Skip Nav Destination
Issues
31 May 2016
In this Issue
PRELIMINARY
SOLAR COLLECTORS
New solar selective coating based on carbon nanotubes
Thomas Abendroth; Beate Leupolt; Gerrit Mäder; Paul Härtel; Wulf Grählert; Holger Althues; Stefan Kaskel; Eckhard Beyer
AIP Conf. Proc. 1734, 020001 (2016)
https://doi.org/10.1063/1.4949025
Stellio – development, construction and testing of a smart heliostat
AIP Conf. Proc. 1734, 020002 (2016)
https://doi.org/10.1063/1.4949026
Performance measurements of new silicon carbide coated reflectors for concentrated solar power applications
AIP Conf. Proc. 1734, 020003 (2016)
https://doi.org/10.1063/1.4949027
Influence of limited heliostat motion onto the efficiency of a solar field
AIP Conf. Proc. 1734, 020004 (2016)
https://doi.org/10.1063/1.4949028
Development of the ASTRI heliostat
Joe Coventry; Maziar Arjomandi; John Barry; Manuel Blanco; Greg Burgess; Jonathan Campbell; Phil Connor; Matthew Emes; Philip Fairman; David Farrant; Farzin Ghanadi; Victor Grigoriev; Colin Hall; Paul Koltun; David Lewis; Scott Martin; Graham Nathan; John Pye; Ang Qiu; Wayne Stuart; Youhong Tang; Felix Venn; Jeremy Yu
AIP Conf. Proc. 1734, 020005 (2016)
https://doi.org/10.1063/1.4949029
Validation of an optical model applied to the beam down CSP facility at the Masdar Institute Solar Platform
Benjamin Grange; Vikas Kumar; Juliana Beltran Torres; Victor G. Perez; Peter R. Armstrong; Alexander Slocum; Nicolas Calvet
AIP Conf. Proc. 1734, 020007 (2016)
https://doi.org/10.1063/1.4949031
Fourier sampling of sun path for applications in solar energy
AIP Conf. Proc. 1734, 020008 (2016)
https://doi.org/10.1063/1.4949032
State of the art of performance evaluation methods for concentrating solar collectors
Annie Hofer; Loreto Valenzuela; Nicole Janotte; Juan Ignacio Burgaleta; Jaime Arraiza; Marco Montecchi; Fabienne Sallaberry; Tiago Osório; Maria João Carvalho; Fabrizio Alberti; Korbinian Kramer; Anna Heimsath; Werner Platzer; Stephan Scholl
AIP Conf. Proc. 1734, 020010 (2016)
https://doi.org/10.1063/1.4949034
Energy cost based design optimization method for medium temperature CPC collectors
AIP Conf. Proc. 1734, 020011 (2016)
https://doi.org/10.1063/1.4949035
Thermal modeling of a secondary concentrator integrated with an open direct-absorption molten-salt volumetric receiver in a beam-down tower system
Radia Lahlou; Peter Armstrong; Benjamin Grange; Saif Almheiri; Nicolas Calvet; Alexander Slocum; Tariq Shamim
AIP Conf. Proc. 1734, 020012 (2016)
https://doi.org/10.1063/1.4949036
Introducing CFD in the optical simulation of linear Fresnel collectors
AIP Conf. Proc. 1734, 020015 (2016)
https://doi.org/10.1063/1.4949039
Low-cost small scale parabolic trough collector design for manufacturing and deployment in Africa
Matthew Orosz; Paul Mathaha; Anadola Tsiu; B. M. Taele; Lengeta Mabea; Marcel Ntee; Makoanyane Khakanyo; Tamer Teker; Jordan Stephens; Amy Mueller
AIP Conf. Proc. 1734, 020016 (2016)
https://doi.org/10.1063/1.4949040
Ray-tracing software comparison for linear focusing solar collectors
Tiago Osório; Pedro Horta; Marco Larcher; Ramón Pujol-Nadal; Julian Hertel; De Wet van Rooyen; Anna Heimsath; Simon Schneider; Daniel Benitez; Antoine Frein; Alice Denarie
AIP Conf. Proc. 1734, 020017 (2016)
https://doi.org/10.1063/1.4949041
Wind effects in solar fields with various collector designs
AIP Conf. Proc. 1734, 020018 (2016)
https://doi.org/10.1063/1.4949042
Influence of the gap size on the wind loading on heliostats
AIP Conf. Proc. 1734, 020019 (2016)
https://doi.org/10.1063/1.4949043
