This paper reviews the literature on the response of polymers to high strain rate deformation. The main focus is on the experimental techniques used to characterize this response. The paper includes a small number of examples as well as references to experimental data over a wide range of rates, which illustrate the key features of rate dependence in these materials; however this is by no means an exhaustive list. The aim of the paper is to give the reader unfamiliar with the subject an overview of the techniques available with sufficient references from which further information can be obtained. In addition to the ‘well established’ techniques of the Hopkinson bar, Taylor Impact and Transverse impact, a discussion of the use of time-temperature superposition in interpreting and experimentally replicating high rate response is given, as is a description of new techniques in which mechanical parameters are derived by directly measuring wave propagation in specimens; these are particularly appropriate for polymers with low wave speeds. The vast topic of constitutive modelling is deliberately excluded from this review.

1.
S.M.
Walley
,
J.E.
Field
,
P.H.
Pope
, and
N.A.
Safford
,
J Phys III France 1
1
(
12
),
1889
1925
(
1991
).
2.
S.M.
Walley
,
J.E.
Field
,
P.H.
Pope
, and
N.A.
Safford
,
Phil.Trans. R. Soc. A.
328
(
1597
),
1
33
(
1989
).
3.
S.M.
Walley
and
J.E.
Field
,
DYMAT Journal
1
,
211
228
(
1994
).
4.
D.M.
Williamson
,
C.R.
Siviour
,
W.G.
Proud
,
S.J.P.
Palmer
,
R.
Govier
,
K.
Ellis
,
P.
Blackwell
, and
C.
Leppard
,
J. Phys D: Appl. Phys.
41
(
8
),
085404
(
2008
).
5.
C.R.
Siviour
,
S.M.
Walley
,
W.G.
Proud
, and
J.E.
Field
,
Polymer
46
(
26
),
12546
12555
(
2005
).
6.
P.J.
Rae
and
D.M.
Dattelbaum
,
Polymer
45
(
22
),
7615
7625
(
2004
).
7.
M.L.
Williams
,
R.F.
Landel
, and
J.D.
Ferry
,
J. Am. Chem. Soc.
77
(
14
),
3701
3707
(
1955
).
8.
E.N.
Brown
,
P.J.
Rae
, and
E.B.
Orler
,
Polymer
47
(
21
),
7506
7518
(
2006
).
9.
E.N.
Brown
,
P.J.
Rae
,
E.B.
Orler
,
G.T.
Gray
, and
D.M.
Dattelbaum
,
Mat. Sci. Eng., C
26
(
8
),
1338
1343
(
2006
).
10.
E.N.
Brown
,
C.P.
Trujillo
,
G.T.
Gray
,
P.J.
Rae
, and
N.K.
Bourne
,
J. Appl. Phys.
101
(
2
),
024916
(
2007
).
11.
P.J.
Rae
and
E.N.
Brown
,
Polymer
46
(
19
),
8128
8140
(
2005
).
12.
P.J.
Rae
,
E.N.
Brown
,
B.E.
Clements
, and
D.M.
Dattelbaum
,
J. Appl. Phys.
98
(
6
),
063521
(
2005
).
13.
N.K.
Bourne
,
E.N.
Brown
,
J.C.F.
Millett
, and
G.T.
Gray
, III
,
J. Appl. Phys.
103
(
7
),
074902
(
2008
).
14.
R.
Gerlach
,
C.R.
Siviour
,
N.
Petrinic
, and
J.
Wiegand
,
Polymer
49
(
11
),
2728
2737
(
2008
).
15.
O.A.
Shergold
,
N.A.
Fleck
, and
D.
Radford
,
Int. J Impact Eng.
32
(
9
),
1384
1402
(
2006
).
16.
M.F.
Ashby
,
Acta Metallurgica
37
(
5
),
1273
1293
(
1989
).
17.
M.J.
Kendall
and
C.R.
Siviour
,
Proc. R Soc. A
470
(
2167
),
20140012
(
2014
).
18.
J.E.
Field
,
S.M.
Walley
,
W.G.
