Elastomeric materials are broadly used for damping augmentation in variety of applications due to their simple design, low weight density and high reliability and low tensile strength. Generally, the components of elastomers are manufactured in large quantity through injection moulding process. However, when required in small numbers for the specific applications such as aerospace, ship building, biomedical engineering etc and also 000when required in complex shapes and higher accuracy manufacturing elastomeric components through injection moulding process turns out to be an expensive process due to higher initial cost. Under those circumstances machining appears to be a promising process due to its versatility and accuracy. On the other hand machining Elastomers in normal circumstances is not so easy due to high elastic deformation that occurs in the entire workpiece during machining which results in poor product quality. Cryo-cooling assisted machining provide solution to this problem which is nothing but an extended quenching process in the conventional heat treatment cycle in which high elastic property disappears temporarily. The present paper aims at brief literature survey on recent developments in cryogenic machining of elastomers.

Topics
Elasticity, Machining, Materials forming, Materials properties, Polymers, Biomedical engineering, Review
1.
Lindqvist
,
J.
, &
Oestigaard
,
T.
 (
2013
).
Elastomers as a source of ecological and cultural innovation in the pre-Columbian Amazon
.
Journal of Social Archaeology
,
13
(
2
),
156
–
177
.
Google Scholar
 
2.
Wicks
,
Z. W.
,
Jones
,
F. N.
, &
Pappas
,
S. P.
 (
2012
). Organic coatings: science and technology.
John Wiley & Sons
.
Crossref
Search ADS
 
V. G.
Dhokia
,
S. T.
Newman
,
P.
Crabtree
, and
M. P.
Ansell
, “
Adiabatic shear band formation as a result of cryogenic CNC machining of elastomers
,” pp.
1482
–
1492
,
2011
, DOI:
https://doi.org/10.1177/0954405411415318
.
Google Scholar
Crossref
Search ADS
 
3.
Witten
,
T. A.
, &
Pincus
,
P. A.
 (
2003
).
Molecular theory of rubber elasticity
.
Reviews of Modern Physics
,
65
(
3
),
851
.
Google Scholar
 
4.
Flory
,
P. J.
 (
1953
).
Principles of polymer chemistry
(Vol.
35
).
Cornell University Press
.
Google Scholar
 
5.
Gent
,
A. N.
 (
2001
). A history of the science and technology of rubber in the UK. In
Science and Technology of Rubber
(pp.
1
–
50
).
Elsevier
.
Google Scholar
 
6.
M.
Putz
,
M.
Dix
,
M.
Neubert
,
G.
Schmidt
, and
R.
Wertheim
, “
Investigation of Turning Elastomers Assisted with Cryogenic Cooling
,”
Procedia CIRP
, Vol.
40
, pp.
631
–
636
,
2016
, DOI:
https://doi.org/10.1016/j.procir.2016.01.146
.
Google Scholar
Crossref
Search ADS
 
7.
M.
Putz
,
M.
Dix
,
M.
Neubert
, and
T.
Schmidt
, “
Mechanism of Cutting Elastomers with Cryogenic Cooling
,”
CIRP Ann. - Manuf. Technol.
, pp.
4
–
7
,
2016
, DOI:
https://doi.org/10.1016/j.cirp.2016.04.075
.
Google Scholar
 
8.
R.
Nayak
,
K.
State
, and
R.
Shetty
, “
Impact Of Process Parameters On Cutting Forces In Rubber Machining
,” no.
January
, pp.
7
–
13
,
2017
.
Google Scholar
 
9.
R.
Nayak
, “
Influence Of Liquid Nitrogen Cooling On The End Milling Of Elastomers,”
2015
.
Google Scholar
 
10.
Atkinson
,
R.
 (
2012
).
Rubber in aerospace: Past, present, and future
.
Rubber Chemistry and Technology
,
85
(
1
),
1
–
12
.
https://doi.org/10.5254/1.3672114
Google Scholar
Crossref
Search ADS
 
11.
Ratner
,
B. D.
, &
Bryant
,
S. J.
 (Eds.). (
2004
).
Biomaterials: Medical devices and tissue engineering
.
Springer
.
Google Scholar
 
