The inland waterway plays a very important role in the transportation system of Bangladesh. But, due to severe deficiencies of the safety practices, a lot of accidentll take place almost every year in the inland waterways that cause considerable loss of human lives and assets. The inland waterway accidentll in Bangladasb during 2005 to 2015 were analysed statistically in the present study. It has been found that the leading mode of accidents is collision among vessels and fatal injury comprises considerably a higher proportion of total casnalties. The study also revealed that cargo vessels and passenger vessels encounter more accidents in comparison to other types of vessels. It was also observed that during fair weather and good visibility condition significant proportion of accidents have taken place. Based on this study several recommendstions bsve been put forward for improving ssfety in the inlsnd waterways ofBanglsdesh.
Skip Nav Destination
Article navigation
28 December 2017
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED SCIENCE (ICMEAS 2017)
22–23 February 2017
Dhaka, Bangladesh
Research Article|
December 28 2017
An insight into the maritime accident characteristics in Bangladesh
Md. Imran Uddin;
Md. Imran Uddin
a)
1
Accident Research Institute, Bangladesh University of Engineering and Technology
, Dhaka 1000, Bangladesh
Search for other works by this author on:
Zobair Ibn Awal
Zobair Ibn Awal
b)
1
Departm.ent of Naval Architecture and Marine Engineering, Bangladesh University of Engineering and Technology
, Dhaka 1000, Bangladesh
Search for other works by this author on:
a)
Corresponding author: mdirnran.buet@gmail.com
AIP Conf. Proc. 1919, 020011 (2017)
Citation
Md. Imran Uddin, Zobair Ibn Awal; An insight into the maritime accident characteristics in Bangladesh. AIP Conf. Proc. 28 December 2017; 1919 (1): 020011. https://doi.org/10.1063/1.5018529
Download citation file:
Citing articles via
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.