Skip Nav Destination

Issues

Select Decade

Select Year

Issue

PRELIMINARY

Preface: Regional Conference Graz 2015 Polymer Processing Society PPS

AIP Conf. Proc. 1779, 010001 (2016) https://doi.org/10.1063/1.4965450

View articletitled, Preface: Regional Conference Graz 2015 Polymer Processing Society PPS

Open the PDF for in another window

Sponsors: Regional Conference Graz 2015 Polymer Processing Society PPS

AIP Conf. Proc. 1779, 010002 (2016) https://doi.org/10.1063/1.4965451

View articletitled, Sponsors: Regional Conference Graz 2015 Polymer Processing Society PPS

Open the PDF for in another window

INJECTION MOLDING & MOLDS

New in-line measurements for an evaluation of processing aids in the injection molding process

Tristan Koslowski; Christian Bonten

AIP Conf. Proc. 1779, 020001 (2016) https://doi.org/10.1063/1.4965452

Abstract

View articletitled, New in-line measurements for an evaluation of processing aids in the injection molding process

Open the PDF for in another window

Ejection forces in deep tubular moldings: Theoretical and experimental approach

António J. Pontes

AIP Conf. Proc. 1779, 020002 (2016) https://doi.org/10.1063/1.4965453

Abstract

View articletitled, Ejection forces in deep tubular moldings: Theoretical and experimental approach

Open the PDF for in another window

Influence of processing on the fiber length degradation in fiber reinforced plastic parts

F. Willems; C. Bonten

AIP Conf. Proc. 1779, 020003 (2016) https://doi.org/10.1063/1.4965454

Abstract

View articletitled, Influence of processing on the fiber length degradation in fiber reinforced plastic parts

Open the PDF for in another window

Experimental analysis of generation process of white tree-ring-like surface defects in injection molding

N. Masuda; H. Yokoi

AIP Conf. Proc. 1779, 020004 (2016) https://doi.org/10.1063/1.4965455

Abstract

View articletitled, Experimental analysis of generation process of white tree-ring-like surface defects in injection molding

Open the PDF for in another window

Influence of rapid heat cycle molding and filler type on warpage of injection molded parts out of PP-based compounds

Gernot A. Pacher; Gerald R. Berger; Walter Friesenbicher; Dieter P. Gruber

AIP Conf. Proc. 1779, 020005 (2016) https://doi.org/10.1063/1.4965456

Abstract

View articletitled, Influence of rapid heat cycle molding and filler type on warpage of injection molded parts out of PP-based compounds

Open the PDF for in another window

On the use of interfacial tension parameter to predict reduction of friction by mold coatings in injection molding of polyamide 6

G. R. Berger; C. Steffel; W. Friesenbichler

AIP Conf. Proc. 1779, 020006 (2016) https://doi.org/10.1063/1.4965457

Abstract

View articletitled, On the use of interfacial tension parameter to predict reduction of friction by mold coatings in injection molding of polyamide 6

Open the PDF for in another window

Determination of a robust process for a union nut. Why D-optimal DoE did not solve random impact behavior?

C. Steffel; G. R. Berger; W. Friesenbichler

AIP Conf. Proc. 1779, 020007 (2016) https://doi.org/10.1063/1.4965458

Abstract

View articletitled, Determination of a robust process for a union nut. Why D-optimal DoE did not solve random impact behavior?

Open the PDF for in another window

Process parameters affecting the bonding of in-mold decoration of injection molded components

F. Woyan; M. Bruchmüller; M. Koch

AIP Conf. Proc. 1779, 020008 (2016) https://doi.org/10.1063/1.4965459

Abstract

View articletitled, Process parameters affecting the bonding of in-mold decoration of injection molded components

Open the PDF for in another window

Filling behavior of micro-ribs on injection molded parts depending on micro-structure orientation and processing parameters

T. Lucyshyn; M. Burgsteiner; G. Graninger; C. Holzer

AIP Conf. Proc. 1779, 020009 (2016) https://doi.org/10.1063/1.4965460

Abstract

View articletitled, Filling behavior of micro-ribs on injection molded parts depending on micro-structure orientation and processing parameters

Open the PDF for in another window

Back injection molding of FR4 with heat conductive polymers

Sandra Balzereit; Volker Altstädt

AIP Conf. Proc. 1779, 020010 (2016) https://doi.org/10.1063/1.4965461

Abstract

View articletitled, Back injection molding of FR4 with heat conductive polymers

Open the PDF for in another window

Influence of flow behavior of different matrix materials on the orientation of anisotropic magnetic particles during injection molding

Torsten Maenz; Gerrit Hülder; Michael Gehde

AIP Conf. Proc. 1779, 020011 (2016) https://doi.org/10.1063/1.4965462

Abstract

View articletitled, Influence of flow behavior of different matrix materials on the orientation of anisotropic magnetic particles during injection molding

Open the PDF for in another window

Injection molding microstructured substrates from rubber-containing polymers

Marisely De Jesus Vega; Joey Mead; Carol Barry

AIP Conf. Proc. 1779, 020012 (2016) https://doi.org/10.1063/1.4965463

Abstract

View articletitled, Injection molding microstructured substrates from rubber-containing polymers

Open the PDF for in another window

Analysis of factors affecting the demolding of micro-structured devices in the injection molding process

B. Strohmayer; T. Struklec; T. Lucyshyn; C. Holzer

AIP Conf. Proc. 1779, 020013 (2016) https://doi.org/10.1063/1.4965464

Abstract

View articletitled, Analysis of factors affecting the demolding of micro-structured devices in the injection molding process

Open the PDF for in another window

Fast temperature evolution on the mold surface: Analysis and simulation

S. Liparoti; V. Speranza; R. Pantani; G. Titomanlio

AIP Conf. Proc. 1779, 020014 (2016) https://doi.org/10.1063/1.4965465

Abstract

View articletitled, Fast temperature evolution on the mold surface: Analysis and simulation

Open the PDF for in another window

Validation of precision powder injection molding process simulations using a spiral test geometry

Maximilian Marhöfer; Tobias Müller; Guido Tosello; Aminul Islam; Hans N. Hansen; Volker Piotter

AIP Conf. Proc. 1779, 020015 (2016) https://doi.org/10.1063/1.4965466

Abstract

View articletitled, Validation of precision powder injection molding process simulations using a spiral test geometry

Open the PDF for in another window

Minimisation of warpage for injection moulded parts with reversed thermal mould design

Ch. Hopmann; M. Schöngart; P. Nikoleizig

AIP Conf. Proc. 1779, 020016 (2016) https://doi.org/10.1063/1.4965467

Abstract

View articletitled, Minimisation of warpage for injection moulded parts with reversed thermal mould design

