/10.1063/1.4966424
Heterogeneity of plastic flow of bimetals electrolytically saturated with hydrogen
AIP Conf. Proc. 1783, 020133 (2016)
https://doi.org/10.1063/1.4966426
Features of deformation localization in stable austenitic steel under thermomechanical treatment
AIP Conf. Proc. 1783, 020134 (2016)
https://doi.org/10.1063/1.4966427
Research of complex loading of polycrystals with consideration for internal structure evolution
AIP Conf. Proc. 1783, 020135 (2016)
https://doi.org/10.1063/1.4966428
Cytotoxic properties of nanostructures based on aluminum oxide and hydroxide phases
AIP Conf. Proc. 1783, 020138 (2016)
https://doi.org/10.1063/1.4966431
Acoustic parameters as the material formability criteria
AIP Conf. Proc. 1783, 020139 (2016)
https://doi.org/10.1063/1.4966432
Velocity and attenuation of ultrasound waves under cyclic loading of low-carbon steel
AIP Conf. Proc. 1783, 020140 (2016)
https://doi.org/10.1063/1.4966433
Research of structure, mechanical and operation properties of glass-metal composites
AIP Conf. Proc. 1783, 020141 (2016)
https://doi.org/10.1063/1.4966434
Shock wave loading of high-strength ceramics with components undergoing phase transitions
AIP Conf. Proc. 1783, 020143 (2016)
https://doi.org/10.1063/1.4966436
Microstructural features and microhardness of Fe-Mo-Nb-V-C low-carbon steel processed by high-pressure torsion: The significance of the initial structural state
Galina Maier; Elena Astafurova; Eugene Melnikov; Eugene Naydenkin; Alexander Smirnov; Vladimir Bataev; Sergey Dobatkin
AIP Conf. Proc. 1783, 020144 (2016)
https://doi.org/10.1063/1.4966437
Mathematical model and numerical simulation of slow deformation waves in the earth’s crust structural elements
AIP Conf. Proc. 1783, 020146 (2016)
https://doi.org/10.1063/1.4966439
Wave correlation of elementary deformation events during plastic deformation of metals
AIP Conf. Proc. 1783, 020147 (2016)
https://doi.org/10.1063/1.4966440
High-strength laser welding of aluminum-lithium scandium-doped alloys
AIP Conf. Proc. 1783, 020148 (2016)
https://doi.org/10.1063/1.4966441
Mechanical properties and structure of friction stir welds of rolled Zr-modified AA5083 alloy
AIP Conf. Proc. 1783, 020149 (2016)
https://doi.org/10.1063/1.4966442
Titanium defect structure change after gas-phase hydrogenation at different temperatures and cooling rates
AIP Conf. Proc. 1783, 020152 (2016)
https://doi.org/10.1063/1.4966445
Mechanochemical modification of natural rubber
AIP Conf. Proc. 1783, 020153 (2016)
https://doi.org/10.1063/1.4966446
Providing stability of properties of filled polymers under the joint effect of exploitation factors
AIP Conf. Proc. 1783, 020154 (2016)
https://doi.org/10.1063/1.4966447
Computer simulation of material behavior at the notch tip: Effect of microrotations on elastic energy release
AIP Conf. Proc. 1783, 020157 (2016)
https://doi.org/10.1063/1.4966450
Influence of ion nitriding regime on mechanical properties and fracture mechanism of austenitic steel subjected to different thermomechanical treatments
Valentina Moskvina; Elena Astafurova; Kamil Ramazanov; Eugene Melnikov; Galina Maier; Vladimir Budilov
AIP Conf. Proc. 1783, 020159 (2016)
https://doi.org/10.1063/1.4966452
Effect of the size of transition-metal aluminides on the structure of 1570C aluminum alloy processed by hot multidirectional isothermal forging
Oksana Mukhametdinova; Rafis Ilyasov; Dayan Nugmanov; Elena Avtokratova; Oleg Sitdikov; Michael Markushev
AIP Conf. Proc. 1783, 020160 (2016)
https://doi.org/10.1063/1.4966453
Stacking faults and microstrains in strain-hardened surface of nitrogen-alloyed austenitic steel
AIP Conf. Proc. 1783, 020161 (2016)
https://doi.org/10.1063/1.4966454
Effective diffusion coefficient of biological liquids in porous calcium phosphate coatings
AIP Conf. Proc. 1783, 020162 (2016)
https://doi.org/10.1063/1.4966455
Chemical composition and structure of the TiNi alloy surface layer formed after electron-beam melting and crystallization
Aleksei A. Neiman; Lyudmila L. Meisner; Alexander I. Lotkov; Nikolai N. Koval; Anton V. Teresov; Viktor O. Semin; Ekaterina Yu. Gudimova
AIP Conf. Proc. 1783, 020163 (2016)
https://doi.org/10.1063/1.4966456
Molecular dynamics study of slip mechanisms of nickel with amorphous-like Ni-P coating
AIP Conf. Proc. 1783, 020164 (2016)
https://doi.org/10.1063/1.4966457
Ab initio calculations for search optimization of multicomponent alloy configurations
AIP Conf. Proc. 1783, 020165 (2016)
https://doi.org/10.1063/1.4966458
On the kinetics of localized plasticity domains emergent at the pre-failure stage of deformation process
AIP Conf. Proc. 1783, 020168 (2016)
https://doi.org/10.1063/1.4966461
Transformation of slip modes of fault with spatially inhomogeneous structure
AIP Conf. Proc. 1783, 020169 (2016)
https://doi.org/10.1063/1.4966462
Metal ceramic alloy structure and surface layer modification during electron-ion-plasma irradiation of its surface
V. E. Ovcharenko; Yu. F. Ivanov; E. V. Shilko; A. A. Mokhovikov; Yu Baohai; Xiong Tianyng; Xu Yun Hua; Zhong Lisheng
AIP Conf. Proc. 1783, 020170 (2016)
https://doi.org/10.1063/1.4966464