Skip Nav Destination
Issues
Process Modeling In Cold Forging Considering The Process‐Tool‐Machine Interactions
AIP Conf. Proc. 1252, 312–319 (2010)
https://doi.org/10.1063/1.3457568
Front Matter for Volume 1252
AIP Conf. Proc. 1252, frontmatter (2010)
https://doi.org/10.1063/v1252.frontmatter
Back Matter for Volume 1252
AIP Conf. Proc. 1252, backmatter (2010)
https://doi.org/10.1063/v1252.backmatter
The Design and Performance Evaluation of Hydroformed Tubular Torsion Beam Axle
AIP Conf. Proc. 1252, 397–402 (2010)
https://doi.org/10.1063/1.3457580
A study of the development of a new type of bulb bracket for offshore structures using suitable casting steel
AIP Conf. Proc. 1252, 496–503 (2010)
https://doi.org/10.1063/1.3457595
Sheet Forming Simulations of Automotive Parts using Different Yield Functions
AIP Conf. Proc. 1252, 361–368 (2010)
https://doi.org/10.1063/1.3457575
Effect of Isothermal Reheating at Different Holding Times on The Microstructure of In‐situ Cast Composite
AIP Conf. Proc. 1252, 669–672 (2010)
https://doi.org/10.1063/1.3457619
Thermo‐mechanical Forming of Al‐Mg‐Si Alloys: Modeling and Experiments
AIP Conf. Proc. 1252, 810–817 (2010)
https://doi.org/10.1063/1.3457638
Process Design by FEM Simulation for Shape Ring Rolling of Large‐Sized Ring
AIP Conf. Proc. 1252, 964–971 (2010)
https://doi.org/10.1063/1.3457661
Discrete Element Method, a Tool to Investigate Complex Material Behaviour in Material Forming
AIP Conf. Proc. 1252, 778–786 (2010)
https://doi.org/10.1063/1.3457634
Fully‐Integrated Numerical Analysis of Micro‐Injection Molding with Localized Induction Heating
AIP Conf. Proc. 1252, 192–197 (2010)
https://doi.org/10.1063/1.3457551
Manufacture of Mould with a High Energy Efficiency Using Rapid Manufacturing Process
AIP Conf. Proc. 1252, 185–191 (2010)
https://doi.org/10.1063/1.3457549
Numerical Modeling of Hot Press Forming Process of Boron Steel Tube
AIP Conf. Proc. 1252, 1216–1222 (2010)
https://doi.org/10.1063/1.3457521
Modeling, Testing and Numerical Simulation on Hot Forming of HSS
AIP Conf. Proc. 1252, 18–26 (2010)
https://doi.org/10.1063/1.3457550
Classical and Thermodynamically Consistent Non‐local Formulations for Ductile Damage: Comparison of Approaches
AIP Conf. Proc. 1252, 125–132 (2010)
https://doi.org/10.1063/1.3457527
Predicting Ductility and Failure Modes of TRIP Steels under Different Loading Conditions
AIP Conf. Proc. 1252, 1265–1270 (2010)
https://doi.org/10.1063/1.3457528
Implementation of an Evolving non Quadratic Anisotropic Behaviour for the Closed Packed Materials
AIP Conf. Proc. 1252, 228–234 (2010)
https://doi.org/10.1063/1.3457556
An Optimization Study of Hot Stamping Operation
AIP Conf. Proc. 1252, 537–544 (2010)
https://doi.org/10.1063/1.3457599
Cup‐Drawing Behavior of High‐Strength Steel Sheets Containing Different Volume Fractions of Martensite
AIP Conf. Proc. 1252, 168–172 (2010)
https://doi.org/10.1063/1.3457546
A Coupled Multiscale Model of Texture Evolution and Plastic Anisotropy
AIP Conf. Proc. 1252, 770–777 (2010)
https://doi.org/10.1063/1.3457633
Genetic algorithm for design and manufacture optimization based on numerical simulations applied to aeronautic composite parts
AIP Conf. Proc. 1252, 1150–1159 (2010)
