Skip Nav Destination
Issues
10 February 2016
In this Issue
PRELIMINARY
SELECTED PAPERS
Precision measurement of crack closure state with vibrothermography
AIP Conf. Proc. 1706, 020004 (2016)
https://doi.org/10.1063/1.4940450
SAFE-3D analysis of a piezoelectric transducer to excite guided waves in a rail web
AIP Conf. Proc. 1706, 020005 (2016)
https://doi.org/10.1063/1.4940451
Conclusions of the 6th European American Workshop on reliability of NDE
AIP Conf. Proc. 1706, 020006 (2016)
https://doi.org/10.1063/1.4940452
Quantitative ultrasonic evaluation of concrete structures using one-sided access
AIP Conf. Proc. 1706, 020007 (2016)
https://doi.org/10.1063/1.4940453
Failure prediction in ceramic composites using acoustic emission and digital image correlation
AIP Conf. Proc. 1706, 020008 (2016)
https://doi.org/10.1063/1.4940454
Plane wave imaging for ultrasonic inspection of irregular structures with high frame rates
AIP Conf. Proc. 1706, 020010 (2016)
https://doi.org/10.1063/1.4940456
Improved synthetic aperture focusing technique results of thick concrete specimens through frequency banding
AIP Conf. Proc. 1706, 020012 (2016)
https://doi.org/10.1063/1.4940458
Inspection of a large concrete block containing embedded defects using ground penetrating radar
AIP Conf. Proc. 1706, 020014 (2016)
https://doi.org/10.1063/1.4940460
Reconstruction of wave features in wind-driven water film flow using ultrasonic pulse-echo technique
AIP Conf. Proc. 1706, 020015 (2016)
https://doi.org/10.1063/1.4940461
Optimization of element length for imaging small volumetric reflectors with linear ultrasonic arrays
AIP Conf. Proc. 1706, 020016 (2016)
https://doi.org/10.1063/1.4940462
Characterization of concrete at various freeze-thaw damage conditions using SH-waves
AIP Conf. Proc. 1706, 020017 (2016)
https://doi.org/10.1063/1.4940463
Development of adapted GMR-probes for automated detection of hidden defects in thin steel sheets
AIP Conf. Proc. 1706, 020018 (2016)
https://doi.org/10.1063/1.4940464
Non-intrusive measurement of inner bore temperature of small arms using integrated ultrasonic transducers
AIP Conf. Proc. 1706, 020019 (2016)
https://doi.org/10.1063/1.4940465
Shear horizontal ultrasonic waves excited by piezoelectric fiber patches
AIP Conf. Proc. 1706, 020022 (2016)
https://doi.org/10.1063/1.4940468
Enhanced nonlinear inspection of diffusion bonded interfaces using reflected non-collinear ultrasonic wave mixing
AIP Conf. Proc. 1706, 020023 (2016)
https://doi.org/10.1063/1.4940469
Experimental validation of an eddy current probe for defect detection in thick conducting specimen
AIP Conf. Proc. 1706, 020025 (2016)
https://doi.org/10.1063/1.4940471
Multi-scale radiographic applications in microelectronic industry
AIP Conf. Proc. 1706, 020026 (2016)
https://doi.org/10.1063/1.4940472
CHAPTER 1 ULTRASONICS: GUIDED WAVES
Characterization of guided wave velocity and attenuation in anisotropic materials from wavefield measurements
AIP Conf. Proc. 1706, 030002 (2016)
https://doi.org/10.1063/1.4940474
Guided wave propagation in metallic and resin plates loaded with water on single surface
AIP Conf. Proc. 1706, 030003 (2016)
https://doi.org/10.1063/1.4940475
Advanced signal processing methods applied to guided waves for wire rope defect detection
