Skip Nav Destination

Issues

Select Decade

Select Year

Issue

PRELIMINARY

Preface: 31^st International Conference of the Polymer Processing Society

AIP Conf. Proc. 1713, 010001 (2016) https://doi.org/10.1063/1.4942255

View articletitled, Preface: 31st International Conference of the Polymer Processing Society

Open the PDF for in another window

List of Sponsors: 31^st International Conference of the Polymer Processing Society

AIP Conf. Proc. 1713, 010002 (2016) https://doi.org/10.1063/1.4942256

View articletitled, List of Sponsors: 31st International Conference of the Polymer Processing Society

Open the PDF for in another window

G1. RHEOLOGY AND RHEOMETRY

Rheological behavior of branch modified poly(butylene succinate) by butyl glycidyl ether

Zhiguo Qi; Yu Zhang; Jun Xu; Baohua Guo

AIP Conf. Proc. 1713, 020001 (2016) https://doi.org/10.1063/1.4942257

Abstract

View articletitled, Rheological behavior of branch modified poly(butylene succinate) by butyl glycidyl ether

Open the PDF for in another window

Stress relaxation behavior of polyolefin polymer blends based on PP/HDPE

M. Jahandideh; S. Shafiei Sararoudi; L. Barangi

AIP Conf. Proc. 1713, 020002 (2016) https://doi.org/10.1063/1.4942258

Abstract

View articletitled, Stress relaxation behavior of polyolefin polymer blends based on PP/HDPE

Open the PDF for in another window

Rheological properties comparison between polymer bonded explosives (PBX) and its simulant

Lee Naeun; Kim Youngdae; Song Jaehan; Han Sangkeun; Shim Jeongseob; Lee Keundeuk; Lee Sangmook; Lee Jaewook

AIP Conf. Proc. 1713, 020003 (2016) https://doi.org/10.1063/1.4942259

Abstract

View articletitled, Rheological properties comparison between polymer bonded explosives (PBX) and its simulant

Open the PDF for in another window

G2. EXTRUSION

Development of a new 3D OpenFOAM^® solver to model the cooling stage in profile extrusion

C. Fernandes; F. Habla; O. S. Carneiro; O. Hinrichsen; J. M. Nóbrega

AIP Conf. Proc. 1713, 030001 (2016) https://doi.org/10.1063/1.4942260

Abstract

View articletitled, Development of a new 3D OpenFOAM® solver to model the cooling stage in profile extrusion

Open the PDF for in another window

Coextruded PA-PP pipes: Measurements of the morphology modification due to flame treatment

Jürgen E. K. Schawe; A. Köhler

AIP Conf. Proc. 1713, 030002 (2016) https://doi.org/10.1063/1.4942261

Abstract

View articletitled, Coextruded PA-PP pipes: Measurements of the morphology modification due to flame treatment

Open the PDF for in another window

Scale-up of high performance screw for XPS manufacture

Kun Sup Hyun

AIP Conf. Proc. 1713, 030003 (2016) https://doi.org/10.1063/1.4942262

Abstract

View articletitled, Scale-up of high performance screw for XPS manufacture

Open the PDF for in another window

Comparison between decrosslinking of crosslinked high and low density polyethylenes via ultrasonically aided extrusion

Avraam I. Isayev; Keyuan Huang

AIP Conf. Proc. 1713, 030004 (2016) https://doi.org/10.1063/1.4942263

Abstract

View articletitled, Comparison between decrosslinking of crosslinked high and low density polyethylenes via ultrasonically aided extrusion

Open the PDF for in another window

Novel method of measuring polymer melt viscosity using a short length of single screw extruder at the closed discharge state

Myung-Ho Kim; Bo-Kyung Kim; Seok-Jin Kang; Moon Sung Kim; Sunwoong Choi

AIP Conf. Proc. 1713, 030005 (2016) https://doi.org/10.1063/1.4942264

Abstract

View articletitled, Novel method of measuring polymer melt viscosity using a short length of single screw extruder at the closed discharge state

Open the PDF for in another window

Inline calculation tool for the determination of the changeover time for color and material changes in polymer processing

Michael Burgfeld; Johannes Wortberg

AIP Conf. Proc. 1713, 030006 (2016) https://doi.org/10.1063/1.4942265

Abstract

View articletitled, Inline calculation tool for the determination of the changeover time for color and material changes in polymer processing

Open the PDF for in another window

G3. INJECTION MOLDING

Visualization analysis of tiger-striped flow mark generation phenomena in injection molding

Shigeru Owada; Hidetoshi Yokoi

AIP Conf. Proc. 1713, 040001 (2016) https://doi.org/10.1063/1.4942266

Abstract

View articletitled, Visualization analysis of tiger-striped flow mark generation phenomena in injection molding

Open the PDF for in another window

Supercritical CO₂ assisted electroless plating on polypropylene substrate-effect of injection speed on adhesive force of metal to polymer

Masahiro Ohshima; Kensuke Tsubouchi; Shota Ishihara; Yuta Hikima; Siwach Tengsuwan

AIP Conf. Proc. 1713, 040002 (2016) https://doi.org/10.1063/1.4942267

Abstract

View articletitled, Supercritical CO2 assisted electroless plating on polypropylene substrate-effect of injection speed on adhesive force of metal to polymer