Mitigating project risk by use of high performance collector technology
AIP Conf. Proc. 1734, 020020 (2016)
https://doi.org/10.1063/1.4949044
Optimized molten salt receivers for ultimate trough solar fields
AIP Conf. Proc. 1734, 020021 (2016)
https://doi.org/10.1063/1.4949045
Contact cleaning of polymer film solar reflectors
AIP Conf. Proc. 1734, 020022 (2016)
https://doi.org/10.1063/1.4949046
An automated model-based aim point distribution system for solar towers
AIP Conf. Proc. 1734, 020023 (2016)
https://doi.org/10.1063/1.4949047
Construction and thermal efficiency test of 145m and 165m SpaceTube® large-aperture parabolic trough collector prototypes
Salvador Valenzuela Rubia; Markus Schramm; Hülya Yildiz; Patrick Marcotte; David Martín Casero; John Sebastian Magee
AIP Conf. Proc. 1734, 020024 (2016)
https://doi.org/10.1063/1.4949048
Reducing heliostat field costs by direct measurement and control of the mirror orientation
AIP Conf. Proc. 1734, 020025 (2016)
https://doi.org/10.1063/1.4949049
Optical advantages of astigmatic aberration corrected heliostats
AIP Conf. Proc. 1734, 020026 (2016)
https://doi.org/10.1063/1.4949050
Key aspects of cost effective collector and solar field design
AIP Conf. Proc. 1734, 020027 (2016)
https://doi.org/10.1063/1.4949051
Simultaneous optimization of micro-heliostat geometry and field layout using a genetic algorithm
AIP Conf. Proc. 1734, 020028 (2016)
https://doi.org/10.1063/1.4949052
THERMAL RECEIVERS
Numerical analysis of radiation propagation in innovative volumetric receivers based on selective laser melting techniques
Fabrizio Alberti; Sergio Santiago; Mattia Roccabruna; Salvador Luque; Jose Gonzalez-Aguilar; Luigi Crema; Manuel Romero
AIP Conf. Proc. 1734, 030001 (2016)
https://doi.org/10.1063/1.4949053
High performance felt-metal-wick heat pipe for solar receivers
AIP Conf. Proc. 1734, 030002 (2016)
https://doi.org/10.1063/1.4949054
Magnetic field flow phenomena in a falling particle receiver
AIP Conf. Proc. 1734, 030004 (2016)
https://doi.org/10.1063/1.4949056
Thermo-mechanical and optical optimization of the molten salt receiver for a given heliostat field
AIP Conf. Proc. 1734, 030005 (2016)
https://doi.org/10.1063/1.4949057
Arc deposited TiAlN selective absorber for high temperature CSP applications
AIP Conf. Proc. 1734, 030006 (2016)
https://doi.org/10.1063/1.4949058
Numerical evaluation of an innovative cup layout for open volumetric solar air receivers
AIP Conf. Proc. 1734, 030007 (2016)
https://doi.org/10.1063/1.4949059
Design requirements, challenges, and solutions for high-temperature falling particle receivers
AIP Conf. Proc. 1734, 030008 (2016)
https://doi.org/10.1063/1.4949060
Combining ray tracing and CFD in the thermal analysis of a parabolic dish tubular cavity receiver
AIP Conf. Proc. 1734, 030009 (2016)
https://doi.org/10.1063/1.4949061
Transient simulation of molten salt central receiver
Dimitri Doupis; Chuan Wang; Jorge Carcorze-Soto; Yen-Ming Chen; Andrea Maggi; Matteo Losito; Michael Clark
AIP Conf. Proc. 1734, 030013 (2016)
https://doi.org/10.1063/1.4949065
Reducing the convective losses of cavity receivers
AIP Conf. Proc. 1734, 030014 (2016)
https://doi.org/10.1063/1.4949066
Numerical approach to the flux distribution effect on a solar rotary kiln performance
AIP Conf. Proc. 1734, 030016 (2016)
https://doi.org/10.1063/1.4949068
A new laboratory-scale experimental facility for detailed aerothermal characterizations of volumetric absorbers
AIP Conf. Proc. 1734, 030018 (2016)
https://doi.org/10.1063/1.4949070
The hybrid pressurized air receiver (HPAR) in the SUNDISC cycle
