The queue for transporting sugar cane from rice fields in sugar mills is very long and requires a long time. This creates a shortage of funds and time because workers must be in the queue. The need for rapid measurement in sugar cane at the sugar factory is expected to provide a solution to the problem. In this study we introduced a measurement system using multisample that can be measured simultaneously. The measurement system consists of three glass prisms, three photodiode array sensors, a multiplexer and ADC, and a computer. The measurement system in this study was used to measure the concentration of sugar from concentrations of 0, 5%, 10%, 15%, 20%, 25% and 30%. The results showed that the measurements went well, because all the results of the measurement measurements on the monitor screen. The measurement system can manage each measurement directly using three samples at a time. In this way the measurement takes place faster.
Skip Nav Destination
Article navigation
26 October 2020
CLIMATE CHANGE AND SUSTAINABILITY ENGINEERING IN ASEAN 2019
13 November 2019
Jember, Indonesia
Research Article|
October 26 2020
Using multisample refractometer to determine the sugar content of sugarcane juice in sugar factory Besuki
Misto;
Misto
a)
1
Departement of Physics, FMIPA, University of Jember
, Indonesia
Search for other works by this author on:
Tri Mulyono;
Tri Mulyono
b)
2
Department of Chemistry, FMIPA, University of Jember
, Indonesia
Search for other works by this author on:
Bowo Eko Cahyono
Bowo Eko Cahyono
1
Departement of Physics, FMIPA, University of Jember
, Indonesia
Search for other works by this author on:
AIP Conf. Proc. 2278, 020026 (2020)
Citation
Misto, Tri Mulyono, Bowo Eko Cahyono; Using multisample refractometer to determine the sugar content of sugarcane juice in sugar factory Besuki. AIP Conf. Proc. 26 October 2020; 2278 (1): 020026. https://doi.org/10.1063/5.0014706
Download citation file:
Citing articles via
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.
Related Content
The use of remote sensing in mining prospecting in Situbondo, East Java, Indonesia
AIP Conf. Proc. (October 2020)
A programmable microfluidic platform for multisample injection, discretization, and droplet manipulation
Biomicrofluidics (February 2020)
Modelling the relationship between vehicle speed and road radius, degree of curved, and grade in Wringin Highway Bondowoso
AIP Conf. Proc. (October 2020)
Study of surface chemical changes and erosion rates for CV-1144-O silicone under electron cyclotron resonance oxygen plasma exposure
J. Vac. Sci. Technol. A (March 2001)
Solar photovoltaic generation for contributing electric power demand at educational building
AIP Conf. Proc. (January 2024)