https://doi.org/10.1063/1.3457512
A Methodology to Determine the Friction Coefficient in Flexforming (Fluidcell Forming) Process
AIP Conf. Proc. 1252, 278–282 (2010)
https://doi.org/10.1063/1.3457562
Inverse Analysis in Hydroforming of a Refrigerator Door Handle Using MOGA
AIP Conf. Proc. 1252, 1239–1246 (2010)
https://doi.org/10.1063/1.3457524
Finite Element Investigation of Hole‐Expansion Formability of Dual‐Phase Steels Using RVE Approach
AIP Conf. Proc. 1252, 149–152 (2010)
https://doi.org/10.1063/1.3457542
Research on Fracture of Aluminum Foil in Microscale Laser Peen Forming
AIP Conf. Proc. 1252, 1279–1285 (2010)
https://doi.org/10.1063/1.3457530
A Computational Model for the Numerical Simulation of FSW Processes
AIP Conf. Proc. 1252, 81–88 (2010)
https://doi.org/10.1063/1.3457640
Effects of Boron on Microstructure and Tensile Properties of Metal Matrix Composite
AIP Conf. Proc. 1252, 1073–1083 (2010)
https://doi.org/10.1063/1.3457502
The Effect of Li Additions on Wear Properties of Cast In‐situ Composites
AIP Conf. Proc. 1252, 1018–1024 (2010)
https://doi.org/10.1063/1.3457494
Transverse Crack Modeling of Continuously Casted Slabs through Finite Element Method in Roughing Rolling at Wide Strip Mill
AIP Conf. Proc. 1252, 1309–1315 (2010)
https://doi.org/10.1063/1.3457534
A Crystalline Plasticity Finite Element Method for Simulation of the Plastic Deformation of AZ31 Magnesium Alloys
AIP Conf. Proc. 1252, 826–832 (2010)
https://doi.org/10.1063/1.3457641
Calculation of Recrystallization Textures Using Slip Systems Activated during Deformation of Metals
AIP Conf. Proc. 1252, 116–124 (2010)
https://doi.org/10.1063/1.3457515
Finite Element Analysis and Die Design of Non‐specific Engineering Structure of Aluminum Alloy during Extrusion
AIP Conf. Proc. 1252, 1055–1059 (2010)
https://doi.org/10.1063/1.3457500
Sheet Hydroforming Process Numerical Model Improvement Through Experimental Results Analysis
AIP Conf. Proc. 1252, 328–330 (2010)
https://doi.org/10.1063/1.3457570
Modeling of Directional Hardening Based on Non‐Associated Flow for Sheet Forming
AIP Conf. Proc. 1252, 161–167 (2010)
https://doi.org/10.1063/1.3457545
On Springback Prediction With Special Reference To Constitutive Modeling
AIP Conf. Proc. 1252, 1003–1011 (2010)
https://doi.org/10.1063/1.3457492
A Method of Springback Prediction and Tool Shape Compensation for Multi‐curvature Sheet Metal Bending
AIP Conf. Proc. 1252, 868–874 (2010)
https://doi.org/10.1063/1.3457647
Numerical and Experimental Analysis of the Dynamic Behavior of Aluminum‐Composition Cork Sandwich Beams
AIP Conf. Proc. 1252, 237–244 (2010)
https://doi.org/10.1063/1.3457557
Wear Behavior of Cast In‐situ Composite: Effect of Different Volume Fractions
AIP Conf. Proc. 1252, 1012–1017 (2010)
https://doi.org/10.1063/1.3457493
Accuracy Analysis of Anisotropic Yield Functions based on the Root‐Mean Square Error
AIP Conf. Proc. 1252, 739–746 (2010)
https://doi.org/10.1063/1.3457629
Crystal Plasticity Finite Element Analysis of Loading‐Unloading Behaviour in Magnesium Alloy Sheet
AIP Conf. Proc. 1252, 802–809 (2010)
https://doi.org/10.1063/1.3457637
Forming Apparatus to Investigate the Effect of Temperature on the Superplastic Behaviour of Alloys
