Skip Nav Destination
Issues
Preface: Advances in Cryogenic Engineering (Chief Technical Editor: U. (Balu) Balachandran
AIP Conf. Proc. 1435, 1–2 (2012)
https://doi.org/10.1063/1.4712076
BSCCO AND MGB2 CONDUCTORS
Studies of porosity, connectivity, and parasitic phases in textured Bi-2212/Ag after non-melt heat treatments
AIP Conf. Proc. 1435, 332–339 (2012)
https://doi.org/10.1063/1.4712113
Fabrication and characterization of green-state Bi-2212 ribbons
AIP Conf. Proc. 1435, 325–331 (2012)
https://doi.org/10.1063/1.4712112
Effect of proton irradiation on the critical current and critical temperature of Bi-2212 wires
AIP Conf. Proc. 1435, 346–352 (2012)
https://doi.org/10.1063/1.4712115
The cabling of MgB2 hollow wires by react and wind process
AIP Conf. Proc. 1435, 363–368 (2012)
https://doi.org/10.1063/1.4712117
Effect of pre-annealing in thermal processing of Bi-2212 round wires
F. J. Baca; T. G. Holesinger; J. Y. Coulter; H. Miao; Y. Huang; J. Parrell; S. Campbell; J. Searcy; E. Sooby; J. Kennison; R. DePaula; I. Apodaca; K. Marken
AIP Conf. Proc. 1435, 340–345 (2012)
https://doi.org/10.1063/1.4712114
Development of Bi-2212 round wires for high field magnet applications
AIP Conf. Proc. 1435, 315–324 (2012)
https://doi.org/10.1063/1.4712111
CONDUCTORS FOR LARGE-SCALE APPLICATIONS
A Nb0.36Ti0.64 superconductor with ferromagnetic artificial pinning centers for low magnetic field applications
AIP Conf. Proc. 1435, 174–181 (2012)
https://doi.org/10.1063/1.4712094
Low-temperature neutron irradiation tests of superconducting magnet materials using reactor neutrons at KUR
M. Yoshida; T. Nakamoto; T. Ogitsu; Q. Xu; T. Itahashi; Y. Kuno; Y. Kuriyama; Y. Mori; B. Qin; A. Sato; K. Sato; T. Yoshiie
AIP Conf. Proc. 1435, 167–173 (2012)
https://doi.org/10.1063/1.4712093
ELECTROMAGNETIC AND ELECTROMECHANICAL PROPERTIES OF CONDUCTORS AND COILS
Transport property measurement of practical coated conductor with copper stabilizer
AIP Conf. Proc. 1435, 258–264 (2012)
https://doi.org/10.1063/1.4712104
Fundamental simulations of transverse load effects on Nb3Sn strands using finite element analysis
AIP Conf. Proc. 1435, 243–251 (2012)
https://doi.org/10.1063/1.4712102
Compact 20 T superconducting magnet for a 50 T-class hybrid magnet
AIP Conf. Proc. 1435, 252–257 (2012)
https://doi.org/10.1063/1.4712103
Investigation of twisted stacked-tape cable conductor
AIP Conf. Proc. 1435, 273–280 (2012)
https://doi.org/10.1063/1.4712106
LOW-TEMPERATURE SUPERCONDUCTORS
Fast neutron irradiation effect on superconducting properties of Nb3Sn and Nb3Al strands
AIP Conf. Proc. 1435, 217–224 (2012)
https://doi.org/10.1063/1.4712099
Measurements of Nb3Sn conductor dimension changes during heat treatment
AIP Conf. Proc. 1435, 193–200 (2012)
https://doi.org/10.1063/1.4712096
Procedures for evaluating filament cracking during fatigue testing of Nb3Sn strand
M. K. Sheth; Peter Lee; D. M. McRae; Robert Walsh; W. L. Starch; M. C. Jewell; A. Devred; D. C. Larbalestier
AIP Conf. Proc. 1435, 201–208 (2012)
https://doi.org/10.1063/1.4712097
MECHANICAL PROPERTIES OF ALLOYS AT LOW-TEMPERATURES
Fatigue crack growth rate and fracture toughness of ITER central solenoid jacket materials at 7 K
AIP Conf. Proc. 1435, 47–54 (2012)
https://doi.org/10.1063/1.4712079
Effect of specimen shape on the elongation of 316LN jacket used in the ITER toroidal field coil
AIP Conf. Proc. 1435, 55–62 (2012)
https://doi.org/10.1063/1.4712080