Open the PDF for in another window

Influence of molding conditions on the shrinkage and warpage behavior of standardized test specimens

Dragan Kusić; Aleš Hančič

AIP Conf. Proc. 1779, 020017 (2016) https://doi.org/10.1063/1.4965468

Abstract

View articletitled, Influence of molding conditions on the shrinkage and warpage behavior of standardized test specimens

Open the PDF for in another window

Molecular coating of molds and dies for polymer processing

Baris Kaynak; Stefan Waschke; Guido Grundmeier; Wolfgang Kern

AIP Conf. Proc. 1779, 020018 (2016) https://doi.org/10.1063/1.4965469

Abstract

View articletitled, Molecular coating of molds and dies for polymer processing

Open the PDF for in another window

On the optimisation of mechanical properties of PP moulded parts

Marton Huszar; Fawzi Belblidia; Patrick Wlodarski; Cris Arnold; Johann Sienz; David Bould

AIP Conf. Proc. 1779, 020019 (2016) https://doi.org/10.1063/1.4965470

Abstract

View articletitled, On the optimisation of mechanical properties of PP moulded parts

Open the PDF for in another window

EXTRUSION & COMPOUNDING

New extrusion process for manufacturing radial functionally graded polymer materials

C. Hoffmann; J. Rudloff; M. Lang; T. Hochrein; K. Kretschmer; P. Heidemeyer; M. Bastian

AIP Conf. Proc. 1779, 030001 (2016) https://doi.org/10.1063/1.4965471

Abstract

View articletitled, New extrusion process for manufacturing radial functionally graded polymer materials

Open the PDF for in another window

Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

Schuschnigg Stephan; Battisti Markus; Winkler-Ebner Joachim; Friesenbichler Walter; Holzer Clemens

AIP Conf. Proc. 1779, 030002 (2016) https://doi.org/10.1063/1.4965472

Abstract

View articletitled, Optimization of twin screw extrusion using CFD for polymer/nanoclay composites

Open the PDF for in another window

Extruded zeolitic honeycombs for sorptive heat storage

B. Formisano; C. Bonten

AIP Conf. Proc. 1779, 030003 (2016) https://doi.org/10.1063/1.4965473

Abstract

View articletitled, Extruded zeolitic honeycombs for sorptive heat storage

Open the PDF for in another window

Influence of a grooved melting zone on high-speed single screw extrusion

O. Kast; C. Bonten

AIP Conf. Proc. 1779, 030004 (2016) https://doi.org/10.1063/1.4965474

Abstract

View articletitled, Influence of a grooved melting zone on high-speed single screw extrusion

Open the PDF for in another window

Temperature induced dimensional variation in extrusion

Gregor Hiesgen; Kenny Saul; Chris Rauwendaal

AIP Conf. Proc. 1779, 030005 (2016) https://doi.org/10.1063/1.4965475

Abstract

View articletitled, Temperature induced dimensional variation in extrusion

Open the PDF for in another window

Automated design and optimization of cooling lines for extrusion using chillWARE cooling simulation

Kenny Saul; Gregor Hiesgen; Manuel Moellenbeck; Chris Rauwendaal

AIP Conf. Proc. 1779, 030006 (2016) https://doi.org/10.1063/1.4965476

Abstract

View articletitled, Automated design and optimization of cooling lines for extrusion using chillWARE cooling simulation

Open the PDF for in another window

Effects of fiber orientation on the electrical conductivity of filled plastic melt

S. Schneidmadel; M. Koch; M. Bruchmüller

AIP Conf. Proc. 1779, 030007 (2016) https://doi.org/10.1063/1.4965477

Abstract

View articletitled, Effects of fiber orientation on the electrical conductivity of filled plastic melt

Open the PDF for in another window

Viscosity of color masterbatches and its influence on WPC production

Sven Wolf

AIP Conf. Proc. 1779, 030008 (2016) https://doi.org/10.1063/1.4965478

Abstract

View articletitled, Viscosity of color masterbatches and its influence on WPC production

Open the PDF for in another window

Optimized profile extrusion processes for biopolymer blends

K. Moser; A. Holzer; B. Bergmann; J. Diemert

AIP Conf. Proc. 1779, 030009 (2016) https://doi.org/10.1063/1.4965479

Abstract

View articletitled, Optimized profile extrusion processes for biopolymer blends

Open the PDF for in another window

Compounding and rheometry of PLA nanocomposites with coated and uncoated hydroxyapatite nanoplatelets

Magdalena M. Tomczynska; Gabriel Y. H. Choong; Davide S. A. De Focatiis; David M. Grant; Andrew J. Parsons

AIP Conf. Proc. 1779, 030010 (2016) https://doi.org/10.1063/1.4965480

Abstract

View articletitled, Compounding and rheometry of PLA nanocomposites with coated and uncoated hydroxyapatite nanoplatelets

Open the PDF for in another window

Energy balance analysis of the feed zone of grooved barrel single screw extruders

M. Düngen; S. Hartung; M. Koch

AIP Conf. Proc. 1779, 030011 (2016) https://doi.org/10.1063/1.4965481

Abstract

View articletitled, Energy balance analysis of the feed zone of grooved barrel single screw extruders

Open the PDF for in another window

Advantages and potentials of a blown film cooling system with a complete housing of the tube formation zone

M. Andretzky; M. Janas; B. Neubert; F. Kracht; O. Ludwig; J. Mellentin; J. Wortberg

AIP Conf. Proc. 1779, 030012 (2016) https://doi.org/10.1063/1.4965482

Abstract

View articletitled, Advantages and potentials of a blown film cooling system with a complete housing of the tube formation zone

Open the PDF for in another window

Evaluation of the melting behavior and the melt penetration into the solid bed using a model experiment

C. Kneidinger; G. Zitzenbacher; M. Laengauer; J. Miethlinger; G. Steinbichler

AIP Conf. Proc. 1779, 030013 (2016) https://doi.org/10.1063/1.4965483

Abstract

View articletitled, Evaluation of the melting behavior and the melt penetration into the solid bed using a model experiment

Open the PDF for in another window

Heat transfer in twin screw compounding extruders

Chris Rauwendaal

AIP Conf. Proc. 1779, 030014 (2016) https://doi.org/10.1063/1.4965484

Abstract

View articletitled, Heat transfer in twin screw compounding extruders

Open the PDF for in another window

Polymer compounds with high thermal conductivity

M. Grundler; T. Derieth; A. Heinzel

AIP Conf. Proc. 1779, 030015 (2016) https://doi.org/10.1063/1.4965485

Abstract

View articletitled, Polymer compounds with high thermal conductivity

Open the PDF for in another window

Microstructuring polycarbonate films by variothermal extrusion embossing

Christian Hopmann; Christian Windeck; Florian Petzinka

AIP Conf. Proc. 1779, 030016 (2016) https://doi.org/10.1063/1.4965486

Abstract

View articletitled, Microstructuring polycarbonate films by variothermal extrusion embossing

