Skip Nav Destination
Issues
Front Matter for Volume 1593
AIP Conf. Proc. 1593, frontmatter (2014)
https://doi.org/10.1063/v1593.frontmatter
Back Matter for Volume 1593
AIP Conf. Proc. 1593, backmatter (2014)
https://doi.org/10.1063/v1593.backmatter
SESSION 06: POLYMER NANOSTRUCTURES AND NANOCOMPOSITES
Development of novel graphene and carbon nanotubes based multifunctional polymer matrix composites
AIP Conf. Proc. 1593, 240–243 (2014)
https://doi.org/10.1063/1.4873772
The effect of dispersion technique of montmorillonite on polyisocyanurate nanocomposites
AIP Conf. Proc. 1593, 286–289 (2014)
https://doi.org/10.1063/1.4873783
Effect of diameter of cellulosic nano-fiber on conductivity of poly(aniline sulfonic acid) composites
AIP Conf. Proc. 1593, 270–273 (2014)
https://doi.org/10.1063/1.4873779
Influence of blending protocol on the thermal and mechanical properties of HDPE/LLDPE blend-based nanocomposites
AIP Conf. Proc. 1593, 278–281 (2014)
https://doi.org/10.1063/1.4873781
Effects of environmental ageing on HMS-polypropylene/Cloisite nanocomposites
AIP Conf. Proc. 1593, 257–260 (2014)
https://doi.org/10.1063/1.4873776
Processing-structure-properties relationships in PLA nanocomposite films
AIP Conf. Proc. 1593, 308–311 (2014)
https://doi.org/10.1063/1.4873788
Dry particle coating of polymer particles for tailor-made product properties
AIP Conf. Proc. 1593, 248–252 (2014)
https://doi.org/10.1063/1.4873774
Influence of mixing in mechanical properties of clay and carbon nanotube and high density polyethylene
AIP Conf. Proc. 1593, 261–264 (2014)
https://doi.org/10.1063/1.4873777
Thermal fractionation (SSA) of the HDPE/grapheme nanocomposite and their relationship with crystalline domains
AIP Conf. Proc. 1593, 253–256 (2014)
https://doi.org/10.1063/1.4873775
Spherulitic nucleation and growth rates in a sheared polypropylene melt
AIP Conf. Proc. 1593, 294–297 (2014)
https://doi.org/10.1063/1.4873785
DNA adsorption characteristics of hollow spherical allophane nano-particles
AIP Conf. Proc. 1593, 244–247 (2014)
https://doi.org/10.1063/1.4873773
Evaluation of surfactants addition as compatibilizers for halloysite nanotubes filled polypropylene nanocomposites
AIP Conf. Proc. 1593, 274–277 (2014)
https://doi.org/10.1063/1.4873780
Mechanical properties improvement of silica aerogel through aging: Role of solvent type, time and temperature
AIP Conf. Proc. 1593, 298–302 (2014)
https://doi.org/10.1063/1.4873786
Fabrication of fluorescent composite with ultrafast aqueous synthesized high luminescent CdTe quantum dots
AIP Conf. Proc. 1593, 303–307 (2014)
https://doi.org/10.1063/1.4873787
SESSION 04: INJECTION MOLDING AND MOLDS
Ultrasound based monitoring of the injection moulding process - Methods, applications and limitations
AIP Conf. Proc. 1593, 159–162 (2014)
https://doi.org/10.1063/1.4873755
Influence of mold surface temperature on polymer part warpage in rapid heat cycle molding
AIP Conf. Proc. 1593, 189–194 (2014)
https://doi.org/10.1063/1.4873761
Inline quality prognosis of material condition induced process variations
AIP Conf. Proc. 1593, 163–169 (2014)
https://doi.org/10.1063/1.4873756
In mold laser welding for high precision polymer based optical components
AIP Conf. Proc. 1593, 204–208 (2014)
https://doi.org/10.1063/1.4873764
In-mold sensor concept to calculate process-specific rheological properties
AIP Conf. Proc. 1593, 179–182 (2014)
https://doi.org/10.1063/1.4873759
Influence of the local morphology on the surface tension of injection molded polypropylene
