The experimental research investigation is carried out to study the flexure behavior of beams with the replacement of shape memory alloy rebars (SMAs). The practical program included testing three beams to investigate the effects of the replacement of longitudinal steel rebar by shape memory alloy rebar on the flexure behavior of beams. The study was focused on determining ultimate load, maximum deflection, load-deflection behavior, failure mode, ductility of beams, flexural toughness, and crack pattern at failure. Experimentally, the flexure behavior beams are significantly affected by changing the number of reinforcing bars with shape memory alloys (SMA) longitudinal direction. However, for using two rebars and one rebar of shape memory alloy respectability as a replacement for steel longitudinal reinforcement, the increases in maximum deflection were 19.18% and 14.45% from the reference beam, the ultimate load decreased by 20% and 2.66% from the reference beam, the ductility increased by 56.771% and 19.049% from the reference beam.

1.
Duerig
,
T.W.
,
Melton
,
K.N.
,
Stöckel
,
D.
, and
Wayman
,
C.M.
(eds),
Engineering Aspects of Shape Memory Alloys
,
ButterworthHeinemann, Boston, MA
(
1990
).
2.
Otsuka
,
K.
, and
Wayman
,
C.M.
(eds),
Shape Memory Materials
,
Cambridge University Press
,
Cambridge, UK
(
1998
).
3.
Schwartz
,
M.
,
Encyclopedia of Smart Materials
, Volume
1
,
John Wiley and Sons
,
New York, NY
(
2002
).
4.
Otsuka
,
K.
, and
Ren
,
X.
, "
Physical Metallurgy of Ti-Ni-Based Shape Memory Alloys
,"
Progress in Materials Science
50
:
511
678
(
2005
).
5.
Alam
,
M.S.
,
Youssef
,
M.A.
, and
Nehdi
,
M.
2007
.
Utilizing Shape Memory Alloys to Enhance the Performance and Safety of Civil Infrastructure: a Review.
"
Canadian Journal of Civil Engineering
,
34
(
9), 1075-1086
.
6.
Janke
,
L.
,
Czaderski
,
C.
,
Motavalli
,
M.
, and
Ruth
,
J.
2005
.
Applications of Shape Memory Alloys in Civil Engineering Structures - Overview, Limits and New Ideas
.
Materials and Structures
,
338
(
279
),
578
592
.
7.
Saiidi
,
M.S.
,
Sadrossadat-Zadeh
,
M.
, Ayoub,C., and
Itani
,
A.
2007
.
Pilot study of behavior of concrete beams reinforced with shape memory alloys
.
Journal of Materials in Civil engineering, American Society of Civil Engineering
,
19
(
6
):
454
461
.
8.
Elbahy
Y.I.
,
Youssef
M.A.
,
Nehdi
M.
2009
.
Stress Block Parameters for Concrete Flexural Members Reinforced with Superelastic Shape Memory Alloys
.
Journal of Materials and Structures
,
42
(
10
),
1335
1351
.
9.
Indirli
M.
(
2000
), "
The demo-intervention of the ISTECH Project: the bell tower of S Giorgio in Trignano (Italy
),"
Proceedings of the Final Workshop of ISTECH Project - Shape Memory Alloy Devices for Seismic Protection of Cultural Heritage Strctures
, pp.
134
146
.
10.
Soroushian
P.
,
Ostowari
K.
,
Nossoni
A.
and
Chowdhury
H.
(
2001
), "
Repair and strengthening of concrete structures through appl ication of corrective posttensioning forces with shape memory alloys
",
Transp Res Rec
: pp.
20
6
.
11.
Youssef
,
M.A.
, and
Rahman
,
M.
2007
.
Simplified seismic modeling of reinforced concrete flexural members
.
Magazine of Concrete Research
,
59
(
9
),
639
649
.
12.
Abdulridha
,
A.
2013
.
Performance of Superelastic Shape Memory Alloy Reinforced Concrete Elements Subjected to Monotonic and Cyclic Loading
. PhD Thesis,
Department of Civil Engineering, University of Ottawa
,
Ottawa, Ontario, Canada
,
346
pp.
This content is only available via PDF.
You do not currently have access to this content.