Open the PDF for in another window

Development of a polymer composite with high electrical conductivity and improved impact strength for the application as bipolar plate

Ch. Hopmann; Ch. Windeck; A. Cohnen; J. Onken; B. Krause; P. Pötschke; Th. Hickmann

AIP Conf. Proc. 1779, 030017 (2016) https://doi.org/10.1063/1.4965487

Abstract

View articletitled, Development of a polymer composite with high electrical conductivity and improved impact strength for the application as bipolar plate

Open the PDF for in another window

Fiber length shortening and fluorescence spectroscopy as characterization method for distributive and dispersive mixing in a co-rotating twin screw extruder

A. Lepschi; I. Burzic; L. Sobczak; J. Miethlinger

AIP Conf. Proc. 1779, 030018 (2016) https://doi.org/10.1063/1.4965488

Abstract

View articletitled, Fiber length shortening and fluorescence spectroscopy as characterization method for distributive and dispersive mixing in a co-rotating twin screw extruder

Open the PDF for in another window

Effect of calcium carbonate particle size and content on polyamide 6 processing and properties

Baltus Cornelius Bonse; Lucian Mendes Molina

AIP Conf. Proc. 1779, 030019 (2016) https://doi.org/10.1063/1.4965489

Abstract

View articletitled, Effect of calcium carbonate particle size and content on polyamide 6 processing and properties

Open the PDF for in another window

Development of natural fiber/engineering plastics composites with flame retardance properties

Ahmed El-Sabbagh; Leif Steuernagel; Jochen Ring; Oliver Toepfer

AIP Conf. Proc. 1779, 030020 (2016) https://doi.org/10.1063/1.4965490

Abstract

View articletitled, Development of natural fiber/engineering plastics composites with flame retardance properties

Open the PDF for in another window

Effective troubleshooting of extrusion problems

Chris Rauwendaal

AIP Conf. Proc. 1779, 030021 (2016) https://doi.org/10.1063/1.4965491

Abstract

View articletitled, Effective troubleshooting of extrusion problems

Open the PDF for in another window

NANOCOMPOSITE MATERIALS & PROCESSING

Functionalization of carbon nanofiber and its effect on tensile properties of PA11 matrix composite reinforced with carbon nanofiber

Y. Takahashi; Y. Suzumoto; K. Enomoto

AIP Conf. Proc. 1779, 040001 (2016) https://doi.org/10.1063/1.4965492

Abstract

View articletitled, Functionalization of carbon nanofiber and its effect on tensile properties of PA11 matrix composite reinforced with carbon nanofiber

Open the PDF for in another window

Fabrication of micro-structured surface of plants-derived polyamide using femtosecond laser and their frictional properties

Keisuke Nakamura; Noritada Naruse; Yosuke Nishitani; Takeshi Kitano

AIP Conf. Proc. 1779, 040002 (2016) https://doi.org/10.1063/1.4965493

Abstract

View articletitled, Fabrication of micro-structured surface of plants-derived polyamide using femtosecond laser and their frictional properties

Open the PDF for in another window

Electrical and thermal conductivity of polypropylene filled with combinations of carbon fillers

Beate Krause; Petra Pötschke

AIP Conf. Proc. 1779, 040003 (2016) https://doi.org/10.1063/1.4965494

Abstract

View articletitled, Electrical and thermal conductivity of polypropylene filled with combinations of carbon fillers

Open the PDF for in another window

Sulfonated poly(ether imide)/aluminium nanocomposites for hydrogen storage

Cesar A. G. Beatrice; Amanda D. Oliveira; Fabio R. Passador; Luiz A. Pessan

AIP Conf. Proc. 1779, 040004 (2016) https://doi.org/10.1063/1.4965495

Abstract

View articletitled, Sulfonated poly(ether imide)/aluminium nanocomposites for hydrogen storage

Open the PDF for in another window

A study on material optimization for polypropylene nanocomposites based on layered silicates using elongational flow devices

W. Friesenbichler; M. G. Battisti; A. Neunhäuserer

AIP Conf. Proc. 1779, 040005 (2016) https://doi.org/10.1063/1.4965496

Abstract

View articletitled, A study on material optimization for polypropylene nanocomposites based on layered silicates using elongational flow devices

Open the PDF for in another window

Polyetherimide-based nanocomposites materials for hydrogen storage

A. D. Oliveira; C. A. G. Beatrice; F. R. Passador; L. A. Pessan

AIP Conf. Proc. 1779, 040006 (2016) https://doi.org/10.1063/1.4965497

Abstract

View articletitled, Polyetherimide-based nanocomposites materials for hydrogen storage

Open the PDF for in another window

Influence of blending protocol on the thermal and electrical properties of HDPE/LLDPE/CNT nanocomposites

C. M. Santos; T. L. A. Montanheiro; E. H. Backes; F. R. Passador

AIP Conf. Proc. 1779, 040007 (2016) https://doi.org/10.1063/1.4965498

Abstract

View articletitled, Influence of blending protocol on the thermal and electrical properties of HDPE/LLDPE/CNT nanocomposites

Open the PDF for in another window

Processing and antimicrobial efficacy of polypropylene/montmorillonite/silver nanocomposites as food packaging films

Washington Luiz Oliani; Luiz Gustavo Hiroki Komatsu; Nilton Lincopan; Vijaya Kumar Rangari; Ademar Benevolo Lugao; Duclerc Fernandes Parra

AIP Conf. Proc. 1779, 040008 (2016) https://doi.org/10.1063/1.4965499

Abstract

View articletitled, Processing and antimicrobial efficacy of polypropylene/montmorillonite/silver nanocomposites as food packaging films

Open the PDF for in another window

Preparation and characterization of the modified PEEK/CNTs-nanocomposites

Soheil Samie; Atefeh Nejati; Mohammad Reza Avazfard; Samaneh Amini

AIP Conf. Proc. 1779, 040009 (2016) https://doi.org/10.1063/1.4965500

Abstract

View articletitled, Preparation and characterization of the modified PEEK/CNTs-nanocomposites

Open the PDF for in another window

Preparation and modification of polystyrene/clay nanocomposite using ethylene octene copolymer and SBS block copolymer

Soheil Samie; Helen Abdolahifar; Nooredin Goudarzian

AIP Conf. Proc. 1779, 040010 (2016) https://doi.org/10.1063/1.4965501

Abstract

View articletitled, Preparation and modification of polystyrene/clay nanocomposite using ethylene octene copolymer and SBS block copolymer

Open the PDF for in another window

Thermal conductivity and rheological measurements on hybrid polypropylene-based systems