AIP Conf. Proc. 1706, 030006 (2016)
https://doi.org/10.1063/1.4940478
Noncontact excitation of guided waves (A0 mode) using an electromagnetic acoustic transducer (EMAT)
AIP Conf. Proc. 1706, 030007 (2016)
https://doi.org/10.1063/1.4940479
Dispersive matched filtering of ultrasonic guided waves for improved sparse array damage localization
AIP Conf. Proc. 1706, 030008 (2016)
https://doi.org/10.1063/1.4940480
Multidimensional guided wave dispersion recovery for locating defects in composite materials
AIP Conf. Proc. 1706, 030009 (2016)
https://doi.org/10.1063/1.4940481
PVDF array sensor for Lamb wave reception: Aircraft structural health monitoring
AIP Conf. Proc. 1706, 030011 (2016)
https://doi.org/10.1063/1.4940483
Feature guided waves (FGW) in fiber reinforced composite plates with 90° transverse bends
AIP Conf. Proc. 1706, 030016 (2016)
https://doi.org/10.1063/1.4940488
A preliminary study of multi-parameter POD curves for a guided waves based SHM approach to lightweight materials
AIP Conf. Proc. 1706, 030018 (2016)
https://doi.org/10.1063/1.4940490
Development of a low frequency shear horizontal piezoelectric transducer for the generation of plane SH waves
AIP Conf. Proc. 1706, 030019 (2016)
https://doi.org/10.1063/1.4940491
Locating damages in a complex structure using one or two fixed ultrasonic transducers
AIP Conf. Proc. 1706, 030020 (2016)
https://doi.org/10.1063/1.4940492
Effect of fill conditions on bulk wave scattering from a through-hole
AIP Conf. Proc. 1706, 030021 (2016)
https://doi.org/10.1063/1.4940493
CHAPTER 2 ULTRASONIC: ARRAYS
A novel serrated columnar phased array ultrasonic transducer
AIP Conf. Proc. 1706, 040002 (2016)
https://doi.org/10.1063/1.4940496
Investigation into angular and frequency dependence of scattering matrices of elastodynamic scatterers
AIP Conf. Proc. 1706, 040003 (2016)
https://doi.org/10.1063/1.4940497
Multiple scattering filter: Application to plane defect detection in a nickel alloy
AIP Conf. Proc. 1706, 040004 (2016)
https://doi.org/10.1063/1.4940498
CHAPTER 3 ULTRASONIC: FUNDAMENTALS AND COMPOSITES
Effect of irregularity in shape and boundary of a macro-texture region in titanium
AIP Conf. Proc. 1706, 050001 (2016)
https://doi.org/10.1063/1.4940500
High performance ultrasonic field simulation on complex geometries
AIP Conf. Proc. 1706, 050002 (2016)
https://doi.org/10.1063/1.4940501
Local defect resonance for sensitive non-destructive testing
AIP Conf. Proc. 1706, 050005 (2016)
https://doi.org/10.1063/1.4940504
Ultrasonic tracking of ply drops in composite laminates
AIP Conf. Proc. 1706, 050006 (2016)
https://doi.org/10.1063/1.4940505
CHAPTER 4 NONLINEAR ULTRASONIC
A micromechanics model for the acoustic nonlinearity parameter in solids with distributed microcracks
AIP Conf. Proc. 1706, 060001 (2016)
https://doi.org/10.1063/1.4940507
Analytical and numerical modeling of non-collinear shear wave mixing at an imperfect interface
AIP Conf. Proc. 1706, 060002 (2016)
https://doi.org/10.1063/1.4940508
Measurement of nonlinearity parameter (β) of water using commercial immersion transducers
AIP Conf. Proc. 1706, 060004 (2016)
https://doi.org/10.1063/1.4940510
A novel and practical approach for determination of the acoustic nonlinearity parameter using a pulse-echo method
AIP Conf. Proc. 1706, 060006 (2016)
