The paper proposes the accelerated corrosion testing for the simulation of regular ecosystems subjected to the conditions of the laboratory in order to determine whether the factors that control the accelerated corrosion in the laboratory test are similar to that in the field test. So supporting this stainless steel grade 304 specimens were prepared as per ASTM standards and were kept in a corrosive environment for varying times and then their mechanical properties were tested. The accelerated corrosion was carried out as per the ASTMG48 standards [11]

Topics
Corrosion, Mechanical properties, Educational assessment, Ecology
1.
Laycock
,
N.J.
,
Krouse
,
D.P.
,
Hendy
,
S.C.
,
Williams
,
D.E.
, “
Computer simulation of pitting corrosion of stainless steels
”.
Electrochem. Soc. interface
 
23
,
2014
,
65
–
71
.
https://doi.org/10.1149/2.F05144IF
Google Scholar
Crossref
Search ADS
 
2.
Ribeiro
,
R.B.
,
Silva
,
J.
,
Hein
,
L.
,
Pereira
,
M.
,
Corodo
,
E.
,
Matias
,
N.
, “
Morphology characterization of pitting corrosion on sensitized Austenitic Stainless Steel by Digital Image Analysis
”.
ISRN Corrosion
 
2013
.
Google Scholar
 
3.
Ward
,
D.
, “
Correlation of Accelerated Corrosion Testing with Natural Exposure after 6 years in a coastal environment
”.
CORROSION NACE International
 
2008
.
Google Scholar
 
4.
Chaves
,
l.
,
Melchers
,
R.
, “
Long term localized corrosion of marine steel pilling welds
”.
Corrosion Eng. Sci. Techno
 
48
,
469
–
474
.
https://doi.org/10.1179/1743278212Y.0000000073
Crossref
Search ADS
 
5.
Caines
,
S.
,
Khan
,
F.
,
Shirokoff
,
J.
,
Qiu
,
W.
, “
Experimental design to study corrosion under insulation in harsh marine environments
”.
J. Loss Prev. Process Ind.
 
33
,
2012
,
39
–
51
.
https://doi.org/10.1016/j.jlp.2014.10.014
Google Scholar
Crossref
Search ADS
 
6.
Woldemedhin
,
M.T.
,
Kelly
,
R.G.
, “
Evaluation of maximum pit size model on stainless steel under atmospheric conditions
”.
ECSV Trans.
 
58
,
2014
,
41
–
50
.
https://doi.org/10.1149/05829.0041ecst
Google Scholar
Crossref
Search ADS
 
7.
Otero
,
E.
,
Pardo
,
A.
,
Utrilla
,
M.
,
Saenz
,
E.
,
Perez
,
F.
, “
Influence of microstructure in the corrosion resistance of AISI type 304L and type 316L sintered stainless steels exposed to ferric chloride solution
”.
Mater. Charat.
 
35
,
1995
,
145
–
151
.
https://doi.org/10.1016/1044-5803(95)00099-2
Google Scholar
Crossref
Search ADS
 
8.
Zatkalikov
 
A
, V.,
Bulovina
,
M.
,
Skorik
,
V.
,
Petrekov
,
L.
, “
Pitting corrosion AISI 316 steel with polished surface
”.
Mater. Eng.
 
17
,
2010
,
135
–
147
.
Google Scholar
 
9.
ASTM E18, ASTM E8 / E8M-13a International
, “
West Conshohocken United States for hardness test and tensile test
”. PA 19428-2959. 100 Barr Harbor Drive, PO Box C700.
10.
ASTM E2248-15, ASTM
, “
Test Method for Impact Testing of MiniaturizedCharpy V-Notch Specimens
”.
International, 100 Barr Harbor Drive
,
West Conshohocken, PA 19428-2959. United States
.
11.
ASTM G48
“
Standard Test Method for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of the Ferric Chloride Solution - Methods E and F
”, February 1, 2002.
12.
Malik
,
A.U.
,
Ahmad
,
S.
,
Andijani
,
I.
,
Al-Fouzan
,
S.
,
1999
.
Corrosion behavior of steels in Gulf seawater environment
.
Desalination
 