Open the PDF for in another window

Injection molding of high precision optics for LED applications made of liquid silicone rubber

Christian Hopmann; Malte Röbig

AIP Conf. Proc. 1713, 040003 (2016) https://doi.org/10.1063/1.4942268

Abstract

View articletitled, Injection molding of high precision optics for LED applications made of liquid silicone rubber

Open the PDF for in another window

Optimization of injection molding parameters for poly(styrene-isobutylene-styrene) block copolymer

Mauro Fittipaldi; Carla Garcia; Luis A. Rodriguez; Landon R. Grace

AIP Conf. Proc. 1713, 040004 (2016) https://doi.org/10.1063/1.4942269

Abstract

View articletitled, Optimization of injection molding parameters for poly(styrene-isobutylene-styrene) block copolymer

Open the PDF for in another window

Innovative use of wood-plastic-composites (WPC) as a core material in the sandwich injection molding process

Elmar Moritzer; Yannick Martin, M.Sc.

AIP Conf. Proc. 1713, 040005 (2016) https://doi.org/10.1063/1.4942270

Abstract

View articletitled, Innovative use of wood-plastic-composites (WPC) as a core material in the sandwich injection molding process

Open the PDF for in another window

Numerical simulation of fiber interaction in short-fiber injection-molded composite using different cavity geometries

Thanh Binh Nguyen Thi; Atsushi Yokoyama; Senji Hamanaka; Katsuhisa Yamashita; Chisato Nonomura

AIP Conf. Proc. 1713, 040006 (2016) https://doi.org/10.1063/1.4942271

Abstract

View articletitled, Numerical simulation of fiber interaction in short-fiber injection-molded composite using different cavity geometries

Open the PDF for in another window

Prediction of fiber orientation in injection-molded parts using three-dimensional simulations

Jin Wang; Peter Cook; Alex Bakharev; Franco Costa; David Astbury

AIP Conf. Proc. 1713, 040007 (2016) https://doi.org/10.1063/1.4942272

Abstract

View articletitled, Prediction of fiber orientation in injection-molded parts using three-dimensional simulations

Open the PDF for in another window

Visualization analysis of injection molding phenomena in hot-runner system

Hidetoshi Yokoi; Yoshinori Kanetoh; Ryohei Takamatsu; Takumi Endo; Hao Chang; Toru Chayamichi

AIP Conf. Proc. 1713, 040008 (2016) https://doi.org/10.1063/1.4942273

Abstract

View articletitled, Visualization analysis of injection molding phenomena in hot-runner system

Open the PDF for in another window

A concept for non-invasive temperature measurement during injection moulding processes

Christian Hopmann; Marcel Spekowius; Jens Wipperfürth; Maximilian Schöngart

AIP Conf. Proc. 1713, 040009 (2016) https://doi.org/10.1063/1.4942274

Abstract

View articletitled, A concept for non-invasive temperature measurement during injection moulding processes

Open the PDF for in another window

Analysis of batch-related influences on injection molding processes viewed in the context of electro plating quality demands

Jens P. Siepmann; Johannes Wortberg; Felix A. Heinzler

AIP Conf. Proc. 1713, 040010 (2016) https://doi.org/10.1063/1.4942275

Abstract

View articletitled, Analysis of batch-related influences on injection molding processes viewed in the context of electro plating quality demands

Open the PDF for in another window

Investigation of interfacial fracture behavior on injection molded parts

Matthieu Fischer; Gilles Ausias; Ines Kuehnert

AIP Conf. Proc. 1713, 040011 (2016) https://doi.org/10.1063/1.4942276

Abstract

View articletitled, Investigation of interfacial fracture behavior on injection molded parts

Open the PDF for in another window

G4. POLYMER BLENDS AND ALLOYS

Processing and properties of thermoplastics elastomers based on recycled polyethylene and EPDM

Denis Rodrigue; Sébastien Champagne

AIP Conf. Proc. 1713, 050001 (2016) https://doi.org/10.1063/1.4942277

Abstract

View articletitled, Processing and properties of thermoplastics elastomers based on recycled polyethylene and EPDM

Open the PDF for in another window

Crystallization behavior and thermal stability of poly(butylene succinate)/poly(propylene carbonate) blends prepared by novel vane extruder

Rongyuan Chen; Wei Zou; Haichen Zhang; Guizhen Zhang; Jinping Qu

AIP Conf. Proc. 1713, 050002 (2016) https://doi.org/10.1063/1.4942278

Abstract

View articletitled, Crystallization behavior and thermal stability of poly(butylene succinate)/poly(propylene carbonate) blends prepared by novel vane extruder

Open the PDF for in another window

Preparation, melting behavior and thermal stability of poly(lactic acid)/poly(propylene carbonate) blends processed by vane extruder

Wei Zou; Rongyuan Chen; Haichen Zhang; Jinping Qu

AIP Conf. Proc. 1713, 050003 (2016) https://doi.org/10.1063/1.4942279

Abstract

View articletitled, Preparation, melting behavior and thermal stability of poly(lactic acid)/poly(propylene carbonate) blends processed by vane extruder

Open the PDF for in another window

Morphology and properties of PBT/SEBS and PBT/SEBS-G-MAH blends

Xiang Lu; Jinping Qu

AIP Conf. Proc. 1713, 050004 (2016) https://doi.org/10.1063/1.4942280

Abstract

View articletitled, Morphology and properties of PBT/SEBS and PBT/SEBS-G-MAH blends