https://doi.org/10.1063/1.4940512
Experimental comparison of nonlinear parameters obtained from absolute measurement and relative measurement
AIP Conf. Proc. 1706, 060007 (2016)
https://doi.org/10.1063/1.4940513
Comparison of ultrasonic nonlinear parameters measured by PZT and LiNbO3 transducers
AIP Conf. Proc. 1706, 060008 (2016)
https://doi.org/10.1063/1.4940514
Insights into alkali-silica reaction damage in mortar through acoustic nonlinearity
AIP Conf. Proc. 1706, 060009 (2016)
https://doi.org/10.1063/1.4940515
Nonlinear Rayleigh wave sound fields generated by a wedge transducer
AIP Conf. Proc. 1706, 060010 (2016)
https://doi.org/10.1063/1.4940516
Measurement of attenuation coefficients of the fundamental and second harmonic waves in water
AIP Conf. Proc. 1706, 060011 (2016)
https://doi.org/10.1063/1.4940517
Development of a 3D finite element model evaluating air-coupled ultrasonic measurements of nonlinear Rayleigh waves
AIP Conf. Proc. 1706, 060012 (2016)
https://doi.org/10.1063/1.4940518
CHAPTER 5 UT MICROSTRUCTURAL SCATTERING AND RESONANCE
Finite element modelling of wave propagation in highly scattering materials
AIP Conf. Proc. 1706, 070001 (2016)
https://doi.org/10.1063/1.4940519
Improved semi-analytical simulation of UT inspections using a ray-based decomposition of the incident fields
AIP Conf. Proc. 1706, 070002 (2016)
https://doi.org/10.1063/1.4940520
Development of flexible SAW sensors for non-destructive testing of structure
R. Takpara; M. Duquennoy; C. Courtois; M. Gonon; M. Ouaftouh; G. Martic; M. Rguiti; F. Jenot; L. Seronveaux; C. Pelegris
AIP Conf. Proc. 1706, 070003 (2016)
https://doi.org/10.1063/1.4940521
Ultrasonic imaging in coarse-grained stainless steels by total focusing method
AIP Conf. Proc. 1706, 070004 (2016)
https://doi.org/10.1063/1.4940522
Elastic constants of α Ti-7Al measured using resonant ultrasound spectroscopy
AIP Conf. Proc. 1706, 070005 (2016)
https://doi.org/10.1063/1.4940523
Effect of diffraction on evaluation of grain size in curved component using ultrasonic attenuation method
AIP Conf. Proc. 1706, 070006 (2016)
https://doi.org/10.1063/1.4940524
Root-cause estimation of ultrasonic scattering signatures within a complex textured titanium
AIP Conf. Proc. 1706, 070007 (2016)
https://doi.org/10.1063/1.4940525
Uncertainty quantification in modeling and measuring components with resonant ultrasound spectroscopy
AIP Conf. Proc. 1706, 070008 (2016)
https://doi.org/10.1063/1.4940526
The influence of ultrasonic frequency on shear stress measurement using acoustoelasticity
AIP Conf. Proc. 1706, 070010 (2016)
https://doi.org/10.1063/1.4940528
Techniques and software tools for estimating ultrasonic signal-to-noise ratios
AIP Conf. Proc. 1706, 070012 (2016)
https://doi.org/10.1063/1.4940530
Voronoi based microstructure modelling for elastic wave propagation
AIP Conf. Proc. 1706, 070013 (2016)
https://doi.org/10.1063/1.4940531
Ultrasound finite element simulation sensitivity to anisotropic titanium microstructures
AIP Conf. Proc. 1706, 070014 (2016)
https://doi.org/10.1063/1.4940532
CHAPTER 6 NON-CONTACT AND LASER ULTRASONICS
Focusing of ferroelectret air-coupled ultrasound transducers
AIP Conf. Proc. 1706, 080001 (2016)
https://doi.org/10.1063/1.4940533