A. Patti; S. Acierno; D. Acierno; P. Russo

AIP Conf. Proc. 1779, 040011 (2016) https://doi.org/10.1063/1.4965502

Abstract

View articletitled, Thermal conductivity and rheological measurements on hybrid polypropylene-based systems

Open the PDF for in another window

A strong and sticky hydrogel electrolyte for flexible supercapacitors

Haojie Fei; Nabanita Saha; Natalia Kazantseva; Gengchao Wang; Hua Bao; Petr Saha

AIP Conf. Proc. 1779, 040012 (2016) https://doi.org/10.1063/1.4965503

Abstract

View articletitled, A strong and sticky hydrogel electrolyte for flexible supercapacitors

Open the PDF for in another window

Effect of polymer matrix on rheological and electrical percolation threshold of MWCNTs

João Paulo Ferreira Santos; Rosario Elida Suman Bretas

AIP Conf. Proc. 1779, 040013 (2016) https://doi.org/10.1063/1.4965504

Abstract

View articletitled, Effect of polymer matrix on rheological and electrical percolation threshold of MWCNTs

Open the PDF for in another window

Active polymer nanocomposites: Application in thermoplastic polymers

Marco Scatto; Michele Sisani

AIP Conf. Proc. 1779, 040014 (2016) https://doi.org/10.1063/1.4965505

Abstract

View articletitled, Active polymer nanocomposites: Application in thermoplastic polymers

Open the PDF for in another window

MODELING & SIMULATION

Three-dimensional characterization of dispersive mixing in single screw extruders

Thomas Erb; Oguz Celik; Christian Bonten

AIP Conf. Proc. 1779, 050001 (2016) https://doi.org/10.1063/1.4965506

Abstract

View articletitled, Three-dimensional characterization of dispersive mixing in single screw extruders

Open the PDF for in another window

Material characterization for thermoforming-simulation

K. Landsecker; C. Bonten

AIP Conf. Proc. 1779, 050002 (2016) https://doi.org/10.1063/1.4965507

Abstract

View articletitled, Material characterization for thermoforming-simulation

Open the PDF for in another window

Multimode mesoscopic rheological model for polymer melts and flow in a plane-parallel channel with a sudden convergence

Pyshnograi Grigori; Pyshnograi Ivan; Koshelev Konstantin; Merzlikina Darina; Tolstykh Mikhail

AIP Conf. Proc. 1779, 050003 (2016) https://doi.org/10.1063/1.4965508

Abstract

View articletitled, Multimode mesoscopic rheological model for polymer melts and flow in a plane-parallel channel with a sudden convergence

Open the PDF for in another window

Three-dimensional simulation of a single-screw extruder’s grooved feed section

O. Celik; C. Bonten

AIP Conf. Proc. 1779, 050004 (2016) https://doi.org/10.1063/1.4965509

Abstract

View articletitled, Three-dimensional simulation of a single-screw extruder’s grooved feed section

Open the PDF for in another window

Melting rate of a single screw extruder with a grooved melting zone

J. A. Avila-Alfaro; C. Bonten

AIP Conf. Proc. 1779, 050005 (2016) https://doi.org/10.1063/1.4965510

Abstract

View articletitled, Melting rate of a single screw extruder with a grooved melting zone

Open the PDF for in another window

Effects of geometry variations on the mixing ability of a shear-mixing-type screw head

Klaus Straka; Georg Steinbichler

AIP Conf. Proc. 1779, 050006 (2016) https://doi.org/10.1063/1.4965511

Abstract

View articletitled, Effects of geometry variations on the mixing ability of a shear-mixing-type screw head

Open the PDF for in another window

Characteristics of the mold filling simulation for a variothermal injection molding process with highly filled thermoplastics

A. Birkholz; J. Wortberg

AIP Conf. Proc. 1779, 050007 (2016) https://doi.org/10.1063/1.4965512

Abstract

View articletitled, Characteristics of the mold filling simulation for a variothermal injection molding process with highly filled thermoplastics

Open the PDF for in another window

Dynamic material characterization using 4a impetus

Peter Reithofer; Artur Fertschej

AIP Conf. Proc. 1779, 050008 (2016) https://doi.org/10.1063/1.4965513

Abstract

View articletitled, Dynamic material characterization using 4a impetus

Open the PDF for in another window

Failure models for thermoplastics in LSDYNA

Peter Reithofer; Artur Fertschej

AIP Conf. Proc. 1779, 050009 (2016) https://doi.org/10.1063/1.4965514

Abstract

View articletitled, Failure models for thermoplastics in LSDYNA

Open the PDF for in another window

Dissipative particle dynamics simulations of orientation of layered silicate particles embedded in polymer melts under shear flows

Ali Gooneie; Stephan Schuschnigg; Clemens Holzer

AIP Conf. Proc. 1779, 050010 (2016) https://doi.org/10.1063/1.4965515

Abstract

View articletitled, Dissipative particle dynamics simulations of orientation of layered silicate particles embedded in polymer melts under shear flows

Open the PDF for in another window

Oil diffusion properties of acoustic foams for oil contaminated water treatment

P. Cherukupally; R. K. M. Chu; A. Bilton; C. B. Park

AIP Conf. Proc. 1779, 050011 (2016) https://doi.org/10.1063/1.4965516

Abstract

View articletitled, Oil diffusion properties of acoustic foams for oil contaminated water treatment

Open the PDF for in another window

Concept of fatigue design methodology for short fibre reinforced polymers considering environmental conditions

Primetzhofer A.; Mösenbacher A.; T. Haslinger; G. Pinter

AIP Conf. Proc. 1779, 050012 (2016) https://doi.org/10.1063/1.4965517

Abstract

View articletitled, Concept of fatigue design methodology for short fibre reinforced polymers considering environmental conditions

Open the PDF for in another window

Investigation of the influencing factors on the process-dependent elasticity modulus in extrusion blow molded plastic containers for material modelling in the finite element simulation

D. Grommes; O. Bruch; J. Geilen

AIP Conf. Proc. 1779, 050013 (2016) https://doi.org/10.1063/1.4965518

Abstract

View articletitled, Investigation of the influencing factors on the process-dependent elasticity modulus in extrusion blow molded plastic containers for material modelling in the finite element simulation

Open the PDF for in another window

Examination of the weld line strength of stagnating and flowing weld lines in unreinforced thermoplastics

Ch. Hopmann; M. Schöngart; J. Onken; J. Chen

AIP Conf. Proc. 1779, 050014 (2016) https://doi.org/10.1063/1.4965519

Abstract

View articletitled, Examination of the weld line strength of stagnating and flowing weld lines in unreinforced thermoplastics

Open the PDF for in another window

Estimation of the lifetime of short fiber-reinforced plastic parts in steering systems

