Skip Nav Destination
Issues
22 May 2015
In this Issue
PRELIMINARY
Sponsors and Exhibitors: 30th International Conference of the Polymer Processing Society
AIP Conf. Proc. 1664, 010002 (2015)
https://doi.org/10.1063/1.4918380
MIXING AND COMPOUNDING
Thermal properties of poly(3-hydroxybutyrate)/vegetable fiber composites
AIP Conf. Proc. 1664, 020004 (2015)
https://doi.org/10.1063/1.4918384
The optimization of Blister Disk geometry for mixing performance in co-rotating twin-screw extruder
AIP Conf. Proc. 1664, 020006 (2015)
https://doi.org/10.1063/1.4918386
Fundamentals of twin-screw extrusion polymer melting: Common pitfalls and how to avoid them
AIP Conf. Proc. 1664, 020007 (2015)
https://doi.org/10.1063/1.4918387
POLYMER BLENDS AND ALLOYS
Improvement of PET surface hydrophilicity and roughness through blending
AIP Conf. Proc. 1664, 030001 (2015)
https://doi.org/10.1063/1.4918391
Shape-memory actuators on the basis of binary and ternary blends of polyethylenes
AIP Conf. Proc. 1664, 030002 (2015)
https://doi.org/10.1063/1.4918392
Orientation birefringence of cross-linked rubber containing low-mass compound
AIP Conf. Proc. 1664, 030004 (2015)
https://doi.org/10.1063/1.4918394
Biobased poly(lactides)/poly(methyl methacrylate) blends: A perfect association for durable and smart applications?
AIP Conf. Proc. 1664, 030005 (2015)
https://doi.org/10.1063/1.4918395
Fabrication of chitosan/polyacrylonitrile blend and semi-IPN hydrogel with epichlorohydrin
AIP Conf. Proc. 1664, 030006 (2015)
https://doi.org/10.1063/1.4918396
FOAMS
Effect of crystals and fibrous network polymer additives on cellular morphology of microcellular foams
AIP Conf. Proc. 1664, 040001 (2015)
https://doi.org/10.1063/1.4918399
Evaluation of foaming polypropylene modified with ramified polymer
AIP Conf. Proc. 1664, 040004 (2015)
https://doi.org/10.1063/1.4918402
An accurate higher order plate theory for tailoring the properties of functionally graded porous media
AIP Conf. Proc. 1664, 040006 (2015)
https://doi.org/10.1063/1.4918404
MODELING AND SIMULATION
Validation of discrete element simulations in the field of solids conveying in single-screw extruders
AIP Conf. Proc. 1664, 050001 (2015)
https://doi.org/10.1063/1.4918405
Numerical simulation of viscoelastic layer rearrangement in polymer melts using OpenFOAM®
AIP Conf. Proc. 1664, 050003 (2015)
https://doi.org/10.1063/1.4918407
Numerical optimization of a multi-jet cooling system for the blown film extrusion
AIP Conf. Proc. 1664, 050005 (2015)
https://doi.org/10.1063/1.4918409
Modeling morphology evolution during injection molding of thermoplastic polymers
AIP Conf. Proc. 1664, 050006 (2015)
https://doi.org/10.1063/1.4918410
Simulation of shrinkage and warpage of semi-crystalline thermoplastics
AIP Conf. Proc. 1664, 050009 (2015)
https://doi.org/10.1063/1.4918413
Moffatt eddies in the single screw extruder: Numerical and analytical study
AIP Conf. Proc. 1664, 050010 (2015)
https://doi.org/10.1063/1.4918414
Simulative design and process optimization of the two-stage stretch-blow molding process
AIP Conf. Proc. 1664, 050011 (2015)
https://doi.org/10.1063/1.4918415
Mold deflection effects on the prediction of packing pressure decay and shrinkage of semi-crystalline polymers
AIP Conf. Proc. 1664, 050012 (2015)
https://doi.org/10.1063/1.4918416
Injection molding simulation with variothermal mold temperature control of highly filled polyphenylene sulfide
AIP Conf. Proc. 1664, 050013 (2015)
https://doi.org/10.1063/1.4918417
COMPOSITES
The mechanical properties of density graded hemp/polyethylene composites
AIP Conf. Proc. 1664, 060001 (2015)
https://doi.org/10.1063/1.4918419
Effect of water absorption on the mechanical properties of poly(3-hydroxybutyrate)/vegetable fiber composites
AIP Conf. Proc. 1664, 060003 (2015)
https://doi.org/10.1063/1.4918421
