This study is concerned with the behavior of stress and strain in a thick walled functionally graded material (FGM) cylinder under internal pressure. The incompatible eigenstrain and equivalent eigenstrain developed in the cylinder, are taken into account. As a demonstration, a TiC/Al2O3 FGM cylinder is considered and different components of stress and strain are presented in order to study the effects of internal pressure, temperature difference (between room and sintering temperature), cylinder wall thickness and material distribution. The numerical result presented here shows that the thermoelastic characteristic like stress and strain of an FGM cylinder is significantly influenced by some of the above-mentioned parameters and can be controlled by properly controlling these parameters.
Skip Nav Destination
Article navigation
28 December 2017
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED SCIENCE (ICMEAS 2017)
22–23 February 2017
Dhaka, Bangladesh
Research Article|
December 28 2017
Analysis of thermoelastic characteristics in a thick walled FGM cylinder
A. N. M. Tanvir;
A. N. M. Tanvir
a)
1
Bangladesh University of Engineering and Technology
, Bangladesh
Search for other works by this author on:
Md. Didarul Islam;
Faisal Ahmed
Faisal Ahmed
c)
1
Bangladesh University of Engineering and Technology
, Bangladesh
Search for other works by this author on:
AIP Conf. Proc. 1919, 020030 (2017)
Citation
A. N. M. Tanvir, Md. Didarul Islam, Faisal Ahmed; Analysis of thermoelastic characteristics in a thick walled FGM cylinder. AIP Conf. Proc. 28 December 2017; 1919 (1): 020030. https://doi.org/10.1063/1.5018548
Download citation file:
Citing articles via
Related Content
Finite element solution for stress and strain in FGM circular disk
AIP Conference Proceedings (August 2019)
Static analysis of skew functionally graded material (FGM) plate using triangular element
AIP Conference Proceedings (November 2020)
Convergence behavior of DKMQ element in functionally graded material (FGM) skew plate
AIP Conference Proceedings (November 2020)
A review on modal characteristics of FGM structures
AIP Conf. Proc. (September 2019)
Nonlinear Vibration of the Cantilever FGM Plate Based on the Third‐order Shear Deformation Plate Theory
AIP Conference Proceedings (May 2010)