AIP Conf. Proc. 1252, 304–311 (2010)
https://doi.org/10.1063/1.3457567
Temperature Dependent Constitutive Modeling for Magnesium Alloy Sheet
AIP Conf. Proc. 1252, 1031–1038 (2010)
https://doi.org/10.1063/1.3457496
Self‐Pierce Riveting of Three Aluminium Alloy and Mild Steel Sheets
AIP Conf. Proc. 1252, 673–680 (2010)
https://doi.org/10.1063/1.3457620
Effects of Al—5Ti—1B master alloy on the microstructural evaluation of a highly alloyed aluminum alloy produced by SIMA process
AIP Conf. Proc. 1252, 1060–1072 (2010)
https://doi.org/10.1063/1.3457501
Prediction of Microstructure in High‐Strength Ductile Forging Parts
AIP Conf. Proc. 1252, 1039–1046 (2010)
https://doi.org/10.1063/1.3457497
Process of Equiaxed Grains of RE‐Al Alloy under Slope Vibration
AIP Conf. Proc. 1252, 559–564 (2010)
https://doi.org/10.1063/1.3457602
Micropatterning of a Bipolar Plate Using Direct Laser Melting Process
AIP Conf. Proc. 1252, 1233–1238 (2010)
https://doi.org/10.1063/1.3457523
Strength and Efficiency during Lap Joining molding of GMT‐Sheet
AIP Conf. Proc. 1252, 705–713 (2010)
https://doi.org/10.1063/1.3457624
Orthogonal Metal Cutting Simulation Using Advanced Constitutive Equations with Damage and Fully Adaptive Numerical Procedure
AIP Conf. Proc. 1252, 1093–1100 (2010)
https://doi.org/10.1063/1.3457505
Investigation of Ti6Al4V Orthogonal Cutting Numerical Simulations using Different Material Models
AIP Conf. Proc. 1252, 787–794 (2010)
https://doi.org/10.1063/1.3457635
The effect of skin passing on the material behavior of metal strip in pure bending and tension
AIP Conf. Proc. 1252, 896–902 (2010)
https://doi.org/10.1063/1.3457651
Analysis of a Micro Pattern Forming on the Thin Sheet Metal for Electronic Device
AIP Conf. Proc. 1252, 198–205 (2010)
https://doi.org/10.1063/1.3457552
Numerical Design of Drawbeads for Advanced High Strength Steel Sheets
AIP Conf. Proc. 1252, 348–356 (2010)
https://doi.org/10.1063/1.3457573
FORMABILITY, FLOW AND HEAT TRANSFER SIMULATION OF HOT PRESS FORMING B‐PILLAR PART AND TOOLS
AIP Conf. Proc. 1252, 344–347 (2010)
https://doi.org/10.1063/1.3457572
Straight Tube Hydroforming of Dual Phase (DP780) Steel Tubes With End‐Feed
AIP Conf. Proc. 1252, 995–1002 (2010)
https://doi.org/10.1063/1.3457666
Optimum Blank Design of Thick‐Plate Metal Forming without Blank Holder
AIP Conf. Proc. 1252, 1134–1141 (2010)
https://doi.org/10.1063/1.3457510
Integration of Numerical Methods and Analytic Approaches for Effective Solution of Metal Forming Problems
AIP Conf. Proc. 1252, 39–54 (2010)
https://doi.org/10.1063/1.3457581
Prediction of Forming Limits Based on a Coupled Approach Between Anisotropic Damage and Necking Models
AIP Conf. Proc. 1252, 253–259 (2010)
https://doi.org/10.1063/1.3457559
The Influence of Geometrical Parameters on the Incremental Forming Process for Knee Implants Analyzed by Numerical Simulation
AIP Conf. Proc. 1252, 1208–1215 (2010)
https://doi.org/10.1063/1.3457520
An Analytical Comparison of Single and Bi‐layered Tube Hydroforming Systems Using Finite Element Method
AIP Conf. Proc. 1252, 1047–1054 (2010)
https://doi.org/10.1063/1.3457499
Material Models for Accurate Simulation of Sheet Metal Forming and Springback
AIP Conf. Proc. 1252, 71–78 (2010)
