Skip Nav Destination
Issues
Back Matter for Volume 1353
AIP Conf. Proc. 1353, backmatter (2011)
https://doi.org/10.1063/v1353.backmatter
Front Matter for Volume 1353
AIP Conf. Proc. 1353, frontmatter (2011)
https://doi.org/10.1063/v1353.frontmatter
On the thermomechanical modelling of multiphase materials during heat treatments and subsequent forming
AIP Conf. Proc. 1353, 1568–1573 (2011)
https://doi.org/10.1063/1.3589740
A space‐time concept for martensitic phase transformation based on statistical physics
AIP Conf. Proc. 1353, 97–102 (2011)
https://doi.org/10.1063/1.3589498
A Combined Structural and Electromechanical FE Approach for Industrial Ultrasonic Devices Design
AIP Conf. Proc. 1353, 1361–1366 (2011)
https://doi.org/10.1063/1.3589706
Effect of Ultrasonic Treatment on the Microstructure of A201 Aluminium Alloy for Thixoforming
AIP Conf. Proc. 1353, 1063–1068 (2011)
https://doi.org/10.1063/1.3589657
Manufacturing of SiCp Reinforced Magnesium Composite Tubes by Hot Extrusion Processes
AIP Conf. Proc. 1353, 1644–1649 (2011)
https://doi.org/10.1063/1.3589752
Influence of process parameters on the weld lines formation in rapid heat cycle molding
AIP Conf. Proc. 1353, 797–802 (2011)
https://doi.org/10.1063/1.3589613
Design of inductors in electromagnetic casting using topological derivatives
AIP Conf. Proc. 1353, 17–22 (2011)
https://doi.org/10.1063/1.3589485
Abrasive Wear Resistance of Tool Steels Evaluated by the Pin‐on‐Disc Testing
AIP Conf. Proc. 1353, 1753–1758 (2011)
https://doi.org/10.1063/1.3589769
Friction and wear mechanisms study on a newly developed High Speed Tribometer
AIP Conf. Proc. 1353, 1759–1764 (2011)
https://doi.org/10.1063/1.3589770
Thick Plate Rolling—a Numerical Approach in Comparison with Analytics and Experimental Data
AIP Conf. Proc. 1353, 1350–1355 (2011)
https://doi.org/10.1063/1.3589704
Simulation of a Full Forward Extrusion Process from Metal Strip
AIP Conf. Proc. 1353, 493–498 (2011)
https://doi.org/10.1063/1.3589563
Process design of press hardening with gradient material property influence
AIP Conf. Proc. 1353, 1562–1567 (2011)
https://doi.org/10.1063/1.3589739
The Influence of High Pressure Thermal Behavior on Friction‐induced material transfer During Dry Machining of Titanium
AIP Conf. Proc. 1353, 1806–1811 (2011)
https://doi.org/10.1063/1.3589778
Numerical Predictions of Surface Damage During Bulk Forming Operations
AIP Conf. Proc. 1353, 1735–1740 (2011)
https://doi.org/10.1063/1.3589766
Tribological Testing of Anti‐Adhesive coatings for Cold Rolling Mill Rolls—Application to TiN‐Coated Rolls
AIP Conf. Proc. 1353, 1747–1752 (2011)
https://doi.org/10.1063/1.3589768
Friction Spinning—New Innovative Tool Systems For The Production of Complex Functionally Graded Workpieces
AIP Conf. Proc. 1353, 177–182 (2011)
https://doi.org/10.1063/1.3589511
Estimation of three‐dimensional distribution of heat flux on the pin frictional surface during a pin on disc test
AIP Conf. Proc. 1353, 1137–1142 (2011)
https://doi.org/10.1063/1.3589669
On the implementation of the continuum shell finite element SHB8PS and application to sheet forming simulation
AIP Conf. Proc. 1353, 1203–1208 (2011)
https://doi.org/10.1063/1.3589680
Competition of Flow and Thermal Effects During Crystallization of Polymers: Influence on Morphology
AIP Conf. Proc. 1353, 1149–1154 (2011)
https://doi.org/10.1063/1.3589671
On a New Optimization Approach for the Hydroforming of Defects‐Free Tubular Metallic Parts
AIP Conf. Proc. 1353, 1689–1694 (2011)
https://doi.org/10.1063/1.3589759