Non-contact ultrasonic defect imaging in composites
AIP Conf. Proc. 1706, 080003 (2016)
https://doi.org/10.1063/1.4940535
Directivity patterns of ultrasonic waves generated by a laser pulse at the interface between two elastic media
AIP Conf. Proc. 1706, 080004 (2016)
https://doi.org/10.1063/1.4940536
Use of the Hugoniot elastic limit in laser shockwave experiments to relate velocity measurements
AIP Conf. Proc. 1706, 080005 (2016)
https://doi.org/10.1063/1.4940537
CHAPTER 7 EDDY CURRENT NDE
Model-based inverse methods for sizing surface-breaking discontinuities with eddy current probe variability
John C. Aldrin; Eric B. Shell; Erin K. Oneida; Harold A. Sabbagh; Elias Sabbagh; R. Kim Murphy; Siamack Mazdiyasni; Eric A. Lindgren
AIP Conf. Proc. 1706, 090002 (2016)
https://doi.org/10.1063/1.4940539
In-situ calibration of pulsed eddy current detection of cracks at fasteners in CP-140 aircraft
AIP Conf. Proc. 1706, 090004 (2016)
https://doi.org/10.1063/1.4940541
Analysis of pulsed eddy current data using regression models for steam generator tube support structure inspection
AIP Conf. Proc. 1706, 090005 (2016)
https://doi.org/10.1063/1.4940542
Nondestructive damage characterization of complex aircraft structures by inverse methods: Advances in multiscale models
R. Kim Murphy; Harold A. Sabbagh; Elias H. Sabbagh; Liming Zhou; William Bernacchi; John C. Aldrin; David Forsyth; Eric Lindgren
AIP Conf. Proc. 1706, 090007 (2016)
https://doi.org/10.1063/1.4940544
Identification of rebars in a reinforced mesh using eddy current method
AIP Conf. Proc. 1706, 090008 (2016)
https://doi.org/10.1063/1.4940545
Application of induced circumferential current for cracks inspection on pipe string
AIP Conf. Proc. 1706, 090010 (2016)
https://doi.org/10.1063/1.4940547
Optimal impedance on transmission of Lorentz force EMATs
AIP Conf. Proc. 1706, 090012 (2016)
https://doi.org/10.1063/1.4940549
Further capacitive imaging experiments using modified probes
AIP Conf. Proc. 1706, 090013 (2016)
https://doi.org/10.1063/1.4940550
Preliminary research on eddy current bobbin quantitative test for heat exchange tube in nuclear power plant
AIP Conf. Proc. 1706, 090014 (2016)
https://doi.org/10.1063/1.4940551
Eddy-current NDE inverse problem with sparse grid algorithm
Liming Zhou; Harold A. Sabbagh; Elias H. Sabbagh; R. Kim Murphy; William Bernacchi; John C. Aldrin; David Forsyth; Eric Lindgren
AIP Conf. Proc. 1706, 090016 (2016)
https://doi.org/10.1063/1.4940553
Enhancing pulsed eddy current for inspection of P-3 Orion lap-joint structures
AIP Conf. Proc. 1706, 090017 (2016)
https://doi.org/10.1063/1.4940554
Progress in model development for eddy current response in the presence of small conductivity changes
AIP Conf. Proc. 1706, 090019 (2016)
https://doi.org/10.1063/1.4940556
Model-based inverse methods for sizing cracks of varying shape and location in bolt-hole eddy current (BHEC) inspections
John C. Aldrin; Harold A. Sabbagh; Liming Zhao; Elias Sabbagh; R. Kim Murphy; Mark Keiser; Jennifer Flores-Lamb; David S. Forsyth; Doyle Motes; Eric A. Lindgren; Ryan Mooers
AIP Conf. Proc. 1706, 090020 (2016)
https://doi.org/10.1063/1.4940557
Flaw characterization using inversion of eddy current response and the effect of filters and scan resolution
