To protect the acoustical environment of auditorium in performing place, this paper mainly focusses on the emission noise measurement method of stage machinery. For the high noise and frequently-used equipment during the performance, the measurement equipment, environment and condition, detection position, evaluation parameter, tested object and the running requirement are all studied and discussed. In particular, the suitable test point and load demand is analyzed through the simulation of EASE software and the noise measurement under laboratory environment. Our research aims to provide the basic work for developing the draft standard for stage machinery noise, which has certain application value to improve the audio-visual effects and control the noise pollution for modern theatre.
Skip Nav Destination
Article navigation
9 November 2018
3RD INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE, RESOURCE AND ENVIRONMENTAL ENGINEERING (MSREE 2018)
26–28 October 2018
Changsha City, China
Research Article|
November 09 2018
Research on emission noise measurement of stage machinery in performing place
Zhibin Su;
Zhibin Su
a)
1
Key Laboratory of Acoustic Visual Technology and Intelligent Control System, Ministry of Culture and Tourism; Communication University of China, Beijing
, China
Search for other works by this author on:
Bing Liu;
Bing Liu
b)
1
Key Laboratory of Acoustic Visual Technology and Intelligent Control System, Ministry of Culture and Tourism; Communication University of China, Beijing
, China
Search for other works by this author on:
Jingyu Liu;
Jingyu Liu
c)
1
Key Laboratory of Acoustic Visual Technology and Intelligent Control System, Ministry of Culture and Tourism; Communication University of China, Beijing
, China
Search for other works by this author on:
Hui Ren;
Hui Ren
d)
1
Key Laboratory of Acoustic Visual Technology and Intelligent Control System, Ministry of Culture and Tourism; Communication University of China, Beijing
, China
d)Corresponding author email: [email protected]
Search for other works by this author on:
Fakong Wei
Fakong Wei
e)
2
Lanzhou University of Technology of Stage Equipment Institute
, China
Search for other works by this author on:
d)Corresponding author email: [email protected]
AIP Conf. Proc. 2036, 030034 (2018)
Citation
Zhibin Su, Bing Liu, Jingyu Liu, Hui Ren, Fakong Wei; Research on emission noise measurement of stage machinery in performing place. AIP Conf. Proc. 9 November 2018; 2036 (1): 030034. https://doi.org/10.1063/1.5075687
Download citation file:
168
Views
Citing articles via
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Related Content
Noise in the operating rooms of Greek hospitals
J. Acoust. Soc. Am. (February 2008)
Noise control and the machinery safety standardization program of CEN (European Standardization Committee)
J Acoust Soc Am (November 2000)
Comparison of calculated and measured sound power levels of large machinery and small hand‐held tools
J Acoust Soc Am (August 2005)
On the use of micro-perforates for machinery and vehicle noise control
J Acoust Soc Am (September 2012)
Noise measurements on machinery near a reflecting plane
J Acoust Soc Am (August 2005)