Numerical simulation of multi‐layered textile composite reinforcement forming
AIP Conf. Proc. 1353, 918–923 (2011)
https://doi.org/10.1063/1.3589633
A novel method of multi‐scale simulation of macro‐scale deformation and microstructure evolution on metal forming
AIP Conf. Proc. 1353, 103–108 (2011)
https://doi.org/10.1063/1.3589499
Net‐Shape Forging of Aerofoil Blade based on Flash Trimming and Compensation methods
AIP Conf. Proc. 1353, 1677–1682 (2011)
https://doi.org/10.1063/1.3589757
A Digital Methodology for the Design Process of Aerospace Assemblies with Sustainable Composite Processes & Manufacture
AIP Conf. Proc. 1353, 1683–1688 (2011)
https://doi.org/10.1063/1.3589758
Quality Parameters Defined by Chebyshev Polynomials in Cold Rolling Process Chain
AIP Conf. Proc. 1353, 368–373 (2011)
https://doi.org/10.1063/1.3589543
Integrated piezoelectric actuators in deep drawing tools to reduce the try‐out
AIP Conf. Proc. 1353, 189–194 (2011)
https://doi.org/10.1063/1.3589513
Optimisation of the blank shape for micro deep drawing of rectangular parts
AIP Conf. Proc. 1353, 523–528 (2011)
https://doi.org/10.1063/1.3589568
A Process for Semi‐Solid Moulding of High Viscosity Thermoplastic Polymers
AIP Conf. Proc. 1353, 547–552 (2011)
https://doi.org/10.1063/1.3589572
Laser Surface Modification of H13 Die Steel using Different Laser Spot Sizes
AIP Conf. Proc. 1353, 1081–1086 (2011)
https://doi.org/10.1063/1.3589660
Identification of Rubber‐like Behaviour from Non Homogeneous Multiaxial Testing
AIP Conf. Proc. 1353, 702–707 (2011)
https://doi.org/10.1063/1.3589597
Experimental and Numerical Studies on the Formability of Materials in Hot Stamping and Cold Die Quenching Processes
AIP Conf. Proc. 1353, 1555–1561 (2011)
https://doi.org/10.1063/1.3589738
Digital Method of Analyzing the Bending Stiffness of Non‐Crimp Fabrics
AIP Conf. Proc. 1353, 913–917 (2011)
https://doi.org/10.1063/1.3589632
Thermal Contact Resistance Estimation: Influence of the Pressure Contact and the Coating Layer during a Hot Forming Process
AIP Conf. Proc. 1353, 1107–1112 (2011)
https://doi.org/10.1063/1.3589664
Study of Forming of Magnesium Alloy by Explosive Energy
AIP Conf. Proc. 1353, 1615–1619 (2011)
https://doi.org/10.1063/1.3589747
Finite Element Modeling and Optimization of Mechanical Joining Technology
AIP Conf. Proc. 1353, 1247–1252 (2011)
https://doi.org/10.1063/1.3589687
Micro Electro Discharge Machining of Electrically Nonconductive Ceramics
AIP Conf. Proc. 1353, 1303–1308 (2011)
https://doi.org/10.1063/1.3589696
Use of Monocrystalline Silicon as Tool Material for Highly Accurate Blanking of Thin Metal Foils
AIP Conf. Proc. 1353, 481–486 (2011)
https://doi.org/10.1063/1.3589561
A Viscoplastic Material Model Based on Overstress for the Simulation of Incremental Sheet Forming of Thermoplastics
AIP Conf. Proc. 1353, 803–808 (2011)
https://doi.org/10.1063/1.3589614
Multilayered Glass Fibre‐reinforced Composites In Rotational Moulding
AIP Conf. Proc. 1353, 708–713 (2011)
https://doi.org/10.1063/1.3589598
Build Validation Methods for Composite Assemblies Using Simulated Part Form Prediction
AIP Conf. Proc. 1353, 1002–1007 (2011)
https://doi.org/10.1063/1.3589647
Shrinkage Study of Polypropylene Films Laminated on Steel‐Influence of the Conformation Processes
AIP Conf. Proc. 1353, 744–749 (2011)
https://doi.org/10.1063/1.3589604
Physically Based Kinematic Hardening Modelling of Single Crystal
AIP Conf. Proc. 1353, 91–96 (2011)
https://doi.org/10.1063/1.3589497
Fundamental Study on Microstructure Control by Combination of Nano Plastic Forming and Annealing