Estimation of tensile strengths at 4K of 316LN forging and hot rolled plate for the ITER toroidal field coils
AIP Conf. Proc. 1435, 70–77 (2012)
https://doi.org/10.1063/1.4712082
Cold work study on a 316LN modified alloy for the ITER TF coil conduit
AIP Conf. Proc. 1435, 63–69 (2012)
https://doi.org/10.1063/1.4712081
NEW MATERIALS
Low temperature electrical transport properties in dilute 2D GaAs hole systems with magnetic field
AIP Conf. Proc. 1435, 385–392 (2012)
https://doi.org/10.1063/1.4712120
Cryogenic thermal expansion and electrical conductivities of Mn3CuN co-doped with Sb and Sn
AIP Conf. Proc. 1435, 393–400 (2012)
https://doi.org/10.1063/1.4712121
Stydy of variable range hopping conduction in insulating n-type InSb semiconductor at very low temperature
AIP Conf. Proc. 1435, 377–384 (2012)
https://doi.org/10.1063/1.4712119
Study of electrical resistivity in 2D Si-MOSFETS at very low temperature
AIP Conf. Proc. 1435, 401–408 (2012)
https://doi.org/10.1063/1.4712122
METALS AND INSULATORS AT LOW-TEMPERATURES
Magnetoresistance of 5N, 6N, and 6N8 high purity aluminum
AIP Conf. Proc. 1435, 140–147 (2012)
https://doi.org/10.1063/1.4712090
Tensile tests of ITER TF conductors jacket materials
O. P. Anashkin; V. E. Kеilin; A. V. Krivykh; D. N. Diev; A. S. Dinisilov; V. I. Shcherbakov; V. I. Tronza
AIP Conf. Proc. 1435, 117–124 (2012)
https://doi.org/10.1063/1.4712087
Determination of mechanical and thermal properties of electrical insulation material at 4.2 K
AIP Conf. Proc. 1435, 148–155 (2012)
https://doi.org/10.1063/1.4712091
Effect of cryogenic treatment on thermal conductivity properties of copper
AIP Conf. Proc. 1435, 133–139 (2012)
https://doi.org/10.1063/1.4712089
Mechanical properties of cold-rolled and aged MP35N alloys for cryogenic magnet applications
AIP Conf. Proc. 1435, 125–132 (2012)
https://doi.org/10.1063/1.4712088
Cryogenic properties of hollow glass microsphere/epoxy composites
AIP Conf. Proc. 1435, 156–163 (2012)
https://doi.org/10.1063/1.4712092
SRF MATERIALS
Studies on thin film MgB2 for applications to RF structures for particle accelerators
T. Tajima; N. F. Haberkorn; L. Civale; R. K. Schulze; H. Inoue; J. Guo; V. A. Dolgashev; D. Martin; S. Tantawi; C. Yoneda; B. Moeckly; C. Yung; T. Proslier; M. Pellin; A. Matsumoto; E. Watanabe
AIP Conf. Proc. 1435, 297–304 (2012)
https://doi.org/10.1063/1.4712109
Analysis of materials properties of niobium tube from the results of a virtual bulge test
AIP Conf. Proc. 1435, 305–312 (2012)
https://doi.org/10.1063/1.4712110
Annealing to mitigate pitting in electropolished niobium coupons and SRF cavities
AIP Conf. Proc. 1435, 289–296 (2012)
https://doi.org/10.1063/1.4712108
REVIEW OF SUPERCONDUCTOR TECHNOLOGY
RESINS AND COMPOSITES AT LOW-TEMPERATURES
Assessment of possible failure modes and non-destructive examination of the ITER pre-compression rings
AIP Conf. Proc. 1435, 89–98 (2012)
https://doi.org/10.1063/1.4712084
Qualification of a cyanate ester epoxy blend supplied by Japanese industry for the ITER TF coil insulation
AIP Conf. Proc. 1435, 107–114 (2012)
https://doi.org/10.1063/1.4712086
Front Matter for Volume 1435
AIP Conf. Proc. 1435, frontmatter (2012)
https://doi.org/10.1063/v1435.frontmatter
Back Matter for Volume 1435
AIP Conf. Proc. 1435, backmatter (2012)
https://doi.org/10.1063/v1435.backmatter
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Students’ mathematical conceptual understanding: What happens to proficient students?
Dian Putri Novita Ningrum, Budi Usodo, et al.