Open the PDF for in another window

Rheological properties of PP/CaCO₃ micron-nano composite blends processing based on elongation rheology via vane extruder

Kang Benhao; Chen Rongyuan; Zhang Guizhen; Yang Zhitao; Qu Jinping

AIP Conf. Proc. 1713, 050005 (2016) https://doi.org/10.1063/1.4942281

Abstract

View articletitled, Rheological properties of PP/CaCO3 micron-nano composite blends processing based on elongation rheology via vane extruder

Open the PDF for in another window

Mechanical properties of PP/PA blends in addition with PP-g-MAH with different PP molecular weight and MAH content

Katuhisa Tokumitsu; Yuki Nakajima; Kenji Aoki

AIP Conf. Proc. 1713, 050006 (2016) https://doi.org/10.1063/1.4942282

Abstract

View articletitled, Mechanical properties of PP/PA blends in addition with PP-g-MAH with different PP molecular weight and MAH content

Open the PDF for in another window

Concept of reactive compatibilizer-tracer for discovering interfacial reaction and morphology development for in-situ compatibilizing blending processes

Wei-Yun Ji; Lian-Fang Feng; Cai-Liang Zhang; Guo-Hua Hu

AIP Conf. Proc. 1713, 050007 (2016) https://doi.org/10.1063/1.4942283

Abstract

View articletitled, Concept of reactive compatibilizer-tracer for discovering interfacial reaction and morphology development for in-situ compatibilizing blending processes

Open the PDF for in another window

G5. MIXING AND COMPOUNDING

Toughening of poly(lactic acid) without sacrificing stiffness and strength by melt-blending with polyamide 11 and selective localization of halloysite nanotubes

Baralu Jagannatha Rashmi; Kalappa Prashantha; Marie-France Lacrampe; Patricia Krawczak

AIP Conf. Proc. 1713, 060001 (2016) https://doi.org/10.1063/1.4942284

Abstract

View articletitled, Toughening of poly(lactic acid) without sacrificing stiffness and strength by melt-blending with polyamide 11 and selective localization of halloysite nanotubes

Open the PDF for in another window

The effect of silane addition timing on mixing processability and properties of silica reinforced rubber compound

Hee-Hoon Jeong; Hyun-Ho Jin; Sung-Ho Ha; Suk-Hee Jang; Yong-Gu Kang; Min-Hyun Han

AIP Conf. Proc. 1713, 060002 (2016) https://doi.org/10.1063/1.4942285

Abstract

View articletitled, The effect of silane addition timing on mixing processability and properties of silica reinforced rubber compound

Open the PDF for in another window

Comparison analysis on the properties of the phosphor film according to the various composition ratio of phosphor slurry

Jeong Yeon Park; Jeong Won Lee; Young Moo Heo; Si Tae Won; Gil Sang Yoon

AIP Conf. Proc. 1713, 060003 (2016) https://doi.org/10.1063/1.4942286

Abstract

View articletitled, Comparison analysis on the properties of the phosphor film according to the various composition ratio of phosphor slurry

Open the PDF for in another window

G6. MORPHOLOGY AND STRUCTURAL DEVELOPMENT

Influence of calcium carbonate and carbon nanotubes on the crystallization kinetics of polypropylene at high supercooling

Jürgen E. K. Schawe

AIP Conf. Proc. 1713, 070001 (2016) https://doi.org/10.1063/1.4942287

Abstract

View articletitled, Influence of calcium carbonate and carbon nanotubes on the crystallization kinetics of polypropylene at high supercooling

Open the PDF for in another window

Process induced morphology of irradiated HD-PE

Regine Boldt; Uwe Gohs; Manfred Stamm; Gert Heinrich

AIP Conf. Proc. 1713, 070002 (2016) https://doi.org/10.1063/1.4942288

Abstract

View articletitled, Process induced morphology of irradiated HD-PE

Open the PDF for in another window

Design and scale-up of a semi-industrial downer-reactor for the rounding of irregular polymer particles

Marius Sachs; Jochen Schmidt; Wolfgang Peukert; Karl-Ernst Wirth

AIP Conf. Proc. 1713, 070003 (2016) https://doi.org/10.1063/1.4942289

Abstract

View articletitled, Design and scale-up of a semi-industrial downer-reactor for the rounding of irregular polymer particles

Open the PDF for in another window

G7. FILMS AND FIBERS

Differential-Integral method in polymer processing: Taking melt electrospinning technique for example

Li Haoyi; Yang Weimin; Chen Hongbo; Tan Jing; Xie Pengcheng

AIP Conf. Proc. 1713, 080001 (2016) https://doi.org/10.1063/1.4942290

Abstract

View articletitled, Differential-Integral method in polymer processing: Taking melt electrospinning technique for example

Open the PDF for in another window

Mutual interaction between high and low stereo-regularity components for crystallization and melting behaviors of polypropylene blend fibers

Kouya Kawai; Youhei Kohri; Wataru Takarada; Tomoaki Takebe; Toshitaka Kanai; Takeshi Kikutani

AIP Conf. Proc. 1713, 080002 (2016) https://doi.org/10.1063/1.4942291

Abstract

View articletitled, Mutual interaction between high and low stereo-regularity components for crystallization and melting behaviors of polypropylene blend fibers