18.
G. H. M.
Huitema
, “
Polymer Science and Technology
,” 2nd ed.,
Wiley
,
2000
.
Google Scholar
 
19.
D. R.
Paul
 and
L. M.
Robeson
, “
Polymer nanotechnology: Nanocomposites
,”
Polymer
, Vol.
49
, no.
15
, pp.
3187
–
3204
,
2008
.
https://doi.org/10.1016/j.polymer.2008.04.017
Google Scholar
Crossref
Search ADS
 
20.
C. A.
Rogers
 and
J. A.
Nairn
, “
Elasticity, viscoelasticity, and deformation of elastomers
,”
Rubber Chem. Technol.
, Vol.
73
, no.
3
, pp.
504
–
523
,
2000
.
https://doi.org/10.5254/1.3547602
Google Scholar
Crossref
Search ADS
 
21.
Y. P.
Handa
, “Thermal conductivity of polymers,” in
Polymer Handbook
, 4th ed.,
J.
Brandrup
 and
E. H.
Immergut
, Eds.
New York
:
Wiley
,
2003
, pp.
537
–
551
.
Google Scholar
 
22.
R. W.
Ogden
 and
E. R.
Roxburgh
, ”
Theory of viscoelasticity
,” 2nd ed.,
Dover Publications
,
1999
.
Google Scholar
 
23.
S. S.
Latour
 and
A. J.
Crosby
, “
Stress-strain behavior of elastomers
,”
Macromolecules
, Vol.
49
, no.
19
, pp.
7288
–
7297
,
2016
.
Google Scholar
 
24.
M.
Hess
 and
M. P.
Tschopp
, “Glass transition temperature of polymers,” in
Polymer Handbook
, 4th ed.,
J.
Brandrup
 and
E. H.
Immergut
, Eds.
New York
:
Wiley
,
2003
, pp.
17
–
28
.
Google Scholar
 
25.
J. F. V.
Vincent
 and
J. R.
Stauffer
, “
The measurement of hardness and modulus in elastomers
,”
Polymer Testing
, Vol.
7
, no.
5
, pp.
355
–
369
,
1987
.
https://doi.org/10.1016/0142-9418(87)90015-8
Google Scholar
Crossref
Search ADS
 
26.
K.A.
Grosch
, “
The relation between the fricition and visco-elastic properties of rubber
,”
R. Soc. london
, pp.
21
–
39
,
1962
.
Google Scholar
 
27.
Kulkarni
,
P. B.
, et al. “
A review on machining of natural rubber
.”
Journal of Manufacturing Processes
25
(
2017
):
150
–
169
.
Google Scholar
 
28.
Senthil Kumar
,
R.
, et al. “
Analysis and optimization of machining parameters for turning of natural rubber using response surface methodology
.”
Measurement
135
(
2019
):
172
–
181
.
Google Scholar
 
29.
Li
,
F.
, et al. “
Investigation on machinability of styrene-butadiene rubber using milling
.”
Procedia CIRP
26
(
2015
):
471
–
476
.
Google Scholar
 
30.
Song
,
Q.
, et al. “
Study on turning of styrene butadiene rubber
.”
Advanced Materials Research
150-151
(
2011
):
1709
–
1713
.
Google Scholar
 
31.
Zhang
,
X.
, et al. “
Effects of machining parameters on surface quality and residual stress in milling of nitrile butadiene rubber
.”
Journal of Manufacturing Processes
37
(
2019
):
399
–
411
.
Google Scholar
 
32.
Liu
,
J.
, et al. “
Machining performance and surface quality in milling of nitrile-butadiene rubber
.”
Journal of Materials Processing Technology
211
(
2011
):
1191
–
1196
.
https://doi.org/10.1016/j.jmatprotec.2011.01.024
Google Scholar
Crossref
Search ADS
 
33.
Attanasio
,
A.
, et al. “
Turning and drilling of polyurethane: process optimization and surface integrity
.”
Procedia Manufacturing
15
(
2018
):
32
–
39
.
Google Scholar
 
34.
Kuo
,
C. H.
, et al. “
Machinability study of polyurethane elastomer
.”
The International Journal of Advanced Manufacturing Technology
62
(
2012
):
1137
–
1145
.
Google Scholar
 
35.
Bouchaala
,
S.
, et al. “
Investigation of machining parameters effect on surface quality and burr formation of silicone rubber in drilling operation
.”
The International Journal of Advanced Manufacturing Technology
95
(
2018
):
2281
–
2292
.
https://doi.org/10.1007/s00170-017-1345-3
Google Scholar
Crossref
Search ADS
 
