Skip Nav Destination
Issues
PRELIMINARY
ARTICLES
Effect of alloying elements Al and Ca on corrosion resistance of plasma anodized Mg alloys
AIP Conf. Proc. 1725, 020002 (2016)
https://doi.org/10.1063/1.4945456
Facile synthesis of graphene from graphite using ascorbic acid as reducing agent
AIP Conf. Proc. 1725, 020003 (2016)
https://doi.org/10.1063/1.4945457
Toughening and strengthening of ceramics composite through microstructural refinement
AIP Conf. Proc. 1725, 020004 (2016)
https://doi.org/10.1063/1.4945458
The effect of tempering temperature on pitting corrosion resistance of 420 stainless steels
AIP Conf. Proc. 1725, 020005 (2016)
https://doi.org/10.1063/1.4945459
Fixation strength analysis of cup to bone material using finite element simulation
AIP Conf. Proc. 1725, 020006 (2016)
https://doi.org/10.1063/1.4945460
Crystal structures and magnetic properties of magnetite (Fe3O4)/Polyvinyl alcohol (PVA) ribbon
AIP Conf. Proc. 1725, 020007 (2016)
https://doi.org/10.1063/1.4945461
Structure and high temperature oxidation of mechanical alloyed Fe-Al coating
AIP Conf. Proc. 1725, 020008 (2016)
https://doi.org/10.1063/1.4945462
Microstructure and oxidation behavior of high strength steel AISI 410 implanted with nitrogen ion
AIP Conf. Proc. 1725, 020010 (2016)
https://doi.org/10.1063/1.4945464
Light induced dielectric constant of Alumina doped lead silicate glass based on silica sands
AIP Conf. Proc. 1725, 020013 (2016)
https://doi.org/10.1063/1.4945467
Preparation of graphene oxide/poly (3,4-ethylenedioxytriophene): Poly (styrene sulfonate) (PEDOT:PSS) electrospun nanofibers
Vita Efelina; Eri Widianto; Dadi Rusdiana; A. A. Nugroho; Ahmad Kusumaatmaja; Kuwat Triyana; Iman Santoso
AIP Conf. Proc. 1725, 020014 (2016)
https://doi.org/10.1063/1.4945468
Interfacial reactions and wetting in Al-Mg sintered by powder metallurgy process
AIP Conf. Proc. 1725, 020017 (2016)
https://doi.org/10.1063/1.4945471
Modelling and simulation of parallel triangular triple quantum dots (TTQD) by using SIMON 2.0
AIP Conf. Proc. 1725, 020018 (2016)
https://doi.org/10.1063/1.4945472
Rotary forcespun styrofoam fibers as a soilless growing medium
AIP Conf. Proc. 1725, 020019 (2016)
https://doi.org/10.1063/1.4945473
Synthesis and visible light photocatalytic properties of iron oxide–silver orthophosphate composites
AIP Conf. Proc. 1725, 020021 (2016)
https://doi.org/10.1063/1.4945475
Structural modification of strontium hexaferrite through destruction process and ionic substitution
AIP Conf. Proc. 1725, 020022 (2016)
https://doi.org/10.1063/1.4945476
Composite Nafion 117-TMSP membrane for Fe-Cr redox flow battery applications
AIP Conf. Proc. 1725, 020024 (2016)
https://doi.org/10.1063/1.4945478
Manufacture of Bi, Pb-Sr-Ca-Cu-O pellet disc using wet method
AIP Conf. Proc. 1725, 020026 (2016)
https://doi.org/10.1063/1.4945480
Stress investigation on the rolling tires across the speed bump using finite element method
AIP Conf. Proc. 1725, 020028 (2016)
https://doi.org/10.1063/1.4945482
The synthesis and characterization of Mg-Zn-Ca alloy by powder metallurgy process
AIP Conf. Proc. 1725, 020032 (2016)
https://doi.org/10.1063/1.4945486
The tensile strength properties of CFRPs and GRRPs for Unnes electric car body material
AIP Conf. Proc. 1725, 020033 (2016)
https://doi.org/10.1063/1.4945487
Removal of vertigo blue dyes from Batik textile wastewater by adsorption onto activated carbon and coal bottom ash
AIP Conf. Proc. 1725, 020036 (2016)
https://doi.org/10.1063/1.4945490
Optimization on electrochemical synthesis of HKUST-1 as candidate catalytic material for Green diesel production
AIP Conf. Proc. 1725, 020038 (2016)