Progress in modeling long glass and carbon fiber breakage during injection molding
AIP Conf. Proc. 1664, 060004 (2015)
https://doi.org/10.1063/1.4918422
The effect of in-service aerospace contaminants on X-band dielectric properties of a bismaleimide/quartz composite
AIP Conf. Proc. 1664, 060005 (2015)
https://doi.org/10.1063/1.4918423
Analysis of the resin transfer molding (RTM) process for FRP and its process simulation fundamentals
AIP Conf. Proc. 1664, 060010 (2015)
https://doi.org/10.1063/1.4918428
Study of mechanical and morphological properties of bio-based polyethylene (HDPE) and sponge-gourds (Luffa-cylindrica) agroresidue composites
Viviane A. Escocio; Leila L. Y. Visconte; Andre de P. Cavalcante; Ana Maria S. Furtado; Elen B. A. V. Pacheco
AIP Conf. Proc. 1664, 060012 (2015)
https://doi.org/10.1063/1.4918430
Effect of laminate edge conditions on the formation of microvoids in composite laminates
AIP Conf. Proc. 1664, 060013 (2015)
https://doi.org/10.1063/1.4918431
Reactive processing of textile-natural fiber reinforced anionic polyamide-6 composites
AIP Conf. Proc. 1664, 060014 (2015)
https://doi.org/10.1063/1.4918432
Thermal properties of polyolefin composites with copper silicate
AIP Conf. Proc. 1664, 060016 (2015)
https://doi.org/10.1063/1.4918434
Characterization of non-Fickian moisture absorption in thermosetting polymers
AIP Conf. Proc. 1664, 060017 (2015)
https://doi.org/10.1063/1.4918435
NANOCOMPOSITES
Superhydrophobic durable coating based on UV-photoreactive silica nanoparticles
AIP Conf. Proc. 1664, 070001 (2015)
https://doi.org/10.1063/1.4918436
Fabrication of DNA/Hydroxyapatite nanocomposites by simulated body fluid for gene delivery
AIP Conf. Proc. 1664, 070003 (2015)
https://doi.org/10.1063/1.4918438
Short-term and long-term behavior of PP-polymer nanocomposites produced by injection molding compounding
AIP Conf. Proc. 1664, 070004 (2015)
https://doi.org/10.1063/1.4918439
Effect of cooling rate on the properties of high density polyethylene/multi-walled carbon nanotube composites
AIP Conf. Proc. 1664, 070005 (2015)
https://doi.org/10.1063/1.4918440
Effect of high temperature, biaxial stretching on the thermal and mechanical properties of HDPE/MWCNT sheet
AIP Conf. Proc. 1664, 070007 (2015)
https://doi.org/10.1063/1.4918442
Synthesis and characterization of polylactide/doxorubicin/magnetic nanoparticles composites for drug delivery
AIP Conf. Proc. 1664, 070008 (2015)
https://doi.org/10.1063/1.4918443
Fabrication of polylactide nanocomposite scaffolds for bone tissue engineering applications
AIP Conf. Proc. 1664, 070009 (2015)
https://doi.org/10.1063/1.4918444
Mineralized polymer composites as biogenic bone substitute material
AIP Conf. Proc. 1664, 070012 (2015)
https://doi.org/10.1063/1.4918447
Composites structures for bone tissue reconstruction
AIP Conf. Proc. 1664, 070013 (2015)
https://doi.org/10.1063/1.4918448
Improvement of barrier properties of rotomolded PE containers with nanoclay
AIP Conf. Proc. 1664, 070014 (2015)
https://doi.org/10.1063/1.4918449
Effect of nanoclay reinforcement on the X-band dielectric properties of epoxy resins for use in radome applications
AIP Conf. Proc. 1664, 070015 (2015)
https://doi.org/10.1063/1.4918450
A comparison of LLDPE-based nanocomposites containing multi-walled carbon nanotubes and graphene
AIP Conf. Proc. 1664, 070017 (2015)
https://doi.org/10.1063/1.4918452
The study of poly(L-lactide) grafted silica nanoparticles on the film blowing of poly(L-lactide)
AIP Conf. Proc. 1664, 070020 (2015)
https://doi.org/10.1063/1.4918455
Using the carbon nanotube (CNT)/CNT interaction to obtain hybrid conductive nanostructures
AIP Conf. Proc. 1664, 070021 (2015)
https://doi.org/10.1063/1.4918456
FIBERS AND FILMS
Heat seal processing by using various seal bar shape
AIP Conf. Proc. 1664, 080002 (2015)
https://doi.org/10.1063/1.4918458
Fiber structure formation in melt spinning of bio-based aliphatic co-polyesters