Erin K. Oneida; Eric B. Shell; John C. Aldrin; Harold A. Sabbagh; Elias H. Sabbagh; R. Kim Murphy; Siamack Mazdiyasni; Eric A. Lindgren
AIP Conf. Proc. 1706, 090021 (2016)
https://doi.org/10.1063/1.4940558
Effects of angular variation on split D differential eddy current probe response
AIP Conf. Proc. 1706, 090022 (2016)
https://doi.org/10.1063/1.4940559
Stress dependence of the Hall coefficient of a nickel-base superalloy
AIP Conf. Proc. 1706, 090023 (2016)
https://doi.org/10.1063/1.4940560
CHAPTER 8 MICROWAVE, TERAHERTZ, OPTICAL INFRARED NDE, THERMOGRAPHY AND THERMOSONICS
NDE of composite structures using microwave time reversal imaging
AIP Conf. Proc. 1706, 100002 (2016)
https://doi.org/10.1063/1.4940562
Microwave sensor design for noncontact process monitoring at elevated temperature
AIP Conf. Proc. 1706, 100003 (2016)
https://doi.org/10.1063/1.4940563
Thermal property measurement for thermal barrier coatings using pulsed thermal imaging – multilayer analysis method
AIP Conf. Proc. 1706, 100004 (2016)
https://doi.org/10.1063/1.4940564
Multilayer material characterization using thermographic signal reconstruction
AIP Conf. Proc. 1706, 100005 (2016)
https://doi.org/10.1063/1.4940565
Evaluation of SonicIR handheld system on composite impact damage detection
AIP Conf. Proc. 1706, 100007 (2016)
https://doi.org/10.1063/1.4940567
Develop algorithms to improve detectability of defects in Sonic IR imaging NDE
AIP Conf. Proc. 1706, 100009 (2016)
https://doi.org/10.1063/1.4940569
Laser based spot weld characterization
AIP Conf. Proc. 1706, 100010 (2016)
https://doi.org/10.1063/1.4940570
Object motion tracking in the NDE laboratory by random sample iterative closest point
AIP Conf. Proc. 1706, 100011 (2016)
https://doi.org/10.1063/1.4940571
CHAPTER 9 X-RAY, CT, AND RADIOGRAPHIC METHODS
Implementation and evaluation of two helical CT reconstruction algorithms in CIVA
AIP Conf. Proc. 1706, 110001 (2016)
https://doi.org/10.1063/1.4940572
Application of offset-CT scanning to the inspection of high power feeder lines and connections
AIP Conf. Proc. 1706, 110002 (2016)
https://doi.org/10.1063/1.4940573
Modelling based radiography for NDE of subsea pipelines
Misty I. Haith; Uwe Ewert; Stefan Hohendorf; Carsten Bellon; Andreas Deresch; Peter Huthwaite; Michael J. S. Lowe; Uwe Zscherpel
AIP Conf. Proc. 1706, 110004 (2016)
https://doi.org/10.1063/1.4940575
Simulating radiographic inspections with imaging plates
AIP Conf. Proc. 1706, 110005 (2016)
https://doi.org/10.1063/1.4940576
NDE of spacecraft materials using 3D Compton backscatter x-ray imaging
AIP Conf. Proc. 1706, 110006 (2016)
https://doi.org/10.1063/1.4940577
Scintillating quantum dots for imaging x-rays (SQDIX) for aircraft inspection
AIP Conf. Proc. 1706, 110007 (2016)
https://doi.org/10.1063/1.4940578
Application of dual-energy x-ray techniques for automated food container inspection
AIP Conf. Proc. 1706, 110008 (2016)
https://doi.org/10.1063/1.4940579
Characterization of pores in high pressure die cast aluminum using active thermography and computed tomography
Christiane Maierhofer; Philipp Myrach; Mathias Röllig; Florian Jonietz; Bernhard Illerhaus; Dietmar Meinel; Uwe Richter; Ronald Miksche
AIP Conf. Proc. 1706, 110009 (2016)
https://doi.org/10.1063/1.4940580
X-ray simulation for structural integrity for aerospace components – A case study