https://doi.org/10.1063/1.3457626
A 3D Contact Smoothing Method based on Quasi‐ Interpolation and Normal voting —Application to 3D Forging and Rolling
AIP Conf. Proc. 1252, 487–495 (2010)
https://doi.org/10.1063/1.3457594
Sheet Hydroforming Pre‐bulging Numerical Model Improvement
AIP Conf. Proc. 1252, 336–343 (2010)
https://doi.org/10.1063/1.3457571
A Study on Fracture Locus of St12 Steel And Implementation Ductile Damage Criteria
AIP Conf. Proc. 1252, 1303–1308 (2010)
https://doi.org/10.1063/1.3457533
An efficient triangular shell element based on edge‐based smoothing technique for sheet metal forming simulation
AIP Conf. Proc. 1252, 1118–1125 (2010)
https://doi.org/10.1063/1.3457508
Process Simulation of Aluminium Sheet Metal Deep Drawing at Elevated Temperatures
AIP Conf. Proc. 1252, 927–934 (2010)
https://doi.org/10.1063/1.3457656
Experimental Analysis and Numerical Simulation of the Flow Behaviour of Thin Polymer Films during Hot Embossing
AIP Conf. Proc. 1252, 651–658 (2010)
https://doi.org/10.1063/1.3457617
Failure Prediction in Fine Blanking Process with Stress Limit Model
AIP Conf. Proc. 1252, 473–478 (2010)
https://doi.org/10.1063/1.3457592
Simulation and Knowledge Based Process Planning Through the Use of Metamodels
AIP Conf. Proc. 1252, 888–895 (2010)
https://doi.org/10.1063/1.3457650
The Nucleation and Growth of Micro‐Defects in Hot Compression Process
AIP Conf. Proc. 1252, 1326–1332 (2010)
https://doi.org/10.1063/1.3457537
Effect of Imposing Temperature Gradient in Stretch Forming Process for Ferritic Stainless Steel Sheets
AIP Conf. Proc. 1252, 1193–1200 (2010)
https://doi.org/10.1063/1.3457518
3D FEM Simulation of Rolling Load Working on Piercer Plug in Mannesmann Piercing Process
AIP Conf. Proc. 1252, 1333–1338 (2010)
https://doi.org/10.1063/1.3457538
FINITE ELEMENT ANALYSIS OF LAYER‐INTEGRATED STEEL SHEETS UNDERGOING BENDING
AIP Conf. Proc. 1252, 283–289 (2010)
https://doi.org/10.1063/1.3457564
Numerical Optimization of the Method of Cooling of a Massive Casting of Ductile Cast‐Iron
AIP Conf. Proc. 1252, 578–585 (2010)
https://doi.org/10.1063/1.3457606
Proposal and Use of a Void Model for the Simulation of Ductile Fracture Behavior in Material Forming
AIP Conf. Proc. 1252, 97–102 (2010)
https://doi.org/10.1063/1.3457663
Metal forming process effect evaluation on structural behavior of an aeronautic panel
AIP Conf. Proc. 1252, 320–327 (2010)
https://doi.org/10.1063/1.3457569
A homogenization approach to the yield strength of spherical powder compacts
AIP Conf. Proc. 1252, 681–688 (2010)
https://doi.org/10.1063/1.3457621
Analysis on the Cause of Twisting Defects Occurred in Sheet Panel Formed Through Local Embossing and Edge Bending
AIP Conf. Proc. 1252, 882–887 (2010)
https://doi.org/10.1063/1.3457649
Effect of the Yield Stress and r‐value Distribution on the Earing Profile of Cup Drawing with Yld2000‐2d Yield Function
AIP Conf. Proc. 1252, 375–382 (2010)
https://doi.org/10.1063/1.3457577
Local Bifurcation and Instability Theory Applied to Formability Analysis
AIP Conf. Proc. 1252, 409–416 (2010)
https://doi.org/10.1063/1.3457584
Elasto‐Plasticity Behavior of Type 5000 and 6000 Aluminum Alloy Sheets and Its Constitutive Modeling
AIP Conf. Proc. 1252, 630–637 (2010)