AIP Conf. Proc. 1664, 080004 (2015)
https://doi.org/10.1063/1.4918460
Peel/seal properties of poly(ethylene methyl acrylate)/polybutene-1 blend films
AIP Conf. Proc. 1664, 080005 (2015)
https://doi.org/10.1063/1.4918461
Influence of macromolecular architecture on necking in polymer extrusion film casting process
AIP Conf. Proc. 1664, 080006 (2015)
https://doi.org/10.1063/1.4918462
Mechanical behavior and essential work of fracture of starch-based blown films
AIP Conf. Proc. 1664, 080007 (2015)
https://doi.org/10.1063/1.4918463
REACTIVE PROCESSING
Chemorheology of in-mold coating for compression molded SMC applications
AIP Conf. Proc. 1664, 090001 (2015)
https://doi.org/10.1063/1.4918464
High melt strength, tear resistant blown film based on poly(lactic acid)
AIP Conf. Proc. 1664, 090002 (2015)
https://doi.org/10.1063/1.4918465
Silane cross-linkable ethylene-propylene elastomer compositions prepared by reactive processing
AIP Conf. Proc. 1664, 090003 (2015)
https://doi.org/10.1063/1.4918466
EXTRUSION AND EXTRUSION PROCESSES
Effects of layer-multiplying and interface on the content of β-transcrystallization in PP
AIP Conf. Proc. 1664, 100002 (2015)
https://doi.org/10.1063/1.4918469
Immiscible blend morphology after shear and elongation
AIP Conf. Proc. 1664, 100003 (2015)
https://doi.org/10.1063/1.4918470
Illustration of cross flow of polystyrene melts through a coathanger die
AIP Conf. Proc. 1664, 100004 (2015)
https://doi.org/10.1063/1.4918471
Development of a high speed extrusion concept using a floating screw sleeve for solid-melt-separation
AIP Conf. Proc. 1664, 100006 (2015)
https://doi.org/10.1063/1.4918473
A new scale-up approach for dispersive mixing in twin-screw compounding
AIP Conf. Proc. 1664, 100007 (2015)
https://doi.org/10.1063/1.4918474
Fundamental studies of interfacial rheology at multilayered model polymers for coextrusion process
AIP Conf. Proc. 1664, 100008 (2015)
https://doi.org/10.1063/1.4918475
INJECTION MOLDING
Electrical and dielectric properties of foam injection-molded polypropylene/multiwalled carbon nanotube composites
AIP Conf. Proc. 1664, 110002 (2015)
https://doi.org/10.1063/1.4918477
Injection moulding of optical functional micro structures using laser structured, PVD-coated mould inserts
Ch. Hopmann; M. Weber; M. Schöngart; C. Schäfer; K. Bobzin; N. Bagcivan; T. Brögelmann; S. Theiß; T. Münstermann; M. Steger
AIP Conf. Proc. 1664, 110003 (2015)
https://doi.org/10.1063/1.4918478
Effect analysis for compensating viscosity fluctuations by means of a self-optimising injection moulding process
AIP Conf. Proc. 1664, 110004 (2015)
https://doi.org/10.1063/1.4918479
The shrinkage behavior and surface topographical investigation for micro metal injection molding
AIP Conf. Proc. 1664, 110007 (2015)
https://doi.org/10.1063/1.4918482
Clamping characteristics study on different types of clamping unit
AIP Conf. Proc. 1664, 110009 (2015)
https://doi.org/10.1063/1.4918484
Numerical prediction of fiber orientation in injection-molded short-fiber/thermoplastic composite parts with experimental validation
Thanh Binh Nguyen Thi; Mizuki Morioka; Atsushi Yokoyama; Senji Hamanaka; Katsuhisa Yamashita; Chisato Nonomura
AIP Conf. Proc. 1664, 110011 (2015)
https://doi.org/10.1063/1.4918486
Rapid control of mold temperature during injection molding process
AIP Conf. Proc. 1664, 110015 (2015)
https://doi.org/10.1063/1.4918490
ELASTOMER MATERIALS AND PROCESSING
Investigations on the processing of solid silicon rubber in blow moulding
AIP Conf. Proc. 1664, 120001 (2015)
https://doi.org/10.1063/1.4918491
Effect of carbon black and/or elastomer on thermoplastic elastomer-based blends and composites
AIP Conf. Proc. 1664, 120003 (2015)
https://doi.org/10.1063/1.4918493
AEROGELS
Fabrication and characterization of silica aerogel as synthetic tissues for medical imaging phantoms