AIP Conf. Proc. 1706, 110011 (2016)
https://doi.org/10.1063/1.4940582
Volumetric measurement of residual stress using high energy x-ray diffraction
AIP Conf. Proc. 1706, 110013 (2016)
https://doi.org/10.1063/1.4940584
Segmenting delaminations in carbon fiber reinforced polymer composite CT using convolutional neural networks
AIP Conf. Proc. 1706, 110014 (2016)
https://doi.org/10.1063/1.4940585
CHAPTER 10 APPLICATIONS: NDE OF COMPOSITES
Improved FE simulation of ultrasound in plastics
AIP Conf. Proc. 1706, 120001 (2016)
https://doi.org/10.1063/1.4940586
High contrast ultrasonic imaging of resin-rich regions in graphite/epoxy composites using entropy
AIP Conf. Proc. 1706, 120002 (2016)
https://doi.org/10.1063/1.4940587
Coda wave interferometry for the measurement of thermally induced ultrasonic velocity variations in CFRP laminates
AIP Conf. Proc. 1706, 120003 (2016)
https://doi.org/10.1063/1.4940588
Novel self-sensing carbon nanotube-based composites for rehabilitation of structural steel members
AIP Conf. Proc. 1706, 120004 (2016)
https://doi.org/10.1063/1.4940589
Monitoring of fatigue damage in composite lap-joints using guided waves and FBG sensors
AIP Conf. Proc. 1706, 120005 (2016)
https://doi.org/10.1063/1.4940590
Evaluation of fatigue damage accumulation in composites via linear and nonlinear guided wave methods
AIP Conf. Proc. 1706, 120007 (2016)
https://doi.org/10.1063/1.4940592
Acoustic characterization of void distributions across carbon-fiber composite layers
AIP Conf. Proc. 1706, 120008 (2016)
https://doi.org/10.1063/1.4940593
Advances in electromagnetic models for three-dimensional nondestructive evaluation of advanced composites
AIP Conf. Proc. 1706, 120009 (2016)
https://doi.org/10.1063/1.4940594
A model-based, Bayesian characterization of subsurface corrosion parameters in composite multi-layered structures
AIP Conf. Proc. 1706, 120010 (2016)
https://doi.org/10.1063/1.4940595
Challenges of NDE simulation tool validation, optimization, and utilization for composites
AIP Conf. Proc. 1706, 120011 (2016)
https://doi.org/10.1063/1.4940596
Numerical simulations of thermographic responses in composites
AIP Conf. Proc. 1706, 120012 (2016)
https://doi.org/10.1063/1.4940597
3D finite element modelling of guided wave scattering at delaminations in composites
AIP Conf. Proc. 1706, 120013 (2016)
https://doi.org/10.1063/1.4940598
Dispersion loci of guided waves in viscoelastic composites of general anisotropy
AIP Conf. Proc. 1706, 120014 (2016)
https://doi.org/10.1063/1.4940599
CHAPTER 11 ADDITIVE MANUFACTURING AND MATERIAL CHARACTERIZATION
Additive manufacturing metrology: State of the art and needs assessment
AIP Conf. Proc. 1706, 130001 (2016)
https://doi.org/10.1063/1.4940604
On- and offline ultrasonic characterization of components built by SLM additive manufacturing
AIP Conf. Proc. 1706, 130002 (2016)
https://doi.org/10.1063/1.4940605
Inspection of additive manufactured parts using laser ultrasonics
AIP Conf. Proc. 1706, 130003 (2016)
https://doi.org/10.1063/1.4940606
Relationship between near-surface ultrasonic shear-wave backscatter and grain size in metals
AIP Conf. Proc. 1706, 130004 (2016)
https://doi.org/10.1063/1.4940607
Statistical flaw characterization through Bayesian shape inversion from scattered wave observations