Proud
,
H.T.
Goldrein
, and
C.R.
Siviour
,
Int. J. Impact Eng.
30
(
7
),
725
775
(
2004
).
19.
S.M.
Walley
,
W.G.
Proud
,
P.J.
Rae
and
J.E.
Field
, “
The dynamic temperature measurement of split Hopkinson bar specimens using small thermocouples and infrared streak photography
” in
Dymat 2009: 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
, Vol
1
,
511
516
(
2009
).
20.
M.J.
Kendall
,
R.F.
Froud
, and
C.R.
Siviour
,
Polymer
55
(
10
),
2514
2522
(
2014
).
21.
S.M.
Walley
,
W.G.
Proud
,
P.J.
Rae
, and
J.E.
Field
,
Rev. Sci. Instrum.
71
(
4
),
1766
1771
(
2000
).
22.
A.T.
Zehnder
,
P.R.
Guduru
,
A.J.
Rosakis
, and
G.
Ravichandran
,
Rev. Sci. Instrum.
71
(
10
),
3762
3768
(
2000
).
23.
P.R.
Guduru
,
A.T.
Zehnder
,
A.J.
Rosakis
, and
G.
Ravichandran
,
Eng. Fract. Mech.
68
(
14
),
1535
1556
(
2001
).
24.
G.T.
Gray
 III
, Classic split-Hopkinson pressure bar testing, in
ASM Handbook. Vol. 8: Mechanical Testing and Evaluation
,
H.
Kuhn
and
D.
Medlin
, Editors.
2000
,
ASM International
:
Materials Park, Ohio
. p.
462
476
.
25.
G.T.
Gray
 III
and
W.R.
Blumenthal
, Split-Hopkinson pressure bar testing of soft materials, in
ASM Handbook. Vol. 8: Mechanical Testing and Evaluation
,
H.
Kuhn
and
D.
Medlin
, Editors.
2000
,
ASM International
:
Materials Park, Ohio
. p.
488
496
.
26.
W.N.W.
Chen
and
B.
Song
,
Split Hopkinson (Kolsky) Bar: Design, Testing and Applications
(
Springer
,
New York
,
2011
).
27.
K.T.
Ramesh
, “High Rate and Impact Experiments”, in
Springer Handbook of Experimental Solid Mechanics
, edited by
W.N.J.
Sharpe
(
Springer
,
New York
,
2008
) pp.
929
960
.
28.
W.
Chen
,
F.
Lu
,
D.J.
Frew
, and
M.J.
Forrestal
,
J. Appl. Mech.-T. ASME
69
(
3
),
214
223
(
2002
).
29.
C.R.
Siviour
, “
High strain rate properties of materials using Hopkinson bar techniques
” PhD Thesis,
Cambridge University
2005
.
30.
B.J.
Briscoe
and
R.W.
Nosker
,
Wear
95
(
3
),
241
262
(
1984
).
31.
H.
Kolsky
,
Proc Phys Soc Lond B
62
,
676
700
(
1949
).
32.
E.D.H.
Davies
and
S.C.
Hunter
,
J. Mech. Phys. Solids
11
(
3
),
155
179
(
1963
).
33.
D.A.
Gorham
,
J. Phys. D: Appl. Phys.
22
,
1888
1893
(
1989
).
34.
B.
Song
,
Y.
Ge
,
W.W.
Chen
, and
T.
Weerasooriya
,
Exp. Mech.
47
(
5
),
659
670
(
2007
).
35.
M.J.
Forrestal
,
T.W.
Wright
, and
W.
Chen
,
Int. J. Impact Eng
34
(
3
),
405
411
(
2007
).
36.
W.
Chen
,
F.
Lu
, and
B.
Zhou
,
Exp. Mech.
40
(
1
),
1
6
(
2000
).
37.
H.
Zhao
,
G.
Gary
, and
J.R.
Klepaczko
,
Int. J. Impact Eng
19
(
4
),
319
330
(
1997
).
38.
H.
Zhao
and
G.
