Skip Nav Destination
Issues
29 March 2016
In this Issue
PRELIMINARY
PLENARY PAPERS
National Composite Center–A new roof for composite industries in Malaysia
AIP Conf. Proc. 1717, 020001 (2016)
https://doi.org/10.1063/1.4943423
Irreversible electroporation: Medical application of intense electric pulses for sustainable health
AIP Conf. Proc. 1717, 020002 (2016)
https://doi.org/10.1063/1.4943424
ENERGY
A simulation for predicting potential cooling effect on LPG-fuelled vehicles
AIP Conf. Proc. 1717, 030002 (2016)
https://doi.org/10.1063/1.4943426
A computer program for designing fin-and-tube heat exchanger for EGR cooler application
AIP Conf. Proc. 1717, 030004 (2016)
https://doi.org/10.1063/1.4943428
Magnetorheological valve based actuator for improvement of passively controlled turbocharger system
AIP Conf. Proc. 1717, 030007 (2016)
https://doi.org/10.1063/1.4943431
Kinetic modeling of solid yields formation in the fast pyrolysis of mahogany wood
AIP Conf. Proc. 1717, 030008 (2016)
https://doi.org/10.1063/1.4943432
A comparative study of emission motorcycle with gasoline and CNG fuel
AIP Conf. Proc. 1717, 030009 (2016)
https://doi.org/10.1063/1.4943433
A preliminary study on the potency of nanofluids as the electro-active materials for nanoelectrofuel flow batteries
AIP Conf. Proc. 1717, 030010 (2016)
https://doi.org/10.1063/1.4943434
Characteristic of flotation deinking using bio and synthetic surfactant at different air flow rate
AIP Conf. Proc. 1717, 030011 (2016)
https://doi.org/10.1063/1.4943435
Study on propane-butane gas storage by hydrate technology
AIP Conf. Proc. 1717, 030014 (2016)
https://doi.org/10.1063/1.4943438
Wind energy potential analysis in Al-Fattaih-Darnah
AIP Conf. Proc. 1717, 030015 (2016)
https://doi.org/10.1063/1.4943439
Hermetic compressor and block expansion valve in refrigeration performance
AIP Conf. Proc. 1717, 030016 (2016)
https://doi.org/10.1063/1.4943440
Feasibility study on wave energy power plant with oscillating water column system in Bawean Island Seas Indonesia
AIP Conf. Proc. 1717, 030017 (2016)
https://doi.org/10.1063/1.4943441
Wind potential assessment to estimate performance of selected wind turbines in Pandansimo Beach-Yogyakarta
AIP Conf. Proc. 1717, 030018 (2016)
https://doi.org/10.1063/1.4943442
MATERIALS
Effect of sintering temperatures and screen printing types on TiO2 layers in DSSC applications
AIP Conf. Proc. 1717, 040001 (2016)
https://doi.org/10.1063/1.4943444
The electric conductivity of Cu-doped ZnO as effect of sintering temperature
AIP Conf. Proc. 1717, 040002 (2016)
https://doi.org/10.1063/1.4943445
The design of Cu-doped ZnO thermoelectric module (simulation study)
AIP Conf. Proc. 1717, 040003 (2016)
https://doi.org/10.1063/1.4943446
Effect of acidity on the energy level of curcumin dye extracted from Curcuma longa L.
AIP Conf. Proc. 1717, 040005 (2016)
https://doi.org/10.1063/1.4943448
Enhancement ZnO nanofiber as semiconductor for dye-sensitized solar cells by using Al doped
AIP Conf. Proc. 1717, 040006 (2016)
https://doi.org/10.1063/1.4943449
The possibility of E-glass woven roving as reinforcement of GFRP composite sheet roof
AIP Conf. Proc. 1717, 040007 (2016)
https://doi.org/10.1063/1.4943450
Estimation of foot pressure from human footprint depths using 3D scanner
AIP Conf. Proc. 1717, 040008 (2016)
https://doi.org/10.1063/1.4943451
Torsion strength of continuous drive friction weld joint of round bar aluminum A6061 affected by single cone geometry of friction area
Yudy Surya Irawan; Muhammad Amirullah; Galih Bramantya Dian Gumilang; Tjuk Oerbandono; Wahyono Suprapto
AIP Conf. Proc. 1717, 040010 (2016)
https://doi.org/10.1063/1.4943453
Temperature comparison of initial, middle and final point of polypropylene friction stir welded
AIP Conf. Proc. 1717, 040011 (2016)
https://doi.org/10.1063/1.4943454
Effect of layer thickness on the properties of nickel thermal sprayed steel
AIP Conf. Proc. 1717, 040012 (2016)
https://doi.org/10.1063/1.4943455
Tensile strength of ramie yarn (spinning by machine)/HDPE thermoplastic matrix composites
AIP Conf. Proc. 1717, 040013 (2016)
https://doi.org/10.1063/1.4943456