AIP Conf. Proc. 1706, 130005 (2016)
https://doi.org/10.1063/1.4940608
Change of nonlinear acoustics in ASME grade 122 steel welded joint during creep
AIP Conf. Proc. 1706, 130006 (2016)
https://doi.org/10.1063/1.4940609
CHAPTER 12 APPLICATIONS: NDE AND NDT SYSTEMS AND CIVIL ENGINEERING MATERIALS
Classification of alkali-silica reaction and corrosion distress using acoustic emission
AIP Conf. Proc. 1706, 140001 (2016)
https://doi.org/10.1063/1.4940610
Compton imaging tomography for one-sided access NDE of nuclear power plant structures, systems, and components
AIP Conf. Proc. 1706, 140003 (2016)
https://doi.org/10.1063/1.4940612
CHAPTER 13 APPLICATIONS: NDE IN THE RAILWAY BRANCH
NDT of railway components using induction thermography
AIP Conf. Proc. 1706, 150001 (2016)
https://doi.org/10.1063/1.4940613
Non-destructive testing and fracture mechanics: A short discussion
AIP Conf. Proc. 1706, 150002 (2016)
https://doi.org/10.1063/1.4940614
A machine vision assisted system for fluorescent magnetic particle inspection of railway wheelsets
AIP Conf. Proc. 1706, 150003 (2016)
https://doi.org/10.1063/1.4940615
Influence of resonant transducer variations on long range guided wave monitoring of rail track
AIP Conf. Proc. 1706, 150004 (2016)
https://doi.org/10.1063/1.4940616
CHAPTER 14 PIPELINES
Evaluating an SH wave EMAT system for pipeline screening and extending into quantitative defect measurements
AIP Conf. Proc. 1706, 160001 (2016)
https://doi.org/10.1063/1.4940618
Material property relationships for pipeline steels and the potential for application of NDE
AIP Conf. Proc. 1706, 160003 (2016)
https://doi.org/10.1063/1.4940620
Ultrasonic and magnetic Barkhausen emission measurements for characterization of pipeline steels
AIP Conf. Proc. 1706, 160004 (2016)
https://doi.org/10.1063/1.4940621
Non-destructive evaluation of spiral-welded pipes using flexural guided waves
AIP Conf. Proc. 1706, 160005 (2016)
https://doi.org/10.1063/1.4940622
Electromagnetic non-destructive technique for duplex stainless steel characterization
AIP Conf. Proc. 1706, 160006 (2016)
https://doi.org/10.1063/1.4940623
CHAPTER 15 APPLICATIONS: NUCLEAR
Mitigating the effects of surface morphology changes during ultrasonic wall thickness monitoring
AIP Conf. Proc. 1706, 170001 (2016)
https://doi.org/10.1063/1.4940624
Conformable eddy current array delivery
Rahul Summan; Gareth Pierce; Charles Macleod; Carmelo Mineo; Jonathan Riise; Maxim Morozov; Gordon Dobie; Gary Bolton; Angélique Raude; Colombe Dalpé; Johannes Braumann
AIP Conf. Proc. 1706, 170003 (2016)
https://doi.org/10.1063/1.4940626
Experimental validation of ultrasonic NDE simulation software
Gerges Dib; Michael Larche; Aaron A. Diaz; Susan L. Crawford; Matthew S. Prowant; Michael T. Anderson
AIP Conf. Proc. 1706, 170004 (2016)
https://doi.org/10.1063/1.4940627
Progress in the development and demonstration of a 2D-matrix phased array ultrasonic probe for under-sodium viewing
AIP Conf. Proc. 1706, 170005 (2016)
https://doi.org/10.1063/1.4940628
Assessment of NDE for key indicators of aging cables in nuclear power plants – Interim status
S. W. Glass; P. Ramuhalli; L. S. Fifield; M. S. Prowant; G. Dib; J. R. Tedeschi; J. D. Suter; A. M. Jones; M. S. Good; A. F. Pardini; T. S. Hartman