AIP Conf. Proc. 1734, 030019 (2016)
https://doi.org/10.1063/1.4949071
Fused silica windows for solar receiver applications
AIP Conf. Proc. 1734, 030020 (2016)
https://doi.org/10.1063/1.4949072
Fractal-like receiver geometries and features for increased light trapping and thermal efficiency
AIP Conf. Proc. 1734, 030021 (2016)
https://doi.org/10.1063/1.4949073
Reduction of convective losses in solar cavity receivers
Graham Hughes; John Pye; Martin Kaufer; Ehsan Abbasi-Shavazi; Jack Zhang; Adam McIntosh; Tim Lindley
AIP Conf. Proc. 1734, 030023 (2016)
https://doi.org/10.1063/1.4949075
Test bench HEATREC for heat loss measurement on solar receiver tubes
AIP Conf. Proc. 1734, 030025 (2016)
https://doi.org/10.1063/1.4949077
Study and modeling of a pressurized air receiver to power a micro gas turbine
AIP Conf. Proc. 1734, 030027 (2016)
https://doi.org/10.1063/1.4949079
On-sun first operation of a 150 kWth pilot solar receiver using dense particle suspension as heat transfer fluid
Inmaculada Pérez López; Hadrien Benoit; Daniel Gauthier; Jean-Louis Sans; Emmanuel Guillot; Roland Cavaillé; German Mazza; Gilles Flamant
AIP Conf. Proc. 1734, 030028 (2016)
https://doi.org/10.1063/1.4949080
Development of a higher-efficiency tubular cavity receiver for direct steam generation on a dish concentrator
John Pye; Graham Hughes; Ehsan Abbasi; Charles-Alexis Asselineau; Greg Burgess; Joe Coventry; Will Logie; Felix Venn; José Zapata
AIP Conf. Proc. 1734, 030029 (2016)
https://doi.org/10.1063/1.4949081
Techno-economic analysis of receiver replacement scenarios in a parabolic trough field
AIP Conf. Proc. 1734, 030030 (2016)
https://doi.org/10.1063/1.4949082
CFD analysis of supercritical CO2 used as HTF in a solar tower receiver
AIP Conf. Proc. 1734, 030031 (2016)
https://doi.org/10.1063/1.4949083
Preliminary performance analysis of a transverse flow spectrally selective two-slab packed bed volumetric receiver
AIP Conf. Proc. 1734, 030032 (2016)
https://doi.org/10.1063/1.4949084
Experimental performance evaluation of a hybrid CST receiver for linear concentrators
AIP Conf. Proc. 1734, 030033 (2016)
https://doi.org/10.1063/1.4949085
LCOE reduction for parabolic trough CSP: Innovative solar receiver with improved performance at medium temperature
AIP Conf. Proc. 1734, 030034 (2016)
https://doi.org/10.1063/1.4949086
Optimal spacing within a tubed, volumetric, cavity receiver suitable for modular molten salt solar towers
AIP Conf. Proc. 1734, 030035 (2016)
https://doi.org/10.1063/1.4949087
Effects of vertically ribbed surface roughness on the forced convective heat losses in central receiver systems
AIP Conf. Proc. 1734, 030036 (2016)
https://doi.org/10.1063/1.4949088
Geometric optimization of a solar cubic-cavity multi-tubular reactor
AIP Conf. Proc. 1734, 030037 (2016)
https://doi.org/10.1063/1.4949089
SynLight – the world’s largest artificial sun
Kai Wieghardt; Karl-Heinz Funken; Gerd Dibowski; Bernhard Hoffschmidt; Dmitrij Laaber; Patrick Hilger; Kai-Peter Eßer
AIP Conf. Proc. 1734, 030038 (2016)
https://doi.org/10.1063/1.4949090
Preliminary discrete element modeling of a falling particle curtain for CSP central tower receivers
AIP Conf. Proc. 1734, 030039 (2016)
https://doi.org/10.1063/1.4949091
HEAT TRANSFER FLUIDS
Phenomenological studies on sodium for CSP applications: A safety review
AIP Conf. Proc. 1734, 040001 (2016)
https://doi.org/10.1063/1.4949092
Temperature influence on wall-to-particle suspension heat transfer in a solar tubular receiver
AIP Conf. Proc. 1734, 040002 (2016)
