Skip Nav Destination
Issues
Harmonic Responses in 2DEG AlGaAs/GaAs HEMT Devices Due to Plasma Wave Interaction
AIP Conf. Proc. 1217, 19–25 (2010)
https://doi.org/10.1063/1.3377812
Highly Enhanced Green Photoluminescence of as‐Anodized n‐type Porous GaAs
AIP Conf. Proc. 1217, 348–352 (2010)
https://doi.org/10.1063/1.3377842
The Effect of Catalyst Composition on the Characteristic of Bulk Single‐Walled Carbon Nanotubes (SWNTs)
AIP Conf. Proc. 1217, 256–261 (2010)
https://doi.org/10.1063/1.3377825
Microstructure Characterization of Mechanically Activated Talc in Jet Mill Using XRD Line Broadening Technique
AIP Conf. Proc. 1217, 437–441 (2010)
https://doi.org/10.1063/1.3377862
Thermal and Electrical Characterization of Alumina Substrate for Microelectronic Applications
AIP Conf. Proc. 1217, 442–446 (2010)
https://doi.org/10.1063/1.3377863
Electrical Properties and Surface Morphology Study of Titanium Dioxide Thin Films Prepared by Sol Gel Method
AIP Conf. Proc. 1217, 266–271 (2010)
https://doi.org/10.1063/1.3377827
Effect Of Particle Dispersion On Thermal Conductivity Of Copper Powder Filled Epoxy Composites
AIP Conf. Proc. 1217, 363–369 (2010)
https://doi.org/10.1063/1.3377845
Numerical Simulation Characterization of 50nm MOSFET Incorporating Dielectric Pocket (DP‐MOSFET)
AIP Conf. Proc. 1217, 554–558 (2010)
https://doi.org/10.1063/1.3377887
Numerical Simulation Analysis of CMOS Compatible Process of 50 nm Vertical Single and Double Gate NMOSFET
AIP Conf. Proc. 1217, 212–216 (2010)
https://doi.org/10.1063/1.3377817
Improvements in DC Current‐Ioltage (I‐V) Characteristics of n‐GaN Schottky Diode using Metal Overlap Edge Termination
AIP Conf. Proc. 1217, 489–494 (2010)
https://doi.org/10.1063/1.3377874
Destructive and Non‐Destructive Analysis Techniques for Failure Detection of QFN Packages
AIP Conf. Proc. 1217, 26–32 (2010)
https://doi.org/10.1063/1.3377828
Growth of Aligned Multiwalled Carbon Nanotubes (MWNTs) for Application as Field Emitters
AIP Conf. Proc. 1217, 353–357 (2010)
https://doi.org/10.1063/1.3377843
Properties of Amorphous Carbon Thin Films for Solar Cell Applications
AIP Conf. Proc. 1217, 140–146 (2010)
https://doi.org/10.1063/1.3377800
Hydrogen Adsorption on Activated Carbon an Carbon Nanotubes Using Volumetric Differential Pressure Technique
AIP Conf. Proc. 1217, 484–488 (2010)
https://doi.org/10.1063/1.3377873
Surface Morphology of Zinc Oxide Thin Films deposited by TCVD
AIP Conf. Proc. 1217, 176–181 (2010)
https://doi.org/10.1063/1.3377807
Effect of Decreasing of Cobalt Content in Properties for Diamond/Cemented Carbide Tools
AIP Conf. Proc. 1217, 1–5 (2010)
https://doi.org/10.1063/1.3377813
The Formation of Nanocrystalline Diamond Coating on WC Deposited by Microwave Assisted Plasma CVD
AIP Conf. Proc. 1217, 500–504 (2010)
https://doi.org/10.1063/1.3377876
Effect of Microwave Treatment on Density of Gigantochloa Scortechinii (Semantan) Bamboo Strips
AIP Conf. Proc. 1217, 229–233 (2010)
https://doi.org/10.1063/1.3377820
The Effect of the Oxidation Time on the Optical and Structural Properties of ZnO Thin Film
AIP Conf. Proc. 1217, 341–347 (2010)
https://doi.org/10.1063/1.3377841
Corrosion Behaviour of Al Alloys in Sea Water
AIP Conf. Proc. 1217, 72–76 (2010)
https://doi.org/10.1063/1.3377892
Plasma Sprayed Hydroxyapatite Coatings: Influence of Spraying Power on Microstructure
AIP Conf. Proc. 1217, 539–545 (2010)
https://doi.org/10.1063/1.3377885