AIP Conf. Proc. 1706, 170006 (2016)
https://doi.org/10.1063/1.4940629
CHAPTER 16 SIGNAL PROCESSING
Ensemble of classifiers for confidence-rated classification of NDE signal
AIP Conf. Proc. 1706, 180001 (2016)
https://doi.org/10.1063/1.4940631
Database generation and exploitation for efficient and intensive simulation studies
AIP Conf. Proc. 1706, 180002 (2016)
https://doi.org/10.1063/1.4940632
Application of metal magnetic memory technology on defects detection of jack-up platform
AIP Conf. Proc. 1706, 180003 (2016)
https://doi.org/10.1063/1.4940633
Fusion of multi-sensory NDT data for reliable detection of surface cracks: Signal-level vs. decision-level
AIP Conf. Proc. 1706, 180004 (2016)
https://doi.org/10.1063/1.4940634
A robust multi-frequency mixing algorithm for suppression of rivet signal in GMR inspection of riveted structures
AIP Conf. Proc. 1706, 180005 (2016)
https://doi.org/10.1063/1.4940635
Flaw sizing method based on ultrasonic dynamic thresholds and neural network
AIP Conf. Proc. 1706, 180007 (2016)
https://doi.org/10.1063/1.4940637
Atomic library optimization for pulse ultrasonic sparse signal decomposition and reconstruction
AIP Conf. Proc. 1706, 180008 (2016)
https://doi.org/10.1063/1.4940638
Neuro fuzzy force control for soft dry contact Hertzian ultrasonic probe
AIP Conf. Proc. 1706, 180010 (2016)
https://doi.org/10.1063/1.4940640
Full-matrix capture and USB3.0 for open platform phased array instruments
AIP Conf. Proc. 1706, 180011 (2016)
https://doi.org/10.1063/1.4940641
CHAPTER 17 BENCHMARKS
Solution of the WFNDEC 2015 eddy current benchmark with surface integral equation method
AIP Conf. Proc. 1706, 190002 (2016)
https://doi.org/10.1063/1.4940643
2015 WFNDEC eddy current benchmark modeling of impedance variation in coil due to a crack located at the plate edge
AIP Conf. Proc. 1706, 190003 (2016)
https://doi.org/10.1063/1.4940644
CHAPTER 18 6TH EAW RELIABILITY OF NDE
PAUT inspection of copper canister: Structural attenuation and POD formulation
AIP Conf. Proc. 1706, 200005 (2016)
https://doi.org/10.1063/1.4940649
Model-based POD study of manual ultrasound inspection and sensitivity analysis using metamodel
AIP Conf. Proc. 1706, 200006 (2016)
https://doi.org/10.1063/1.4940650
How much information do we need? A reflection of the correct use of real defects in POD-evaluations
AIP Conf. Proc. 1706, 200008 (2016)
https://doi.org/10.1063/1.4940652
Overview of the program to assess the reliability of emerging nondestructive techniques open testing and study of flaw type effect on NDE response
Ryan M. Meyer; Ichiro Komura; Kyung-cho Kim; Tommy Zetterwall; Stephen E. Cumblidge; Iouri Prokofiev
AIP Conf. Proc. 1706, 200010 (2016)
https://doi.org/10.1063/1.4940654
POD curves for non-maximizable ultrasonic responses: Statistical derivation and application to solid freight axles
AIP Conf. Proc. 1706, 200011 (2016)
https://doi.org/10.1063/1.4940655
Partial coverage inspection of corroded engineering components using extreme value analysis
AIP Conf. Proc. 1706, 200012 (2016)
https://doi.org/10.1063/1.4940656
Calculating inspector probability of detection using performance demonstration program pass rates
AIP Conf. Proc. 1706, 200013 (2016)
https://doi.org/10.1063/1.4940657
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.