F. Ferrano; A. Lipka; M. Stanko; M. Stommel

AIP Conf. Proc. 1779, 050015 (2016) https://doi.org/10.1063/1.4965520

Abstract

View articletitled, Estimation of the lifetime of short fiber-reinforced plastic parts in steering systems

Open the PDF for in another window

Analysis for microstructure of micro-cantilevers arrays in micro-injection molding by using numerical simulations

Reza Gheisari; Paulo Jorge Bártolo; Nicholas Goddard

AIP Conf. Proc. 1779, 050016 (2016) https://doi.org/10.1063/1.4965521

Abstract

View articletitled, Analysis for microstructure of micro-cantilevers arrays in micro-injection molding by using numerical simulations

Open the PDF for in another window

NATURAL BASED & BIODEGRADABLE POLYMERS

Modified standard polylactic acid (PLA) for extrusion foaming

S. Göttermann; S. Weinmann; C. Bonten; T. Standau; V. Altstädt

AIP Conf. Proc. 1779, 060001 (2016) https://doi.org/10.1063/1.4965522

Abstract

View articletitled, Modified standard polylactic acid (PLA) for extrusion foaming

Open the PDF for in another window

Crystallization behavior of polyhydroxybutyrate (PHB)

Linda Goebel; Christian Bonten

AIP Conf. Proc. 1779, 060002 (2016) https://doi.org/10.1063/1.4965523

Abstract

View articletitled, Crystallization behavior of polyhydroxybutyrate (PHB)

Open the PDF for in another window

Lignin as renewable raw material for applications in electronics

Simone Patermann; Volker Altstädt

AIP Conf. Proc. 1779, 060003 (2016) https://doi.org/10.1063/1.4965524

Abstract

View articletitled, Lignin as renewable raw material for applications in electronics

Open the PDF for in another window

Effect of processing sequence on the dynamic viscoelastic properties of ternary biomass composites (Hemp fiber/PA1010/PA11E) in the molten state

Yosuke Nishitani; Jun Mukaida; Toshiyuki Yamanaka; Tetsuto Kajiyama; Takeshi Kitano

AIP Conf. Proc. 1779, 060004 (2016) https://doi.org/10.1063/1.4965525

Abstract

View articletitled, Effect of processing sequence on the dynamic viscoelastic properties of ternary biomass composites (Hemp fiber/PA1010/PA11E) in the molten state

Open the PDF for in another window

Influence of types of alkali treatment on the mechanical properties of hemp fiber reinforced polyamide 1010 composites

Jun Mukaida; Yosuke Nishitani; Toshiyuki Yamanaka; Tetsuto Kajiyama; Takeshi Kitano

AIP Conf. Proc. 1779, 060005 (2016) https://doi.org/10.1063/1.4965526

Abstract

View articletitled, Influence of types of alkali treatment on the mechanical properties of hemp fiber reinforced polyamide 1010 composites

Open the PDF for in another window

Optimization of PLA compounds using novel nucleating agents and plasticizers

K. Moser; M. Schmitt; A. Holzer; B. Bergmann; J. Diemert; P. Elsner

AIP Conf. Proc. 1779, 060006 (2016) https://doi.org/10.1063/1.4965527

Abstract

View articletitled, Optimization of PLA compounds using novel nucleating agents and plasticizers

Open the PDF for in another window

Rotational moulding of poly-lactic acid

Antonio Greco; Alfonso Maffezzoli

AIP Conf. Proc. 1779, 060007 (2016) https://doi.org/10.1063/1.4965528

Abstract

View articletitled, Rotational moulding of poly-lactic acid

Open the PDF for in another window

Crystallization of PHB/Carbon black compounds. Effect of heating and cooling cycles

R. M. R. Wellen; E. L. Canedo; M. S. Rabello

AIP Conf. Proc. 1779, 060008 (2016) https://doi.org/10.1063/1.4965529

Abstract

View articletitled, Crystallization of PHB/Carbon black compounds. Effect of heating and cooling cycles

Open the PDF for in another window

Kinetic analysis of crystallization in PHB/Carbon black compounds. Mo model

R. M. R. Wellen; E. L. Canedo

AIP Conf. Proc. 1779, 060009 (2016) https://doi.org/10.1063/1.4965530

Abstract

View articletitled, Kinetic analysis of crystallization in PHB/Carbon black compounds. Mo model

Open the PDF for in another window

Flowability and fiber content homogeneity of natural fiber polypropylene composites in injection molding

Ahmed El-Sabbagh; Amna Ramzy; Leif Steuernagel; Dieter Meiners

AIP Conf. Proc. 1779, 060010 (2016) https://doi.org/10.1063/1.4965531

Abstract

View articletitled, Flowability and fiber content homogeneity of natural fiber polypropylene composites in injection molding

Open the PDF for in another window

Preparation of bioplastic copolymer as surface modifier on NR latex particles

Watit Wongphonchai; Rathanawan Magaraphan

AIP Conf. Proc. 1779, 060011 (2016) https://doi.org/10.1063/1.4965532

Abstract

View articletitled, Preparation of bioplastic copolymer as surface modifier on NR latex particles

Open the PDF for in another window

RHEOLOGY & ADVANCED CHARACTERIZATION

Studies on tribological behavior of PEEK and PE-UHMW

Marcela Petrica; Bernadette Duscher; Thomas Koch; Vasiliki-Maria Archodoulaki

AIP Conf. Proc. 1779, 070001 (2016) https://doi.org/10.1063/1.4965533

Abstract

View articletitled, Studies on tribological behavior of PEEK and PE-UHMW

Open the PDF for in another window

Modeling the viscosity development of epoxy resins during injection of the RTM process

Stefan Caba; Michael Koch

AIP Conf. Proc. 1779, 070002 (2016) https://doi.org/10.1063/1.4965534

Abstract

View articletitled, Modeling the viscosity development of epoxy resins during injection of the RTM process

Open the PDF for in another window

Shrinkage in relation to the TTT-Features of an epoxy adhesive

A. Hohn; M. Schumann; L. Goetz; P. L. Geiss

AIP Conf. Proc. 1779, 070003 (2016) https://doi.org/10.1063/1.4965535

Abstract

View articletitled, Shrinkage in relation to the TTT-Features of an epoxy adhesive

Open the PDF for in another window

Media influence on the fracture mechanical behavior of polyamide

J. Heyn; C. Bonten

AIP Conf. Proc. 1779, 070004 (2016) https://doi.org/10.1063/1.4965536

Abstract

View articletitled, Media influence on the fracture mechanical behavior of polyamide

Open the PDF for in another window

Change of processing behavior of rubbers in injection molding caused by material storage