AIP Conf. Proc. 1593, 199–203 (2014)
https://doi.org/10.1063/1.4873763
Influence of the process parameters on the replication of microstructured freeform surfaces
AIP Conf. Proc. 1593, 183–188 (2014)
https://doi.org/10.1063/1.4873760
A wide variety of injection molding technologies is now applicable to small series and mass production
AIP Conf. Proc. 1593, 155–158 (2014)
https://doi.org/10.1063/1.4873754
Multilayer injection moulding of thick-walled optical plastics parts
AIP Conf. Proc. 1593, 146–149 (2014)
https://doi.org/10.1063/1.4873752
Interface conditions of two-shot molded parts
Thomas Kisslinger; Katharina Bruckmoser; Thomas Lucyshyn; Guenter Ruediger Langecker; Katharina Resch; Clemens Holzer
AIP Conf. Proc. 1593, 170–174 (2014)
https://doi.org/10.1063/1.4873757
SESSION 01: MIXING AND COMPOUNDING
Study on the recycling of waste PVC compounds from electrical wires
AIP Conf. Proc. 1593, 52–55 (2014)
https://doi.org/10.1063/1.4873732
Implementation of neural network for color properties of polycarbonates
AIP Conf. Proc. 1593, 56–59 (2014)
https://doi.org/10.1063/1.4873733
Color measurement of plastics - From compounding via pelletizing, up to injection molding and extrusion
AIP Conf. Proc. 1593, 16–19 (2014)
https://doi.org/10.1063/1.4873725
Influences on particle shape in underwater pelletizing processes
AIP Conf. Proc. 1593, 20–23 (2014)
https://doi.org/10.1063/1.4873726
A novel modeling approach to the mixing process in twin-screw extruders
AIP Conf. Proc. 1593, 29–38 (2014)
https://doi.org/10.1063/1.4873728
Plastification of polymers in twin-screw-extruders: New visualization technic using high-speed imaging
AIP Conf. Proc. 1593, 48–51 (2014)
https://doi.org/10.1063/1.4873731
Modelling of the glass fiber length and the glass fiber length distribution in the compounding of short glass fiber-reinforced thermoplastics
P. Kloke; T. Herken; V. Schöppner; J. Rudloff; K. Kretschmer; P. Heidemeyer; M. Bastian; Walther; A. Dridger
AIP Conf. Proc. 1593, 39–44 (2014)
https://doi.org/10.1063/1.4873729
SESSION 09: POLYMER COMPOSITES
Processing of microencapsulated dyes for the visual inspection of fibre reinforced plastics
AIP Conf. Proc. 1593, 449–453 (2014)
https://doi.org/10.1063/1.4873819
Influence of processing conditions on the morphology of expanded perlite/polypropylene composites
AIP Conf. Proc. 1593, 482–486 (2014)
https://doi.org/10.1063/1.4873826
Influence of part geometry and sample preparation on the thermal conductivity of composites
AIP Conf. Proc. 1593, 436–439 (2014)
https://doi.org/10.1063/1.4873816
High renewable content sandwich structures based on flax-basalt hybrids and biobased epoxy polymers
AIP Conf. Proc. 1593, 467–470 (2014)
https://doi.org/10.1063/1.4873823
Development and mechanical characterization of a polypropylene (pp) composite with grinding sludge as fiber
AIP Conf. Proc. 1593, 495–498 (2014)
https://doi.org/10.1063/1.4873829
Investigating cavity pressure behavior in high-pressure RTM process variants
AIP Conf. Proc. 1593, 463–466 (2014)
https://doi.org/10.1063/1.4873822
Processing of post-consumer HDPE reinforced with wood flour: Effect of functionaliation methodology
AIP Conf. Proc. 1593, 487–490 (2014)
https://doi.org/10.1063/1.4873827
Effect of cyclical loading on the macroscopic failure behaviour of fibre reinforced plastics
AIP Conf. Proc. 1593, 444–448 (2014)
https://doi.org/10.1063/1.4873818
Effects of screw speed on the properties of plasticized PLA/POSS composites
AIP Conf. Proc. 1593, 420–423 (2014)
https://doi.org/10.1063/1.4873812