AIP Conf. Proc. 1664, 130002 (2015)
https://doi.org/10.1063/1.4918495
MATERIAL TECHNOLOGIES FOR ENERGY
MATERIAL TECHNOLOGIES FOR SUSTAINABILITY
Evaluation of mechanical properties and durability performance of HDPE-wood composites
AIP Conf. Proc. 1664, 150001 (2015)
https://doi.org/10.1063/1.4918497
The effect of particle size on the rheological properties of polyamide 6/biochar composites
AIP Conf. Proc. 1664, 150004 (2015)
https://doi.org/10.1063/1.4918500
Biocomposites from co-polypropylene and distillers’ grains
AIP Conf. Proc. 1664, 150005 (2015)
https://doi.org/10.1063/1.4918501
Effect of maleated polypropylene emulsion on the mechanical and thermal properties of lignin-polypropylene blends
AIP Conf. Proc. 1664, 150006 (2015)
https://doi.org/10.1063/1.4918502
The improvement in functional characteristics of eco-friendly composites made of natural rubber and cellulose
AIP Conf. Proc. 1664, 150010 (2015)
https://doi.org/10.1063/1.4918506
Thermal process-dependence of the mechanical properties and inner structures of pre-consumer recycled polypropylene
AIP Conf. Proc. 1664, 150011 (2015)
https://doi.org/10.1063/1.4918507
ADDITIVE MANUFACTURING
Characterization of temperature-dependent optical material properties of polymer powders
AIP Conf. Proc. 1664, 160001 (2015)
https://doi.org/10.1063/1.4918508
Simulation of warpage induced by non-isothermal crystallization of co-polypropylene during the SLS process
AIP Conf. Proc. 1664, 160002 (2015)
https://doi.org/10.1063/1.4918509
Understanding the decisive thermal processes in laser sintering of polyamide 12
AIP Conf. Proc. 1664, 160004 (2015)
https://doi.org/10.1063/1.4918511
Thermomechanical simulation of the selective laser melting process for PA12 including volumetric shrinkage
AIP Conf. Proc. 1664, 160005 (2015)
https://doi.org/10.1063/1.4918512
Derivation of heating rate dependent exposure strategies for the selective laser melting of thermoplastic polymers
AIP Conf. Proc. 1664, 160006 (2015)
https://doi.org/10.1063/1.4918513
Modelling of the aging behavior of polyamide 12 powder during laser melting process
AIP Conf. Proc. 1664, 160007 (2015)
https://doi.org/10.1063/1.4918514
Functionalization of polymer powders for SLS-processes using an atmospheric plasma jet in a fluidized bed reactor
AIP Conf. Proc. 1664, 160010 (2015)
https://doi.org/10.1063/1.4918517
RHEOLOGY AND RHEOMETRY
Analysis of stability and viscoelastic properties of melts of polystyrene-block-polyisoprene diblock copolymers in oscillatory shear and creep-recovery experiments
Ulrich A. Handge; Taida Gil Haenelt; Prokopios Georgopanos; Clarissa Abetz; Sofia Rangou; Doreen Alisch; Ulla Vainio; Andreas Meyer; Volker Abetz
AIP Conf. Proc. 1664, 170001 (2015)
https://doi.org/10.1063/1.4918519
Modification of rheological properties of branched polyethylenes by a thermomechanical treatment
AIP Conf. Proc. 1664, 170002 (2015)
https://doi.org/10.1063/1.4918520
Modeling and analysis of electrorheological suspensions in shear flow
AIP Conf. Proc. 1664, 170003 (2015)
https://doi.org/10.1063/1.4918521
Rheological techniques for determining degradation of polylactic acid in bioresorbable medical polymer systems
AIP Conf. Proc. 1664, 170005 (2015)
https://doi.org/10.1063/1.4918523
FIRE SCIENCE AND ENGINEERING
Influence of structure of the metal salts of phosphinates on the performance of the fire-retardant polymers
AIP Conf. Proc. 1664, 180001 (2015)
https://doi.org/10.1063/1.4918525
Assessment and mitigation of combustible dust hazards in the plastics industry
AIP Conf. Proc. 1664, 180003 (2015)
https://doi.org/10.1063/1.4918527
MEMORIAL SESSION: LATE PROFESSOR MARINO XANTHOS (BY INVITATION ONLY)
Engineering analysis of tandem extruder system for foam manufacturing
AIP Conf. Proc. 1664, 190001 (2015)
https://doi.org/10.1063/1.4918528
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.