In this study, substrate electroplating thickness, gas temperature and stand-off distance have all been varied using Taguchi L 9 orthogonal array to deposit metal layer on electroplated 3D printed part. Surface roughness is used tomeasure the response parameter of the coatings that were created in this way. Process parameters were optimized using raw data through Analysis of Variances. The important process variables are, in increasing order of contribution, standoff distance, electroplating thickness and gas temperature of the powder particle.
REFERENCES
1.
H.
Assadi
, F.
Gartner
, T.
Stoltenhoff
, and H.
Kreye
, Bonding Mechanism in Cold Gas Spraying
, Acta Mater.
, 2003
, 51
, p 4379
–4394
2.
Sandhu
, H. S.
, Phull
, G. S.
, Anand
, U.
, Preet Singh
, J.
, & Gulati
, P.
(2021
). Deposition of Metallic Coating on Plastic Substrate Material Using Cold Spray. In Recent Trends in Engineering Design
(pp. 61
–70
). Springer
, Singapore
3.
F.
Gartner
, T.
Stoltenhoff
, T.
Schmidt
, and H.
Kreye
, The Cold Spray Process and Its Potential for Industrial Applications
, J. Therm. Spray Technol.
, 2006
, 15
, p 223
–232
4.
Sandhu
, H.S.
, Phull
, G.S.
, Saini
, M.S.
, Preet Singh
, J.I.
, Gulati
, P.
(2021
). A Review: Bio-compatible Thermal Spray Coating on Bio-implant. In: Parey
, A.
, Kumar
, R.
, Singh
, M.
(eds) Recent Trends in Engineering Design. Lecture Notes in Mechanical Engineering
. Springer
, Singapore
5.
M.
Grujicic
, J.R.
Saylor
, D.E.
Beasley
, W.S.
DeRosset
, and D.
Helfritch
, Computational Analysis of the Interfacial Bonding Between Feed-Powder Particles and the Substrate in the Cold-Gas Dynamic-Spray Process
, Appl. Surf. Sci.
, 2003
, 219
, p 211
–227
6.
M.
Grujicic
, C.L.
Zhao
, W.S.
DeRosset
, and D.
Helfritch
, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process
, Mater. Des.
, 2004
, 25
, p 681
–688
7.
V.K.
Champagne
, Ed., The CS Materials Deposition Process
, Woodhead Publishing Ltd
., Cambridge, England
, 2007
, ISBN10 18456918148.
Pattison
, J.
, Celotto
, S.
, Khan
, A.
, & O’Neill
, W.
, Standoff distance and bow shock phenomena in the Cold Spray process
. Surface and Coatings Technology
, 2008
, 202
(8
), 1443
–1454
.9.
Li
WY
, Li
CJ
. Optimization of spray conditions in cold spraying based on the numerical analysis of particle velocity
. T Nonferr Met Soc
2004
;14
(S2
):43
–8
10.
Jodoin
B.
Cold spray nozzle mach number limitation
. J Therm Spray Technol
2002
; 11
:496
–507
11.
Li
, W.-Y.
, Zhang
, C.
, Guo
, X. P.
, Zhang
, G.
, Liao
, H. L.
, Li
, C.-J.
, & Coddet
, C.
(2008
). Effect of standoff distance on coating deposition characteristics in cold spraying
. Materials & Design
, 29
(2
), 297
–304
.12.
M.W.
Lee
, J.J.
Park
, D.Y.
Kim
, S.S.
Yoon
, H.Y.
Kim
, S.C.
James
, S.
Chandra
, and T.
Coyle
, Numerical Studies on the Effects of Stagnation Pressure and Temperature on Supersonic Flow Characteristics in Cold Spray Applications
, J. Therm. Spray Technol.
, 2011
, 20
, p 1085
–1097
13.
S.
Li
, B.
Muddle
, M.
Jahedi
, and J.
Soria
, A Numerical Investigation of the Cold Spray Process Using Underexpanded and Overexpanded Jets
, J. Therm. Spray Technol.
, 2012
, 21
, p 108
–120
14.
A.
Sova
, S.
Klinkov
, V.
Kosarev
, N.
Ryashin
, I.
Smurov
, Surface and Coatings Technology
, 220
(2013
), p 98
–101
.15.
H.
Tabbara
, S.
Gu
, D.G.
McCartney
, T.S.
Price
, P.H.
Shipway
, Journal of Thermal Spray Technology
, 20
(2011
), p 608
–620
16.
E.
Irissou
, F.
Ilinca
, W.
Wong
, M.L.
Tremblay
, J.G.
Legoux
, S.
Yue
, International Thermal Spray Conference
, September 27 - 29
, 2011
17.
Faizan-Ur-Rab
, M.
; Zahiri
, S.H.
; Masood
, S.H.
; Phan
, T.D.
; Jahedi
, M.
; Nagarajah
, R.
(2016
). “Application of a holistic 3D model to estimate state of cold spray titanium particles
”. Materials & Design.
89: p
1227
–1241
18.
Rokni,
M.
Reza
et al “Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray
.” Journal of Thermal Spray Technology
26
(2017
): 1308
–1355
19.
Phull
GS
, Kumar
S
, Walia
RS
, Singh
H
, Singh
H
(2020
) Copper electroforming optimization for fused deposition modeling produced ABS components for indirect tooling applications
. J Adv Manuf Syst
19
:15
–29
Ning
XJ
, Jang
JH
, Kim
HJ
(2007
) Effects of powder properties on in-flight particle velocity and deposition process during low pressure cold spray process
. Appl Surf Sci
253
:7449
–7455
20.
Goyal
, T.
, Sidhu
, T. S.
, & Walia
, R. S.
(2013
). Characterisation and corrosion studies of cold sprayed copper coatings on ASTM B 435 alloy
. International Journal of Surface Science and Engineering
, 7
(4
), 295
21.
Thakur
, I.S.
, Pandey
, V.
, Rao
, P.
, Tyagi
, S.V.
, & Goyal
, D.
(2020
). Tribological study of mechanically milled graphite nanoparticles codeposited in electroless Ni-P coatings
. Metal Powder Report
, 75
, 344
–349
This content is only available via PDF.
©2024 Authors. Published by AIP Publishing.
2024
Author(s)
You do not currently have access to this content.
