Skip Nav Destination
Issues
7 July 2016
In this Issue
PRELIMINARY
Organizers: Thermophysics 2016
AIP Conf. Proc. 1752, 010002 (2016)
https://doi.org/10.1063/1.4955226
Committees: Thermophysics 2016
AIP Conf. Proc. 1752, 010003 (2016)
https://doi.org/10.1063/1.4955227
KEYNOTE PAPER
INVITED PAPERS
Thermal analysis on organic phase change materials for heat storage applications
AIP Conf. Proc. 1752, 030001 (2016)
https://doi.org/10.1063/1.4955229
Measurements of thermophysical properties of solids at the Institute VINČA
AIP Conf. Proc. 1752, 030002 (2016)
https://doi.org/10.1063/1.4955230
Estimation of building material moisture using non-invasive TDR sensors
AIP Conf. Proc. 1752, 030003 (2016)
https://doi.org/10.1063/1.4955231
REGULAR PAPERS
Order and disorder and their influences on optical absorption of glasses in the gap region
AIP Conf. Proc. 1752, 040001 (2016)
https://doi.org/10.1063/1.4955232
New way of measurement of thermophysical properties of clay loam materials by transient methods
AIP Conf. Proc. 1752, 040002 (2016)
https://doi.org/10.1063/1.4955233
Temperature resistance of the ternary gypsum-based binder with microsilica
AIP Conf. Proc. 1752, 040003 (2016)
https://doi.org/10.1063/1.4955234
Seebeck effect influence on joule heat evolution in electrically conductive silicate materials
AIP Conf. Proc. 1752, 040004 (2016)
https://doi.org/10.1063/1.4955235
Laboratory testing of a building envelope segment based on cellular concrete
AIP Conf. Proc. 1752, 040005 (2016)
https://doi.org/10.1063/1.4955236
Preparation of fine powdered composite for latent heat storage
AIP Conf. Proc. 1752, 040006 (2016)
https://doi.org/10.1063/1.4955237
Calibration of thermocouple psychrometers and moisture measurements in porous materials
AIP Conf. Proc. 1752, 040007 (2016)
https://doi.org/10.1063/1.4955238
Experimental comparison and validation of hot-ball method with guarded hot plate method on polyurethane foams
AIP Conf. Proc. 1752, 040008 (2016)
https://doi.org/10.1063/1.4955239
Building ceramics with an addition of pulverized combustion fly ash from the thermal power plant Nováky
AIP Conf. Proc. 1752, 040009 (2016)
https://doi.org/10.1063/1.4955240
Moisture characteristics of water-repellent consolidants and their applicability to existing buildings
AIP Conf. Proc. 1752, 040010 (2016)
https://doi.org/10.1063/1.4955241
Assessment of material degradation considering the characteristics of its pore structure
AIP Conf. Proc. 1752, 040012 (2016)
https://doi.org/10.1063/1.4955243
Effect of water-ice phase change on thermal performance of building materials
AIP Conf. Proc. 1752, 040013 (2016)
https://doi.org/10.1063/1.4955244
Porosity of UHPFRC exposed to high temperatures determined by different techniques
AIP Conf. Proc. 1752, 040014 (2016)
https://doi.org/10.1063/1.4955245
Analysis of the building constructions from the point of view of possible freeze-thaw deterioration
AIP Conf. Proc. 1752, 040018 (2016)
https://doi.org/10.1063/1.4955249
CFD simulation of simultaneous monotonic cooling and surface heat transfer coefficient
AIP Conf. Proc. 1752, 040020 (2016)
https://doi.org/10.1063/1.4955251
Long-term monitoring of the Sedlec Ossuary – Analysis of hygrothermal conditions
AIP Conf. Proc. 1752, 040021 (2016)
https://doi.org/10.1063/1.4955252
Thermophysical properties of hydrophobised lime plaster – Experimental analysis of moisture effect
AIP Conf. Proc. 1752, 040022 (2016)
https://doi.org/10.1063/1.4955253
Coagulated silica - a-SiO2 admixture in cement paste
AIP Conf. Proc. 1752, 040023 (2016)
https://doi.org/10.1063/1.4955254
Thermal conditions and perceived air quality in an air-conditioned auditorium
AIP Conf. Proc. 1752, 040024 (2016)
https://doi.org/10.1063/1.4955255
Young’s modulus and thermal expansion of ceramic samples made from kaolin and zeolite
AIP Conf. Proc. 1752, 040026 (2016)
https://doi.org/10.1063/1.4955257
Study of the thermal properties of filaments for 3D printing
AIP Conf. Proc. 1752, 040027 (2016)
https://doi.org/10.1063/1.4955258
Computational aspects of hot-wire identification of thermal conductivity and diffusivity under high temperature
AIP Conf. Proc. 1752, 040029 (2016)
https://doi.org/10.1063/1.4955260
Properties of lightweight cement-based composites containing waste polypropylene
AIP Conf. Proc. 1752, 040030 (2016)
https://doi.org/10.1063/1.4955261
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.