In renewable energy technologies, a significant contribution and steady growth is demonstrated by polymeric materials, in particular in the development of solar energy. Their potential applications are associated with the entire spectrum of renewable energy sources (wind, water, solar energy and bioenergy). Usage of PM leads to preserving natural resources and does not harm the environment. The contribution of non-traditional renewable energy sources to the global energy balance in the future is estimated from 1-2% to 10%, although today there are countries where the share of these sources exceeds half of the national energy balance. The physical and chemical properties of polymeric materials in solid, viscous, glassy states (plastics, rubber, fibers) have found their application in various industries and energy. The development of composite materials based on them with specified properties is a highly efficient and economical solution (rubber, sealants and adhesives, paints and varnishes, foam plastics and honeycomb plastics, thermoplastics, thermoplastics, etc.). Thus, article makes an emphasis on the current state of polymeric materials (PMs) with regards to their application as new renewable energy sources (RES). The statistics and current trends across the world concerning PMs will be discussed as well as methods of their production.

1.
V.
Smil
,
Energy at the crossroads: global perspectives and uncertainties
(
2003
).
2.
A. N.
Aleshin
,
Innovations
7
(
165
),
2012
.
3.
Yu. S.
Vasiliev
and
N. I.
Khrisanov
,
Ecology of the use of renewable energy sources
(
Publishing house of Leningrad State University
,
1991
).
4.
V. I.
Vissarionov
,
S. V.
Belkina
,
G. V.
Deryugina
,
V. A.
Kuznetsova
and
N. K.
Malinin
,
Power equipment for the use of non-traditional and renewable energy sources: directory-catalog
(
JSC "New and Renewable Energy Sources"
,
2004
).
5.
P.
Kaspar
,
D.
Sobola
,
K.
Částková
,
R.
Dallaev
,
E.
Šťastná
,
P.
Sedlák
,
A.
Knápek
,
T.
Trčka
and
V.
Holcman
,
Materials
14
(
6
),
1428
(
2021
).
6.
A.
Knápek
,
D.
Sobola
,
D.
Burda
,
A.
Daňhel
,
M.
Mousa
and
V.
Kolařík
,
Nanomaterials
9
(
2019
).
7.
F.
Orudzhev
,
S.
Ramazanov
,
D.
Sobola
,
P.
Kaspar
,
T.
Trčka
,
K.
Částková
,
J.
Kastyl
,
I.
Zvereva
,
C.
Wang
,
D.
Selimov
et al,
Nano Energy
90
,
106586
(
2021
).
8.
M. S.
Tasekeyev
and
L. M.
Eremeeva
,
Production of biopolymers as one of the ways to solve problems of ecology and agro-industrial complex: analyt. review
(
NTs NTI
,
Almaty
,
2009
).
9.
F.
O’Rourke
,
F.
Boyle
and
A.
Reynolds
,
Applied Energy
87
(
2
),
398
409
(
2010
).
10.
C. J.
Watson
,
Wind Systems
66
,
46
51
(
2010
).
11.
S.
Ramazanov
,
D.
Sobola
,
Ş.
Ţălu
,
F.
Orudzev
,
A.
Arman
,
P.
Kaspar
,
R.
Dallaev
and
G.
Ramazanov
,
Microsc. Res. Tech.
(
2021
).
12.
N.
Papež
,
T.
Pisarenko
,
E.
Ščasnovič
,
D.
Sobola
,
Ş.
Ţălu
,
R.
Dallaev
,
K.
Částková
and
P.
Sedlák
Coatings
12
(
10
),
1429
(
2022
).
13.
P.
Kaspar
,
D.
Sobola
,
K.
Částková
,
R.
Dallaev
,
E.
Šťastná
,
P.
Sedlák
,
A.
Knápek
,
T.
Trčka
and
V.
Holcman
,
Materials
14
(
6
),
1428
(
2021
).
14.
P.
Kaspar
,
D.
Sobola
,
K.
Částková
,
A.
Knápek
,
D.
Burda
,
F.
Orudzhev
,
R.
Dallaev
,
P.
Tofel
,
T.
Trčka
,
L.
Grmela
, and
Z.
Hadaš
,
Polymers
12
(
12
),
1
15
(
2020
).