https://doi.org/10.1063/1.4945492
Tensile properties of the modified 13Cr martensitic stainless steels
AIP Conf. Proc. 1725, 020039 (2016)
https://doi.org/10.1063/1.4945493
Synthesis and characterization of Allium cepa L. as photosensitizer of dye-sensitized solar cell
AIP Conf. Proc. 1725, 020040 (2016)
https://doi.org/10.1063/1.4945494
Effect of sulfuric acid concentration of bentonite and calcination time of pillared bentonite
AIP Conf. Proc. 1725, 020042 (2016)
https://doi.org/10.1063/1.4945496
Effects of alkali treatment on the mechanical and thermal properties of Sansevieria trifasciata fiber
AIP Conf. Proc. 1725, 020043 (2016)
https://doi.org/10.1063/1.4945497
Optical and physical properties of PbO-modified TeO2-ZnO-Bi2O3 glasses
AIP Conf. Proc. 1725, 020044 (2016)
https://doi.org/10.1063/1.4945498
Solution of reduced graphene oxide synthesized from coconut shells and its optical properties
AIP Conf. Proc. 1725, 020045 (2016)
https://doi.org/10.1063/1.4945499
The beneficial effect of superhydropobic layer addition on lubrication behavior in bearing application
AIP Conf. Proc. 1725, 020047 (2016)
https://doi.org/10.1063/1.4945501
The effect of boundary slip and cavitation on hydrodynamic pressure generation in pocket bearings
AIP Conf. Proc. 1725, 020048 (2016)
https://doi.org/10.1063/1.4945502
Influence of substrate orientation on the structural properties of GaAs nanowires in MOCVD
AIP Conf. Proc. 1725, 020049 (2016)
https://doi.org/10.1063/1.4945503
Rısk analysis for pressure vessel with external corrosion using RBI method based on API 581
AIP Conf. Proc. 1725, 020052 (2016)
https://doi.org/10.1063/1.4945506
Risk based inspection for atmospheric storage tank
AIP Conf. Proc. 1725, 020055 (2016)
https://doi.org/10.1063/1.4945509
Synthesis of microforsterite using derived-amorphous-silica of silica sands
AIP Conf. Proc. 1725, 020056 (2016)
https://doi.org/10.1063/1.4945510
Numerical analysis of tire/contact pressure using finite element method
AIP Conf. Proc. 1725, 020058 (2016)
https://doi.org/10.1063/1.4945512
Prediction of 3D chip formation in the facing cutting with lathe machine using FEM
AIP Conf. Proc. 1725, 020059 (2016)
https://doi.org/10.1063/1.4945513
Tribological characteristic enhancement effects by polymer thickened oil in lubricated sliding contacts
AIP Conf. Proc. 1725, 020060 (2016)
https://doi.org/10.1063/1.4945514
Risk analysis of heat recovery steam generator with semi quantitative risk based inspection API 581
AIP Conf. Proc. 1725, 020062 (2016)
https://doi.org/10.1063/1.4945516
Nano-sized ZnO powders prepared by co-precipitation method with various pH
AIP Conf. Proc. 1725, 020063 (2016)
https://doi.org/10.1063/1.4945517
The influence of electron discharge and magnetic field on calcium carbonate (CaCO3) precipitation
AIP Conf. Proc. 1725, 020067 (2016)
https://doi.org/10.1063/1.4945521
Influence Al doped ZnO nanostructure on structural and optical properties
AIP Conf. Proc. 1725, 020068 (2016)
https://doi.org/10.1063/1.4945522
Impact of methanol-gasoline fuel blend on the fuel consumption and exhaust emission of a SI engine
AIP Conf. Proc. 1725, 020070 (2016)
https://doi.org/10.1063/1.4945524
Crystallinity and thermal resistance of microcrystalline cellulose prepared from manau rattan (Calamusmanan)
AIP Conf. Proc. 1725, 020071 (2016)
https://doi.org/10.1063/1.4945525
Internal transmission coefficient in charges carrier generation layer of graphene/Si based solar cell device
AIP Conf. Proc. 1725, 020072 (2016)
https://doi.org/10.1063/1.4945526
Preliminary study of application of Moringa oleifera resin as polymer electrolyte in DSSC solar cells