M. Fasching; W. Friesenbichler; G. R. Berger

AIP Conf. Proc. 1779, 070005 (2016) https://doi.org/10.1063/1.4965537

Abstract

View articletitled, Change of processing behavior of rubbers in injection molding caused by material storage

Open the PDF for in another window

Controlled shear stress method to measure yield stress of highly filled polymer melts

Christian Kukla; Ivica Duretek; Clemens Holzer

AIP Conf. Proc. 1779, 070006 (2016) https://doi.org/10.1063/1.4965538

Abstract

View articletitled, Controlled shear stress method to measure yield stress of highly filled polymer melts

Open the PDF for in another window

Chemical changes in polyetherimide (PEI) joined by friction-based injection clinching joining (F-ICJ) technique

M. Sônego; A. B. Abibe; J. F. dos Santos; L. B. Canto; S. T. Amancio-Filho

AIP Conf. Proc. 1779, 070007 (2016) https://doi.org/10.1063/1.4965539

Abstract

View articletitled, Chemical changes in polyetherimide (PEI) joined by friction-based injection clinching joining (F-ICJ) technique

Open the PDF for in another window

Dynamic mechanical profile of polyketone compared to conventional technical plastics

Gerald Pilz; Peter Guttmann

AIP Conf. Proc. 1779, 070008 (2016) https://doi.org/10.1063/1.4965540

Abstract

View articletitled, Dynamic mechanical profile of polyketone compared to conventional technical plastics

Open the PDF for in another window

Development and implementation of an accelerated method for chlorine dioxide exposure

Márton Bredács; Anita Redhead; Andreas Frank; Amaia Bastero; Gerald Pinter

AIP Conf. Proc. 1779, 070009 (2016) https://doi.org/10.1063/1.4965541

Abstract

View articletitled, Development and implementation of an accelerated method for chlorine dioxide exposure

Open the PDF for in another window

Mechanical properties of polyamide 12 after exposed to biodiesel

Roberto A. Nascimento; Adriana M. Catelli de Souza

AIP Conf. Proc. 1779, 070010 (2016) https://doi.org/10.1063/1.4965542

Abstract

View articletitled, Mechanical properties of polyamide 12 after exposed to biodiesel

Open the PDF for in another window

On estimating the zero-shear-rate viscosity: Tests with PIB and PDMS

Montgomery T. Shaw

AIP Conf. Proc. 1779, 070011 (2016) https://doi.org/10.1063/1.4965543

Abstract

View articletitled, On estimating the zero-shear-rate viscosity: Tests with PIB and PDMS

Open the PDF for in another window

Effect of salt concentration and temperature on the rheological properties of guar gum-dead sea salt gel

Oyunchimeg Zandraa; Nabanita Saha; Tomas Saha; Takeshi Kitano; Petr Sáha

AIP Conf. Proc. 1779, 070012 (2016) https://doi.org/10.1063/1.4965544

Abstract

View articletitled, Effect of salt concentration and temperature on the rheological properties of guar gum-dead sea salt gel

Open the PDF for in another window

BLENDS, REACTIVE SYSTEMS & ELASTOMERS

Dispersion control of immiscible polymer blend using selective heating by infrared laser irradiation: Numerical study

Duc Hong Doan; Takushi Saito; Tatsuya Kawaguchi; Isao Satoh

AIP Conf. Proc. 1779, 080001 (2016) https://doi.org/10.1063/1.4965545

Abstract

View articletitled, Dispersion control of immiscible polymer blend using selective heating by infrared laser irradiation: Numerical study

Open the PDF for in another window

Toughening of polylactic acid by blending with thermoplastic elastomer

J. Ishihara; M. Harada; K. Nakano; K. Enomoto

AIP Conf. Proc. 1779, 080002 (2016) https://doi.org/10.1063/1.4965546

Abstract

View articletitled, Toughening of polylactic acid by blending with thermoplastic elastomer

Open the PDF for in another window

PA6-block copolymers and their potential as impact modifier in PA6

J. Benz; M. Poindl; C. Bonten

AIP Conf. Proc. 1779, 080003 (2016) https://doi.org/10.1063/1.4965547

Abstract

View articletitled, PA6-block copolymers and their potential as impact modifier in PA6

Open the PDF for in another window

UV-induced modulation of tribological characteristics: Elastomeric materials featuring controlled anisotropic friction properties

Jakob Manhart; Andreas Hausberger; Inge Mühlbacher; Raimund Schaller; Armin Holzner; Wolfgang Kern; Sandra Schlögl

AIP Conf. Proc. 1779, 080004 (2016) https://doi.org/10.1063/1.4965548

Abstract

View articletitled, UV-induced modulation of tribological characteristics: Elastomeric materials featuring controlled anisotropic friction properties

Open the PDF for in another window

Hybrid-matrix approach: How to overcome the conflict of matrix selection?

J. Krollmann; R. Snajdr; M. Paz; S. Zaremba; K. Drechser

AIP Conf. Proc. 1779, 080005 (2016) https://doi.org/10.1063/1.4965549

Abstract

View articletitled, Hybrid-matrix approach: How to overcome the conflict of matrix selection?

Open the PDF for in another window

Crosslinked polymers by using modified layered silicates

Riess Gisbert; Schauberger Jörg; Mattausch Hannelore; Holzer Clemens

AIP Conf. Proc. 1779, 080006 (2016) https://doi.org/10.1063/1.4965550

Abstract

View articletitled, Crosslinked polymers by using modified layered silicates

Open the PDF for in another window

Flexible epoxy based composites with enhanced delamination resistance

Sandra Schlögl; Dietmar Lenko; Sabine Bichler; Gerhard Lemesch; Franz Ramsauer; Werner Ladstätter; Wolfgang Kern

AIP Conf. Proc. 1779, 080007 (2016) https://doi.org/10.1063/1.4965551

Abstract

View articletitled, Flexible epoxy based composites with enhanced delamination resistance

Open the PDF for in another window

Structure development in co-continuous polymer blends filled with carbon black during annealing

Zdeněk Starý

AIP Conf. Proc. 1779, 080008 (2016) https://doi.org/10.1063/1.4965552

Abstract

View articletitled, Structure development in co-continuous polymer blends filled with carbon black during annealing

Open the PDF for in another window

Survey of the crack growth approach for the fatigue life estimation of application-relevant rubbers

Sandra Seichter; Vassiliki-Maria Archodoulaki; Thomas Koch; Wolfgang Fidi; Armin Holzner; Stefan Robin

AIP Conf. Proc. 1779, 080009 (2016) https://doi.org/10.1063/1.4965553

Abstract

View articletitled, Survey of the crack growth approach for the fatigue life estimation of application-relevant rubbers