36.
Colakoglu
,
A. E.
, et al. “
A comparative study on drilling of rubber materials
.”
The International Journal of Advanced Manufacturing Technology
68
(
2013
):
1033
–
1046
.
Google Scholar
 
37.
Wang
,
J.
, et al. “
Cutting performance of fluorocarbon rubber and cutting force prediction based on mechanics of cutting process
.”
Journal of Manufacturing Processes
36
(
2018
):
144
–
152
.
Google Scholar
 
38.
Sun
,
S. J.
, et al. “
Study on machining performance and cutting mechanism of fluororubber
.”
Procedia CIRP
5
(
2013
):
82
–
86
.
Google Scholar
 
39.
Zhang
,
Y.
, et al. “
Experimental study on machining of EPDM rubber using a novel magnetorheological finishing method
.”
The International Journal of Advanced Manufacturing Technology
93
(
2017
):
2673
–
2683
.
Google Scholar
 
40.
Kuo
,
C. H.
, et al. “
The influence of machining conditions on surface roughness and surface damage of EPDM rubber
.”
Journal of Materials Processing Technology
210
(
2010
):
1481
–
1488
.
Google Scholar
 
41.
Jhavar
,
S.
, et al. “
Effect of machining parameters on surface roughness, tool wear and chip formation during drilling of neoprene rubber
.”
Materials and Manufacturing Processes
32
(
2017
):
710
–
718
.
Google Scholar
 
42.
Mirzaei
,
M.
, et al. “
Investigation of machinability in drilling process of neoprene rubber using response surface methodology
.”
Measurement
147
(
2019
):
444
–
452
.
Google Scholar
 
43.
Bhattacharya
,
S.
, et al. “
Performance evaluation of cutting tool materials in turning of isobutylene-isoprene rubber using response surface methodology
.”
Journal of Manufacturing Processes
18
44.
Zhang
,
X.
, et al. “
Analysis of cutting temperature and chip formation during machining of hydrogenated nitrile rubber
.”
Journal of Manufacturing Processes
48
(
2020
):
17
–
27
.
Google Scholar
 
45.
Kaldas
,
S. R.
, et al. “
Investigation of the machining performance of hydrogenated nitrile butadiene rubber
.”
International Journal of Machine Tools and Manufacture
115
(
2017
):
29
–
43
.
https://doi.org/10.1016/j.ijmachtools.2016.11.006
Google Scholar
Crossref
Search ADS
 
46.
Saber
,
M. A.
, et al. “
Optimization of process parameters during turning of acrylonitrile butadiene rubber using response surface methodology
.”
Journal of Manufacturing Processes
45
(
2019
):
106
–
116
.
Google Scholar
 
47.
Wang
,
X.
, et al. (
2017
).
A Review on Cryogenic Cooling in Machining Processes
.
International Journal of Machine Tools and Manufacture
,
122
,
69
–
100
.
Google Scholar
 
48.
Fadel
,
T.
, et al. (
2010
).
Cryogenic Machining of Titanium Alloys: A Review
.
International Journal of Machine Tools and Manufacture
,
50
(
12
),
879
–
924
.
Google Scholar
 
49.
Zhang
,
X.
, et al. (
2019
).
Effect of Cryogenic Cooling on Machinability of Ti-6Al-4V Alloy
.
International Journal of Advanced Manufacturing Technology
,
101
(
1-4
),
99
–
112
.
https://doi.org/10.1007/s00170-018-2932-7
Google Scholar
Crossref
Search ADS
 
50.
Rahman
,
M.
, et al. (
2013
).
Cryogenic Cooling in Machining: A Review
.
International Journal of Machine Tools and Manufacture
,
66
,
1
–
16
.
https://doi.org/10.1016/j.ijmachtools.2012.11.002
Google Scholar
Crossref
Search ADS
 
51.
Kapoor
,
S.
, et al. (
2011
).
Cryogenic Machining of Difficult-to-Cut Materials: A Review
.
International Journal of Machine Tools and Manufacture
,
51
(
8
),
579
–
598
.
Google Scholar
 
52.
Brinksmeier
,
E.
, et al. (
2004
).
Application of Cryogenic Cooling for Sustainable Manufacturing
.
CIRP Annals
,
53
(
2
),
587
–
609
.
https://doi.org/10.1016/S0007-8506(07)60035-3
Google Scholar
Crossref
Search ADS
 