Modeling of the cooling rate effect on the residual stress formation in the cantala fiber/recycled HDPE composites
AIP Conf. Proc. 1717, 040014 (2016)
https://doi.org/10.1063/1.4943457
Characterization of compressive and short beam shear strength of bamboo opened cell foam core sandwich composites
AIP Conf. Proc. 1717, 040016 (2016)
https://doi.org/10.1063/1.4943459
Modelling of void reduction in two dimensional cantala fiber/recycled HDPE composites using FEM
AIP Conf. Proc. 1717, 040017 (2016)
https://doi.org/10.1063/1.4943460
Mechanical properties of untreated and alkaline treated fibers from zalacca midrib wastes
AIP Conf. Proc. 1717, 040018 (2016)
https://doi.org/10.1063/1.4943461
Effect of alkaline treatment on the characterization of zalacca midrib wastes fibers
AIP Conf. Proc. 1717, 040019 (2016)
https://doi.org/10.1063/1.4943462
Review on failure prediction techniques of composite single lap joint
AIP Conf. Proc. 1717, 040020 (2016)
https://doi.org/10.1063/1.4943463
Effect of temperature on the dynamic characteristics of the glass-carbon fiber hybrid composites
AIP Conf. Proc. 1717, 040023 (2016)
https://doi.org/10.1063/1.4943466
Tensile and burning properties of clay/phenolic/GF composite and its application
AIP Conf. Proc. 1717, 040024 (2016)
https://doi.org/10.1063/1.4943467
Effect of carbonyl iron particles composition on the physical characteristics of MR grease
AIP Conf. Proc. 1717, 040027 (2016)
https://doi.org/10.1063/1.4943470
Biodegradation rate of shellac coated bovine hydroxyapatite for bone filler material
AIP Conf. Proc. 1717, 040029 (2016)
https://doi.org/10.1063/1.4943472
Two-level quenching of photoluminescence in hexagonal boron nitride micropowder
AIP Conf. Proc. 1717, 040030 (2016)
https://doi.org/10.1063/1.4943473
DESIGN AND MODELING
Non-iterative distance constraints enforcement for cloth drapes simulation
AIP Conf. Proc. 1717, 050001 (2016)
https://doi.org/10.1063/1.4943476
Crash simulation of UNS electric vehicle under frontal front impact
AIP Conf. Proc. 1717, 050002 (2016)
https://doi.org/10.1063/1.4943477
Design, simulation and analysis of 3 kW low speed axial flux permanent magnet generator
AIP Conf. Proc. 1717, 050004 (2016)
https://doi.org/10.1063/1.4943479
Magnetostatic simulation on a novel design of axially multi-coiled magnetorheological brakes
AIP Conf. Proc. 1717, 050005 (2016)
https://doi.org/10.1063/1.4943480
Design, construction and evaluation of a standing wave thermoacoustic prime mover
AIP Conf. Proc. 1717, 050007 (2016)
https://doi.org/10.1063/1.4943482
Study on antilock brake system with elastic membrane vibration generated by controlled solenoid excitation
AIP Conf. Proc. 1717, 050008 (2016)
https://doi.org/10.1063/1.4943483
Crash energy absorption of two-segment crash box with holes under frontal load
AIP Conf. Proc. 1717, 050009 (2016)
https://doi.org/10.1063/1.4943484
A study experiment of auto idle application in the excavator engine performance
AIP Conf. Proc. 1717, 050010 (2016)
https://doi.org/10.1063/1.4943485
Design and testing of fish drier system utilizing geothermal energy resource in Ie Suum, Aceh Besar
AIP Conf. Proc. 1717, 050011 (2016)
https://doi.org/10.1063/1.4943486
Perfect sound insulation property of reclaimed waste tire rubber
AIP Conf. Proc. 1717, 050012 (2016)
https://doi.org/10.1063/1.4943487
Study of hybrid power system potential to power agricultural water pump in mountain area
AIP Conf. Proc. 1717, 050013 (2016)
https://doi.org/10.1063/1.4943488
Enhancement of acoustical performance of hollow tube sound absorber
AIP Conf. Proc. 1717, 050014 (2016)
https://doi.org/10.1063/1.4943489
Design of drying chamber and biomass furnace for sun-biomass hybrid rice-drying machine
AIP Conf. Proc. 1717, 050015 (2016)
https://doi.org/10.1063/1.4943490
Design analysis of vertical wind turbine with airfoil variation
AIP Conf. Proc. 1717, 050016 (2016)
https://doi.org/10.1063/1.4943491
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
The effect of a balanced diet on improving the quality of life in malignant neoplasms
Yu. N. Melikova, A. S. Kuryndina, et al.
Animal intrusion detection system using Mask RCNN
C. Vijayakumaran, Dakshata, et al.