https://doi.org/10.1063/1.3457613
An Elastoplastic Finite Element Modeling Coupled with Orientation Image based Micromechanical Approach
AIP Conf. Proc. 1252, 103–106 (2010)
https://doi.org/10.1063/1.3457498
Effect of Viscosity on the Microformability of Bulk Amorphous Alloy in Supercooled Liquid Region
AIP Conf. Proc. 1252, 553–558 (2010)
https://doi.org/10.1063/1.3457601
Study on edge crack propagation during cold rolling of thin strip by FEM
AIP Conf. Proc. 1252, 1320–1325 (2010)
https://doi.org/10.1063/1.3457536
MICRO POWDER INJECTION MOULDING OF 316L STAINLESS STEEL FEEDSTOCK AND NUMERICAL SIMULATION OF THE SINTERING STAGE
AIP Conf. Proc. 1252, 531–536 (2010)
https://doi.org/10.1063/1.3457598
A Numerical Model of the Temperature Field of the Cast and Solidified Ceramic Material
AIP Conf. Proc. 1252, 571–577 (2010)
https://doi.org/10.1063/1.3457605
DEVELOPMENT OF ALLOY AND SUPERALLOY LARGE SHAFTS BY FRICTION WELDING PROCESS
AIP Conf. Proc. 1252, 206–212 (2010)
https://doi.org/10.1063/1.3457553
Material Modeling and Springback Prediction of Ultra Thin Austenitic Stainless Steel Sheet
AIP Conf. Proc. 1252, 213–220 (2010)
https://doi.org/10.1063/1.3457554
Usage of similarity in incremental bulk forming for speed up the FE‐Simulation
AIP Conf. Proc. 1252, 425–432 (2010)
https://doi.org/10.1063/1.3457586
A Study on the Application of Submerged Arc Welding for Thin Plate of A‐Grade 3.2 Thickness Steel in Ship Structure
AIP Conf. Proc. 1252, 714–720 (2010)
https://doi.org/10.1063/1.3457625
Fast numerical simulation of sheet metal forming using the program QuickForm
AIP Conf. Proc. 1252, 433–438 (2010)
https://doi.org/10.1063/1.3457587
Simulation and Experiment on Direct Continuous Casting Process of Lead Frame Copper Alloy
AIP Conf. Proc. 1252, 515–522 (2010)
https://doi.org/10.1063/1.3457596
Simulation and analysis of hot forging process for industrial locking gear elevators
AIP Conf. Proc. 1252, 903–909 (2010)
https://doi.org/10.1063/1.3457653
An ALE Based FE Formulation for the 3D Numerical Simulation of Fineblanking Processes
AIP Conf. Proc. 1252, 1168–1175 (2010)
https://doi.org/10.1063/1.3457514
Simulation of 7050 Wrought Aluminum Alloy Wheel Die Forging and its Defects Analysis based on DEFORM
AIP Conf. Proc. 1252, 638–644 (2010)
https://doi.org/10.1063/1.3457614
OPTIMIZATION DESIGN OF THE DIE OF SYNCHRONIZATION ROLLING AXLE ON CROSS‐WEDGE ROLLING WITH MULTI‐WEDGE
AIP Conf. Proc. 1252, 1087–1092 (2010)
https://doi.org/10.1063/1.3457504
A new model for the prediction of the steepness profile across the strip in flat rolling
AIP Conf. Proc. 1252, 731–738 (2010)
https://doi.org/10.1063/1.3457628
An analytic model for the prediction of the bar temperature in a roughing mill
AIP Conf. Proc. 1252, 723–730 (2010)
https://doi.org/10.1063/1.3457627
Advanced Numerical methods for F. E. Simulation of Metal Forming Processes
AIP Conf. Proc. 1252, 27–38 (2010)
https://doi.org/10.1063/1.3457563
An Investigation on the Accuracy of Numerical Simulations for Single Point Incremental Forming with Continuum Elements
AIP Conf. Proc. 1252, 221–227 (2010)
https://doi.org/10.1063/1.3457555
The Finite Element Method in Industrial Forming Processes. A Brief Historical Perspective