Preparation of polyaniline/sodium alanate hybrid using a spray-drying process
AIP Conf. Proc. 1593, 491–494 (2014)
https://doi.org/10.1063/1.4873828
Lenses for terahertz applications: Development of new materials and production processes
N. Kocic; M. Wichmann; T. Hochrein; P. Heidemeyer; K. Kretschmer; I. Radovanovic; A. S. Mondol; M. Koch; M. Bastian
AIP Conf. Proc. 1593, 416–419 (2014)
https://doi.org/10.1063/1.4873811
Antimicrobial polymers - The antibacterial effect of photoactivated nano titanium dioxide polymer composites
AIP Conf. Proc. 1593, 440–443 (2014)
https://doi.org/10.1063/1.4873817
Further weight reduction of applications in long glass reinforced polymers
AIP Conf. Proc. 1593, 499–502 (2014)
https://doi.org/10.1063/1.4873830
Foam-injected sandwich panels with continuous-reinforced facings
AIP Conf. Proc. 1593, 477–481 (2014)
https://doi.org/10.1063/1.4873825
Liquid composite molding-processing and characterization of fiber-reinforced composites modified with carbon nanotubes
AIP Conf. Proc. 1593, 503–507 (2014)
https://doi.org/10.1063/1.4873831
Production of continuous fiber thermoplastic composites by in-situ pultrusion
AIP Conf. Proc. 1593, 454–457 (2014)
https://doi.org/10.1063/1.4873820
SESSION 12: MODELING AND SIMULATION
Numerical and experimental investigation of a counter flow cooling system for the blown film extrusion
AIP Conf. Proc. 1593, 534–538 (2014)
https://doi.org/10.1063/1.4873838
Through fiber orientation investigation to visualize compression molding
AIP Conf. Proc. 1593, 619–622 (2014)
https://doi.org/10.1063/1.4873856
The influence of mold deflection on the prediction of packing pressure decay and part shrinkage
AIP Conf. Proc. 1593, 565–570 (2014)
https://doi.org/10.1063/1.4873845
Ceramic injection molding material analysis, modeling and injection molding simulation
AIP Conf. Proc. 1593, 582–586 (2014)
https://doi.org/10.1063/1.4873848
Modelling morphology evolution during solidification of IPP in processing conditions
AIP Conf. Proc. 1593, 636–640 (2014)
https://doi.org/10.1063/1.4873860
The calibration of numerically simulated color and material change processes
AIP Conf. Proc. 1593, 628–631 (2014)
https://doi.org/10.1063/1.4873858
Scale up tools in reactive extrusion and compounding processes. Could 1D-computer modeling be helpful?
AIP Conf. Proc. 1593, 530–533 (2014)
https://doi.org/10.1063/1.4873837
Tanner's simple model of crystallization for power-law fluids extended
AIP Conf. Proc. 1593, 596–599 (2014)
https://doi.org/10.1063/1.4873851
Damage mechanisms in PBT-GF30 under thermo-mechanical cyclic loading
AIP Conf. Proc. 1593, 600–605 (2014)
https://doi.org/10.1063/1.4873852
Simulation of dilute polymeric fluids in a three-dimensional contraction using a multiscale FENE model
AIP Conf. Proc. 1593, 539–543 (2014)
https://doi.org/10.1063/1.4873839
CFD-based simulation of operational point influences on product changing processes
AIP Conf. Proc. 1593, 632–635 (2014)
https://doi.org/10.1063/1.4873859
A network-analysis-based comparative study of the throughput behavior of polymer melts in barrier screw geometries
AIP Conf. Proc. 1593, 606–610 (2014)
https://doi.org/10.1063/1.4873853
Mixing processes - Influence of the viscosity model on flow calculations
AIP Conf. Proc. 1593, 549–555 (2014)
https://doi.org/10.1063/1.4873841
Local mechanical properties of LFT injection molded parts: Numerical simulations versus experiments
AIP Conf. Proc. 1593, 641–645 (2014)
https://doi.org/10.1063/1.4873861
Cooling effects study by considering a turbulence model in injection molding