15.
D.
Sobola
,
P.
Kaspar
,
K.
Částková
,
R.
Dallaev
,
N.
Papež
,
P.
Sedlák
,
T.
Trčka
,
F.
Orudzhev
,
J.
Kaštyl
,
A.
Weiser
,
A.
Knápek
and
V.
Holcman
,
Polymers
13
(
15
) (
2021
).
16.
I.
Kvien
,
Biomacromolecules J.
6
,
3160
3165
(
2005
).
17.
K. A.
Manaenkov
,
Vestnik Michurinskogo gosudarstvennogo agrarnogo universiteta
1
,
126
130
(
2015
).
18.
I. V.
Voskoboynikov
,
Lesnoy vestnik
6
(
2010
).
19.
R. I.
Shazzo
, “
Bezotkhodnye tekhnologii funktsional’nykh natural’nykh plodoovoshchnykh produktov na osnove topinambura
”, in
Kompleksnoe ispol’zovanie bioresursov: malootkhodnye tekhnologii: sb. materialy mezhdunarodnoy nauchno-prakticheskoy konferentsii
(
2010
), pp.
224
227
.
20.
V. A.
Efimov
,
A. K.
Shvedkova
,
T. G.
Korenkova
and
V. N.
Kirillov
,
Proceedings of VIAM: electron, scientific and technical. magazine
1
(
05
) (
2013
).
21.
E. N.
Kablov
,
G. M.
Gunyaev
and
A. T.
Tumanov
, “The initiator of the creation of composites”, in
Composite materials in aerospace materials science: sat. abstract report Interindustry scientific - technical conf.
(
VIAM
,
2009
), pp.
6
9
.
22.
R. R.
Mukhametov
,
K. R.
Akhmadieva
,
L. V.
Chursova
and
D. I.
Kogan
,
Aviation materials and technologies
2
,
38
42
(
2011
).
23.
V. N.
Kirillov
,
Yu. M.
Vapirov
and
E. A.
Drozd
,
Aviation materials and technologies
4
,
31
38
(
2012
).
24.
A. E.
Sorokin
,
E. Ya.
Beider
and
D. N.
Perfilova
,
Proceedings of VIAM: electron, scientific and technical. jury.
1
(
10
) (
2015
).
25.
S. I.
Voinov
,
G. F.
Zhelezina
,
N. A.
Solovieva
,
G. A.
Yamshchikova
and
L. N.
Timoshina
,
Proceedings of VIAM. electron, scientific and technical jury
2
(
08
) (
2015
).
26.
A. I.
Tkachuk
,
T. A.
Grebeneva
,
L. V.
Chursova
and
N. N.
Panina
,
Proceedings of VIAM: electron, scientific and technical. magazine
11
(
07
) (
2013
).
27.
S. E.
Shaheen
,
D. S.
Ginley
and
G. E.
Jabbour
,
MRS Bull.
30
,
10
(
2005
).
28.
P.
Sedlak
,
D.
Sobola
,
A.
Gajdos
,
R.
Dallaev
,
A.
Nebojsa
and
P.
Kubersky
,
Polymers
13
(
16
) (
2021
).
29.
T.
Smejkalová
,
Ş.
Ţǎlu
,
R.
Dallaev
,
K.
Částková
,
D.
Sobola
and
A.
Nazarov
, “
SEM imaging and XPS characterization of doped PVDF fibers
”, in
E3S Web of Conferences 270
(
2021
).
30.
A.
Knápek
,
R.
Dallaev
,
D.
Burda
,
D.
Sobola
,
M. M.
Allaham
,
M.
Horáček
,
P.
Kaspar
,
M.
Matějka
and
M. S.
Mousa
,
Nanomaterials
10
,
1294
(
2020
).
31.
K. E.
Perepelkin
,
Chemical fibers
3
,
1
15
(
2004
)
32.
K. A.
Manaenkov
,
V. V.
Khatuntsev
,
V. A.
Koltsov
and
A. B.
Rozhnov
,
TPPP APK
2
(
16
) (
2017
).
33.
K. E.
Perepelkin
,
Technical textiles
18
(
2008
).
This content is only available via PDF.
You do not currently have access to this content.