Skip Nav Destination
Issues
PREFACE: 6th International Conference on Times of Polymers (TOP) and Composites
AIP Conf. Proc. 1459, 1 (2012)
https://doi.org/10.1063/1.4738379
Modeling the Fatigue Behavior of Glass Fiber Reinforced Thermoplastic and Thermosetting Matrices
AIP Conf. Proc. 1459, 372–374 (2012)
https://doi.org/10.1063/1.4745713
On The Inter-Conversion Between Viscoelastic Material Functions of Polycarbonate
AIP Conf. Proc. 1459, 375–377 (2012)
https://doi.org/10.1063/1.4745714
Reactive melt blending of functionalized-MW/CNTs withpolyolefin
AIP Conf. Proc. 1459, 369–371 (2012)
https://doi.org/10.1063/1.4744969
CONTENTS
The temperature dependence of self-adhesion bonding strength for miscible polymers
AIP Conf. Proc. 1459, 324–325 (2012)
https://doi.org/10.1063/1.4738484
Development of new PLA-based biodegradable compounds
AIP Conf. Proc. 1459, 30–32 (2012)
https://doi.org/10.1063/1.4738388
Development of new polymers with ultra-low dielectric constant using gaseous CO2
AIP Conf. Proc. 1459, 157–159 (2012)
https://doi.org/10.1063/1.4738429
Structure and properties of viscous gossypol resin powder
K. S. Negmatova; S. S. Negmatov; Y. A. Salimsakov; H. Y. Rakhimov; J. N. Negmatov; S. S. Isakov; N. S. Kobilov; G. N. Sharifov; M. I. Negmatova
AIP Conf. Proc. 1459, 300–302 (2012)
https://doi.org/10.1063/1.4738476
Healing efficiency of epoxy-based materials for structural application
AIP Conf. Proc. 1459, 223–225 (2012)
https://doi.org/10.1063/1.4738450
Composite materials based on soft organic and inorganic ingredients for increasing the durability of roads
S. S. Negmatov; B. B. Sobirov; B. Sh. Rakhmonov; J. N. Negmatov; K. M. Inoyatov; M. I. Negmatova; J. A. Salimsakov; D. I. Makhkamov; A. D. Soliev
AIP Conf. Proc. 1459, 319–321 (2012)
https://doi.org/10.1063/1.4738482
Aggregation induced emission as a new tool for polymer traceability
AIP Conf. Proc. 1459, 89–91 (2012)
https://doi.org/10.1063/1.4738407
Electrical stress effects on organic thin-film transistor with solution-processed TIPS-pentacene and poly-4-vinylphenol dielectric
Paolo Tassini; Maria Grazia Maglione; Romina Rega; Anna De Girolamo Del Mauro; Tommaso Fasolino; Giuseppe Pandolfi; Enzo Calò; Carla Minarini; Pasqualino Maddalena
AIP Conf. Proc. 1459, 262–264 (2012)
https://doi.org/10.1063/1.4738463
Electrical properties of multi-walled carbon nanotube/tetrafunctional epoxy-amine composites
Biagio De Vivo; Liberata Guadagno; Patrizia Lamberti; Marialuigia Raimondo; Giovanni Spinelli; Vincenzo Tucci; Luigi Vertuccio; Vittoria Vittoria
AIP Conf. Proc. 1459, 199–201 (2012)
https://doi.org/10.1063/1.4738442
Rheology of polysiloxanes filled with getter particles: Effect on moisture adsorption in organic electronics
AIP Conf. Proc. 1459, 136–138 (2012)
https://doi.org/10.1063/1.4738422
Measured-based equivalent RC circuits for simulating the frequency behavior of MWCNT/epoxy nanocomposites
AIP Conf. Proc. 1459, 214–216 (2012)
https://doi.org/10.1063/1.4738447
Enthalpy relaxation of an epoxy matrix/carbon nanotubes
AIP Conf. Proc. 1459, 347–349 (2012)
https://doi.org/10.1063/1.4738492
Modeling and experimental approaches for the characterization of phase equilibria in polymer solutions
AIP Conf. Proc. 1459, 129–131 (2012)
https://doi.org/10.1063/1.4738420
A comparative kinetics study of thermal degradation of some novel ABA block copolymers
AIP Conf. Proc. 1459, 181–183 (2012)
https://doi.org/10.1063/1.4738436
Photoactuation behavior of styrene-b-isoprene-b-styrene filled with covalently modified carbon nanotubes
AIP Conf. Proc. 1459, 193–195 (2012)