Gary
,
J. Mech. Phys. Solids
45
(
7
),
1185
1202
(
1997
).
39.
L.L.
Wang
,
K.
Labibes
,
Z.
Azari
, and
G.
Pluvinage
,
Int. J. Impact Eng.
15
(
5
),
669
686
(
1994
).
40.
O.
Sawas
,
N.S.
Brar
, and
R.A.
Brockman
,
Exp. Mech.
38
(
3
),
204
210
(
1998
).
41.
W.
Chen
,
B.
Zhang
, and
M.J.
Forrestal
,
Exp. Mech.
39
(
2
),
81
85
(
1999
).
42.
T.P.M.
Johnson
,
S.S.
Sarva
, and
S.
Socrate
,
Exp. Mech.
50
(
7
),
931
940
(
2010
).
43.
J.J.
Harrigan
,
B.
Ahonsi
,
E.
Palamidi
, and
S.R.
Reid
,
Phil. Trans. R. Soc. A
372
(
2023
) (
2014
).
44.
M.
Aleyaasin
and
J.J.
Harrigan
,
Int. J Mech. Sci.
52
(
5
),
754
757
(
2010
).
45.
B.
Ahonsi
,
J.J.
Harrigan
, and
M.
Aleyaasin
,
Int. J. Impact Eng.
45
,
39
51
(
2012
).
46.
R.J.
Wasley
,
K.G.
Hoge
, and
J.C.
Cast
,
Rev. Sci. Instrum.
40
(
7
),
889
(
1969
).
47.
M.J.
Kendall
,
D.R.
Drodge
,
R.F.
Froud
, and
C.R.
Siviour
,
Meas. Sci. Technol.
25
(
7
),
2514
2522
(
2014
).
48.
B.
Song
,
C.J.
Syn
,
C.L.
Grupido
,
W.
Chen
, and
W.Y.
Lu
,
Exp. Mech.
48
(
6
),
809
815
(
2008
).
49.
Z.
Han
and
G.
Gary
,
J. Mech. Phys. Solids
45
(
7
),
1185
1202
(
1997
).
50.
C.
Bacon
,
Int. J. Impact Eng.
22
(
1
),
55
69
(
1999
).
51.
J.
Shim
and
D.
Mohr
,
Int. J. Impact Eng.
36
(
9
),
1116
1127
(
2009
).
52.
S.
Hiermaier
and
T.
Meenken
,
J. Strain Anal. Eng. Des.
45
(
6
),
401
409
(
2010
).
53.
R.
Chen
,
S.
Huang
,
K.
Xia
, and
F.
Lu
,
Rev. Sci. Instrum.
80
(
7
),
076108
(
2009
).
54.
C.
Kan
,
W.
Yang
, and
W.
Yu
,
Int. J. Solids Struct.
51
(
13
),
2539
48
(
2014
).
55.
S.
Fu
,
Y.
Wang
, and
Y.
Wang
,
Polymer Testing
28
(
7
),
724
729
(
2009
).
56.
J.T.
Fan
,
J.
Weerheijm
, and
L.J.
Sluys
,
Polymer
65
,
72
80
(
2015
).
57.
W.
Chen
,
F.
Lu
, and
M.
Cheng
,
Polymer Testing
21
(
2
),
113
121
(
2002
).
58.
K.
Cao
,
Y.
Wang
, and
Y.
Wang
,
Materials & Design
38
,
53
58
(
2012
).
59.
M.
Foster
,
B.
Claus
,
N.
Parab
,
B.
Lim
,
W.
Chen
,
T.
Sun
,
K.
Fezza
,
Journal of Dynamic Behavior of Materials
1
(
2
),
162
175
(
2015
).
60.
R.
Gerlach
,
S.K.
Sathianathan
,
C.
Siviour
, and
N.
Petrinic
,
Int. J. Impact Eng.
38
(
12
),
976
980
(
2011
).
61.
R.
Gerlach
,
C.
Kettenbeil
, and
N.
Petrinic
,
Int. J. Impact Eng.
50
,
63
67
(
2012
).
62.