AIP Conf. Proc. 1353, 133–138 (2011)
https://doi.org/10.1063/1.3589504
Effect of Clay Amounts on Morphology and Mechanical Performances in Multiscale PET Composites
AIP Conf. Proc. 1353, 779–784 (2011)
https://doi.org/10.1063/1.3589610
Study of the Thermal Behavior of Syndiotactic and Atactic Polystyrene By Raman Spectroscopy
AIP Conf. Proc. 1353, 856–861 (2011)
https://doi.org/10.1063/1.3589623
Residual Stresses in DC cast Aluminum Billet: Neutron Diffraction Measurements and Thermomechanical Modeling
AIP Conf. Proc. 1353, 1131–1136 (2011)
https://doi.org/10.1063/1.3589668
Deformation Mechanisms in Tube Billets from Zr‐1%Nb Alloy under Radial Forging
AIP Conf. Proc. 1353, 404–409 (2011)
https://doi.org/10.1063/1.3589549
The Effect of transient change in strain rate on plastic flow behaviour of Al‐Mg‐Si alloy at elevated temperatures
AIP Conf. Proc. 1353, 374–379 (2011)
https://doi.org/10.1063/1.3589544
Optimization of Design and Manufacturing Process of Metal Foam Filled Anti‐Intrusion Bars
AIP Conf. Proc. 1353, 1656–1661 (2011)
https://doi.org/10.1063/1.3589754
Towards the effective behaviour of polycrystalline materials for sheet bulk metal forming processes
AIP Conf. Proc. 1353, 1179–1184 (2011)
https://doi.org/10.1063/1.3589676
Draw‐Bending Analysis of a Cold Rolled DP980 Steel Sheet
AIP Conf. Proc. 1353, 1405–1410 (2011)
https://doi.org/10.1063/1.3589713
The large strain response of polypropylene in multiaxial stretching and stress relaxation
AIP Conf. Proc. 1353, 850–855 (2011)
https://doi.org/10.1063/1.3589622
Failure prediction method for hydro forming simulation of thick walled tubes
AIP Conf. Proc. 1353, 295–300 (2011)
https://doi.org/10.1063/1.3589531
Formability of Wrought Magnesium Alloys by Hot Compression Testing and Laboratory‐Scale Extrusion
AIP Conf. Proc. 1353, 413–418 (2011)
https://doi.org/10.1063/1.3589550
First Results of Energy Saving at Process Redesign of Die Forging Al‐Alloys
AIP Conf. Proc. 1353, 1626–1631 (2011)
https://doi.org/10.1063/1.3589749
Constraint Optimization Problem For The Cutting Of A Cobalt Chrome Refractory Material
AIP Conf. Proc. 1353, 603–608 (2011)
https://doi.org/10.1063/1.3589581
A Comparative Analysis of Different Robust Design Approaches in Sheet Stamping Operations
AIP Conf. Proc. 1353, 53–58 (2011)
https://doi.org/10.1063/1.3589491
Characterization of Friction Stir Welded Tubes by Means of Tube Bulge Test
AIP Conf. Proc. 1353, 1259–1264 (2011)
https://doi.org/10.1063/1.3589689
Joining of Aluminium Alloy Sheets by Rectangular Mechanical Clinching
AIP Conf. Proc. 1353, 1253–1258 (2011)
https://doi.org/10.1063/1.3589688
New distortional hardening model capable of predicting eight ears for textured aluminum sheet
AIP Conf. Proc. 1353, 1399–1404 (2011)
https://doi.org/10.1063/1.3589712
An in‐plane tensile test for rheological and formability identification: comparison between experimental and numerical FLC
AIP Conf. Proc. 1353, 1535–1540 (2011)
https://doi.org/10.1063/1.3589735
The influence of uniaxial prestrain on biaxial r‐values in 7075‐O aluminium alloy
AIP Conf. Proc. 1353, 1435–1440 (2011)
https://doi.org/10.1063/1.3589718
Hole Expansion of Aluminum Alloys for the Automotive Industry
AIP Conf. Proc. 1353, 1488–1493 (2011)
https://doi.org/10.1063/1.3589727
Anti‐friction Coating for Drilling of Green Austempered Ductile Iron (ADI) grade
AIP Conf. Proc. 1353, 1800–1805 (2011)
https://doi.org/10.1063/1.3589777
Vapor‐melt Ratio in Laser Fine Cutting of Slot Arrays
AIP Conf. Proc. 1353, 657 (2011)