53.
Pusavec
,
F.
, et al. (
2010
).
Experimental Investigation of Tool Wear and Cutting Forces in Cryogenic Machining of Ti-6Al-4V
.
Journal of Materials Processing Technology
,
210
(
1
),
59
–
67
.
Google Scholar
 
54.
Ibrahim
,
N.A.
MohdAffendi
, and
M.R.
Muhamad
, “
Investigation of Machining Parameters in Turning Nitrile Rubber Using PCD Tool under Dry Condition
,”
Journal of Advanced Manufacturing Technology
, Vol.
14
, no.
1
, pp.
57
–
69
,
2020
.
Google Scholar
 
55.
M.
Salami
,
S.M.
Razavi
,
A.
Bidi
, and
S.
Kheirandish
, “
Experimental Investigation of Cryogenic Turning of Nitrile Butadiene Rubber (NBR) Using CBN Cutting Tool
,”
The International Journal of Advanced Manufacturing Technology
, Vol.
96
, no.
1-4
, pp.
571
–
581
,
2018
.
Google Scholar
 
56.
A. R. F.
Muhammad
,
S. M.
Sapuan
, and
M.
Ishak
, “
Machinability Study of Silicone Rubber Using Single Point Cutting Tool
,”
Materials Science Forum
, Vol.
917
, pp.
3
–
9
,
2018
.
https://doi.org/10.4028/www.scientific.net/MSF.917.3
Google Scholar
Crossref
Search ADS
 
57.
J. O.
Agunsoye
,
S. I.
Shaibu
, and
B. I.
Oderinde
, “
Performance of Cryogenic Turning of Silicone Rubber Using CBN Cutting Tool
,”
Heliyon
, Vol.
6
, no.
2
,
e03381
,
2020
.
https://doi.org/10.1016/j.heliyon.2020.e03381
Google Scholar
Crossref
Search ADS
PubMed
 
58.
I. M. M.
Awang
,
H. M.
Nadzri
,
R. A.
Bakar
, and
S. K.
Kamaruddin
, “
Investigation of the Machinability of EPDM Rubber in Dry Turning Operation
,”
Journal of Mechanical Engineering and Sciences
, Vol.
12
, no.
2
, pp.
3587
–
3596
,
2018
.
Google Scholar
 
59.
M.
Salami
,
S. M.
Razavi
,
A.
Bidi
, and
S.
Kheirandish
, “
Optimization of Machining Parameters in Cryogenic Turning of Ethylene Propylene Diene Monomer Rubber Using CBN Cutting Tool
,”
The International Journal of Advanced Manufacturing Technology
, Vol.
101
, no.
1-4
, pp.
211
–
222
,
2019
.
Google Scholar
 
60.
A.R. F.
Muhammad
,
S. M.
Sapuan
, and
M.
Ishak
, “
Machining Characteristics of Natural Rubber Using Single Point Cutting Tool
,”
Procedia Manufacturing
, Vol.
35
, pp.
823
–
828
,
2019
.
Google Scholar
 
61.
S. S. P.
Kumar
,
P.
Srinivasan
,
S. S. R. K.
Sastry
, and
S. K.
Patel
, “
Investigation on Cryogenic Turning of Natural Rubber Using Carbide Insert
,”
Materials Today: Proceedings
, Vol.
5
, no.
2
, pp.
4376
–
4385
,
2018
.
Google Scholar
 
62.
I.
Ibrahim
,
M. Z.
Omar
,
M. R.
Muhamad
, and
N. A.
MohdAffendi
, “
Investigation of Machinability and Surface Integrity of Fluoroelastomer Using Polycrystalline Diamond Tool under Dry Turning Condition
,”
Journal of Advanced Manufacturing Technology
, Vol.
13
, no.
1
, pp.
87
–
99
,
2019
.
Google Scholar
 
63.
M.
Salami
,
S. M.
Razavi
,
A.
Bidi
, and
S.
Kheirandish
, “
Investigation of Machinability Characteristics of Fluoro Rubber in Cryogenic Turning Process
,”
The International Journal of Advanced Manufacturing Technology
, Vol.
99
, no.
1-4
, pp.
203
–
213
,
2018
.
Google Scholar
 
