The aim of this paper is to highlight the possibilities of efficient designing of gear mechanisms in the Autodesk Inventor Professional graphical system. Using the various special software tools, techniques and work methodology has a significant impact to the overall performance of the designer. The article describes the methodology that has been developed specifically for designing different types of gears. An example of the design of a combined transmission which consist from a single-stage gearbox and a belt drive gear is described in the using the application of the recommended work procedure.

1.
J.
Haľko
,
S.
Pavlenko
and
J.
Maščenik
, Navrhovanie pohonných staníc s ozubenými, remeňovými a reťazovými prevodmi: učebné texty pre riešenie semestrálneho projektu z Časti strojov (
Design of drive stations with spur gears, belt and chain drives: textbooks for solving semester project from Machine parts)
. (
Technická univerzita
,
Košice
,
2013
), p.
220
, ISBN 978-80-553-1504-1.
2.
L.
Málik
and
S.
Hrček
,
Všeobecný model výpočtu prevodových mechanizmov so stupňovou a plynulou zmenou prevodového pomeru postavených na báze mechanického, hydraulického, hydromechanického prevodu s postupným a deleným tokom výkonu
(
Žilinská univerzita
,
Žilina
,
2016
), p.
468
, ISBN 978-80-554-1239-9.
3.
J.
Maščenik
, “
Design of a material cutting device with option of length adjustment of wooden cutting substance
” in
MM Science Journal
, vol.
2017
, no. December (
2017
), p.
1919
1923
. ISSN .
4.
J.
Maščenik
,
S.
Pavlenko
and
Ľ.
Bičejová
, “
A device designed to monitor new belt types with application of diagnostic system
” in
MM Science Journal
, vol.
2016
, no. September (
2016
), p.
931
934
, ISSN ,
5.
K.
Monková
and
A.
Šmeringaiová
, Krok za krokom v softvéri Inventor Professional (
Step by step in Inventor Professional)
(
Asociace RISE
,
Praha
,
2017
), p.
178
, ISBN 978-80-87670-20-0.
6.
K.
Monková
, Kinematická analýza mechanizmov I. časť (
Kinematic analysis of mechanisms)
, (
RISE Asociation
,
Praha
,
2015
).
157
s.
7.
Z.
Murčinková
, “
Bearing Shaft Accuracy as One of Vibration Sources and Industrial Application
,” in
International Journal of Scientific Research in Computer Science, Engineering and Information Technology
, vol.
1
, no.
2
(
2016
), pp.
83
90
, ISSN .
8.
Z.
Murčinková
,
J.
Murčinko
and
P.
Adamčík
, “
The multi-parameter on-line monitoring system applied for rotating machinery
.” in
Review of Industrial Engineering Letters
, vol.
3
, no.
2
(
2016
), pp.
19
28
, ISSN .
9.
J. E.
Shigley
,
J. E.
Mishke
and
R. G.
Budynas
, Konstruování strojních součástí (
Mechanical Engineering Design)
, (
VUT, Nakladatelství VUTIUM
,
Brno
,
2010
), ISBN 978-80-214-2629-0.
10.
S.
Pavlenko
,
J.
Haľko
and
J.
Maščenik
, Časti a mechanizmy strojov (
Parts and mechanisms of machines)
, (
TU
,
Košice
,
2017
), p.
249
, ISBN 978-80-553-2844-7.
11.
S.
Pavlenko
, “
Design and check of the mechanical components by the PC application
” in
MM Science Journal
, vol.
2017
, no. December, pp.
1914
1918
, ISSN .
12.
A.
Šmeringaiová
, “
Modeling and simulation of mechanisms
,” in
Quaere 2014: Reviewed Proceedings
13.
A.
Šmeringaiová
and
Z.
Murčinková
, “Computer Analysis of Mechanisms,” in
Trends in education 2018
, (
Univerzita Palackého Olomouc
,
2018
), pp.
63
71
, ISSN .
14.
A.
Šmeringaiová
and
P.
Šmeringai
, “Dynamic model of the test station for gear drives dynamic tests,” in
Key Engineering Materials
, vol.
669
, Operation and Diagnostics of Machines and Production Systems Operational States 3. (
TTP
,
Switzerland
,
2016
), pp.
434
442
, ISSN .
This content is only available via PDF.