Analysis on Strength Behaviour of Malaysian Bamboo Species
AIP Conf. Proc. 1217, 462–466 (2010)
https://doi.org/10.1063/1.3377867
A Study on the Structural Change of Al—N Co‐Doped ZnO Thin Films
AIP Conf. Proc. 1217, 166–170 (2010)
https://doi.org/10.1063/1.3377805
Synthesis and Characterization of Lithium Ferrite Powder by Sol Gel Method
AIP Conf. Proc. 1217, 370–374 (2010)
https://doi.org/10.1063/1.3377846
Grain Refinement of a γ‐TiAl Alloy Through Isothermal Forging and Heat Treatment
AIP Conf. Proc. 1217, 495–499 (2010)
https://doi.org/10.1063/1.3377875
Morphological and Thermal Studies of Plasticized Poly (methyl methacrylate) Polymer Electrolyte Systems
AIP Conf. Proc. 1217, 525–529 (2010)
https://doi.org/10.1063/1.3377881
Formation of Nitrogen‐Pearlite in the Diffusion Bonding of Sialon to 316L Stainless Steel
AIP Conf. Proc. 1217, 129–133 (2010)
https://doi.org/10.1063/1.3377798
Powder Based on Nano‐crystalline NiTi Produced Using High Energy Ball Milling and Subsequent Heat Treatment
AIP Conf. Proc. 1217, 452–456 (2010)
https://doi.org/10.1063/1.3377865
Coupling Coefficient and Refractive Index Estimation for Coupled Waveguide Fiber
AIP Conf. Proc. 1217, 424–428 (2010)
https://doi.org/10.1063/1.3377858
Kinetics of Moisture Absorption for Alkali Extracted Steam‐Exploded Fiber Filled High‐Density Polyethylene Composites
AIP Conf. Proc. 1217, 375–379 (2010)
https://doi.org/10.1063/1.3377847
Evaluation of Degradation Properties of Polyglycolide and Its Potential as Delivery Vehicle for Anticancer Agents
AIP Conf. Proc. 1217, 222–228 (2010)
https://doi.org/10.1063/1.3377819
Comparative Study of Substituted via Sol‐Gel Route
AIP Conf. Proc. 1217, 33–36 (2010)
https://doi.org/10.1063/1.3377840
Characterization of Inverse Spinel Cathode Materials Prepared by the Sol‐gel Method
AIP Conf. Proc. 1217, 262–265 (2010)
https://doi.org/10.1063/1.3377826
Optimization of Gate, Runner and Sprue in Two‐Plate Family Plastic Injection Mould
AIP Conf. Proc. 1217, 309–313 (2010)
https://doi.org/10.1063/1.3377834
Investigation and Preparation of High Impact Polystyrene Nanocomposites
AIP Conf. Proc. 1217, 239–245 (2010)
https://doi.org/10.1063/1.3377822
Protective Agent‐Free Synthesis of Colloidal Cobalt Nanoparticles
AIP Conf. Proc. 1217, 113–117 (2010)
https://doi.org/10.1063/1.3377794
UV written waveguide devices—Bragg gratings and Applications in Sensors
P. G. R. Smith; C. B. E. Gawith; J. C. G. Gates; D. M. Kundys; F. R. Mahamd Adikan; C. E. Holmes; H. E. Major; M. Garcia‐Ramirez; B. D. Snow; M. F. Kaczmarek; A. Dyudusha
AIP Conf. Proc. 1217, 153–158 (2010)
https://doi.org/10.1063/1.3377803
Effect of Sintering Temperature on the Photothermal Spectrum of ———ZnO Ceramics
AIP Conf. Proc. 1217, 530–534 (2010)
https://doi.org/10.1063/1.3377883
ZnO Thin Film Ga s Sensor for CO
AIP Conf. Proc. 1217, 520–524 (2010)
https://doi.org/10.1063/1.3377880
The Growth and Growth Mechanism of Congruent Single Crystals by Czochralski Method
AIP Conf. Proc. 1217, 182–186 (2010)
https://doi.org/10.1063/1.3377808
Electrochemical Characteristics of Tin Oxide‐Graphite as Anode Material for Lithium‐ion Cells
AIP Conf. Proc. 1217, 187–189 (2010)
https://doi.org/10.1063/1.3377809
Magnetic Phase Development of Iron Oxide‐ Aerogel and Xerogel Prepared using Rice Husk Ash as Precursor
AIP Conf. Proc. 1217, 294–301 (2010)
https://doi.org/10.1063/1.3377832
In vitro Study on Apical Sealing Ability of Nano‐Hydroxyapatite‐Filled Epoxy Resin Based Endodontic Sealer