AIP Conf. Proc. 1593, 615–618 (2014)
https://doi.org/10.1063/1.4873855
Numerical approach of the injection molding process of fiber-reinforced composite with considering fiber orientation
AIP Conf. Proc. 1593, 571–577 (2014)
https://doi.org/10.1063/1.4873846
A mathematical model describing the solid conveying and melting behavior of planetary roller extruders
AIP Conf. Proc. 1593, 592–595 (2014)
https://doi.org/10.1063/1.4873850
3D-CFD-simulation of melting processes in a high-speed-extruder with solid-melt-separation
AIP Conf. Proc. 1593, 623–627 (2014)
https://doi.org/10.1063/1.4873857
SESSION 02: FILMS AND FIBERS
Design, build-up and optimization of a fast quenching device for polymeric thin film
AIP Conf. Proc. 1593, 72–75 (2014)
https://doi.org/10.1063/1.4873737
Effects of pre-annealing on the uni- and bi-axial stretching behavior of poly(ethylene naphthalate) films
AIP Conf. Proc. 1593, 68–71 (2014)
https://doi.org/10.1063/1.4873736
Fibrillar morphology formation in a sheared polypropylene melt
AIP Conf. Proc. 1593, 76–79 (2014)
https://doi.org/10.1063/1.4873738
Rapid permeation measurement system for the production control of monolayer and multilayer films
AIP Conf. Proc. 1593, 64–67 (2014)
https://doi.org/10.1063/1.4873735
Design and development of liquid filled polymeric fibers with flexure rate viscoelastic properties
AIP Conf. Proc. 1593, 60–63 (2014)
https://doi.org/10.1063/1.4873734
The effect of temperature and drawing ratio on the mechanical properties of polypropylene monofilaments
AIP Conf. Proc. 1593, 80–85 (2014)
https://doi.org/10.1063/1.4873739
SESSION 18: ADDITIVE MANUFACTURING FOR PLASTIC COMPONENTS
Simulation of the temperature distribution in the selective beam melting process for polymer material
AIP Conf. Proc. 1593, 708–712 (2014)
https://doi.org/10.1063/1.4873876
Mechanical analysis of lightweight constructions manufactured with fused deposition modeling
AIP Conf. Proc. 1593, 696–701 (2014)
https://doi.org/10.1063/1.4873874
Characterization of polymer materials and powders for selective laser melting
AIP Conf. Proc. 1593, 702–707 (2014)
https://doi.org/10.1063/1.4873875
Selective light sintering of Aerosol-Jet printed silver nanoparticle inks on polymer substrates
AIP Conf. Proc. 1593, 732–735 (2014)
https://doi.org/10.1063/1.4873881
Improvement of mechanical properties by additive assisted laser sintering of PEEK
AIP Conf. Proc. 1593, 724–727 (2014)
https://doi.org/10.1063/1.4873879
Advanced characterization method of nylon 12 materials for application in laser sinter processing
AIP Conf. Proc. 1593, 713–718 (2014)
https://doi.org/10.1063/1.4873877
Influence of degradation behavior of polyamide 12 powders in laser sintering process on produced parts
AIP Conf. Proc. 1593, 691–695 (2014)
https://doi.org/10.1063/1.4873873
SESSION 03: PROCESSING AND FORMING (COMBINED)
Increased output of blown film extrusion lines by using a cooling sleeve
AIP Conf. Proc. 1593, 111–115 (2014)
https://doi.org/10.1063/1.4873745
Terahertz inline wall thickness monitoring system for plastic pipe extrusion
AIP Conf. Proc. 1593, 86–89 (2014)
https://doi.org/10.1063/1.4873740
Surface pretreatment of plastics with an atmospheric pressure plasma jet - Influence of generator power and kinematics
AIP Conf. Proc. 1593, 106–110 (2014)
https://doi.org/10.1063/1.4873744
Hybrid joining technology - A new method for joining thermoplastic-metal-mixed components
AIP Conf. Proc. 1593, 121–127 (2014)
https://doi.org/10.1063/1.4873747
