This paper has reviewed the state of Non-Destructive Testing (NDT) as applied to Civil Engineering in the last decade. This review paper reports on NDTs’ application, working principle, configuration, performance, and accuracy. Non-destructive testing (NDT) is also known as non-destructive evaluation (NDE), non-destructive inspection (NDI), and non-destructive testing (NDT). The goal of NDT is to examine a component in a safe, dependable, and cost-effective manner while inflicting no or minimal harm to the equipment and Structure. NDT is important in daily life and is required to ensure safety and dependability. The major use of NDT is to ensure product safety, which has a huge economic value in terms of preventing loss of life and property. It’s vital to employ a range of methods. It’s critical to comprehend the advantages and disadvantages of any test process. NDT procedures assist uncover hidden flaws such as cavities and water penetration within a building, in addition to providing information on material characteristics. Various NDT techniques such as Rebound Hammer, Visual Inspection, Ultrasonic Pulse Velocity (UPV) Test, Rapid Chloride Permeability Test (RCPT), and Water Permeability Test, are described in this paper. Single NDT may lead to the wrong assessment of concrete structures. Combining various NDT will provide the correct structural health result. By Considering various test results correlation can be identified.

1.
International Atomic Energy Agency
, “
Guidebook on non-destructive testing of concrete structures
,” (
2002
).
2.
H.
Williams
, “
Non-destructive testing of concrete structures
,”
Tunnels and Tunnelling International
25
(
12
), (
1993
).
3.
J. M. C.
Ongpeng
, “
Non-destructive testing of concrete structures
,”
Tunnels and Tunnelling International
,
25
(
12
), (
2018
).
4.
P. G.
Asteris
and
V. G.
Mokos
, “
Concrete compressive strength using artificial neural networks
,”
Neural Comput Appl.
32
(
15
), (
2020
).
5.
N.
Ahmad
,
R. A.
Rahim
,
H. A.
Rahim
and
M. H. F.
Rahiman
, “
A review of ultrasonic application on non-destructive testing method for concrete structure
,”
J Teknol
,
3
, (
2014
).
6.
H.
Irie
,
Y.
Yoshida
,
Y.
Sakurada
and
T.
Ito
, “
Non-destructive-testing methods for concrete structures
,”
NTT Technical Review
6
(
5
) (
2008
).
7.
L.
Ebensperger
and
J. P.
Donoso
, “
New methodology for assessment of reinforced concrete structures with non-destructive testing
,”
Revista Ingenieria de Construccion
36
(
2
), (
2021
).
8.
F.
Nucera
and
R.
Pucinotti
, “
Destructive and Non-Destructive Testing on Reinforced Concrete Structure: The Case Study of the Museum of Magna Graecia in Reggio Calabria
,” (
2010
).
9.
P.
Kot
,
M.
Muradov
,
M.
Gkantou
,
G. S.
Kamaris
,
K.
Hashim
and
D.
Yeboah
, “
Recent advancements in non-destructive testing techniques for structural health monitoring
,”
Applied Sciences (Switzerland)
11
(
6
),
2021
.
10.
K.
Ali-Benyahia
,
S.
Kenai
, M.
Ghrici
,
Z. M. Sbartaï
and
S. M.
Elachachi
, “
Analysis of the accuracy of in-situ concrete characteristic compressive strength assessment in real structures using destructive and non-destructive testing methods
,”
Constr Build Mater
366
, (
2023
).
11.
I.
Ivanchev
, “
Research on concrete compressive strength in existing reinforced concrete elements with Schmidt hammer, ultrasonic pulse velocity method and destructive testing of cores
,”
IOP Conf Ser Mater Sci Eng.
1228
(
1
), (
2022
).
12.
Z. M.
Sbartaï
,
D.
Breysse
,
M.
Larget
and
J. P.
Balayssac
, “
Combining NDT techniques for improved evaluation of concrete properties
,”
Cem Concr Compos
34
(
6
), (
2012
).
13.
A.
Aseem
,
W. Latif
Baloch
,
R. A.
Khushnood
and
A.
