Magnesium matrix composites reinforced with SiCp particles were fabricated using the semi-solid stir casting process. The purpose of the study was to the effects concentration wt% SiCp and TiB of the mechanical properties of composites Al-Mg-2TiB/SiCp and Al-Mg-4TiB/SiCp. Variations (3, 6, 9 wt.%) SiCp/Al-Mg composites with different SiCp and TiB contents were successfully fabricated by semi-solid stir casting. Mechanical stirring technique carried out in conditions of semi-solid to obtain SiCp particles evenly dispersed. Effects of SiCp and TiB content on mechanical properties were studied by density, porosity, hardness test, impact test and microstructure images. The results indicate that SiCp particles disperse homogeneously in AZ81A matrix, and interfacial reaction between matrix and SiCp particles is effectively controlled. Distribution of SiCp reinforcement and interfacial bonding are improved by adding TiB. Additionally, the mechanical properties of composites are remarkably improved with the SiCp and TiB content increasing. The addition of (2 and 4 wt%) TiB gives grain refinement on the AZ81A matrix.

1.
K.K.
Deng
,
X.J.
Wang
,
W.M.
Gan
,
Y.W.
Wu
,
K.B.
Nie
,
K.
Wu
,
M.Y.
Zheng
,
H.G.
Brokmeier
,
Mater. Sci. Eng. A
528
;
2011
, pp.
1707
1712
.
2.
Y.V.R.K.
Prasad
,
K.P.
Rao
,
M.
Gupta
,
Compos. Sci. Technol.
69
;
2009
, pp.
1070
1076
.
3.
A.
Luo
,
Metall. Mater. Trans. A
26
;
1995
, pp.
2445
2455
.
4.
J.
Hashim
,
L.
Looney
,
M.S.J.
Hashmi
,
J. Mater. Process. Technol.
92–93
;
1999
, pp.
1
7
.
5.
Y.W.
Wu
,
K.
Wu
,
K.K.
Deng
,
K.B.
Nie
,
X.J.
Wang
,
X.S.
Hu
,
M.Y.
Zheng
,
J. Alloys Compd.
506
;
2010
, pp.
688
692
.
6.
G.
Sasaki
,
M.
Yoshida
,
N.
Fuyama
,
T.
Fujii
,
J. Mater. Process. Technol.
130–131
;
2002
, pp.
151
155
.
7.
S.F.
Hassan
and
M.
Gupta
. “
Development of high-performance magnesium nanocomposites using nano-Al2O3 as reinforcement
”.
Mater Sci Eng. A
392
,
163
8
(
2005
).
8.
H.
Abdizadeh
,
M.
Ashuri
,
P.T.
Moghadam
,
A.
Nouribahadory
and
H.R.
Baharvandi
. “
Improvement in physical and mechanical properties of aluminum/zircon composites fabricated by powder metallurgy method
”.
Mater Des.
32
,
4417
23
(
2011
).
9.
L.
Lu
,
K.K.
Thong
and
M.
Gupta
. “
Mg-based composite reinforced by Mg2Si
”.
Compos Sci Technol.
63
,
627
32
(
2003
).
10.
S.F.
Hassan
and
M.
Gupta
. “
Development of high strength magnesium based composites using elemental nickel particulates as reinforcement
”.
J Mater Sci.
37
,
2467
9
(
2002
).
11.
S.J.
Wang
,
G.Q.
Wu
,
Z.H.
Ling
and
Z.
Huang
. “
Microstructure and mechanical properties of YAl2 reinforced MgLiAl composite
”.
Mater Sci Eng. A
518
,
158
61
(
2009
).
12.
Y.
Cai
,
M.J.
Tan
,
G.J.
Shen
and
H.Q.
Su
. “
Microstructure and heterogeneous nucleation phenomena in cast SiC particles reinforced magnesium composite
”.
Mater Sci Eng. A
282
,
232
5
(
2000
).
13.
S.A.
Sajjadi
,
H.R.
Ezatpour
and
M. Torabi
Parizi
. “
Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes
”.
Mater Des.
32
,
106
11
(
2012
).
14.
K.B.
Nie
,
X.J.
Wang
,
K.
Wu
,
L.
Xu
,
M.Y.
Zheng
,
X.S.
Hu
. “
Processing, microstructure and mechanical properties of magnesium matrix nanocomposites fabricated by semisolid stirring assisted ultrasonic vibration
”.
J Alloys Compd.
509
,
8664
9
(
2011
).
15.
Q.B.
Nguyen
and
M.
Gupta
. “
Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates
”.
J Alloys Compd.
459
,
244
50
(
2008
).
16.
A.
Luo
,
Metall. Mater. Trans. A
26
;
1995
, pp.
2445
2455
.
17.
D.J.
Lloyd
,
Int. Mater. Rev.
39
(
1
),
1
23
(
1994
).
18.
M.
Regev
,
A.
Rosen
,
M.
Bamberger
,
Metall. Mater. Trans. A
32
;
2001
, pp.
1335
1345
.
19.
G.
Levi
,
S.
Avraham
,
A.
Zilberov
,
M.
Bamberger
,
Acta Metall.
54
;
2006
, pp.
523
530
.
This content is only available via PDF.