Advances in automation and robotics in construction also affect wood-based constructions. To some extent, scale and complexity, this transformation will be as fundamental to humanity as no other technological change in the past. In the context of sustainable and efficient construction, traditional material bases such as wood are becoming increasingly prevalent and implemented in modern design processes and design solutions. The great potential of this building material is achieved due to developments in production as well as the actual construction of timber buildings. Especially through prefabricated and solid wood products, which are also cross-glued laminated timber products, modern timber construction represents an interesting and sustainable construction technology. The aim of this paper is to define the basic aspects of industrial building industry in the context of new trends and to introduce the possibilities of implementation of elements of industry 4.0 in the field of wood-based construction.
Skip Nav Destination
,
Article navigation
27 September 2023
WORLD MULTIDISCIPLINARY CIVIL ENGINEERING-ARCHITECTURE-URBAN PLANNING SYMPOSIUM WMCAUS 2022
5–9 September 2022
Prague, Czech Republic
Research Article|
September 27 2023
Implementation of automation and robotization elements in the production of wood buildings Available to Purchase
Jozef Švajlenka;
Jozef Švajlenka
a)
1
Department of Construction Technology, Economy and Management, Faculty of Civil Engineering, Technical University of Košice
, 042 00 Košice, Slovakia
a)Corresponding author: [email protected]
Search for other works by this author on:
Mária Kozlovská
Mária Kozlovská
1
Department of Construction Technology, Economy and Management, Faculty of Civil Engineering, Technical University of Košice
, 042 00 Košice, Slovakia
Search for other works by this author on:
Jozef Švajlenka
1,a)
Mária Kozlovská
1
1
Department of Construction Technology, Economy and Management, Faculty of Civil Engineering, Technical University of Košice
, 042 00 Košice, Slovakia
a)Corresponding author: [email protected]
AIP Conf. Proc. 2928, 070008 (2023)
Citation
Jozef Švajlenka, Mária Kozlovská; Implementation of automation and robotization elements in the production of wood buildings. AIP Conf. Proc. 27 September 2023; 2928 (1): 070008. https://doi.org/10.1063/5.0170363
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
27
Views
Citing articles via
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Related Content
Analysis processes of selected wooden buildings
AIP Conf. Proc. (September 2023)
A review on free vibration characteristics of natural fiber reinforced polymer composites
AIP Conf. Proc. (May 2023)
Experimental investigation on the mechanical properties of flax, E-glass and carbon fabric reinforced hybrid epoxy resin composites
AIP Conf. Proc. (December 2019)
Effect of sulphur vulcanization system on physical, morphological and thermal properties of natural rubber latex foam
AIP Conf. Proc. (May 2022)
Tensile properties of hybrid jute/roselle reinforced polyester composites
AIP Conf. Proc. (December 2023)