In this article, holes with circular cross-sections are calculated on vibration and noise with a practical pilot test; Where the number of holes 7 in the gears of identical dimensions regardless of lubrication, as the diameter of the holes is 24 mm and the distance is 50 mm and 43 mm from the center of rotation, to validate the results, it was applied in a very concrete way. The results were compared with theoretical values. It is worth noting that multiple instances and speeds were taken by applying a stable load to the system.

1.
S.
Oda
,
K.
Miyachika
, and
T.
Sayama
,
“Effects Of Rim and Web Thicknesses on Bending Fatigue Strength of Internal Gear”, Bulletin of JSME, 1986 Volume 29 Issue 248 Pages 586-592
2.
Yokota
,
T.
,
Taguchi
,
T.
,
Mitsuo
,
G. A.
Solution Method for Optimal Weight Design Problem of the Gear Using Genetic
Algorithms, Computers ind. Engng
Vol.
35
, Nos
3-4
, pp.
523
526
,
1998
.
3.
J. D.
Smith
, “Gear Noise and Vibration”, 2nd edition - Revised and Expanded, pp. 8,
Marcel Dekker, Inc
,
2003
.
4.
M. P.
Norton
and
D. G.
Karczub
, “Fundamentals of Noise and Vibration Analysis for Engineers”, 2nd edition, pp.
514
515
,
Cambridge University Press
,
New York
,
2003
.
5.
Özek
,
F.
Optimum Ağırlıklı Düz Dişli Çark Tasarımı ve Gerilme Analizi
T.C. Firat Ünvers Tes Fenbl Mler Enst Tüsü
,
2007
.
6.
A. R.
Hassan
,
G.
Thanigaiyarasu
, and
V.
Ramamurti
, “
Effect of Natural Frequency and Rotational Speed on Dynamic Stress in Spur Gear
”,
World Academy of Science, Eng. Technol. J.
volume 2, 2008.
2
(
12
):
1310
1318
.
7.
H.
Dresig
and
F.
Holzweißig
, “Dynamics of Machinery - Theory and Applications”, pp.
225
,
Springer-Verlag Berlin Heidelberg
,
2010
.
8.
N. H.
Abu-Hamdeh
and
M. A.
Alharthy
A Study on the Influence of using Stress Relieving Feature on Reducing the Root Fillet Stress in Spur Gear
”,
ResearchGate, ISSN 2227-4588, Interlaken
,
Switzerland
, February,
2014
.
9.
T. V.
Sundararajamoorthy
and
N.
Shanmugam
, “
Machine Design
”,
Anuradha Agencies
, 9th Revised Edition, Reprint
2006
.
10.
K.
Gupta
,
N. K.
Jain
and
R.
Laubscher
, “Advanced Gear Manufacturing and finishing - Classical and Modern Processes”, pp.
39
,
Academic Press, Elsevier Inc
.,
2017
.
11.
Youness
Benaicha
,
A.
Mélot
, “
A decomposition method for the fast computation of the transmission error of gears with holes
”,
Preprint submitted on 19 May 2021.
12.
S.
Shweiki
,
A.
Palermo
, and
D.
Mundo
, “A Study on the Dynamic Behaviour of Lightweight Gears”,
Hindawi Publishing Corporation
, Article ID 7982170,
2017
.
This content is only available via PDF.
You do not currently have access to this content.