https://doi.org/10.1063/1.4738440
Conducting polymer/nanodiamond composites: New opportunities and scientific challenges for material science
Maria Letizia Terranova; Emanuela Tamburri; Valeria Guglielmotti; Francesco Toschi; Silvia Orlanducci; Daniele Passeri; Marco Rossi
AIP Conf. Proc. 1459, 111–113 (2012)
https://doi.org/10.1063/1.4738414
Glass transition and segmental dynamics of ultrathin poly(bisphenol a carbonate) films
AIP Conf. Proc. 1459, 64–67 (2012)
https://doi.org/10.1063/1.4738399
A new index for the prediction of the indentation of composites under low velocity impact loads
AIP Conf. Proc. 1459, 98–100 (2012)
https://doi.org/10.1063/1.4738410
Design of electrospinning mesh devices
AIP Conf. Proc. 1459, 229–231 (2012)
https://doi.org/10.1063/1.4738452
Effect of the aggregate morphology on the dispersability of MWCNTs in polymer melts
AIP Conf. Proc. 1459, 350–352 (2012)
https://doi.org/10.1063/1.4738493
Morphology of LDPE-poly(3-hydroxybutyrate) films
AIP Conf. Proc. 1459, 290–292 (2012)
https://doi.org/10.1063/1.4738473
Biodegradation of high molecular weight polylactic acid
AIP Conf. Proc. 1459, 20–22 (2012)
https://doi.org/10.1063/1.4738385
Effects of zinc oxide nanoparticles on the performancecharacteristics of cotton, polyester and their blends
AIP Conf. Proc. 1459, 356–359 (2012)
https://doi.org/10.1063/1.4738495
Effect of incorporation of carbon nanotubes on the mechanical properties of epoxy-amine composites
AIP Conf. Proc. 1459, 226–228 (2012)
https://doi.org/10.1063/1.4738451
The influence of yarn treatment on the tensile properties of biocomposites
AIP Conf. Proc. 1459, 235–237 (2012)
https://doi.org/10.1063/1.4738454
Broadband dielectric spectrocopy studies of PAMAM-OH dendrimer
AIP Conf. Proc. 1459, 202–204 (2012)
https://doi.org/10.1063/1.4738443
A new approach to raising heat resistance of epoxy nanocomposites
AIP Conf. Proc. 1459, 177–180 (2012)
https://doi.org/10.1063/1.4738435
Different routes to the glass transition: A comparison between chemical and physical vitrification
AIP Conf. Proc. 1459, 33–35 (2012)
https://doi.org/10.1063/1.4738389
Analysis of ageing of amorphous thermoplastic polymers by PVT analysis
AIP Conf. Proc. 1459, 39–41 (2012)
https://doi.org/10.1063/1.4738391
Study on the thermal stability of styrene butadiene rubber nanocomposites
AIP Conf. Proc. 1459, 174–176 (2012)
https://doi.org/10.1063/1.4738434
Conversion of post-industrial PET-PE scraps into compatibilized plastic blends for new applications
AIP Conf. Proc. 1459, 160–162 (2012)
https://doi.org/10.1063/1.4738430
Preparation of synthetic copolymers potentially capable to interact with biomacromolecules
AIP Conf. Proc. 1459, 220–222 (2012)
https://doi.org/10.1063/1.4738449
Preparation and luminescence properties of organogel doped with phen complex
M. Cocca; M. L. Di Lorenzo; M. Avella; G. Gentile; L. Aubouy; M. Della Pirreira; D. Gutiérrez-Tauste; M. Kennedy; J. Doran; B. Norton
AIP Conf. Proc. 1459, 326–328 (2012)
https://doi.org/10.1063/1.4738485
PCL loaded with sol-gel synthesized organic-inorganic hybrid fillers: From the analysis of 2D substrates to the design of 3D rapid prototyped composite scaffolds for tissue engineering
R. De Santis; A. Gloria; T. Russo; U. D’Amora; V. D'Antò; F. Bollino; M. Catauro; F. Mollica; S. Rengo; L. Ambrosio
AIP Conf. Proc. 1459, 26–29 (2012)
https://doi.org/10.1063/1.4738387
Conductive nanocomposite films based on functionalized double-walled carbon nanotubes dispersed in PEDOT:PSS
AIP Conf. Proc. 1459, 259–261 (2012)
https://doi.org/10.1063/1.4738462