123
,
205e213
.
https://doi.org/10.1016/S0011-9164(99)00078-8
Google Scholar
Crossref
Search ADS
 
13.
Abood
,
T.H.
,
2008
.
The Influence of Various Parameters on Pitting Corrosion of 316l and 202 Stainless Steel
.
Department of Chemical Engineering of the University of Technology. University of Technology.
Google Scholar
 
14.
Szklarska-Smialowska
,
Z.
 ,
1986
.
Pitting corrosion of metals
.
Natl. Assoc. Corros. Eng.
Google Scholar
 
Tang
,
X.
,
Cheng
,
Y.
,
2011
.
Quantitative characterization by micro-electrochemical measurements of the synergism of hydrogen, stress and dissolution on near neutral pH stress corrosion cracking of pipelines
.
Corros. Sci.
 
53
,
2927e2933
.
Google Scholar
 
15.
Bhandari
,
J.
,
Khan
,
F.
,
Abbassi
,
R.
,
Garaniya
,
V.
,
Ojeda
,
R.
,
2015
.
Modelling of pitting corrosion in marine and offshore steel structures-a technical review
.
J. Loss Prev. Process Ind.
 
37
,
39e62
.
https://doi.org/10.1016/j.jlp.2015.06.008
Google Scholar
Crossref
Search ADS
 
16.
Melchers
,
R.
,
2002
.
Effect of temperature on the marine immersion corrosion of carbon steels
.
Corrosion
 
58
,
768e782
.
https://doi.org/10.5006/1.3277660
Google Scholar
Crossref
Search ADS
 
17.
G.
 
Frankel
,
Pitting corrosion of metals a review of the critical factors
,
Journal of the Electrochemical Society
,
145
(
1998
)
2186
–
2198
.
https://doi.org/10.1149/1.1838615
Google Scholar
Crossref
Search ADS
 
18.
R.
 
Abdel-Ghany
,
S.
 
Saad-Eldeen
,
H.
 
Leheta
.
The Effect of Pitting Corrosion on the Strength Capacity of Steel Offshore Structures
, in:
ASME 2008 27th International Conference on Offshore Mechanics and Arctic Engineering, American Society of Mechanical Engineers
,
2008
, pp.
801
–
805
.
Google Scholar
Crossref
Search ADS
 
19.
H.
 
Luo
,
X.G.
 
Li
,
C.F.
 
Dong
,
K.
 
Xiao
.
Effect of solution treatment on pitting behaviour of 2205 duplex stainless steel
.
Arabian Journal of Chemistry
(
2017
)
10
.
S90
–
S94
.
https://doi.org/10.1016/j.arabjc.2012.06.011
Google Scholar
Crossref
Search ADS
 
20.
Xiangyu
 
Hou
,
Lili
 
Gao
,
Zhendong
 
Cui
 and
Jainhua
 
Yin
.
Corrosion and Protection of Metal in the seawater Desalination
.
IOP Conference Series: Earth and Environmental Science
 
108
(
2018
)
022037
.
Google Scholar
Crossref
Search ADS
 
21.
Hongyi
 
Su
,
Yi
 
Liang
,
Bo
 
Wang
,
Hui
 
Tong
,
Yue
 
Yuan
,
Shicheng
 
Wei
.
Effect of Dissolved Oxygen on Pitting Corrosion Behavior of Low-Alloy Steel underHydrostatic Pressure
.
22.
Roland
 
Tolulope
,
Clephas
 
Akintoye
,
Loto
,
Idehai
 
Ohijegbon
.
Effect of heat treatment processes on the localized corrosion resistence of austenitic stainless steel type 301 in Chloride/sulphate solution
.
Research in Physics
 
11
(
2018
)
570
–
576
.
Google Scholar
 
This content is only available via PDF.
© 2019 Author(s).
2019
Author(s)