https://doi.org/10.1063/1.4949093
Heat transfer behavior of molten nitrate salt
AIP Conf. Proc. 1734, 040003 (2016)
https://doi.org/10.1063/1.4949094
Compatibility tests between Jarytherm® DBT synthetic oil and solid materials from wastes
AIP Conf. Proc. 1734, 040004 (2016)
https://doi.org/10.1063/1.4949095
Life time analysis of thermal oil used as heat transfer fluid in CSP power plant
AIP Conf. Proc. 1734, 040005 (2016)
https://doi.org/10.1063/1.4949096
Transient validation of RELAP5 model with the DISS facility in once through operation mode
AIP Conf. Proc. 1734, 040006 (2016)
https://doi.org/10.1063/1.4949097
Thermal fluids for CSP systems: Alkaline nitrates/nitrites thermodynamics modelling method
AIP Conf. Proc. 1734, 040007 (2016)
https://doi.org/10.1063/1.4949098
THERMAL/THERMOCHEMICAL ENERGY STORAGE
Effect of sand and moisture on molten salt properties for open direct absorption solar receiver/storage system
AIP Conf. Proc. 1734, 050002 (2016)
https://doi.org/10.1063/1.4949100
Thermodynamic study of CuO/Cu2O and Co3O4/CoO redox pairs for solar energy thermochemical storage
AIP Conf. Proc. 1734, 050004 (2016)
https://doi.org/10.1063/1.4949102
ABO3 (A = La, Ba, Sr, K; B = Co, Mn, Fe) perovskites for thermochemical energy storage
AIP Conf. Proc. 1734, 050006 (2016)
https://doi.org/10.1063/1.4949104
Benefits of production extension and shifting with thermal storage for a 1MW CSP-ORC plant in Morocco
AIP Conf. Proc. 1734, 050007 (2016)
https://doi.org/10.1063/1.4949105
Design of efficient Mn-based redox materials for thermochemical heat storage at high temperatures
AIP Conf. Proc. 1734, 050009 (2016)
https://doi.org/10.1063/1.4949107
Ammonia synthesis for producing supercritical steam in the context of solar thermochemical energy storage
AIP Conf. Proc. 1734, 050010 (2016)
https://doi.org/10.1063/1.4949108
Experimental measurements of thermal properties of high-temperature refractory materials used for thermal energy storage
Abdelrahman El-Leathy; Sheldon Jeter; Hany Al-Ansary; Said Abdel-Khalik; Matthew Golob; Syed Noman Danish; Rageh Saeed; Eldwin Djajadiwinata; Zeyad Al-Suhaibani
AIP Conf. Proc. 1734, 050012 (2016)
https://doi.org/10.1063/1.4949110
Experimental study of compatibility of reduced metal oxides with thermal energy storage lining materials
AIP Conf. Proc. 1734, 050013 (2016)
https://doi.org/10.1063/1.4949111
Design and modelling of an innovative three-stage thermal storage system for direct steam generation CSP plants
AIP Conf. Proc. 1734, 050015 (2016)
https://doi.org/10.1063/1.4949113
Second test campaign of a pilot scale latent heat thermal energy storage – Durability and operational strategies
AIP Conf. Proc. 1734, 050016 (2016)
https://doi.org/10.1063/1.4949114
Concentrated solar power on demand demonstration: Construction and operation of a 25 kW prototype
AIP Conf. Proc. 1734, 050017 (2016)
https://doi.org/10.1063/1.4949115
New materials for thermal energy storage in concentrated solar power plants
AIP Conf. Proc. 1734, 050018 (2016)
https://doi.org/10.1063/1.4949116
Industrial waste materials and by-products as thermal energy storage (TES) materials: A review
Andrea Gutierrez; Laia Miró; Antoni Gil; Javier Rodríguez-Aseguinolaza; Camila Barreneche; Nicolas Calvet; Xavier Py; A. Inés Fernández; Mario Grágeda; Svetlana Ushak; Luisa F. Cabeza
AIP Conf. Proc. 1734, 050019 (2016)
https://doi.org/10.1063/1.4949117
A numerical model for thermal energy storage systems utilising encapsulated phase change materials
AIP Conf. Proc. 1734, 050020 (2016)
https://doi.org/10.1063/1.4949118