Open the PDF for in another window

Preparation and characterization of conductive HDPE/LLDPE/Polyaniline blends

L. B. Oliveira; C. Z. Graeff; P. V. Faria; E. H. Backes; F. H. Cristovan; F. R. Passador

AIP Conf. Proc. 1779, 080010 (2016) https://doi.org/10.1063/1.4965554

Abstract

View articletitled, Preparation and characterization of conductive HDPE/LLDPE/Polyaniline blends

Open the PDF for in another window

Mechanical behavior of epoxy systems using microencapsulated amino-functional siloxanes

Wanessa R. Knop; Marcia M. Meier; Sérgio H. Pezzin

AIP Conf. Proc. 1779, 080011 (2016) https://doi.org/10.1063/1.4965555

Abstract

View articletitled, Mechanical behavior of epoxy systems using microencapsulated amino-functional siloxanes

Open the PDF for in another window

Influence of morphology and compatibilizer on burning behavior of PET/HDPE blend

K. Dobrovszky; F. Ronkay

AIP Conf. Proc. 1779, 080012 (2016) https://doi.org/10.1063/1.4965556

Abstract

View articletitled, Influence of morphology and compatibilizer on burning behavior of PET/HDPE blend

Open the PDF for in another window

Influence of the injection molding process on the morphology of thermoplastic vulcanizates

Ch. Hopmann; P. Bruns; M. Schöngart

AIP Conf. Proc. 1779, 080013 (2016) https://doi.org/10.1063/1.4965557

Abstract

View articletitled, Influence of the injection molding process on the morphology of thermoplastic vulcanizates

Open the PDF for in another window

Effect of the carbonyl iron particles on damping properties of magnetorheological elastomers based on natural rubber

Fatemeh Seidabdi; Milad Mehranpour; Abdolreza Ohadi

AIP Conf. Proc. 1779, 080014 (2016) https://doi.org/10.1063/1.4965558

Abstract

View articletitled, Effect of the carbonyl iron particles on damping properties of magnetorheological elastomers based on natural rubber

Open the PDF for in another window

Influence of gamma radiation on EPDM compounds properties for use in nuclear plants

Sandra Regina Scagliusi; Elisabeth Carvalho Leite Cardoso; Traian Zaharescu; Ademar Benévolo Lugão

AIP Conf. Proc. 1779, 080015 (2016) https://doi.org/10.1063/1.4965559

Abstract

View articletitled, Influence of gamma radiation on EPDM compounds properties for use in nuclear plants

Open the PDF for in another window

FOAMS & LIGHTWEIGHT STRUCTURES

Functionalized lightweight parts: Application of LCM for the integration of automotive sensors in CFRP structures

Linda Klein; Peter Middendorf

AIP Conf. Proc. 1779, 090001 (2016) https://doi.org/10.1063/1.4965560

Abstract

View articletitled, Functionalized lightweight parts: Application of LCM for the integration of automotive sensors in CFRP structures

Open the PDF for in another window

In-situ-pultrusion – bonding of FRP-parts to PA6

S. Epple; C. Bonten

AIP Conf. Proc. 1779, 090002 (2016) https://doi.org/10.1063/1.4965561

Abstract

View articletitled, In-situ-pultrusion – bonding of FRP-parts to PA6

Open the PDF for in another window

Interlaminar fracture toughness of carbon fiber reinforced thermoplastic in-situ joints

V. Radlmaier; G. Obermeier; S. Ehard; A. Kollmannsberger; H. Koerber; E. Ladstaetter

AIP Conf. Proc. 1779, 090003 (2016) https://doi.org/10.1063/1.4965562

Abstract

View articletitled, Interlaminar fracture toughness of carbon fiber reinforced thermoplastic in-situ joints

Open the PDF for in another window

Crack growth monitoring at CFRP adhesive bondings

W. Adebahr; R. Sachse; P. Middendorf; M. Kreutzbruck

AIP Conf. Proc. 1779, 090004 (2016) https://doi.org/10.1063/1.4965563

Abstract

View articletitled, Crack growth monitoring at CFRP adhesive bondings

Open the PDF for in another window

Influence of the heating process on the mechanical properties of continuous reinforced thermoplastics

A. Geyer; T. Koslowski; C. Bonten

AIP Conf. Proc. 1779, 090005 (2016) https://doi.org/10.1063/1.4965564

Abstract

View articletitled, Influence of the heating process on the mechanical properties of continuous reinforced thermoplastics

Open the PDF for in another window

Visualization analysis of large elongated cells formation process at the boundary area between foamed and non-foamed layers in microcellular injection molding

T. Yamada; H. Yokoi

AIP Conf. Proc. 1779, 090006 (2016) https://doi.org/10.1063/1.4965565

Abstract

View articletitled, Visualization analysis of large elongated cells formation process at the boundary area between foamed and non-foamed layers in microcellular injection molding

Open the PDF for in another window

Dynamic mechanical response of foams for noise control

Francesco Briatico-Vangosa; Michele Benanti; Luca Andena; Claudia Marano; Roberto Frassine; Marta Rink; Chiara Visentin; Paolo Bonfiglio; Francesco Pompoli; Nicola Prodi

AIP Conf. Proc. 1779, 090007 (2016) https://doi.org/10.1063/1.4965566

Abstract

View articletitled, Dynamic mechanical response of foams for noise control

Open the PDF for in another window

Production of mini tomato seedlings in biodegradable foams

N. Naime; A. J. C. Brant; A. B. Lugão; P. Ponce

AIP Conf. Proc. 1779, 090008 (2016) https://doi.org/10.1063/1.4965567

Abstract

View articletitled, Production of mini tomato seedlings in biodegradable foams

Open the PDF for in another window

Microcellular foams from PEEK/PEI miscible blends

Livia Cafiero; Olinda Alfano; Michele Iannone; Floriana Esposito; Salvatore Iannace; Luigi Sorrentino

AIP Conf. Proc. 1779, 090009 (2016) https://doi.org/10.1063/1.4965568

Abstract

View articletitled, Microcellular foams from PEEK/PEI miscible blends

Open the PDF for in another window

ADDITIVE MANUFACTURING

Impact of ageing, different share of recycled material and orientation on SLS polyamide product hardness

Ana Pilipović; Maja Rujnić-Sokele; Mladen Šercer

AIP Conf. Proc. 1779, 100001 (2016) https://doi.org/10.1063/1.4965569

Abstract

View articletitled, Impact of ageing, different share of recycled material and orientation on SLS polyamide product hardness

Open the PDF for in another window

Processing of polysulfone to free flowing powder for part manufacturing through selective laser sintering

N. Mys; R. Van de Sande; A. Verberckmoes; L. Cardon

AIP Conf. Proc. 1779, 100002 (2016) https://doi.org/10.1063/1.4965570

Abstract

View articletitled, Processing of polysulfone to free flowing powder for part manufacturing through selective laser sintering