Open the PDF for in another window

Characterization of the crystal orientation in mono-oriented films of HDPE/LLDPE blends by IR dichroism

Sebastião V. Canevarolo; Marcelo Elias; Camila Ravazzi; Jorge Silva

AIP Conf. Proc. 1713, 080003 (2016) https://doi.org/10.1063/1.4942292

Abstract

View articletitled, Characterization of the crystal orientation in mono-oriented films of HDPE/LLDPE blends by IR dichroism

Open the PDF for in another window

Solid state rheology of polymer films and layers: Influence of the thickness on mechanical properties of a PU-adhesive between metallic substrate

Jürgen E. K. Schawe; W. Possart; L. Krogh

AIP Conf. Proc. 1713, 080004 (2016) https://doi.org/10.1063/1.4942293

Abstract

View articletitled, Solid state rheology of polymer films and layers: Influence of the thickness on mechanical properties of a PU-adhesive between metallic substrate

Open the PDF for in another window

Thermal and mechanical properties of bioplastic poly(lactic acid) compounded with silicone rubber and talc

Thidarat Khuenkeao; Nawadon Petchwattana; Sirijutaratana Covavisaruch

AIP Conf. Proc. 1713, 080005 (2016) https://doi.org/10.1063/1.4942294

Abstract

View articletitled, Thermal and mechanical properties of bioplastic poly(lactic acid) compounded with silicone rubber and talc

Open the PDF for in another window

Matrigel immobilization on the shish-kebab structured poly(ε-caprolactone) nanofibers for skin tissue engineering

Xin Jing; Hao-Yang Mi; Xiang-Fang Peng; Lih-Sheng Turng

AIP Conf. Proc. 1713, 080006 (2016) https://doi.org/10.1063/1.4942295

Abstract

View articletitled, Matrigel immobilization on the shish-kebab structured poly(ε-caprolactone) nanofibers for skin tissue engineering

Open the PDF for in another window

An experimental comparison between a novel and a conventional cooling system for the blown film process

M. Janas; M. Andretzky; B. Neubert; F. Kracht; J. Wortberg

AIP Conf. Proc. 1713, 080007 (2016) https://doi.org/10.1063/1.4942296

Abstract

View articletitled, An experimental comparison between a novel and a conventional cooling system for the blown film process

Open the PDF for in another window

G8. POLYMER NANOSTRUCTURES AND NANOCOMPOSITES

Strain sensing conductive polymer composites: Sensitivity and stability

Hua Deng; Rongni Du; Linyan Duan; Qiang Fu

AIP Conf. Proc. 1713, 090001 (2016) https://doi.org/10.1063/1.4942297

Abstract

View articletitled, Strain sensing conductive polymer composites: Sensitivity and stability

Open the PDF for in another window

Correlation between crystallization behaviour and interfacial interactions in plasticized PLA/POSS nanocomposites

Mehmet Kodal; Hümeyra Şirin; Güralp Özkoç

AIP Conf. Proc. 1713, 090002 (2016) https://doi.org/10.1063/1.4942298

Abstract

View articletitled, Correlation between crystallization behaviour and interfacial interactions in plasticized PLA/POSS nanocomposites

Open the PDF for in another window

Tribological properties of nanosized calcium carbonate filled polyamide 66 nanocomposites

Kaito Itagaki; Yosuke Nishitani; Takeshi Kitano; Kenichiro Eguchi

AIP Conf. Proc. 1713, 090003 (2016) https://doi.org/10.1063/1.4942299

Abstract

View articletitled, Tribological properties of nanosized calcium carbonate filled polyamide 66 nanocomposites

Open the PDF for in another window

Adsorption of ionic liquid onto halloysite nanotubes: Thermal and mechanical properties of heterophasic PE-PP copolymer nanocomposites

E. Bischoff; D. A. Simon; S. A. Liberman; R. S. Mauler

AIP Conf. Proc. 1713, 090004 (2016) https://doi.org/10.1063/1.4942300

Abstract

View articletitled, Adsorption of ionic liquid onto halloysite nanotubes: Thermal and mechanical properties of heterophasic PE-PP copolymer nanocomposites

Open the PDF for in another window

An investigation on morphology and mechanical properties of HDPE/nanoclay/nanoCaCO₃ ternary nanocomposites

Hamid Garmabi; Seyed Emad Alavi Tabari; Azizeh Javadi; Hormoz Behrouzi; Gholamabbas Hosseini

AIP Conf. Proc. 1713, 090005 (2016) https://doi.org/10.1063/1.4942301

Abstract

View articletitled, An investigation on morphology and mechanical properties of HDPE/nanoclay/nanoCaCO3 ternary nanocomposites

Open the PDF for in another window

Structural and mechanical behaviour of LLDPE/HNT nanocomposite films

M. Čermák; P. Kadlec; P. Šutta; R. Polanský

AIP Conf. Proc. 1713, 090006 (2016) https://doi.org/10.1063/1.4942302

Abstract

View articletitled, Structural and mechanical behaviour of LLDPE/HNT nanocomposite films

Open the PDF for in another window

Dielectric analysis of halloysite nanotubes LLDPE nanocomposite compounds

M. Čermák; P. Kadlec; Z. Kruliš; R. Polanský

AIP Conf. Proc. 1713, 090007 (2016) https://doi.org/10.1063/1.4942303

Abstract

View articletitled, Dielectric analysis of halloysite nanotubes LLDPE nanocomposite compounds