M.
Cheng
and
W.N.
Chen
,
Int. J. Solids Struct.
40
(
18
),
4749
4768
(
2003
).
63.
X.
Nie
,
B.
Song
,
Y.
Ge
,
W.W.
Chen
, and
T.
Weerasooriya
,
Exp. Mech.
49
(
4
),
451
458
(
2009
).
64.
S.S.
Sarva
and
M.C.
Boyce
,
J. Mech. Mater. Struct.
2
(
10
),
1853
1880
(
2007
).
65.
J.
Cai
,
S.M.
Walley
,
R.J.A.
Hunt
,
W.G.
Proud
,
V.F.
Nesterenko
, and
M.A.
Meyers
,
Mat. Sci. Eng., A
472
(
1-2
),
308
315
(
2008
).
66.
M.L.
Dannis
and
R.E.
Watling
,
Rev. Sci. Instrum.
37
(
12
),
1716
(
1966
).
67.
O.
Ramon
,
S.
Mizrahi
, and
J.
Miltz
,
Polym. Eng. Sci.
34
(
18
),
1406
1410
(
1994
).
68.
G.M.
Swallowe
and
S.F.
Lee
,
J. Phys. IV
110
,
33
38
(
2003
).
69.
S.F.
Lee
and
G.M.
Swallowe
,
Imaging Sci. J.
52
(
4
),
193
201
(
2004
).
70.
A.
Trautmann
,
C.R.
Siviour
,
S.M.
Walley
, and
J.E.
Field
,
Int. J. Impact Eng.
31
(
5
),
523
544
(
2005
).
71.
J.E.
Balzer
,
C.R.
Siviour
,
S.M.
Walley
,
W.G.
Proud
, and
J.E.
Field
,
Proc. R. Soc. A
460
(
2043
),
781
806
(
2004
).
72.
P.
Viot
,
F.
Beani
, and
J.L.
Lataillade
,
J. Mat. Sci.
40
(
22
),
5829
5837
(
2005
).
73.
J.S.
Foot
,
R.W.
Truss
,
I.M.
Ward
, and
R.A.
Duckett
,
J. Mat. Sci.
22
(
4
),
1437
1442
(
1987
).
74.
N.S.
AlMaliky
and
D.J.
Parry
,
Meas. Sci. Technol.
7
(
5
),
746
752
(
1996
).
75.
F.
Scarpa
,
L.G.
Ciffo
, and
J.R.
Yates
,
Smart Mater. Struct.
13
(
1
),
49
56
(
2004
).
76.
T.J.
Cloete
and
M.
Stander
,
EPJ Web of Conferences
26
,
01025
(
6 pp.)-01025 (6 pp
.) (
2012
).
77.
T.J.
Cloete
,
G.
Paul
, and
E.B.
Ismail
,
Phil. Trans. R. Soc. A
372
(
2015
) (
2014
).
78.
T.J.
Cloete
and
S.
Oxtoby
A new technique for compression tests at intermediate strain rates: Prototype results
” in
Dymat 2009: 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
, Vol
1
.
249
255
(
2009
).
79.
P.H.
Mott
,
J.N.
Twigg
,
D.F.
Roland
,
H.S.
Schrader
,
J.A.
Pathak
, and
C.M.
Roland
,
Rev. Sci. Instrum.
78
(
4
) (
2007
).
80.
M.M.
LeBlanc
and
D.H.
Lassila
,
Exp. Techniques
20
(
5
),
21
24
(
1996
).
81.
S.N.
Wosu
,
D.
Hui
, and
P.K.
Dutta
,
Eng. Fract. Mech.
72
(
10
),
1531
1558
(
2005
).
82.
S.
Dong
,
Y.
Wang
, and
Y.
Xia
,
Polymer Testing
25
(
7
),
943
952
(
2006
).
83.
H.
Koerber
,
J.
Xavier
, and
P.P.
Camanho
,
Mech. Mater.
42
(
11
),
1004
1019
(
2010
).
84.
C.T.
Sun
and
C.