AIP Conf. Proc. 1217, 467–471 (2010)
https://doi.org/10.1063/1.3377868
The Effects of Lithium Triflate on the PMMA‐based Solid Polymer Electrolytes
AIP Conf. Proc. 1217, 246–250 (2010)
https://doi.org/10.1063/1.3377823
Studies on the Properties of Plasticizer and Lithium Salt on PMMA‐based Solid Polymer Electrolytes
AIP Conf. Proc. 1217, 124–128 (2010)
https://doi.org/10.1063/1.3377797
Optical and Structural Properties of a‐SiC:H prepared by Hot‐wire CVD Technique at Various Gas Flow
AIP Conf. Proc. 1217, 58–64 (2010)
https://doi.org/10.1063/1.3377889
Preparation and Conductivity Measurements of Thin Film Electrolyte System
AIP Conf. Proc. 1217, 429–431 (2010)
https://doi.org/10.1063/1.3377859
Influence of Process Control Agents on Mechanochemical Synthesis of Nano Composite powder
AIP Conf. Proc. 1217, 414–418 (2010)
https://doi.org/10.1063/1.3377855
Fabrication of Nano‐Composite Surface Layers on Aluminium Employing Friction Stir Processing Technique
AIP Conf. Proc. 1217, 447–451 (2010)
https://doi.org/10.1063/1.3377864
Preparation of for Lithium Batteries Via Solid‐State Redox Method using Nitrate and Acetate Based Reactants
AIP Conf. Proc. 1217, 106–112 (2010)
https://doi.org/10.1063/1.3377793
Surface Adsorption Mechanism: A Molecular Self‐Assembly Phenomenon with Application to Surface Protection
AIP Conf. Proc. 1217, 279–286 (2010)
https://doi.org/10.1063/1.3377830
Optimization of Electrical Conductivity for Composite Bipolar Plates in PEM Fuel Cell
AIP Conf. Proc. 1217, 559–565 (2010)
https://doi.org/10.1063/1.3377888
The Effect of Anionic Surfactant Quantity on the Sr‐Hexaferrite Powder Synthesized by a Sol‐Gel Auto‐Combustion Process
AIP Conf. Proc. 1217, 404–408 (2010)
https://doi.org/10.1063/1.3377853
Synthesis and Characterization of Single Walled Carbon Nanotubes (SWNTs) for Sensing Application
AIP Conf. Proc. 1217, 200–204 (2010)
https://doi.org/10.1063/1.3377815
Methanation Reactivity of Nickel Oxide Based Catalyst Prepared from Different Nickel Salt Precursors
AIP Conf. Proc. 1217, 195–199 (2010)
https://doi.org/10.1063/1.3377811
Preparation of SiC‐Based Composites by Cold Isostatic Press
AIP Conf. Proc. 1217, 323–327 (2010)
https://doi.org/10.1063/1.3377837
Nano‐Sized Natural Colorants from Rocks and Soils
AIP Conf. Proc. 1217, 515–517 (2010)
https://doi.org/10.1063/1.3377879
Mechanical Properties of Iron Alumininides Intermetallic Alloy with Molybdenum Addition
AIP Conf. Proc. 1217, 510–514 (2010)
https://doi.org/10.1063/1.3377878
Blunt Trauma Performance of Fabric Systems Utilizing Natural Rubber Coated High Strength Fabrics
AIP Conf. Proc. 1217, 328–334 (2010)
https://doi.org/10.1063/1.3377838
Investigation of Degradation Properties of Poly(lactide‐co‐glycolide) Matrix for Anticancer Agent Delivery
AIP Conf. Proc. 1217, 205–211 (2010)
https://doi.org/10.1063/1.3377816
Production of Medical Device Using MIM Technique
AIP Conf. Proc. 1217, 287–293 (2010)
https://doi.org/10.1063/1.3377831
Theoretical and Experimental Study Towards Fabrication of Nanogap Dielectric Biosensor by Reversed Spacer Lithography
AIP Conf. Proc. 1217, 505–509 (2010)
https://doi.org/10.1063/1.3377877
The Bending Strength, Internal Bonding and Thickness Swelling of a Five Layer Sandwiched Bamboo Particleboard
AIP Conf. Proc. 1217, 319–322 (2010)
https://doi.org/10.1063/1.3377836
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.