Open the PDF for in another window

Grafting of sodium montmorillonite with γ-aminopropyltriethoxysilane in ethanol/water dispersing medium

Mohammad Asgari; Ahmed Abouelmagd; Uttandaraman Sundararaj

AIP Conf. Proc. 1713, 090008 (2016) https://doi.org/10.1063/1.4942304

Abstract

View articletitled, Grafting of sodium montmorillonite with γ-aminopropyltriethoxysilane in ethanol/water dispersing medium

Open the PDF for in another window

Interfaces in polymer nanocomposites – An NMR study

Ute Böhme; Ulrich Scheler

AIP Conf. Proc. 1713, 090009 (2016) https://doi.org/10.1063/1.4942305

Abstract

View articletitled, Interfaces in polymer nanocomposites – An NMR study

Open the PDF for in another window

G9. FOAM

Microcellular foam injection molding with cellulose nanofibers (CNFs)

Masahiro Ohshima; Masaya Kubota; Shota Ishihara; Yuta Hikima; Akihiro Sato; Takafumi Sekiguchi

AIP Conf. Proc. 1713, 100001 (2016) https://doi.org/10.1063/1.4942306

Abstract

View articletitled, Microcellular foam injection molding with cellulose nanofibers (CNFs)

Open the PDF for in another window

Polypropylenes foam consisting of thermally expandable microcapsule as blowing agent

Sun Kyung Jeoung; Ye Jin Hwang; Hyun Wook Lee; Sung Bok Kwak; In-Soo Han; Jin Uk Ha

AIP Conf. Proc. 1713, 100002 (2016) https://doi.org/10.1063/1.4942307

Abstract

View articletitled, Polypropylenes foam consisting of thermally expandable microcapsule as blowing agent

Open the PDF for in another window

Extrusion foaming of protein-based thermoplastic and polyethylene blends

Chanelle Gavin; Mark C. Lay; Casparus J. R. Verbeek

AIP Conf. Proc. 1713, 100003 (2016) https://doi.org/10.1063/1.4942308

Abstract

View articletitled, Extrusion foaming of protein-based thermoplastic and polyethylene blends

Open the PDF for in another window

Bioplastic composite foam prepared from poly(lactic acid) and natural wood flour

Pokkes Suwannakas; Nawadon Petrchwattana; Sirijutaratana Covavisaruch

AIP Conf. Proc. 1713, 100004 (2016) https://doi.org/10.1063/1.4942309

Abstract

View articletitled, Bioplastic composite foam prepared from poly(lactic acid) and natural wood flour

Open the PDF for in another window

Foam injection molding of polypropylene/stainless steel fiber composites for efficient EMI shielding

A. Ameli; M. Nofar; M. Saniei; S. Wang; C. B. Park

AIP Conf. Proc. 1713, 100005 (2016) https://doi.org/10.1063/1.4942310

Abstract

View articletitled, Foam injection molding of polypropylene/stainless steel fiber composites for efficient EMI shielding

Open the PDF for in another window

Blending Novatein^® thermoplastic protein with PLA for carbon dioxide assisted batch foaming

Anuradha Walallavita; Casparus J. R. Verbeek; Mark Lay

AIP Conf. Proc. 1713, 100006 (2016) https://doi.org/10.1063/1.4942311

Abstract

View articletitled, Blending Novatein® thermoplastic protein with PLA for carbon dioxide assisted batch foaming

Open the PDF for in another window

G10. MODELLING AND SIMULATION

Determination of the strain rate dependent thermal softening behavior of thermoplastic materials for crash simulations

Christian Hopmann; Jan Klein; Maximilian Schöngart

AIP Conf. Proc. 1713, 110001 (2016) https://doi.org/10.1063/1.4942312

Abstract

View articletitled, Determination of the strain rate dependent thermal softening behavior of thermoplastic materials for crash simulations

Open the PDF for in another window

Processing biobased polymers using plasticizers: Numerical simulations versus experiments

Frederik Desplentere; Ludwig Cardon; Wim Six; Mustafa Erkoç

AIP Conf. Proc. 1713, 110002 (2016) https://doi.org/10.1063/1.4942313

Abstract

View articletitled, Processing biobased polymers using plasticizers: Numerical simulations versus experiments

Open the PDF for in another window

Discrete element simulations and validation tests investigating solids-conveying processes with pressure buildup in single screw extruders

Johann-Sebastian Lessmann; Volker Schoeppner

AIP Conf. Proc. 1713, 110003 (2016) https://doi.org/10.1063/1.4942314

Abstract

View articletitled, Discrete element simulations and validation tests investigating solids-conveying processes with pressure buildup in single screw extruders

Open the PDF for in another window

Investigation of the cure kinetics of an epoxy resin by advanced isoconversional and model-fitting methods

A. Hosseinpour; H. Nazockdast; T. Behzad; H. R. SalimiJazi

AIP Conf. Proc. 1713, 110004 (2016) https://doi.org/10.1063/1.4942315

Abstract

View articletitled, Investigation of the cure kinetics of an epoxy resin by advanced isoconversional and model-fitting methods