64.
Wang
,
X.
, et al. (
2017
).
A Review on Cryogenic Cooling in Machining Processes
.
International Journal of Machine Tools and Manufacture
,
122
,
69
–
100
.
Google Scholar
 
65.
Fadel
,
T.
, et al. (
2010
).
Cryogenic Machining of Titanium Alloys: A Review
.
International Journal of Machine Tools and Manufacture
,
50
(
12
),
879
–
924
.
Google Scholar
 
66.
Zhang
,
X.
, et al. (
2019
).
Effect of Cryogenic Cooling on Machinability of Ti-6Al-4V Alloy
.
International Journal of Advanced Manufacturing Technology
,
101
(
1-4
),
99
–
112
.
https://doi.org/10.1007/s00170-018-2932-7
Google Scholar
Crossref
Search ADS
 
67.
Rahman
,
M.
, et al. (
2013
).
Cryogenic Cooling in Machining: A Review
.
International Journal of Machine Tools and Manufacture
,
66
,
1
–
16
.
https://doi.org/10.1016/j.ijmachtools.2012.11.002
Google Scholar
Crossref
Search ADS
 
68.
Kapoor
,
S.
, et al. (
2011
).
Cryogenic Machining of Difficult-to-Cut Materials: A Review
.
International Journal of Machine Tools and Manufacture
,
51
(
8
),
579
–
598
.
Google Scholar
 
69.
Brinksmeier
,
E.
, et al. (
2004
).
Application of Cryogenic Cooling for Sustainable Manufacturing
.
CIRP Annals
,
53
(
2
),
587
–
609
.
https://doi.org/10.1016/S0007-8506(07)60035-3
Google Scholar
Crossref
Search ADS
 
70.
Pusavec
,
F.
, et al. (
2010
).
Experimental Investigation of Tool Wear and Cutting Forces in Cryogenic Machining of Ti-6Al-4V
.
Journal of Materials Processing Technology
,
210
(
1
),
59
–
67
Google Scholar
 
71.
Sahoo
,
P.
,
Kumar
,
A. S.
, &
Islam
,
S.
 (
2014
).
Analysis of cutting forces and surface roughness in cryogenic machining of elastomers
.
Journal of Manufacturing Processes
,
16
(
4
),
521
–
529
.
Google Scholar
 
72.
Ferreira
,
A. J.
,
Diniz
,
A. E.
,
&Filho
,
J. R.
 (
2012
).
Cryogenic turning of rubber-like materials
.
Journal of Materials Processing Technology
,
212
(
1
),
189
–
195
.
Google Scholar
 
73.
Park
,
S.
, &
Lee
,
D. G.
 (
2015
).
Analysis of frictional force during cryogenic machining of rubber materials
.
Journal of Mechanical Science and Technology
,
29
(
10
),
4207
–
4212
.
Google Scholar
 
74.
Chen
,
J.
,
Li
,
X.
, &
Li
,
L.
 (
2016
).
Effects of cryogenic cooling on cutting forces, friction coefficient, and surface quality in the turning of natural rubber
.
International Journal of Advanced Manufacturing Technology
,
86
(
9-12
),
2773
–
2783
.
Google Scholar
 
75.
Ferreira
,
A. J.
, &
Filho
,
J. R.
 (
2011
).
Cutting forces and friction coefficient in cryogenic turning of elastomers
.
International Journal of Advanced Manufacturing Technology
,
52
(
9-12
),
961
–
970
.
Google Scholar
 
76.
Liu
S. N.
 (
2011
).
Effect of cryogenic cooling on cutting forces and surface quality in turning of elastomers
.
CIRP Annals
,
60
(
1
),
53
–
56
.
https://doi.org/10.1016/j.cirp.2011.03.002
Google Scholar
Crossref
Search ADS
 
77.
Ferreira
,
A. J.
,
Diniz
,
A. E.
, &
Filho
,
J. R.
 (
2012
).
Cryogenic turning of rubber-like materials
.
Journal of Materials Processing Technology
,
212
(
1
),
189
–
195
.
Google Scholar
 
78.
Jain
,
P. K.
,
Jain
,
V. K.
, &
Jain
,
N. K.
 (
2014
).
Experimental investigation of cryogenic cooling in turning of elastomer using vegetable oil based cutting fluid
.
Journal of Materials Research and Technology
,
3
(
2
),
103
–
108
.
Google Scholar
 