Han
,
Composites Part B
35
(
6-8
),
647
655
(
2004
).
85.
T.
Kusaka
,
M.
Hojo
,
Y.W.
Mai
,
T.
Kurokawa
,
T.
Nojima
, and
S.
Ochiai
,
Compos. Sci. Technol.
58
(
3-4
),
591
602
(
1998
).
86.
R.
Gerlach
,
A.
Pabst
,
N.
Petrinic
,
A.
Hornig
,
J.
Wiegand
,
C.R.
Siviour
, and
W.
Hufenbach
,
Compos. Sci. Technol.
69
(
11-12
),
2024
2026
(
2009
).
87.
J.C.F.
Millett
,
G.
Whiteman
,
S.M.
Stirk
, and
N.K.
Bourne
,
J. Phys. D: Appl. Phys.
44
(
18
) (
2011
).
88.
J.C.F.
Millett
,
N.K.
Bourne
, and
G.T.
Gray
,
J. Phys. D: Appl. Phys.
37
(
6
),
942
947
(
2004
).
89.
J.C.F.
Millett
,
N.K.
Bourne
, and
G.T.
Gray
,
J. Appl. Phys.
96
(
10
),
5500
5504
(
2004
).
90.
J.C.F.
Millett
and
N.K.
Bourne
,
J. Phys. D: Appl. Phys.
37
(
20
),
2901
2907
(
2004
).
91.
J.C.F.
Millett
and
N.K.
Bourne
,
J. Phys. D: Appl. Phys.
9
(
5
),
2576
2579
(
2001
).
92.
T.
Jiao
,
R.J.
Clifton
, and
S.E.
Grunschel
, “Pressure-sensitivity and tensile strength of an elastomer at high strain rates”, in
Shock Compression of Condensed Matter - 2007
, edited by
M.
Elert
,
M.D.
Furnish
,
R.
Chau
,
N.C.
Holmes
, and
J.
Nguyen
, (
American Institute of Physics
,
Melville, NY
,
2007
). pp.
707
710
.
93.
T.
Jiao
and
R.J.
Clifton
, “
Measurement of the response of an elastomer at pressures up to 9 GPa and shear-rates of 105 – 106 s−1
J. Phys.: Conf. Ser.
500
112036
(
2014
)
94.
N.K.
Bourne
,
J.C.F.
Millett
,
E.N.
Brown
, and
G.T.
Gray
, III
,
J. Appl. Phys.
102
(
6
) (
2007
).
95.
A.S.
Abou-Sayed
and
R.J.
Clifton
,
Transactions of the ASME. Series E
,
J. Appl. Mech.
44
(
1
),
79
84
(
1977
).
96.
G.I.
Taylor
,
Proc. R. Soc. A
194
(
1038
),
289
299
(
1948
).
97.
G.I.
Taylor
,
J. Inst. Civil Eng.
26
,
486
519
(
1946
).
98.
D.C.
Erlich
, “Rod Impact (Taylor) Test”, in
Metals Handbook
Vol.
8
(9th edn.). (
American Society of Metals 1985
) pp.
203
207
.
99.
B.J.
Briscoe
and
I.M.
Hutchings
,
Polymer
17
(
12
),
1099
1102
(
1976
).
100.
I.M.
Hutchings
,
J. Mech. Phys. Solids
26
(
5
),
289
301
(
1978
).
101.
E.
Wielewski
,
M.R.
Arthington
,
C.R.
Siviour
,
S.
Carter
,
F.
Hofmann
,
A.M.
Korsunsky
, and
N.
Petrinic
,
J. Strain Anal. Eng. Des.
45
(
6
),
429
437
(
2010
).
102.
S.
Sarva
,
A.D.
Mulliken
, and
M.C.
Boyce
,
Int. J. Solids Struct.
44
(
7-8
),
2381
2400
(
2007
).
103.
H.
Cho
,
S.
Bartyczak
,
W.
Mock
, and
M.C.
Boyce
,
Polymer
54
(
21
),
5952
5964
(
2013
).
104.
J.C.F.