Open the PDF for in another window

G11. POLYMER COMPOSITES

The effect of epoxidized soybean oil on mechanical and rheological properties of poly(butylene succinate)/lignin via vane extruder

Huanyu Liu; Zhaoxia Huang; Jinping Qu; Cong Meng

AIP Conf. Proc. 1713, 120001 (2016) https://doi.org/10.1063/1.4942316

Abstract

View articletitled, The effect of epoxidized soybean oil on mechanical and rheological properties of poly(butylene succinate)/lignin via vane extruder

Open the PDF for in another window

Preparation and properties of PA6/CSW composites via vane extruder

Zhang Haichen; Li Jianbo; Yang Li; Zhang Guizhen; Qu Jinping

AIP Conf. Proc. 1713, 120002 (2016) https://doi.org/10.1063/1.4942317

Abstract

View articletitled, Preparation and properties of PA6/CSW composites via vane extruder

Open the PDF for in another window

Thermal and mechanical properties of TPU/PBT reinforced by carbon fiber

Jintao Huang; Huanyu Liu; Xiang Lu; Jinping Qu

AIP Conf. Proc. 1713, 120003 (2016) https://doi.org/10.1063/1.4942318

Abstract

View articletitled, Thermal and mechanical properties of TPU/PBT reinforced by carbon fiber

Open the PDF for in another window

Toughening of wood plastic composite based on X-PP

U. Meekum; A. Khongrit

AIP Conf. Proc. 1713, 120004 (2016) https://doi.org/10.1063/1.4942319

Abstract

View articletitled, Toughening of wood plastic composite based on X-PP

Open the PDF for in another window

Development of wood-plastic composites based on wood particles and dried blood

Frauke M. Reinders; Elena Sabanov; Wolfgang Bremser; Volker Schöppner

AIP Conf. Proc. 1713, 120005 (2016) https://doi.org/10.1063/1.4942320

Abstract

View articletitled, Development of wood-plastic composites based on wood particles and dried blood

Open the PDF for in another window

Mechanical properties of micro-injected HDPE composites

A. Bongiorno; C. Pagano; S. Agnelli; F. Baldi; I. Fassi

AIP Conf. Proc. 1713, 120006 (2016) https://doi.org/10.1063/1.4942321

Abstract

View articletitled, Mechanical properties of micro-injected HDPE composites

Open the PDF for in another window

Thermal properties of hemp fiber filled polyamide 1010 biomass composites and the blend of these composites and polyamide 11 elastomer

Yosuke Nishitani; Jun Mukaida; Toshiyuki Yamanaka; Tetsuto Kajiyama; Takeshi Kitano

AIP Conf. Proc. 1713, 120007 (2016) https://doi.org/10.1063/1.4942322

Abstract

View articletitled, Thermal properties of hemp fiber filled polyamide 1010 biomass composites and the blend of these composites and polyamide 11 elastomer

Open the PDF for in another window

Effects of surface modification of talc on mechanical properties of polypropylene/talc composites

Keyan Liu; Wolfgang Stadlbauer; Gernot Zitzenbacher; Christian Paulik; Christoph Burgstaller

AIP Conf. Proc. 1713, 120008 (2016) https://doi.org/10.1063/1.4942323

Abstract

View articletitled, Effects of surface modification of talc on mechanical properties of polypropylene/talc composites

Open the PDF for in another window

Influence of processing sequence on the tribological properties of VGCF-X/PA6/SEBS composites

Yu Osada; Yosuke Nishitani; Takeshi Kitano

AIP Conf. Proc. 1713, 120009 (2016) https://doi.org/10.1063/1.4942324

Abstract

View articletitled, Influence of processing sequence on the tribological properties of VGCF-X/PA6/SEBS composites

Open the PDF for in another window

The coupled effect of fiber volume fraction and void fraction on hydraulic fluid absorption of quartz/BMI laminates

Keith R. Hurdelbrink, II; Jacob P. Anderson; Zahed Siddique; M. Cengiz Altan

AIP Conf. Proc. 1713, 120010 (2016) https://doi.org/10.1063/1.4942325

Abstract

View articletitled, The coupled effect of fiber volume fraction and void fraction on hydraulic fluid absorption of quartz/BMI laminates

Open the PDF for in another window

Rheological and mechanical properties of highly filled polyolefin based on PP/barium sulfate

F. Kohandel; S. Shafiei Sararoudi; L. Barangi

AIP Conf. Proc. 1713, 120011 (2016) https://doi.org/10.1063/1.4942326

Abstract

View articletitled, Rheological and mechanical properties of highly filled polyolefin based on PP/barium sulfate

Open the PDF for in another window

Experimental and theoretical investigation of non-Fickian moisture absorption of quartz/BMI laminates fabricated by preconditioned prepregs

Gorkem E. Guloglu; Keith R. Hurdelbrink, II; Jacob P. Anderson; M. Cengiz Altan

AIP Conf. Proc. 1713, 120012 (2016) https://doi.org/10.1063/1.4942327

Abstract

View articletitled, Experimental and theoretical investigation of non-Fickian moisture absorption of quartz/BMI laminates fabricated by preconditioned prepregs

Open the PDF for in another window

Mechanical recycling of continuous fiber-reinforced thermoplastic sheets

Elmar Moritzer; Gilmar Heiderich

AIP Conf. Proc. 1713, 120013 (2016) https://doi.org/10.1063/1.4942328

Abstract

View articletitled, Mechanical recycling of continuous fiber-reinforced thermoplastic sheets