Mushtaq
, “
Structural health assessment of fire damaged building using non-destructive testing and micro-graphical forensic analysis: A case study
,”
Case Studies in Construction Materials
11
,
2019
.
14.
A.
Zaki
,
H. K.
Chai
,
D. G.
Aggelis
and
N.
Alver
, “
Non-destructive evaluation for corrosion monitoring in concrete: A review and capability of acoustic emission technique
,”
Sensors (Switzerland)
15
(
8
), (
2015
).
15.
C.
Maierhofer
, “
Non-destructive testing of concrete material properties and concrete structures
,”
Cement and Concrete Composites
28
(
4
), (
2006
).
16.
B.
Bolborea
,
C.
Baera
,
S.
Dan
,
A.
Gruin
,
D. D.
Burduhos-Nergis
and
V.
Vasile
, “
Concrete compressive strength by means of ultrasonic pulse velocity and moduli of elasticity
,”
Materials
14
(
22
),
2021
.
17.
N.
Paramanandham
,
D.
Koppad
and
S.
Anbalagan
, “
Vision Based Crack Detection in Concrete Structures Using Cutting-Edge Deep Learning Techniques
,”
Traitement du Signal
39
(
2
), (
2022
).
18.
C.
Maierhofer
,
H. W.
Reinhardt
and
G.
Dobmann
, “
Non-destructive evaluation of reinforced concrete structures: Deterioration processes and standard test methods
,” (
2010
).
19.
R.
Pucinotti
, “
Reinforced concrete structure: Non destructive in situ strength assessment of concrete
,”
Constr Build Mater
75
, (
2015
).
20.
B.
Youcef
,
K.
Said
and
A. B.
Khoudja
, “
Prediction of concrete strength by non-destructive testing in old structures: Effect of core number on the reliability of prediction
,” In
MATEC Web of Conferences
, (
2018
).
21.
A.
Hussein
and
M.
Abdi
, “
Review Paper On Non-Destructive Testing And Their Accuracies To Measure The Mechanical Properties Of Concrete
,”
International Journal of Engineering Applied Sciences and Technology
,
05
,
1
9
, (Apr.
2021
).
22.
Indian Standard and 516:2020
, “
Hardened Concrete — Methods of Test Part 5 Non-Destructive Testing of Concrete Section 4 Rebound Hammer Test
,” (
2020
).
23.
Indian Standard and 516:2018
, “
Hardened Concrete Method of Test Part 5 NDT Section 1 UPV
”.
24.
O. G.
Erhimona
and
J.
Andrew
, “
Recent advances in non-destructive testing of concretes and structures: An outlook
,”
Journal of Civil Engineering and Construction Technology
10
(
3
), (
2019
).
25.
R. L.
Wankhade
and
A. B.
Landage
, “
Non-destructive testing of concrete structures in karad region
,” In
Procedia Engineering
(
2013
).
26.
A.
Rehman
and
M. C.
Paliwal
, “
Monitoring condition of concrete structures through non destructive testing
,” in
AIP Conference Proceedings
,
2019
. doi: .
27.
R. C.
Sriramadasu
,
Y.
Lu
, and
S.
Banerjee
, “
Identification of incipient pitting corrosion in reinforced concrete structures using guided waves and piezoelectric wafer transducers
,”
Struct Health Monit
, vol.
18
, no.
1
,
2019
, doi: .
28.
ASTM International
, “
Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
,”
2012
.
29.
J. M.
Ndambi
et al, “
Modal testing as a tool for non-destructive testing of concrete structures
,” in
Emerging Technologies in NDT
,
2021
. doi: .
30.
P.
Lehner
and
K.
Hrabová
, “
Relationship of Time-Dependent Parameters from Destructive and Non-Destructive Tests of Structural Concrete
,”
Mathematics
, vol.
10
, no.
3
,
2022
, doi: .
31.
S. K.
Verma
,
S. S.
Bhadauria
, and
S.
Akhtar
, “
Review of Nondestructive Testing Methods for Condition Monitoring of Concrete Structures
,”
Journal of Construction Engineering
, vol.
2013
, p.
834572
,
2013
, doi: .
This content is only available via PDF.
You do not currently have access to this content.