79.
Shrestha
,
S.
, &
Liu
,
X.
 (
2015
).
Analysis of cutting forces in cryogenic machining of elastomers
.
International Journal of Machine Tools and Manufacture
,
96
,
85
–
96
.
Google Scholar
 
80.
Alaswad
,
A.
,
Sanaei
,
R.
,
Sadat
,
A.
, &
Youssef
,
H.
 (
2019
).
Experimental investigation of cutting forces during cryogenic machining of natural rubber
.
International Journal of Advanced Manufacturing Technology
,
102
(
5-8
),
2151
–
2161
.
Google Scholar
 
81.
Cheng
,
K.
, &
Zhang
,
L. C.
 (
2014
).
A study of cutting forces and surface roughness in cryogenic machining of elastomers
.
International Journal of Advanced Manufacturing Technology
,
73
(
9-12
),
1283
–
1293
.
Google Scholar
 
82.
Sood
,
P. K.
,
Mohan
,
R.
, &
Davim
,
J. P.
 (
2014
).
Analysis of heat-affected zone in cryogenic machining of elastomers
.
Materials and Manufacturing Processes
,
29
(
8
),
902
–
910
.
Google Scholar
 
83.
Ding
,
H.
,
Zhang
,
Z.
,
Wang
,
X.
,
Zhang
,
C.
, &
Hu
,
S.
 (
2021
).
Thermal deformation and heat-affected zone of cryogenic machining of rubber
.
International Journal of Advanced Manufacturing Technology
,
114
(
1-2
),
269
–
278
.
Google Scholar
 
84.
Mishra
,
V.
,
Dhote
,
A. G.
,
&Pande
,
S. S.
 (
2015
).
A comparative study on the effect of dry and cryogenic milling on the surface properties of natural rubber
.
Journal of Materials Processing Technology
,
216
,
236
–
244
.
Google Scholar
 
85.
materials with liquid nitrogen
.
Journal of Materials Processing Technology
,
264
,
168
–
177
.
86.
Liu
,
Z.
,
Li
,
Y.
,
Cai
,
G.
, &
Cheng
,
K.
 (
2021
).
Experimental study on the effect of ultra-cold cooling in milling deformation and surface properties of rubber
.
Journal of Materials Research and Technology
,
14
,
932
–
947
.
Google Scholar
 
87.
Islam
,
S.
,
Sahoo
,
P.
,
Kumar
,
A. S.
, &
Bhowmik
,
P.
 (
2014
).
Analysis of heat affected zone during cryogenic turning of elastomers
.
International Journal of Machine Tools and Manufacture
,
85
,
1
–
8
.
https://doi.org/10.1016/j.ijmachtools.2014.04.008
Google Scholar
Crossref
Search ADS
 
88.
Debnath
,
S.
,
Konneh
,
M.
,
Wabner
,
M.
, &
Scherge
,
M.
 (
2013
).
Cutting performance and chip formation during cryogenic machining of elastomers
.
Journal of Materials Processing Technology
,
213
(
2
),
344
–
352
.
Google Scholar
 
89.
E.
Breidenstein
, B., &
Tönshoff
,
H. K.
 (
2007
).
The role of cryogenic cooling in the machining of elastomers
.
Journal of materials processing technology
,
183
(
2-3
),
251
–
255
.
Google Scholar
 
90.
Abrao
,
A. M.
,
Paulo Davim
,
J.
, &
Reis
,
P.
 (
2007
).
The application of cryogenic cooling in the machining of elastomers
.
ournal of Materials Processing Technology
,
192
,
287
–
291
.
Google Scholar
 
91.
Hassanein
,
A. M.
,
Saad
,
A. S.
, &
El-Taweel
,
T. A.
 (
2017
).
The effects of cryogenic cooling on machining of different elastomers
.
Journal of Manufacturing Processes
,
29
,
143
–
151
.
Google Scholar
 
92.
Uhlmann
,
E.
,
Breidenstein
,
B.
, &
Tönshoff
,
H. K.
 (
2007
).
The role of cryogenic cooling in the machining of elastomers
.
Journal of materials processing technology
,
183
(
2-3
),
251
–
255
.
Google Scholar
 
This content is only available via PDF.
©2024 Authors. Published by AIP Publishing.
2024
Author(s)
You do not currently have access to this content.