https://doi.org/10.1063/1.3589590
Dry vs. Cryogenic Orthogonal Hard Machining: an Experimental Investigation
AIP Conf. Proc. 1353, 627–632 (2011)
https://doi.org/10.1063/1.3589585
Research about Elastic Mechanism of Error Generation in Ball End Milling based in Geometric Analysis
AIP Conf. Proc. 1353, 573–578 (2011)
https://doi.org/10.1063/1.3589576
Prediction of Cutting Forces Using ANNs Approach in Hard Turning of AISI 52100 steel
AIP Conf. Proc. 1353, 669–674 (2011)
https://doi.org/10.1063/1.3589592
Modelling and Development of a High Performance Milling Process with Monolithic Cutting Tools
AIP Conf. Proc. 1353, 663 (2011)
https://doi.org/10.1063/1.3589591
Modelling Of Residual Stresses Induced By High Speed Milling Process
AIP Conf. Proc. 1353, 597–602 (2011)
https://doi.org/10.1063/1.3589580
Use of Additional Needle Pulses Using Electrical Discharge Machining
AIP Conf. Proc. 1353, 1344–1349 (2011)
https://doi.org/10.1063/1.3589703
Factoring Acting on the Tool Wear at Various Dimensional Structures during the Electro‐Discharge Machining
AIP Conf. Proc. 1353, 1313–1318 (2011)
https://doi.org/10.1063/1.3589698
Prediction of Thermal Residual Stresses with a Thermo‐physical Model of Electrical Discharge Machining Process
AIP Conf. Proc. 1353, 1373–1378 (2011)
https://doi.org/10.1063/1.3589708
No‐flow temperature and solidification in injection molding simulation
AIP Conf. Proc. 1353, 689–693 (2011)
https://doi.org/10.1063/1.3589595
Measuring the Shear‐Tension Coupling of Engineering Fabrics
AIP Conf. Proc. 1353, 889–894 (2011)
https://doi.org/10.1063/1.3589628
Ductile damage parameters identification for cold metal forming applications
AIP Conf. Proc. 1353, 47–52 (2011)
https://doi.org/10.1063/1.3589490
Numerical Simulations of Asperity Crushing—Application to cold rolling
AIP Conf. Proc. 1353, 1770–1775 (2011)
https://doi.org/10.1063/1.3589772
Experimental and Numerical Analysis on the Distortion of Parts Made of 20MnCr5 by Hot Metal Forming
AIP Conf. Proc. 1353, 351–356 (2011)
https://doi.org/10.1063/1.3589540
INVESTIGATION OF THE INFLUENCE OF TOOL GEOMETRY ON EFFECTIVE STRAIN DISTRIBUTION IN FULL FORWARD EXTRUSION
AIP Conf. Proc. 1353, 419–424 (2011)
https://doi.org/10.1063/1.3589551
Flatness Defects after Stretching: a Numerical Analysis of Leveling
AIP Conf. Proc. 1353, 276–281 (2011)
https://doi.org/10.1063/1.3589528
A multi‐scale friction model framework for full scale sheet forming simulations
AIP Conf. Proc. 1353, 207–212 (2011)
https://doi.org/10.1063/1.3589516
Optical measurement and modelling of parison sag and swell in blow moulding
AIP Conf. Proc. 1353, 683–688 (2011)
https://doi.org/10.1063/1.3589594
The Geometry Definition Influence in Inverse Analysis—Application to Carter Forming Process
AIP Conf. Proc. 1353, 65–70 (2011)
https://doi.org/10.1063/1.3589493
Process Chains in Microforming Technology Using Scaling Effects
AIP Conf. Proc. 1353, 535–540 (2011)
https://doi.org/10.1063/1.3589570
FE‐Analysis of Stretch‐Blow Moulded Bottles Using an Integrative Process Simulation
AIP Conf. Proc. 1353, 868–873 (2011)
https://doi.org/10.1063/1.3589625
Simulation of Forming and Wrinkling of Textile Composite Reinforcements
AIP Conf. Proc. 1353, 942–947 (2011)
https://doi.org/10.1063/1.3589637
New progress in the modelling of stretching flows in a stress‐crystallising polymer
AIP Conf. Proc. 1353, 720–725 (2011)
https://doi.org/10.1063/1.3589600
Strain heterogeneity and local anisotropy in TWIP steels
AIP Conf. Proc. 1353, 145–150 (2011)
https://doi.org/10.1063/1.3589506