A new possibility of melt cooling in extrusion dies to prevent sagging-effects in thick-walled pipes
AIP Conf. Proc. 1593, 133–136 (2014)
https://doi.org/10.1063/1.4873749
Mechanisms of shark skin suppression by novel polymer processing aids
AIP Conf. Proc. 1593, 96–100 (2014)
https://doi.org/10.1063/1.4873742
Rotational molding of pultruded profiles reinforced polyethylene
AIP Conf. Proc. 1593, 128–132 (2014)
https://doi.org/10.1063/1.4873748
SESSION 07: NATURAL BASED AND BIODEGRADABLE POLYMERS
Evaluation of the effect of organic pro-degradant concentration in polypropylene exposed to the natural ageing
AIP Conf. Proc. 1593, 329–332 (2014)
https://doi.org/10.1063/1.4873793
Bio-composites based on cellulose acetate and kenaf fibers: Processing and properties
AIP Conf. Proc. 1593, 350–353 (2014)
https://doi.org/10.1063/1.4873798
Crystallization kinetics and thermal resistance of bamboo fiber reinforced biodegradable polymer composites
AIP Conf. Proc. 1593, 316–319 (2014)
https://doi.org/10.1063/1.4873790
Influence of the phase morphology on the weldability of PLA/PBAT-blends by using butt-welding
AIP Conf. Proc. 1593, 312–315 (2014)
https://doi.org/10.1063/1.4873789
Crystallization kinetics of poly-(lactic acid) with and without talc: Optical microscopy and calorimetric analysis
AIP Conf. Proc. 1593, 342–346 (2014)
https://doi.org/10.1063/1.4873796
Preparation and characterization of biodegradable active PLA film for food packaging
AIP Conf. Proc. 1593, 338–341 (2014)
https://doi.org/10.1063/1.4873795
Comparison of melting and crystallization behaviors of polylactide under high-pressure , , and He
AIP Conf. Proc. 1593, 320–323 (2014)
https://doi.org/10.1063/1.4873791
Chain alignment for improved properties - Optimization of PLA and PHB-V by crystallization and reinforcement
AIP Conf. Proc. 1593, 324–328 (2014)
https://doi.org/10.1063/1.4873792
SESSION 05: RHEOLOGY AND RHEOMETRY
The influence of glass fibers on elongational viscosity studied by means of optical coherence tomography and X-ray computed tomography
M. Aigner; D. Salaberger; A. Buchsbaum; B. Heise; S. E. Schausberger; T. Köpplmayr; C. Lang; M. Leitner; D. Stifter; I. Burzic; J. Miethlinger
AIP Conf. Proc. 1593, 217–221 (2014)
https://doi.org/10.1063/1.4873767
50 years of the K-BKZ constitutive relation in polymer rheology and processing
AIP Conf. Proc. 1593, 227–230 (2014)
https://doi.org/10.1063/1.4873769
Robust soft sensor based on an artificial neural network for real-time determination of the melt viscosity of polymers
AIP Conf. Proc. 1593, 213–216 (2014)
https://doi.org/10.1063/1.4873766
SESSION 22: THERMO-MECHANICALLY GRADED MATERIALS
Influence of annealing on the polycarbonate stretching process
AIP Conf. Proc. 1593, 771–775 (2014)
https://doi.org/10.1063/1.4873889
Morphology-property-relationship of thermo-mechanically graded self-reinforced polypropylene composites
AIP Conf. Proc. 1593, 776–779 (2014)
https://doi.org/10.1063/1.4873890
SESSION 11: ELASTOMERS AND THERMOPLASTIC ELASTOMERS
The numerical and experimental study on the compression and transfer molding of rubber materials
AIP Conf. Proc. 1593, 508–511 (2014)
https://doi.org/10.1063/1.4873832
Influence of different components in a TPV PP/EPDM based with low hardness
AIP Conf. Proc. 1593, 526–529 (2014)
https://doi.org/10.1063/1.4873836
Microstructure and thermomechanical properties relationship of segmented thermoplastic polyurethane (TPU)
AIP Conf. Proc. 1593, 520–525 (2014)
https://doi.org/10.1063/1.4873835
Evaluation of rice husk ash as filler in tread compounds