AIP Conf. Proc. 1252, 15–17 (2010)
https://doi.org/10.1063/1.3457544
MPS‐based LS‐SVR Metamodeling Technique for Sheet Forming Optimization
AIP Conf. Proc. 1252, 1109–1117 (2010)
https://doi.org/10.1063/1.3457507
Effect of Dummy Block Shape on Deformation of Oxide Film of Billet in Copper Extrusion
AIP Conf. Proc. 1252, 383–388 (2010)
https://doi.org/10.1063/1.3457578
Atomistic Numerical Simulation on Nanoupsetting Process of Copper Brick
AIP Conf. Proc. 1252, 624–629 (2010)
https://doi.org/10.1063/1.3457612
Investigation on Sintering Mechanism of Nanoscale Tungsten Powder Based on Atomistic Simulation
AIP Conf. Proc. 1252, 1176–1183 (2010)
https://doi.org/10.1063/1.3457516
3‐D and Anisotropic Effects on the Prediction of Burst in Aluminum Tube Hydroforming
AIP Conf. Proc. 1252, 141–148 (2010)
https://doi.org/10.1063/1.3457541
Prediction of Gas Leak Tightness of Superplastically Formed Products
AIP Conf. Proc. 1252, 818–825 (2010)
https://doi.org/10.1063/1.3457639
Effect of Asymmetric Rolling on Plastic Anisotropy of Low Carbon Steels during Simple Shear Tests
AIP Conf. Proc. 1252, 181–184 (2010)
https://doi.org/10.1063/1.3457548
Statistical Analysis of Magnetic Abrasive Finishing (MAF) On Surface Roughness
AIP Conf. Proc. 1252, 1160–1167 (2010)
https://doi.org/10.1063/1.3457513
Prediction of Residual Stresses and Distortion in Quenched Extruded Shapes Using Generalized Plane Strain Theory
AIP Conf. Proc. 1252, 173–180 (2010)
https://doi.org/10.1063/1.3457547
A Study on Temperature Distribution and Curved Structure for Thick Plate by Single‐Pass Induction Heating
AIP Conf. Proc. 1252, 659–665 (2010)
https://doi.org/10.1063/1.3457618
Evaluation of Die Chilling Effects during Forging of Nimonic‐80A Superalloy
AIP Conf. Proc. 1252, 875–881 (2010)
https://doi.org/10.1063/1.3457648
Simulations of Forming Limit Diagrams for the Aluminum Sheet Alloy 5754CC
AIP Conf. Proc. 1252, 972–980 (2010)
https://doi.org/10.1063/1.3457662
Analysis of Multi‐step Forming of Metallic Bipolar Plate for MCFC Using Various Shapes of Preforms
AIP Conf. Proc. 1252, 296–303 (2010)
https://doi.org/10.1063/1.3457566
NUMERICAL MODELLING OF THERMAL‐ELECTRICAL PHENOMENA IN SPARK PLASMA SINTERING
AIP Conf. Proc. 1252, 697–704 (2010)
https://doi.org/10.1063/1.3457623
On the Determination of Flow Stress Using Bulge Test and Mechanical Measurement
AIP Conf. Proc. 1252, 845–852 (2010)
https://doi.org/10.1063/1.3457644
Mono and multi‐objective optimization techniques applied to a large range of industrial test cases using Metamodel assisted Evolutionary Algorithms
Lionel Fourment; Richard Ducloux; Stéphane Marie; Mohsen Ejday; Dominique Monnereau; Thomas Massé; Pierre Montmitonnet
AIP Conf. Proc. 1252, 833–840 (2010)
https://doi.org/10.1063/1.3457642
A Study On Critical Thinning In Thin‐walled Tube Bending Of Al‐Alloy 5052O Via Coupled Ductile Fracture Criteria
AIP Conf. Proc. 1252, 1286–1294 (2010)
https://doi.org/10.1063/1.3457531
Modelling the Thermo‐Mechanical Behavior of Magnesium Alloys during Indirect Extrusion
AIP Conf. Proc. 1252, 447–454 (2010)
https://doi.org/10.1063/1.3457589
Influence of Surface Effect On Nickel Micro Deep Drawing Process
AIP Conf. Proc. 1252, 1025–1030 (2010)
https://doi.org/10.1063/1.3457495