Millett
,
N.K.
Bourne
, and
G.S.
Stevens
,
Int. J. Impact Eng.
32
(
7
),
1086
1094
(
2006
).
105.
P.J.
Rae
,
E.N.
Brown
, and
E.B.
Orler
,
Polymer
48
(
2
),
598
615
(
2007
).
106.
E.N.
Brown
,
C.P.
Trujillo
, and
G.T.
Gray
, III
, “
Influence of polyethylene molecular conformation on Taylor impact measurements: A comparison of HDPE, UHMWPE, and PEX
”, in
Shock Compression of Condensed Matter - 2007
, edited by
M.
Elert
,
M.D.
Furnish
,
R.
Chau
,
N.C.
Holmes
, and
J.
Nguyen
(
American Institute of Physics
,
Melville, NY
,
2007
). pp.
691
694
.
107.
A.D.
Resnyansky
,
N.K.
Bourne
,
E.N.
Brown
,
J.C.F.
Millett
,
P.J.
Rae
,
S.A.
McDonald
, and
P.J.
Withers
,
J. Appl. Phys.
116
(
22
) (
2014
).
108.
J.
Furmanski
,
C.P.
Trujillo
,
D.T.
Martinez
,
G.T.
Gray
, and
E.N.
Brown
,
Polymer Testing
31
(
8
),
1031
1037
(
2012
).
109.
C.P.
Trujillo
,
E.
Brown
, and
G.
Gray
, “Dynamic-tensile-extrusion response of polytetrafluoroethylene (PTFE). and polychlorotrifluoroethylene (PCTFE)”, in
Dynamic Behavior of Materials
.
2011
,
Springer
, pp.
73
75
.
110.
E.N.
Brown
,
C.P.
Trujillo
, and
G.T.
Gray
, III
, “Dynamic-Tensile-Extrusion Response of Fluoropolymers” in
Shock Compression of Condensed Matter - 2009
, edited by
M.L.
Elert
,
W.T.
Buttler
,
M.D.
Furnish
,
W.W.
Anderson
, and
W.G.
Proud
(
American Institute of Physics
,
Melville, NY
,
2009
). pp.
1233
1236
.
111.
E.N.
Brown
,
G.T.
Gray
, III
and
C.P.
Trujillo
Influence of necking propensity on the dynamic-tensile-extrusion response of fluoropolymers
.” in
Dymat 2009: 9th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
, Vol
1
.
2009
. pp.
171
177
.
112.
J.
Furmanski
,
C.
Cady
,
P.
Rae
,
C.P.
Trujillo
,
G.T.
Gray
, III
, and
E.N.
Brown
, “Dynamic-tensile-extrusion of polyurea” in
Shock Compression of Condensed Matter - 2011
, edited by
M.L.
Elert
,
W.T.
Buttler
,
J.P.
Borg
,
J.L.
Jordan
, and
T.J.
Vogler
, (
American Institute of Physics
,
Melville, NY
,
2012
).
113.
E.N.
Brown
,
J.
Furmanski
,
K.J.
Ramos
,
D.M.
Dattelbaum
,
B.J.
Jensen
,
A.J.
Iverson
,
C.A.
Carlson
,
K.
Fezzaa
,
G.T.
Gray
, III
,
B.M.
Patterson
,
C.P.
Trujillo
,
D.T.
Martinez
, and
T.H.
Pierce
High-density polyethylene damage at extreme tensile conditions
J. Phys.: Conf. Ser.
500
112011
(
2014
).
114.
J.
Furmanski
,
E.N.
Brown
,
G.T.
Gray
 III
,
C.
Trujillo
,
D.T.
Martinez
,
S.
Bilyk
and
R.
Becker
, “Extreme tensile damage and failure in glassy polymers via Dynamic-Tensile-Extrusion”, in
Dynamic Behavior of Materials
.
2014
,
Springer
, pp.
107
112
.
115.
J.C.
Smith
,
F.L.
Mccrackin
,
H.F.
Schiefer
,
W.K.
Stone
, and
K.M.