Correlation between the crosslink density and mechanical properties of the natural rubber nanocomposites
AIP Conf. Proc. 1459, 83–85 (2012)
https://doi.org/10.1063/1.4738405
Prediction of reinforcement degree for nanocomposites polymer/carbon nanotubes
AIP Conf. Proc. 1459, 335–337 (2012)
https://doi.org/10.1063/1.4738488
Organic LED safe-operating area investigated through high applied field dependences
AIP Conf. Proc. 1459, 92–94 (2012)
https://doi.org/10.1063/1.4738408
Polyaniline nanofibers: Towards pure electrospun PANI
AIP Conf. Proc. 1459, 253–255 (2012)
https://doi.org/10.1063/1.4738460
Photoluminescence and energy transfer in PVK/DCM blends
AIP Conf. Proc. 1459, 95–97 (2012)
https://doi.org/10.1063/1.4738409
Space resolved relaxation dynamics of poly(vinyl acetate) close to interfaces with SiOx nanoinclusions
AIP Conf. Proc. 1459, 217–219 (2012)
https://doi.org/10.1063/1.4738448
Biodegradable composites filled with halloysite nanonotubes: Calorimetric investigations and structural issues
AIP Conf. Proc. 1459, 23–25 (2012)
https://doi.org/10.1063/1.4738386
Mode I fracture toughness behavior of hydro-thermally aged carbon fibre reinforced DGEBA-HHPA-PES systems
AIP Conf. Proc. 1459, 117–119 (2012)
https://doi.org/10.1063/1.4738416
Ageing of a neutron shielding used in transport/storage casks
AIP Conf. Proc. 1459, 120–122 (2012)
https://doi.org/10.1063/1.4738417
ITO-free polymer solar cells with inkjet-printed highly-conductive PEDOT:PSS anode
I. A. Grimaldi; A. De Girolamo Del Mauro; R. Diana; F. Loffredo; P. Morvillo; F. Villani; C. Minarini
AIP Conf. Proc. 1459, 167–169 (2012)
https://doi.org/10.1063/1.4738432
Linear viscoelasticity of polymer-graphite nanoplatelets (GNPs) nanocomposites
AIP Conf. Proc. 1459, 139–141 (2012)
https://doi.org/10.1063/1.4738423
Diffusion of mineral oils in ethylene-vinyl acetate copolymer
AIP Conf. Proc. 1459, 42–44 (2012)
https://doi.org/10.1063/1.4738392
Effect of clay on structure of epoxy/PCL nanocomposite: In situ optical microscopy study
AIP Conf. Proc. 1459, 244–246 (2012)
https://doi.org/10.1063/1.4738457
Gas sorption in poly-(2,6-dimethyl-1,4-phenylene)oxide containing nanoporous crystalline phases
AIP Conf. Proc. 1459, 48–50 (2012)
https://doi.org/10.1063/1.4738394
UV-induced [2+2]-cycloaddition for shell-formation of starpolymers
AIP Conf. Proc. 1459, 360–362 (2012)
https://doi.org/10.1063/1.4738496
Crosslinking and ageing of ethylene-vinyl silane copolymer in water bath
AIP Conf. Proc. 1459, 55–57 (2012)
https://doi.org/10.1063/1.4738396
1,2-diketones promoted degradation of poly(epsilon-caprolactone)
AIP Conf. Proc. 1459, 196–198 (2012)
https://doi.org/10.1063/1.4738441
Relaxation times of nano-colloid flocculation induced by adsorbing and non-adsorbing polymers
AIP Conf. Proc. 1459, 14–16 (2012)
https://doi.org/10.1063/1.4738383
Fluorescent dye-labelled polymer synthesis by nitroxide mediated radical polymerization
AIP Conf. Proc. 1459, 187–189 (2012)
https://doi.org/10.1063/1.4738438
Novel class of eco-flame retardants based on the renewable raw materials
AIP Conf. Proc. 1459, 316–318 (2012)
https://doi.org/10.1063/1.4738481
HDPE-HA composites synthetized by in situ polymerization with different filler content
AIP Conf. Proc. 1459, 104–106 (2012)
https://doi.org/10.1063/1.4738412
Rheological characterization of polyolefin composites with reduced flammability
AIP Conf. Proc. 1459, 268–270 (2012)
https://doi.org/10.1063/1.4738465
Temperature dependence of structural relaxation time in drawn polymers: Which is the role of cooperativity?