Open the PDF for in another window

Flame retardancy and thermal stability of polyurethane foam composites containing carbon additives

Pyoung-Chan Lee; Bo-Ram Kim; Sun Kyoung Jeoung; Geesoo Lee; San Wook Han; Hyunchul Kim; Ki-Dong Lee; Joo-Kwon Han

AIP Conf. Proc. 1713, 120014 (2016) https://doi.org/10.1063/1.4942329

Abstract

View articletitled, Flame retardancy and thermal stability of polyurethane foam composites containing carbon additives

Open the PDF for in another window

Electromagnetic interference shielding effectiveness of polypropylene/conducting fiber composites

Pyoung-Chan Lee; Bo-Ram Kim; Sun Kyoung Jeoung; Yeung Keun Kim

AIP Conf. Proc. 1713, 120015 (2016) https://doi.org/10.1063/1.4942330

Abstract

View articletitled, Electromagnetic interference shielding effectiveness of polypropylene/conducting fiber composites

Open the PDF for in another window

Study on properties of CFRP fabricated by VA-RTM process

Sun Kyoung Jeoung; Ye Jin Hwang; Hyun Wook Lee; Soon Keun Son; Hyung Sik Kim; Jin Uk Ha

AIP Conf. Proc. 1713, 120016 (2016) https://doi.org/10.1063/1.4942331

Abstract

View articletitled, Study on properties of CFRP fabricated by VA-RTM process

Open the PDF for in another window

Reversible dielectric property degradation in moisture-contaminated fiber-reinforced laminates

Luis A. Rodriguez; Carla García; Mauro Fittipaldi; Landon R. Grace

AIP Conf. Proc. 1713, 120017 (2016) https://doi.org/10.1063/1.4942332

Abstract

View articletitled, Reversible dielectric property degradation in moisture-contaminated fiber-reinforced laminates

Open the PDF for in another window

G12. RUBBER PROCESSING AND TECHNOLOGY

Preparation of vinyl acetate grafted natural rubber by irradiation method

A. Porntrairat; C. Pattamaprom

AIP Conf. Proc. 1713, 130001 (2016) https://doi.org/10.1063/1.4942333

Abstract

View articletitled, Preparation of vinyl acetate grafted natural rubber by irradiation method

Open the PDF for in another window

Energy saving curing and precision manufacturing technology of tires

Jinyun Zhang; Jing Tan; Xiaoying Liu; Weimin Yang

AIP Conf. Proc. 1713, 130002 (2016) https://doi.org/10.1063/1.4942334

Abstract

View articletitled, Energy saving curing and precision manufacturing technology of tires

Open the PDF for in another window

Investigations of the mixing behaviour of pin-type rubber extruders

Volker Schöppner; Michael Schadomsky; Christian Hopmann; Florian Lemke

AIP Conf. Proc. 1713, 130003 (2016) https://doi.org/10.1063/1.4942335

Abstract

View articletitled, Investigations of the mixing behaviour of pin-type rubber extruders

Open the PDF for in another window

G13. ADVANCED POLYMER MATERIALS

Epoxy adhesive formulations for engineered wood manufacturing: Design of Experiment (DOE) and hardener modification

W. Wangkheeree; U. Meekum

AIP Conf. Proc. 1713, 140001 (2016) https://doi.org/10.1063/1.4942336

Abstract

View articletitled, Epoxy adhesive formulations for engineered wood manufacturing: Design of Experiment (DOE) and hardener modification

Open the PDF for in another window

Polymeric additives for antistatic treatment of sheet molding composites (SMC)

Michaela Gedan-Smolka; Katrin Schubert; Antje Taeger; Hagen Marks

AIP Conf. Proc. 1713, 140002 (2016) https://doi.org/10.1063/1.4942337

Abstract

View articletitled, Polymeric additives for antistatic treatment of sheet molding composites (SMC)

Open the PDF for in another window

Residual stresses in injection molded shape memory polymer parts

Sukran Katmer; Huseyin Esen; Cetin Karatas

AIP Conf. Proc. 1713, 140003 (2016) https://doi.org/10.1063/1.4942338

Abstract

View articletitled, Residual stresses in injection molded shape memory polymer parts

Open the PDF for in another window

Lap shear strength and healing capability of self-healing adhesive containing epoxy/mercaptan microcapsules

Habibah Ghazali; Lin Ye; Ming-Qiu Zhang

AIP Conf. Proc. 1713, 140004 (2016) https://doi.org/10.1063/1.4942339

Abstract

View articletitled, Lap shear strength and healing capability of self-healing adhesive containing epoxy/mercaptan microcapsules

Open the PDF for in another window

Amine-functionalized macroporous microspheres for HF removal from aqueous solution

Sang Goo Lee; Jong-Wook Ha; Bong Jun Chang

AIP Conf. Proc. 1713, 140005 (2016) https://doi.org/10.1063/1.4942340

Abstract

View articletitled, Amine-functionalized macroporous microspheres for HF removal from aqueous solution

Open the PDF for in another window

High T_g and fast curing epoxy-based anisotropic conductive paste for electronic packaging