Geopolymer encapsulation of a chloride salt phase change material for high temperature thermal energy storage
AIP Conf. Proc. 1734, 050021 (2016)
https://doi.org/10.1063/1.4949119
Experimental testing of various heat transfer structures in a flat plate thermal energy storage unit
AIP Conf. Proc. 1734, 050022 (2016)
https://doi.org/10.1063/1.4949120
Packed bed heat storage: Continuum mechanics model and validation
AIP Conf. Proc. 1734, 050024 (2016)
https://doi.org/10.1063/1.4949122
Solar tower power plant using a particle-heated steam generator: Modeling and parametric study
AIP Conf. Proc. 1734, 050025 (2016)
https://doi.org/10.1063/1.4949123
Materials compatibility in Dish-Stirling solar generators using Cu-Si-Mg eutectic for latent heat storage
AIP Conf. Proc. 1734, 050026 (2016)
https://doi.org/10.1063/1.4949124
Charging studies of heat packs using parabolic dish solar energy concentrator for extreme conditions
AIP Conf. Proc. 1734, 050027 (2016)
https://doi.org/10.1063/1.4949125
Stability and corrosion testing of a high temperature phase change material for CSP applications
AIP Conf. Proc. 1734, 050029 (2016)
https://doi.org/10.1063/1.4949127
The influence of mixing water on the thermophysical properties of nanofluids based on solar salt and silica nanoparticles
B. Muñoz-Sánchez; J. Nieto-Maestre; I. Iparraguirre-Torres; J. A. Sánchez-García; J. E. Julia; A. García-Romero
AIP Conf. Proc. 1734, 050031 (2016)
https://doi.org/10.1063/1.4949129
Novel metallic alloys as phase change materials for heat storage in direct steam generation applications
AIP Conf. Proc. 1734, 050032 (2016)
https://doi.org/10.1063/1.4949130
Solar thermoelectricity via advanced latent heat storage
M. L. Olsen; J. Rea; G. C. Glatzmaier; C. Hardin; C. Oshman; J. Vaughn; T. Roark; J. W. Raade; R. W. Bradshaw; J. Sharp; A. D. Avery; D. Bobela; R. Bonner; R. Weigand; D. Campo; P. A. Parilla; N. P. Siegel; E. S. Toberer; D. S. Ginley
AIP Conf. Proc. 1734, 050035 (2016)
https://doi.org/10.1063/1.4949133
Effect of NaOH addition on a ternary carbonate salt to be used as storage medium for CSP plants
AIP Conf. Proc. 1734, 050038 (2016)
https://doi.org/10.1063/1.4949136
Numerical modeling of inward and outward melting of high temperature PCM in a vertical cylinder
AIP Conf. Proc. 1734, 050039 (2016)
https://doi.org/10.1063/1.4949137
Development and evaluation of materials for thermochemical heat storage based on the CaO/CaCO3 reaction couple
Kyriaki G. Sakellariou; Nikolaos I. Tsongidis; George Karagiannakis; Athanasios G. Konstandopoulos; Diana Baciu; Georgia Charalambopoulou; Theodore Steriotis; Athanasios Stubos; Wolfgang Arlt
AIP Conf. Proc. 1734, 050040 (2016)
https://doi.org/10.1063/1.4949138
Development of a moving bed pilot plant for thermochemical energy storage with CaO/Ca(OH)2
AIP Conf. Proc. 1734, 050041 (2016)
https://doi.org/10.1063/1.4949139
High temperature thermocline TES – effect of system pre-charging on thermal stratification
AIP Conf. Proc. 1734, 050043 (2016)
https://doi.org/10.1063/1.4949141
POWER CYCLES
New design for CSP plant with direct-steam solar receiver and molten-salt storage
AIP Conf. Proc. 1734, 060001 (2016)
https://doi.org/10.1063/1.4949143
CSP SYSTEMS
Particle tower technology applied to metallurgic plants and peak-time boosting of steam power plants
AIP Conf. Proc. 1734, 070001 (2016)
https://doi.org/10.1063/1.4949148
Optical design and optimization of parabolic dish solar concentrator with a cavity hybrid receiver
AIP Conf. Proc. 1734, 070002 (2016)
https://doi.org/10.1063/1.4949149