Towne
,
J. Res. Natl Stand.
57
(
2
),
83
89
(
1956
).
116.
J.E.
Field
and
Q.
Sun
, “
A high-speed photographic study of impact on fibres and woven fabrics
.” in
19th International Congress on High-Speed Photography and Photonics, Pts 1 and 2,
edited by
B.
Garfield
and
J.
Rendell
. Vol.
1358
. (
1991
) pp.
703
712
.
117.
D.R.
Drodge
,
B.
Mortimer
,
C.
Holland
, and
C.R.
Siviour
,
J. Mech. Phys. Solids
60
(
10
),
1710
1721
(
2012
)
118.
M.
Hudspeth
,
B.
Claus
,
N.
Parab
,
B.
Lim
,
W.
Chen
,
T.
Sun
and
K.
Fezza
,
Journal of Dynamic Behavior of Materials
1
(
1
),
55
64
(
2015
).
119.
B.P.
Russell
,
K.
Karthikeyan
,
V.S.
Deshpande
, and
N.A.
Fleck
,
Int. J. Impact Eng.
60
,
1
9
(
2013
).
120.
M.J.
Kendall
and
C.R.
Siviour
,
Philos. Trans. R. Soc. Lond, Ser. A.
372
(
2015
) (
2014
).
121.
P.S.
Follansbee
,
G.
Regazzoni
, and
U.F.
Kocks
, “
The transition to drag-controlled deformation in copper at high strain rates
” in
Mechanical Properties at High Rates of Strain: Proceedings of the Third Conference on the Mechanical Properties of Materials at High Rates of Strain
,
71
80
(
1984
).
122.
R.W.
Armstrong
and
S.M.
Walley
,
International Materials Reviews
53
(
3
),
105
128
(
2008
).
123.
K.
Nakai
and
T.
Yokoyama
,
Journal of Dynamic Behavior of Materials
1
(
1
),
15
27
(
2015
).
124.
C.
Bauwens-Crowet
,
J. Mat. Sci.
8
(
7
),
968
979
(
1973
).
125.
J.C.
Bauwens
,
J. Mat. Sci.
7
(
5
),
577
-& (
1972
).
126.
J.A.
Rinde
and
K.G.
Hoge
,
J. Appl. Polym. Sci.
15
(
6
),
1377
-& (
1971
).
127.
J.L.
Jordan
,
C.R.
Siviour
,
J.R.
Foley
, and
E.N.
Brown
,
Polymer
48
(
14
),
4184
4195
(
2007
).
128.
E.N.
Brown
,
R.B.
Willms
,
G.T.
Gray
, III
,
P.J.
Rae
,
C.M.
Cady
,
K.S.
Vecchio
,
J.
Flowers
, and
M.Y.
Martinez
,
Exp. Mech.
47
(
3
),
381
393
(
2007
).
129.
D.G.
Thompson
,
R.
DeLuca
, and
W.J.
Wright
, “Time-temperature superposition applied to PBX mechanical properties”, in
Shock Compression of Condensed Matter - 2011
, edited by
M.L.
Elert
,
W.T.
Buttler
,
J.P.
Borg
,
J.L.
Jordan
, and
T.J.
Vogler
, (
American Institute of Physics
,
Melville, NY
,
2012
).
130.
J.
Furmanski
,
C.M.
Cady
, and
E.N.
Brown
,
Polymer
54
(
1
),
381
390
(
2013
).
131.
A.D.
Mulliken
and
M.C.
Boyce
,
Int. J Solids Struct.
43
(
5
),
1331
1356
(
2006
).
132.
M.J.
Kendall
and
C.R.
Siviour
,
Polymer
54
(
18
),
5058
5063
(
2013
).
133.
B.D.
Goldthorpe
,
A.L.
Butler
, and
P.
Church
,
J. Phys. IV
4
(
C8
),
471
476
(
1994
).
134.
P.
Church
,
R.
Cornish
,
I.
Cullis
,
P.
Gould
, and
I.
Lewtas
,
Phil. Trans. R. Soc. A.