AIP Conf. Proc. 1459, 211–213 (2012)
https://doi.org/10.1063/1.4738446
Cellulose based hybrid hydroxylated adducts for polyurethane foams
Laura De Pisapia; Letizia Verdolotti; Eduardo Di Mauro; Ernesto Di Maio; Marino Lavorgna; Salvatore Iannace
AIP Conf. Proc. 1459, 123–125 (2012)
https://doi.org/10.1063/1.4738418
Synthesis, characterization and molecular dynamic simulation on dendronized poly(diphtalimidoalky phenyl) methacrylates
AIP Conf. Proc. 1459, 322–323 (2012)
https://doi.org/10.1063/1.4738483
Finite element calculation of residual stress in dental restorative material
AIP Conf. Proc. 1459, 312–315 (2012)
https://doi.org/10.1063/1.4738480
A study of the time dependence of the post yield behavior of a syndiotactic polypropilene
AIP Conf. Proc. 1459, 338–340 (2012)
https://doi.org/10.1063/1.4738489
Damage initiated self-healing in ionomer blends
Md. Arifur Rahman; Maurizio Penco; Gloria Spagnoli; Isabella Peroni; Giorgio Ramorino; Luciana Sartore; Fabio Bignotti; Luca Di Landro
AIP Conf. Proc. 1459, 163–166 (2012)
https://doi.org/10.1063/1.4738431
Effect of clay induced morphological transitions on behaviour of epoxy/PCL nanocomposite
AIP Conf. Proc. 1459, 80–82 (2012)
https://doi.org/10.1063/1.4738404
Cold-plasma assisted hydrophobisation of cellulose fibres with styrene and para-halogenated homologues
AIP Conf. Proc. 1459, 286–289 (2012)
https://doi.org/10.1063/1.4738471
Quantitative analysis of surface irregularities resulting from flow-induced separation of highly filled compounds
AIP Conf. Proc. 1459, 145–147 (2012)
https://doi.org/10.1063/1.4738425
Investigation on thermoformability of PLA by rheological and hot tensile tests
AIP Conf. Proc. 1459, 274–276 (2012)
https://doi.org/10.1063/1.4738467
Influence of the nanoparticle surface polarity on the flow behavior of polymer matrix composites
AIP Conf. Proc. 1459, 101–103 (2012)
https://doi.org/10.1063/1.4738411
Antimicrobial polymer films for food packaging
AIP Conf. Proc. 1459, 256–258 (2012)
https://doi.org/10.1063/1.4738461
Preparation and characterization of mesh membranes using electrospinning technique
AIP Conf. Proc. 1459, 232–234 (2012)
https://doi.org/10.1063/1.4738453
Silver nanoparticle synthesis in polymer matrices of various internal structures
AIP Conf. Proc. 1459, 250–252 (2012)
https://doi.org/10.1063/1.4738459
Clay-filled bio-based blends of poly(lactic acid) and polyamide 11
AIP Conf. Proc. 1459, 208–210 (2012)
https://doi.org/10.1063/1.4738445
Rolling contact fatigue of various unfilled and fiber reinforced polymers
AIP Conf. Proc. 1459, 303–305 (2012)
https://doi.org/10.1063/1.4738477
Design of new polymeric formulations for drug nanocarriers
AIP Conf. Proc. 1459, 45–47 (2012)
https://doi.org/10.1063/1.4738393
Study of aging in pentacene/CYTOP based metal-insulator-semiconductor photosensors
AIP Conf. Proc. 1459, 265–267 (2012)
https://doi.org/10.1063/1.4738464
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.