The 3D heat flux density distribution on a novel parabolic trough wavy absorber
AIP Conf. Proc. 1734, 070004 (2016)
https://doi.org/10.1063/1.4949151
Progress in preliminary studies at Ottana Solar Facility
AIP Conf. Proc. 1734, 070005 (2016)
https://doi.org/10.1063/1.4949152
Techno-economic performance evaluation of solar tower plants with integrated multi-layered PCM thermocline thermal energy storage – A comparative study to conventional two-tank storage systems
Rafael Guedéz; Davide Ferruzza; Monica Arnaudo; Ivette Rodríguez; Carlos D. Perez-Segarra; Zhor Hassar; Björn Laumert
AIP Conf. Proc. 1734, 070012 (2016)
https://doi.org/10.1063/1.4949159
Numerical simulation of a parabolic trough solar collector for hot water and steam generation
AIP Conf. Proc. 1734, 070013 (2016)
https://doi.org/10.1063/1.4949160
Dynamic modelling and simulation of linear Fresnel solar field model based on molten salt heat transfer fluid
AIP Conf. Proc. 1734, 070014 (2016)
https://doi.org/10.1063/1.4949161
Use of MEMs and optical sensors for closed loop heliostat control
AIP Conf. Proc. 1734, 070015 (2016)
https://doi.org/10.1063/1.4949162
Steps towards a CSP yield calculation guideline: A first draft for discussion in the SolarPACES working group guiSmo
Tobias Hirsch; Camille Bachelier; Markus Eck; Jürgen Dersch; Thomas Fluri; Stefano Giuliano; Olaf Goebel; Ursula Haller; Simon Lude; Richard Meyer; Christoph Rau; Heiko Schenk; Norbert Schmidt; Markus Seitz; Boris Westphal; Enver Yildiz
AIP Conf. Proc. 1734, 070016 (2016)
https://doi.org/10.1063/1.4949163
Techno-economic assessment of a hybrid solar receiver and combustor
AIP Conf. Proc. 1734, 070020 (2016)
https://doi.org/10.1063/1.4949167
Preliminary study of a small beam-down solar tower on sub-Saharan countries
AIP Conf. Proc. 1734, 070021 (2016)
https://doi.org/10.1063/1.4949168
An investigation on factors influencing dust accumulation on CSP mirrors
AIP Conf. Proc. 1734, 070024 (2016)
https://doi.org/10.1063/1.4949171
Novel solar tower structure to lower plant cost and construction risk
AIP Conf. Proc. 1734, 070025 (2016)
https://doi.org/10.1063/1.4949172
Combined solar thermal and photovoltaic power plants – An approach to 24h solar electricity?
AIP Conf. Proc. 1734, 070026 (2016)
https://doi.org/10.1063/1.4949173
Concentrating solar power (CSP) power cycle improvements through application of advanced materials
AIP Conf. Proc. 1734, 070030 (2016)
https://doi.org/10.1063/1.4949177
CSP scenarios in South Africa: Benefits of CSP and the lessons learned
AIP Conf. Proc. 1734, 070031 (2016)
https://doi.org/10.1063/1.4949178
Simulation and experimental research of 1MWe solar tower power plant in China
AIP Conf. Proc. 1734, 070032 (2016)
https://doi.org/10.1063/1.4949179
Combined solar heat and power system with a latent heat storage – system simulations for an economic assessment
AIP Conf. Proc. 1734, 070033 (2016)
https://doi.org/10.1063/1.4949180
GRID INTEGRATION
Comparing the net cost of CSP-TES to PV deployed with battery storage
AIP Conf. Proc. 1734, 080003 (2016)
https://doi.org/10.1063/1.4949183
MOREMix - Power sector optimization for Morocco
AIP Conf. Proc. 1734, 080004 (2016)
https://doi.org/10.1063/1.4949184
Solar hybrid power plants: Solar energy contribution in reaching full dispatchability and firmness
AIP Conf. Proc. 1734, 080005 (2016)
https://doi.org/10.1063/1.4949185
RELIABILITY AND SERVICE LIFE PREDICTION
Hydrogen generation in CSP plants and maintenance of DPO/BP heat transfer fluids – A simulation approach
AIP Conf. Proc. 1734, 090002 (2016)
https://doi.org/10.1063/1.4949187