Anisotropic constitutive model and FE simulation of the sintering process of slip cast traditional porcelain
AIP Conf. Proc. 1252, 689–696 (2010)
https://doi.org/10.1063/1.3457622
Application of a dislocation based model for Interstitial Free (IF) steels to typical stamping simulations
AIP Conf. Proc. 1252, 1339–1346 (2010)
https://doi.org/10.1063/1.3457539
Phenomenological microstructure simulation of incremental bulk metal forming using a multi mesh method
AIP Conf. Proc. 1252, 1142–1149 (2010)
https://doi.org/10.1063/1.3457511
A Streamline‐Upwind Model for Filling Front Advection in Powder Injection Moulding
AIP Conf. Proc. 1252, 545–552 (2010)
https://doi.org/10.1063/1.3457600
Explicit Simulation of Roll Forming Process with EAS Solid‐shell Elements
AIP Conf. Proc. 1252, 1223–1230 (2010)
https://doi.org/10.1063/1.3457522
An Investigation into the Optimization of Loading Path in T‐shape of Tube Hydroforming
AIP Conf. Proc. 1252, 1101–1108 (2010)
https://doi.org/10.1063/1.3457506
Investigations on the Predictability of Coining Stainless Steel AISI 410
AIP Conf. Proc. 1252, 956–963 (2010)
https://doi.org/10.1063/1.3457660
FE Simulation of Cross Roll Straightening: a Strain Tensor Field Approach
AIP Conf. Proc. 1252, 941–948 (2010)
https://doi.org/10.1063/1.3457658
Prediction of Shear‐induced Crack Initiation in AHSS Deep Drawing Operation with a Phenomenological Fracture Model
AIP Conf. Proc. 1252, 464–472 (2010)
https://doi.org/10.1063/1.3457591
Numerical Simulation of Time‐dependent Spring‐back Behavior for Aluminum Alloy 6022‐T4 Sheet
AIP Conf. Proc. 1252, 153–160 (2010)
https://doi.org/10.1063/1.3457543
An FE Based On‐line Model for the Prediction of Work Roll Thermal Profile in Hot Strip Rolling
AIP Conf. Proc. 1252, 1126–1133 (2010)
https://doi.org/10.1063/1.3457509
Software Analytical Instrument for Assessment of the Process of Casting Slabs
AIP Conf. Proc. 1252, 586–592 (2010)
https://doi.org/10.1063/1.3457607
Mechanical properties and microstructure of AA1050 after ECAE (Equal Channel Angular Extrusion)
AIP Conf. Proc. 1252, 981–986 (2010)
https://doi.org/10.1063/1.3457664
Anisotropic Properties of Stainless Steel—Clad Aluminum Sheet
AIP Conf. Proc. 1252, 357–360 (2010)
https://doi.org/10.1063/1.3457574
Olgierd (Olek) Cecil Zienkiewicz (1921–2009): A Biographical Tribute
AIP Conf. Proc. 1252, 3–14 (2010)
https://doi.org/10.1063/1.3457582
Rheological Models of Blood: Sensitivity Analysis and Benchmark Simulations
AIP Conf. Proc. 1252, 1184–1192 (2010)
https://doi.org/10.1063/1.3457517
Polymer Modelling in Wall Ironing Simulations of a PET‐Steel Laminate
AIP Conf. Proc. 1252, 762–769 (2010)
https://doi.org/10.1063/1.3457632
Analysis of Material Flow in Screw Extrusion of Aluminum
AIP Conf. Proc. 1252, 860–867 (2010)
https://doi.org/10.1063/1.3457646
Automated Bead Design Considering Production Constraints
AIP Conf. Proc. 1252, 1247–1255 (2010)
https://doi.org/10.1063/1.3457525
Numerical Analysis of AHSS Fracture in a Stretch‐bending Test
AIP Conf. Proc. 1252, 455–463 (2010)
https://doi.org/10.1063/1.3457590
Numerical Simulations on Warm Forming of Stainless Steel with TRIP‐Effect
AIP Conf. Proc. 1252, 595–601 (2010)
https://doi.org/10.1063/1.3457608