AIP Conf. Proc. 1593, 512–515 (2014)
https://doi.org/10.1063/1.4873833
SESSION 21: DRG: FUNDAMENTAL AND APPLIED RHEOLOGY
Evaluation of thermal gelation behavior of different cellulose ether polymers by rheology
AIP Conf. Proc. 1593, 755–761 (2014)
https://doi.org/10.1063/1.4873886
Wrinkling, tumbling and swinging microcapsules in simple shear flow
AIP Conf. Proc. 1593, 746–749 (2014)
https://doi.org/10.1063/1.4873884
Flow and sol-gel behavior of two types of methylcellulose at various concentrations
AIP Conf. Proc. 1593, 750–754 (2014)
https://doi.org/10.1063/1.4873885
SESSION 19: MANUFACTURING OF LOAD CARRYING HYBRID POLYMER
Process development of injection molded parts with wound fiber structures for local reinforcement
AIP Conf. Proc. 1593, 736–740 (2014)
https://doi.org/10.1063/1.4873882
SESSION 13: POLYMER BLENDS
Recent results and persisting problems in modeling flow induced coalescence
AIP Conf. Proc. 1593, 646–649 (2014)
https://doi.org/10.1063/1.4873862
Influence of electron beam irradiation on mechanical and thermal properties of polypropylene/polyamide blend
AIP Conf. Proc. 1593, 666–669 (2014)
https://doi.org/10.1063/1.4873867
Structural characterization of bi-oriented blown films of polypropylene/polyethylene blends
AIP Conf. Proc. 1593, 650–653 (2014)
https://doi.org/10.1063/1.4873863
Crystallization of PLLA in linear PLLA and star-shaped PLLA blends
AIP Conf. Proc. 1593, 662–665 (2014)
https://doi.org/10.1063/1.4873866
SESSION 17: PLASTIC SOLUTIONS FOR CONSTRUCTION AND HOUSING
Shape stabilised phase change materials (SSPCMs): High density polyethylene and hydrocarbon waxes
AIP Conf. Proc. 1593, 687–690 (2014)
https://doi.org/10.1063/1.4873872
Mechanical fastening solution with a sealing undercut which ensures a uniform force transmission
AIP Conf. Proc. 1593, 683–686 (2014)
https://doi.org/10.1063/1.4873871
SESSION 08: POLYMER FOAMS
Foam injection molding of poly(lactic acid) with physical blowing agents
AIP Conf. Proc. 1593, 397–400 (2014)
https://doi.org/10.1063/1.4873808
Foams from high performance thermoplastic PEN/PES blends with expanded graphite
AIP Conf. Proc. 1593, 358–361 (2014)
https://doi.org/10.1063/1.4873800
Effects of glycerol monosterate on TPUs crystallization and its foaming behavior
AIP Conf. Proc. 1593, 374–377 (2014)
https://doi.org/10.1063/1.4873803
Biopolymer foams - Relationship between material characteristics and foaming behavior of cellulose based foams
AIP Conf. Proc. 1593, 362–366 (2014)
https://doi.org/10.1063/1.4873801
Two approaches for introduction of wheat straw lignin into rigid polyurethane foams
AIP Conf. Proc. 1593, 388–391 (2014)
https://doi.org/10.1063/1.4873806
Development and characterization of piezoresistive porous TPU-MWNT nanocomposites
AIP Conf. Proc. 1593, 383–387 (2014)
https://doi.org/10.1063/1.4873805
Concepts for particle foam based ultralight automotive interior parts
AIP Conf. Proc. 1593, 354–357 (2014)
https://doi.org/10.1063/1.4873799
Microcellular injection molding and particulate leaching of thermoplastic polyurethane (TPU) scaffolds
AIP Conf. Proc. 1593, 392–396 (2014)
https://doi.org/10.1063/1.4873807
SESSION 16: PLASTIC SOLUTIONS FOR E-MOBILITY
Urban e-Mobility - Challenges and potential solutions using the example of the "E3W" concept vehicle
AIP Conf. Proc. 1593, 674–677 (2014)
https://doi.org/10.1063/1.4873869
Tailored benzoxazines as novel resin systems for printed circuit boards in high temperature e-mobility applications
AIP Conf. Proc. 1593, 678–682 (2014)
https://doi.org/10.1063/1.4873870