Proper Generalized Decomposition Based Dynamic Data‐Driven Control of Material Forming Processes
AIP Conf. Proc. 1353, 1163–1168 (2011)
https://doi.org/10.1063/1.3589673
Formability analysis of aluminum alloy sheets at elevated temperatures with numerical simulation based on the M‐K method
AIP Conf. Proc. 1353, 1517–1522 (2011)
https://doi.org/10.1063/1.3589732
Adaptive Smoothed Finite Elements (ASFEM) for history dependent material models
AIP Conf. Proc. 1353, 1197–1202 (2011)
https://doi.org/10.1063/1.3589679
A statistically based methodology in the identification of friction welding parameters
AIP Conf. Proc. 1353, 41–46 (2011)
https://doi.org/10.1063/1.3589489
Constitutive Modelling and Springback Prediction in Creep Age Forming of AA7055 Doubly Curved Panels
AIP Conf. Proc. 1353, 235 (2011)
https://doi.org/10.1063/1.3589521
Investigation of Forming Strategies to Set up Mechanical Properties of Parts Made by Incremental Sheet Bulk Rolling
AIP Conf. Proc. 1353, 195–200 (2011)
https://doi.org/10.1063/1.3589514
Effect of Sheet Mechanical Properties on Forming Limits in Presence of a Through‐Thickness Stress
AIP Conf. Proc. 1353, 171–176 (2011)
https://doi.org/10.1063/1.3589510
Characterization Of Flow Stress Of Different AA6082 Alloys By Means Of Hot Torsion Test
AIP Conf. Proc. 1353, 455–460 (2011)
https://doi.org/10.1063/1.3589557
Investigation And Prediction of Grain Texture Evolution in AA6082
AIP Conf. Proc. 1353, 449–454 (2011)
https://doi.org/10.1063/1.3589556
Micro Machining of Different Steels with Closed Electrolytic Free Jet
AIP Conf. Proc. 1353, 1337–1343 (2011)
https://doi.org/10.1063/1.3589702
Mechanical Properties and Deformability During the Preforming of a flax reinforcement
AIP Conf. Proc. 1353, 990–995 (2011)
https://doi.org/10.1063/1.3589645
Identification of a Visco‐Elastic Model for PET Near Based on Uni and Biaxial Results
AIP Conf. Proc. 1353, 750–755 (2011)
https://doi.org/10.1063/1.3589605
Strain gradient plasticity theory applied to machining
AIP Conf. Proc. 1353, 591–596 (2011)
https://doi.org/10.1063/1.3589579
Modeling of anisotropy induced by evolution of dislocation microstructures on different scales
AIP Conf. Proc. 1353, 121–126 (2011)
https://doi.org/10.1063/1.3589502
Development and Investigation of a Modular Tool Concept Based on Polymer Elements
AIP Conf. Proc. 1353, 282–287 (2011)
https://doi.org/10.1063/1.3589529
Development of a Constitutive Model of Polypropylene for Thermoforming
AIP Conf. Proc. 1353, 874–879 (2011)
https://doi.org/10.1063/1.3589626
In situ consolidation for thermoplastic tape placement process is not obvious
AIP Conf. Proc. 1353, 948–953 (2011)
https://doi.org/10.1063/1.3589638
Preparation and Properties of Polyphenylene Sulfide/Multi‐walled Carbon Nanotube Composites
AIP Conf. Proc. 1353, 996–1001 (2011)
https://doi.org/10.1063/1.3589646
A Two‐Scale Approach for Simulation of Forming Processes for Polymer Nanocomposites
AIP Conf. Proc. 1353, 1226–1231 (2011)
https://doi.org/10.1063/1.3589684
Thermal and Kinetic Modelling of Elastomer Flow—Application to an Extrusion Die
AIP Conf. Proc. 1353, 1101–1106 (2011)
https://doi.org/10.1063/1.3589663
On The Deformation Mechanism In Shearing With Concurrent Crack Growth Over The Cut Section
AIP Conf. Proc. 1353, 609–614 (2011)
https://doi.org/10.1063/1.3589582
Thermal Fatigue Testing of Duplex‐Coated Hot Work Tool Steels at Elevated Temperatures
AIP Conf. Proc. 1353, 1027–1032 (2011)
https://doi.org/10.1063/1.3589651
Application of Homogeneous Potentials for the Modeling of the Bauschinger Effects in Ultra Low Carbon Steel
