The selection of the optimal control method of locomotives on the railways of Uzbekistan is aimed at reducing fuel resources and locomotive movement time. The procedure for efficient control of locomotives moving in the direction of the Tinchlik-Nurota railway section is shown, and examples of calculating the effective movement of the locomotive at specified points of the Tinchlik-Nurota section are given. Improvement of transportation works in locomotives has been carried out to achieve economic efficiency in a certain volume, and it has been shown that by choosing the optimal control mode of locomotives, it is possible to achieve the standard time consumption without any difficulties. Improved control modes and gradation of properly selected positions in the locomotive control mode were proposed, and due to this, a significant reduction in the fuel consumption time mode was seen. The calculations carried out on the selection of improved management, improvement of the mode of operation on all road profiles and reduction of service time of locomotives, work on normalization of fuel consumption of the railways of Uzbekistan, will make it possible to achieve national economic efficiency.
REFERENCES
1.
Ablyalimov
, O.S.
, To the calculation of the travel time of the train along the hauls of the railway section, Universum: technical sciences: electron
. scientific magazine
, 2020
; 10
(79
): 88
–90
. DOI: .2.
Ablyalimov
, O.S.
, Optimization of locomotive work of locomotives: questions of theory, methods, calculations, results, Monograph, Complex Print Publishing House
, 2020
; 488
p.3.
Rules for traction calculations for train work, All-Union Scientific Research Institute of Railway Locomotive. Moscow, Lokomotiv
, 1985
; 287
p.4.
Kasimov
, O. T.
, Dzhanikulov
, A. T.
, & Mamayev
, S. I.
Modeling the bending of the tire surface by pads during braking
. In AIP Conference Proceedings
, 2021
; 2402
(1
): 070030
. 5.
Dzhanikulov
, A. T.
, Mamayev
, S. I.
, & Kasimov
, O. T.
Modeling of rotational oscillations in a diesel locomotive wheel-motor block
. In Journal of Physics: Conference Series
, 2021
;1889
(2
): 022017
.6.
Kasimov
, O.
, Faizibayev
, S.
, Dzhanikulov
, A.
, & Mamayev
, S.
, Numerical studies for estimation of temperature fields in bandage material during locomotive braking
. In AIP Conference Proceedings
, 2022
; 2432
(1
): 030025
7.
Valiev
, M.
, & Kosimov
, K.
Diagnosing the technical condition of the diesel cylinder-piston group
. In E3S Web of Conferences
, 2021
; 264
: 04061
.8.
Yusupov
, D. T.
, Kutbidinov
, O. M.
, Samadov
, S. A.
, & Abdullaev
, E. S.
Investigation of winding faults of traction transformers
. In IOP Conference Series: Earth and Environmental Science
, 2021
; 868
(1
): 012026
.9.
Ablyalimov
, O.
, Khamidov
, O.
, & Domanov
, K.
Determination of Locomotive Traction Efficiency on the Section of Marokand-Kattakurgan of Uzbek Railway
. In Networked Control Systems for Connected and Automated Vehicles
, 2022
; 1
: 671
–680
.10.
Khamidov
, O.
, & Udalova
, D.
Technical and Economic Efficiency of Intelligent Data Analysis on the Railways of the Republic of Uzbekistan
. In International Scientific Siberian Locomotive Forum TransSiberia-2021
, 2022
; 1
: 230
–239
.11.
Khamidov
, O. R.
, & Grishchenko
, A. V.
Locomotive asynchronous traction motor rolling bearing fault detection based on current intelligent methods
. In Journal of Physics: Conference Series
, 2021
; 2131
(4
): 042084
.12.
Ablyalimov
, O.
, Petrochenko
, S.
, & Kodirov
, N.
(2022
). Analyzing the Movement of a Freight Train at Stops on Flat Sections of the Railway. In Networked Control Systems for Connected and Automated Vehicles
: Volume 2 (pp. p165-171
). Cham
: Springer International Publishing
.13.
Petrochenko
, S.
, Ablyalimov
, O.
, Kodirov
, N.
, & Rakhmaev
, R.
Determining Effective Electrical Discharge Machining Modes for the Disc Tab Grooves of Small-Size By-Passengine
. In Networked Control Systems for Connected and Automated Vehicles
, 2022
; 2
: 261
–269
.14.
Khamidov
, O.
, Yusufov
, A.
, Jamilov
, S.
, & Kudratov
, S.
Remaining life of main frame and extension of service life of shunting locomotives on railways of the Republic of Uzbekistan
. In E3S Web of Conferences
, 2023
; 365
: 05008
.15.
Ablyalimov
, O.S.
, On solving the problem of optimizing the transportation work of locomotives, Universum: technical sciences: electron
. scientific magazine
, 2020
; 9
(78
): 27
–29
. DOI: .16.
Ablyalimov
, O.S.
, Substantiation of the method for solving the problem of optimizing the transportation work of locomotives, Universum: technical sciences: electron
. scientific magazine
, 2020
; 9
(78
): 30
–34
. DOI: .17.
Ablyalimov
, O.S.
, Indicators of the efficiency of the use of locomotives in operating conditions [Text] //
Universum: technical sciences: electron. scientific magazine
, 2020
; 9
(78
): 35
–39
. DOI: .18.
Ablyalimov
, O.S.
, Justification of the gain parameter in the problems of optimizing the transportation work of locomotives, Universum: technical sciences: electron
. scientific magazine
, 2020
; 9
(78
): 91
–94
. DOI: .19.
Ablyalimov
, O. S.
, Efficiency of methods for normalizing energy consumption for train traction, Tr. TashIIT, Tashkent in-t. eng
. railway transport, Tashkent
, 1974
; 105
: 27
–35
.20.
Tolkachev
, A. V.
Calculations of energy consumption norms for the transportation work of locomotives by the method of dismemberment, Tr. TashIIT, Tashkent in-t. eng
. railway transport, Tashkent
, 1973
; 100
: 43
–54
.21.
Tolkachev
, A. V.
Study of the possibilities of reducing the fuel consumption of diesel locomotives for train traction due to optimal modes of driving trains on the SAZ railway
, Scientific and technical report of TashIIT, VNITC No. 79028894, inv. No. B836191, Tashkent in-t. eng. railway transp., Moscow
, 1979
; 67
p.22.
Rustamov
, K.
, Komilov
, S.
, Kudaybergenov
, M.
, Shermatov
, S.
, & Xudoyqulov
, S.
Experimental study of hydraulic equipment operation process
. In E3S Web of Conferences,
2021
; 264
: 02026
, EDP Sciences.23.
Rustamov
K.J.
Technical solutions and experiment to create a multipurpose machine
. International Journal of Scientific and Technology Research
, 2020
; 9
(3
): 2007
–2013
24.
Askarhodjaev
, T.
, Rustamov
, K.
, Aymatova
, F.
, & Husenova
, G.
Justification of the hydraulic system parameters of the excavation body of a multi-purpose road construction vehicle based on the TTZ tractor
. Journal of Critical Reviews
, 2020
; 7
(5
), .25.
Isyanov
, R.
, Rustamov
, K.
, Rustamova
, N.
, & Sharifhodjaeva
, H.
Formation of ICT competence of future teachers in the classes of general physics
. Journal of Critical Reviews
, 2020
; 7
(5
): 235
–239
.26.
Rustamova
, N. R.
Development of technology based on vitagenic experience using media resources in higher educational institutions students teaching
. International Journal of Scientific and Technology Research
, 2020
; 9
(4
): 2258
–2262
.
This content is only available via PDF.
©2024 Authors. Published by AIP Publishing.
2024
Author(s)
You do not currently have access to this content.