AIP Conf. Proc. 1725, 020073 (2016)
https://doi.org/10.1063/1.4945527
Finite element analysis of the impingement on the acetabular liner rim due to wear of the acetabular liner surface
AIP Conf. Proc. 1725, 020074 (2016)
https://doi.org/10.1063/1.4945528
Finite element study of contact pressure distribution on inner and outer liner in the bipolar hip prosthesis
AIP Conf. Proc. 1725, 020075 (2016)
https://doi.org/10.1063/1.4945529
Optimalization activity of ZnO NR/TiO2 NR-P3HT as an active layer based on hybrid bulk heterojunction on dye sensitized solar cell (DSSC)
Liya Nikmatul Maula Zulfa Saputri; Ari Handono Ramelan; Qonita Awliya Hanif; Yesi Ihdina Fityatal Hasanah; Lau Bekti Prajanira; Sayekti Wahyuningsih
AIP Conf. Proc. 1725, 020076 (2016)
https://doi.org/10.1063/1.4945530
Synthesis of PDLLA/PLLA-bentonite nanocomposite through sonication
AIP Conf. Proc. 1725, 020080 (2016)
https://doi.org/10.1063/1.4945534
Bio-composites fabricated by sandwiching sisal fibers with polypropylene (PP)
AIP Conf. Proc. 1725, 020081 (2016)
https://doi.org/10.1063/1.4945535
Fabrication of porous carbon composite material from leaves waste as lightweight expanded carbon aggregate (LECA)
AIP Conf. Proc. 1725, 020084 (2016)
https://doi.org/10.1063/1.4945538
Amidation reaction of eugenyl oxyacetate ethyl ester with 1,3 diaminopropane
AIP Conf. Proc. 1725, 020085 (2016)
https://doi.org/10.1063/1.4945539
Autist mobile seat’s frame strength simulation used in a car
AIP Conf. Proc. 1725, 020086 (2016)
https://doi.org/10.1063/1.4945540
Impact of post-treatment on the characteristics of electrospun poly (vinyl alcohol)/chitosan nanofibers
AIP Conf. Proc. 1725, 020087 (2016)
https://doi.org/10.1063/1.4945541
Synergy effect in sonodegradation of organic dye using graphene based magnetite composite materials
AIP Conf. Proc. 1725, 020089 (2016)
https://doi.org/10.1063/1.4945543
Estimation of appropriate lubricating film thickness in ceramic-on-ceramic hip prostheses
AIP Conf. Proc. 1725, 020090 (2016)
https://doi.org/10.1063/1.4945544
Microstructure analysis in friction welding of copper and aluminum
AIP Conf. Proc. 1725, 020095 (2016)
https://doi.org/10.1063/1.4945549
Preparation of graphene oxide/poly (3,4-ethylenedioxytriophene): Poly (styrene sulfonate) (PEDOT:PSS) electrospun nanofibers
Eri Widianto; Vita Efelina; Dadi Rusdiana; A. A. Nugroho; Ahmad Kusumaatmaja; Kuwat Triyana; Iman Santoso
AIP Conf. Proc. 1725, 020096 (2016)
https://doi.org/10.1063/1.4945550
Synthesis of kerosene based nanocarbons by a nebulized spray pyrolysis method
AIP Conf. Proc. 1725, 020097 (2016)
https://doi.org/10.1063/1.4945551
Effect of calcination temperature on the photocatalytic activity of TiO2 powders prepared by co-precipitation of TiCl3
Gatut Yudoyono; Nur Ichzan; Vicran Zharvan; Rizqa Daniyati; Hadi Santoso; Bachtera Indarto; Yono Hadi Pramono; Mochamad Zainuri; Darminto
AIP Conf. Proc. 1725, 020099 (2016)
https://doi.org/10.1063/1.4945553
Enhancement of iron content in spinach plants stimulated by magnetic nano particles
AIP Conf. Proc. 1725, 020100 (2016)
https://doi.org/10.1063/1.4945554
Study of parallel oriented electrospun polyvinyl alcohol (PVA) nanofibers using modified electrospinning method
Yusril Yusuf; Nur Mufidatul Ula; Khannah Jahidah; Ervanggis Minggar Kusumasari; Kuwat Triyana; Harini Sosiati; Harsojo
AIP Conf. Proc. 1725, 020104 (2016)
https://doi.org/10.1063/1.4945558
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Classification data mining with Laplacian Smoothing on Naïve Bayes method
Ananda P. Noto, Dewi R. S. Saputro
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.