This paper deals with the initial design and realization of a laboratory sample of a birefringent material-based stress sensor. A cube-like sample of commercial polycarbonate (PC) with a volume of approx. 1cm3 is used as an active medium providing information on the applied stress. The sensor uses the stress-induced birefringence of the PC sample for measuring the applied stress. The proposed sensor is calibrated by a commercial weighing element. The utilization of the element allows the conversion of the unknown applied load into a known mechanical stress value according to the known size of the sensing area. In the paper, we report the result of the calibration routine of the sensor sample and discuss the possible application areas.
REFERENCES
1.
M.
Sobczyk
, S.
Wiesenhütter
, J. R.
Noennig
and T.
Wallmersperger
, J. Intell. Mater. Syst. Struct.
33
(3
), 379
–399
(2021
).2.
A.
Aman
, S.
Majcherek
, M.-P.
Schmidt
and S.
Hirsch
, Procedia Eng.
87
, 124
–127
(2014
).3.
4.
5.
Y.
Duan
, Sh.
He
, J.
Wu
, B.
Su
and Y.
Wang
, Nanomaterials
12
, 2495
(2022
).6.
Y.
Zhang
et al, Nature Communications
13
:1317
(2022
).7.
K.
Zhang
, Zh.
Wang
, Y.
Liu
, H.
Zhao
, Ch.
Gao
and Y.
Wu
, Chinese J. Polym. Sci.
40
, 384
–393
(2022
).8.
N.
Turdakyn
, A.
Medeubayev
, I.
Abay
, D.
Adair
and G.
Kalimuldina
, Materials Today: Proceedings
49
, 2478
–2481
(2022
).9.
Sh.
Xiang
, Sh.
Chen
, M.
Yao
, F.
Zheng
and Q.
Lu
, J. Mater. Chem. C
7
, 9625
–9632
(2019
).10.
J.
Bydžovský
, L.
Kraus
, P.
Švec
, M.
Pasquale
and M.
Kollár
, Sens. Actuator A Phys.
110
, 82
–86
(2004
).11.
H.
Wang
, X.
Yu
, X.
Tang
, Y.
Sun
, X.
Zeng
and L.
Lin
, Cellulose
29
:341
–354
(2022
).12.
J.
Qiu
, M. K.
Idris
, G.
Grau
and G. W.
Melenka
, Composites Part B
238
, 109893
(2022
).13.
Y.
Zhuang
and R.-J.
Xie
, Adv. Mater.
33
, 2005925
(2021
).14.
M.
Born
and E.
Wolf
, “Optics of Crystals,” in Principles of Optics
, (Cambridge University Press
, Cambridge
, 2003
), pp. 823
–825
.15.
N.
Tarjányi
, M.
Uhríčik
, D.
Káčik
and P.
Palček
, “Photoelastic Birefringence of Polycarbonate as a Basis for Optical Sensors of Load
,” in Applied Physics of Condensed Matter-2018
, AIP Conference Proceedings 1996
, edited by J.
Sitek
et al, (AIP Publishing
, Melville, NY
, 2018
), pp. 020048
-1
–020048-7.16.
N.
Tarjányi
, M.
Uhríčik
, D.
Káčik
and P.
Palček
, “Photoelastic Response of Polycarbonate in NIR,” in Applied Physics of Condensed Matter-2019
, AIP Conference Proceedings 2131
, edited by J.
Sitek
et al, (AIP Publishing
, Melville, NY
, 2019
), pp. 020046
-1
–020046-5.
This content is only available via PDF.
©2024 Authors. Published by AIP Publishing.
2024
Author(s)
You do not currently have access to this content.