372
(
2023
) (
2014
).
135.
F.
Pierron
,
R.
Cheriguene
,
P.
Forquin
,
R.
Moulart
,
M.
Rossi
, and
M.
Sutton
, “Performances and limitations of three ultra high-speed imaging cameras for full-field deformation measurements” in
Advances in Experimental Mechanics VIII
, edited by
R.L.
Burguete
,
M.
Lucas
,
E.A.
Patterson
, and
S.
Quinn
(
2011
). p.
81
86
.
136.
C.R.
Siviour
,
Meas. Sci.Technol.
20
(
6
) (
2009
).
137.
J.
Niemczura
and
K.
Ravi-Chandar
,
J. Mech. Phys. Solids
59
(
2
),
457
472
(
2011
).
138.
J.
Niemczura
and
K.
Ravi-Chandar
,
J. Mech. Phys. Solids
59
(
2
),
442
456
(
2011
).
139.
J.
Niemczura
and
K.
Ravi-Chandar
,
J. Mech. Phys. Solids
59
(
2
),
423
441
(
2011
).
140.
F.
Pierron
,
H.
Zhu
, and
C.
Siviour
,
Philos. Trans. R. Soc. Lond, Ser. A.
372
(
2023
) (
2014
).
141.
S.-H.
Yoon
,
I.
Giannakopoulos
, and
C.R.
Siviour
,
Int. J Solids Struct.
69–70
,
553
568
(
2015
).
142.
F.
Pierron
and
M.
Grediac
,
Virtual Fields Methods: Extracting Constitutive Mechanical Parameters From Full-field Deformation Measurements
. (
Springer
2012
).
143.
F.
Pierron
,
M.A.
Sutton
, and
V.
Tiwari
,
Exp.Mech.
51
(
4
),
537
563
(
2011
).
144.
F.
Pierron
and
P.
Forquin
,
Strain
48
(
5
),
388
405
(
2012
).
145.
R.
Moulart
,
F.
Pierron
,
S.R.
Hallett
, and
M.R.
Wisnom
,
Exp.Mech.
51
(
4
),
509
536
(
2011
).
146.
C.
Devivier
,
F.
Pierron
, and
M.R.
Wisnom
,
Composites Part A
48
,
201
218
(
2013
).
147.
A.
Benatar
,
D.
Rittel
, and
A.L.
Yarin
,
J. Mech. Phys. Solids
51
(
8
),
1413
1431
(
2003
).
148.
L.
Pochhammer
,
J. Reine Angew. Math.
81
,
324
336
(
1876
).
149.
C.
Chree
,
Quart. J. Pure Appl. Math.
21
,
287
298
(
1886
).
150.
A.
Tyas
and
Z.
Ozdemir
,
Phil.Trans. R. Soc. A.
372
(
2023
) (
2014
).
151.
H.
Kolsky
,
Philosophical Magazine
1
(
8
),
693
-& (
1956
).
152.
Z.
Han
and
G.
Gary
,
J. Mech. Phys. Solids
43
(
8
),
1335
48
(
1995
).
153.
R.M.
Davies
,
Phil.Trans. R. Soc. A.
240
(
821
),
375
457
(
1948
).
154.
S.P.
Anderson
,
Journal of Sound and Vibration
290
(
1-2
),
290
308
(
2006
).
155.
H.
Kolsky
,
Stress Waves in Solids
.
Clarendon Press
,
Oxford
,
1953
.
156.
C.
Bacon
,
Exp. Mech.
38
(
4
),
242
249
(
1998
).
157.
S.
Mousavi
,
D.F.
Nicolas
, and
B.
Lundberg
,
Journal of Sound and Vibration
277
(
4-5
),
971
986
(
2004
).
158.
B.
Lundberg
and
R.H.
Blanc
,
Journal of Sound and Vibration
126
(
1
),
97
108
(
1988
).
159.
K.W.
Hillier
and
H.
Kolsky
,
Proceedings of the Physical Society. Section B
62
(
2
),
111
(
1949
).
This content is only available via PDF.