AIP Conf. Proc. 1353, 1453–1457 (2011)
https://doi.org/10.1063/1.3589721
Determination of Stress‐Strain Curves of Sheet Metals by Hydraulic Bulge Test
AIP Conf. Proc. 1353, 1429–1434 (2011)
https://doi.org/10.1063/1.3589717
Investigation on Replication of Microstructures on Flexible Substrates by Roll Embossing Process
AIP Conf. Proc. 1353, 398–403 (2011)
https://doi.org/10.1063/1.3589548
Manufacturing of a Complex Preform by RTM. Processes Parameters and Quality of the Part
AIP Conf. Proc. 1353, 936–941 (2011)
https://doi.org/10.1063/1.3589636
Comparing the weld zone representation methods during the formability prediction of friction stir welded blanks
AIP Conf. Proc. 1353, 213–218 (2011)
https://doi.org/10.1063/1.3589517
High Temperature Oxidation Behavior of HVOF‐sprayed Coatings for Use in Thixoextrusion Processes
AIP Conf. Proc. 1353, 1057–1062 (2011)
https://doi.org/10.1063/1.3589656
Towards the Prediction of Damage Of Peritectic Steels During Continuous Casting Process
AIP Conf. Proc. 1353, 151–156 (2011)
https://doi.org/10.1063/1.3589507
Numerical modeling of axi‐symmetrical cold forging process by “Pseudo Inverse Approach”
AIP Conf. Proc. 1353, 362–367 (2011)
https://doi.org/10.1063/1.3589542
Advances in Simulation of Two Point Incremental Forming
AIP Conf. Proc. 1353, 183–188 (2011)
https://doi.org/10.1063/1.3589512
An ALE Based FE Formulation for the 3D Numerical Simulation of Fineblanking Processes
AIP Conf. Proc. 1353, 1209–1214 (2011)
https://doi.org/10.1063/1.3589681
Finite element modelling of process‐integrated powder coating by radial axial rolling of rings
AIP Conf. Proc. 1353, 339–344 (2011)
https://doi.org/10.1063/1.3589538
FE simulation of a steel thin‐wall short‐tube forming process
AIP Conf. Proc. 1353, 258–263 (2011)
https://doi.org/10.1063/1.3589525
Nonlinear Deformation Behavior of New Braided Composites with Six‐axis Yarn Orientations
AIP Conf. Proc. 1353, 1008–1012 (2011)
https://doi.org/10.1063/1.3589648
Roller Pressure Quench Process of Steel Plate Modelling
AIP Conf. Proc. 1353, 115–120 (2011)
https://doi.org/10.1063/1.3589501
Research on how to improve the accuracy of the SLM metallic parts
AIP Conf. Proc. 1353, 1385–1390 (2011)
https://doi.org/10.1063/1.3589710
A Voronoi‐Based Nodal Integrated FEM Simulation of Extrusion Process
AIP Conf. Proc. 1353, 1157–1162 (2011)
https://doi.org/10.1063/1.3589672
The Natural Neighbour Radial Point Interpolation Meshless Method Applied to the Non‐Linear Analysis
AIP Conf. Proc. 1353, 1175–1178 (2011)
https://doi.org/10.1063/1.3589675
Multiscale Modeling of the Orthotropic Behaviour of PA6‐6 overmoulded Composites using MMI™ Approach
AIP Conf. Proc. 1353, 726–731 (2011)
https://doi.org/10.1063/1.3589601
Experimental Evaluation of Springback in Aluminium Alloys Using Optical Measurement and Numerical Analysis
AIP Conf. Proc. 1353, 241–246 (2011)
https://doi.org/10.1063/1.3589522
In‐Situ Measurements of Fabric Thickness Evolution During Draping
AIP Conf. Proc. 1353, 924–929 (2011)
https://doi.org/10.1063/1.3589634
In‐Plane Shear Characterisation of Uni‐Directionally Reinforced Thermoplastic Melts
AIP Conf. Proc. 1353, 930–935 (2011)
https://doi.org/10.1063/1.3589635
Infrared curing simulations of liquid composites molding
AIP Conf. Proc. 1353, 1125–1130 (2011)
https://doi.org/10.1063/1.3589667
On The Use Of Prototype Industrial Flows To Identify Viscoelastic Constitutive Equations For Polymer Melts
AIP Conf. Proc. 1353, 677–682 (2011)
https://doi.org/10.1063/1.3589593