Open the PDF for in another window

Thermal and molecular properties of polymer powders for Selective Laser Sintering (SLS)

Manfred Schmid; Konrad Wegener

AIP Conf. Proc. 1779, 100003 (2016) https://doi.org/10.1063/1.4965571

Abstract

View articletitled, Thermal and molecular properties of polymer powders for Selective Laser Sintering (SLS)

Open the PDF for in another window

Nucleation and impact modification of polypropylene laser sintered parts

R. G. Kleijnen; M. Schmid; K. Wegener

AIP Conf. Proc. 1779, 100004 (2016) https://doi.org/10.1063/1.4965572

Abstract

View articletitled, Nucleation and impact modification of polypropylene laser sintered parts

Open the PDF for in another window

Performance comparison of low-budget 3D printers

Damir Godec; Ivan Radoš; Mladen Šercer

AIP Conf. Proc. 1779, 100005 (2016) https://doi.org/10.1063/1.4965573

Abstract

View articletitled, Performance comparison of low-budget 3D printers

Open the PDF for in another window

Characterization of nanocomposite filaments developed for additive manufacturing

Fugen Daver; Robert A. Shanks; Milan Brandt

AIP Conf. Proc. 1779, 100006 (2016) https://doi.org/10.1063/1.4965574

Abstract

View articletitled, Characterization of nanocomposite filaments developed for additive manufacturing

Open the PDF for in another window

MATERIALS FOR MEDICINE

Polypropylene and polypropylene-elastomer blends for medical packaging

M. Sandholzer; K. Bernreitner; K. Klimke

AIP Conf. Proc. 1779, 110001 (2016) https://doi.org/10.1063/1.4965575

Abstract

View articletitled, Polypropylene and polypropylene-elastomer blends for medical packaging

Open the PDF for in another window

Study of the formation of globule-like surface microstructures on polyacrylamide nano-films synthesized via electro-polymerization process

Farhad Shahsavan; Ali Gooneie; Ashkan Shoja Chaykar; Majid Shahkaram; Hormoz Eslami

AIP Conf. Proc. 1779, 110002 (2016) https://doi.org/10.1063/1.4965576

Abstract

View articletitled, Study of the formation of globule-like surface microstructures on polyacrylamide nano-films synthesized via electro-polymerization process

Open the PDF for in another window

TEXTILES AND FIBRES

Theoretical analysis of the spunbond process and its applications for polypropylenes

Toshitaka Kanai; Youhei Kohri; Tomoaki Takebe

AIP Conf. Proc. 1779, 120001 (2016) https://doi.org/10.1063/1.4965577

Abstract

View articletitled, Theoretical analysis of the spunbond process and its applications for polypropylenes

Open the PDF for in another window

Melt-blowing conditions for preparing webs consisting of fine fibers

Ruamsk Renukarn; Wataru Takarada; Takeshi Kikutani

AIP Conf. Proc. 1779, 120002 (2016) https://doi.org/10.1063/1.4965578

Abstract

View articletitled, Melt-blowing conditions for preparing webs consisting of fine fibers

Open the PDF for in another window

Influence of braid set up and roving size to mechanical properties of biaxial carbon fiber braids

M. Brand; E. Ladstätter; K. Drechsler

AIP Conf. Proc. 1779, 120003 (2016) https://doi.org/10.1063/1.4965579

Abstract

View articletitled, Influence of braid set up and roving size to mechanical properties of biaxial carbon fiber braids

Open the PDF for in another window

POLYMER PROCESSING IN PHARMACY

Micro-pelletizing of pharmaceutical HME formulations using a die face pelletizer

A. Witschnigg; G. Koscher; D. Treffer; R. Mürb; S. Laske; J. Khinast

AIP Conf. Proc. 1779, 130001 (2016) https://doi.org/10.1063/1.4965580

Abstract

View articletitled, Micro-pelletizing of pharmaceutical HME formulations using a die face pelletizer

Open the PDF for in another window

RECYCLING

Environmental and economic life cycle analysis of plastic waste management options. A review

C. A. Bernardo; Carla L. Simões; Lígia M. Costa Pinto

AIP Conf. Proc. 1779, 140001 (2016) https://doi.org/10.1063/1.4965581

Abstract

View articletitled, Environmental and economic life cycle analysis of plastic waste management options. A review

Open the PDF for in another window

Recycling of cast polyamide waste on a twin-screw-extruder

B. Formisano; S. Göttermann; C. Bonten

AIP Conf. Proc. 1779, 140002 (2016) https://doi.org/10.1063/1.4965582

Abstract

View articletitled, Recycling of cast polyamide waste on a twin-screw-extruder

Open the PDF for in another window

Influence of nut shell powder content on the tribological properties of recycled polyolefin composites

Kazuma Mikawa; Akinori Hoshikawa; Yosuke Nishitani; Tsubasa Shimizu; Eiichi Takahashi; Takeshi Kitano

AIP Conf. Proc. 1779, 140003 (2016) https://doi.org/10.1063/1.4965583

Abstract

View articletitled, Influence of nut shell powder content on the tribological properties of recycled polyolefin composites

Open the PDF for in another window

The effect of extrusion reprocessing on the properties of montmorillonite filled polypropylene

Laurens Delva; Kim Ragaert; Joris Degrieck; Ludwig Cardon

AIP Conf. Proc. 1779, 140004 (2016) https://doi.org/10.1063/1.4965584

Abstract

View articletitled, The effect of extrusion reprocessing on the properties of montmorillonite filled polypropylene

Open the PDF for in another window

Influence of reprocessing on the mechanical properties of polyamide 6 containing talc

Gustavo D. Domingo; Adriana M. Catelli de Souza

AIP Conf. Proc. 1779, 140005 (2016) https://doi.org/10.1063/1.4965585

Abstract

View articletitled, Influence of reprocessing on the mechanical properties of polyamide 6 containing talc

Open the PDF for in another window

Blending of recycled mixed polyolefins with recycled polypropylene: Effect on physical and mechanical properties

Sara Hubo; Laurens Delva; Nicolas Van Damme; Kim Ragaert

AIP Conf. Proc. 1779, 140006 (2016) https://doi.org/10.1063/1.4965586

Abstract

View articletitled, Blending of recycled mixed polyolefins with recycled polypropylene: Effect on physical and mechanical properties

Open the PDF for in another window

Morphological and mechanical properties of injection molded recycled poly(ethylene terephthalate) samples

Bela Molnar; Ferenc Ronkay

AIP Conf. Proc. 1779, 140007 (2016) https://doi.org/10.1063/1.4965587

Abstract

View articletitled, Morphological and mechanical properties of injection molded recycled poly(ethylene terephthalate) samples

Open the PDF for in another window