Waralee Keeratitham; Anongnat Somwangthanaroj

AIP Conf. Proc. 1713, 140006 (2016) https://doi.org/10.1063/1.4942341

Abstract

View articletitled, High Tg and fast curing epoxy-based anisotropic conductive paste for electronic packaging

Open the PDF for in another window

Production of micron-sized polymer particles for additive manufacturing by melt emulsification

Stephanie Fanselow; Jochen Schmidt; Karl-Ernst Wirth; Wolfgang Peukert

AIP Conf. Proc. 1713, 140007 (2016) https://doi.org/10.1063/1.4942342

Abstract

View articletitled, Production of micron-sized polymer particles for additive manufacturing by melt emulsification

Open the PDF for in another window

A novel process for production of spherical PBT powders and their processing behavior during laser beam melting

Jochen Schmidt; Marius Sachs; Meng Zhao; Stephanie Fanselow; Katrin Wudy; Maximilian Drexler; Dietmar Drummer; Karl-Ernst Wirth; Wolfgang Peukert

AIP Conf. Proc. 1713, 140008 (2016) https://doi.org/10.1063/1.4942343

Abstract

View articletitled, A novel process for production of spherical PBT powders and their processing behavior during laser beam melting

Open the PDF for in another window

Novel multiphase systems based on thermoplastic chitosan: Analysis of the structure-properties relationships

Luc Avérous; Eric Pollet

AIP Conf. Proc. 1713, 140009 (2016) https://doi.org/10.1063/1.4942344

Abstract

View articletitled, Novel multiphase systems based on thermoplastic chitosan: Analysis of the structure-properties relationships

Open the PDF for in another window

S1. ADVANCED COATING/PRINTING TECHNOLOGY

Investigations of the surface activation of thermoplastic polymers by atmospheric pressure plasma treatment with a stationary plasma jet

Elmar Moritzer; Timo Nordmeyer; Christian Leister; Martin Andreas Schmidt; Artur Grishin; Alexander Knospe

AIP Conf. Proc. 1713, 150001 (2016) https://doi.org/10.1063/1.4942345

Abstract

View articletitled, Investigations of the surface activation of thermoplastic polymers by atmospheric pressure plasma treatment with a stationary plasma jet

Open the PDF for in another window

Frequency response of slot coating flow to gap disturbances

Semi Lee; Jaewook Nam

AIP Conf. Proc. 1713, 150002 (2016) https://doi.org/10.1063/1.4942346

Abstract

View articletitled, Frequency response of slot coating flow to gap disturbances

Open the PDF for in another window

Calculating interface curvature and contact angle with NURBS for coating flow analysis

Hyeyoung Hong; Jaewook Nam

AIP Conf. Proc. 1713, 150003 (2016) https://doi.org/10.1063/1.4942347

Abstract

View articletitled, Calculating interface curvature and contact angle with NURBS for coating flow analysis

Open the PDF for in another window

S2. ADVANCED ELECTRONICS/DISPLAY MATERIALS AND PROCESSING

Research on electromagnetic interference shielding effectiveness of sisal fiber/carbon black/HDPE composites by tri-screw extrusion molding

Li-Ying Zhou; Ming-Chun Wu; Zhao-Xia Huang; He-Zhi He

AIP Conf. Proc. 1713, 160001 (2016) https://doi.org/10.1063/1.4942348

Abstract

View articletitled, Research on electromagnetic interference shielding effectiveness of sisal fiber/carbon black/HDPE composites by tri-screw extrusion molding

Open the PDF for in another window

Research on properties of carbon black/polypropylene composites by dynamic injection molding

Ming-Chun Wu; Guang-Jian He; Zhao-Xia Huang; Li-Ying Zhou; He-Zhi He

AIP Conf. Proc. 1713, 160002 (2016) https://doi.org/10.1063/1.4942349

Abstract

View articletitled, Research on properties of carbon black/polypropylene composites by dynamic injection molding

Open the PDF for in another window

S4. HONORARY SESSION FOR PROF. SUNG CHUL KIM

Effect of fast mold surface temperature evolution on iPP part morphology gradients

Sara Liparoti; Andrea Sorrentino; Gustavo Guzman; Mukerrem Cakmak; Giuseppe Titomanlio

AIP Conf. Proc. 1713, 170001 (2016) https://doi.org/10.1063/1.4942350

Abstract

View articletitled, Effect of fast mold surface temperature evolution on iPP part morphology gradients

Open the PDF for in another window

Issues

PRELIMINARY

G1. RHEOLOGY AND RHEOMETRY

G2. EXTRUSION

G3. INJECTION MOLDING

G4. POLYMER BLENDS AND ALLOYS

G5. MIXING AND COMPOUNDING

G6. MORPHOLOGY AND STRUCTURAL DEVELOPMENT

G7. FILMS AND FIBERS

G8. POLYMER NANOSTRUCTURES AND NANOCOMPOSITES

G9. FOAM

G10. MODELLING AND SIMULATION

G11. POLYMER COMPOSITES

G12. RUBBER PROCESSING AND TECHNOLOGY

G13. ADVANCED POLYMER MATERIALS

S1. ADVANCED COATING/PRINTING TECHNOLOGY

S2. ADVANCED ELECTRONICS/DISPLAY MATERIALS AND PROCESSING

S4. HONORARY SESSION FOR PROF. SUNG CHUL KIM

RSS

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

This Feature Is Available To Subscribers Only