The article deals with the results of the research and analysis of the influence of an initial deflection on movements and deformations of the reinforced flexible plates, loaded by not symmetric transverse force. The flexible plate from the material St3 has been accepted as a design model. The plate has been divided into 2 panels, square in respect of (a × b = 50 × 50 (cm)). The rib with the eccentricity with respect to a middle plane of the plate has been put on the center of the plate. The plates have been considered in thickness of 0,7h, h: and 1,5h (h = 1 cm). The size of ribs bp × hp = 3 × 3; 4 × 4; 4 × 6 (cm), respectively, has a symmetric initial deflection. To analyze the stress-strain state, deflection diagrams and strain intensity graphs have been constructed and analyzed, depending on the magnitude and direction of the initial deflection at different values of the transverse force, causing both elastic and elastic-plastic deformations.
Skip Nav Destination
,
,
,
Article navigation
29 April 2019
PROCEEDINGS OF THE X ALL-RUSSIAN CONFERENCE “FUNDAMENTAL AND APPLIED PROBLEMS OF MODERN MECHANICS” (FAPMM 2018)
3–5 September 2018
Tomsk, Russia
Research Article|
April 29 2019
Mathematical method of design of reinforced plates with initial deflection Free
Tatiana Treputneva;
Tatiana Treputneva
a)
1
Tomsk State University of Architecture and Building
, 2 Solyanaya Sq., Tomsk, 634003, Russia
a)Corresponding author: [email protected]
Search for other works by this author on:
Oleg Popov;
1
Tomsk State University of Architecture and Building
, 2 Solyanaya Sq., Tomsk, 634003, Russia
Search for other works by this author on:
Margarita Moiseenko;
1
Tomsk State University of Architecture and Building
, 2 Solyanaya Sq., Tomsk, 634003, Russia
Search for other works by this author on:
Marina Savintseva
1
Tomsk State University of Architecture and Building
, 2 Solyanaya Sq., Tomsk, 634003, Russia
Search for other works by this author on:
Tatiana Treputneva
1,a)
Oleg Popov
1
Margarita Moiseenko
1
Marina Savintseva
1
1
Tomsk State University of Architecture and Building
, 2 Solyanaya Sq., Tomsk, 634003, Russia
a)Corresponding author: [email protected]
AIP Conf. Proc. 2103, 020019 (2019)
Citation
Tatiana Treputneva, Oleg Popov, Margarita Moiseenko, Marina Savintseva; Mathematical method of design of reinforced plates with initial deflection. AIP Conf. Proc. 29 April 2019; 2103 (1): 020019. https://doi.org/10.1063/1.5099883
Download citation file:
Citing articles via
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
With synthetic data towards part recognition generalized beyond the training instances
Paul Koch, Marian Schlüter, et al.