The manuscript presents the results on electrical conductivity measurement and mechanical properties of prepreg-based thermoplastic carbon fiber reinforced composites modified by microfillers. Milled carbon fibers as well as copper and nickel micropowders have been used during moulding. It was shown that milled carbon fibers provide negative results reducing both mechanical properties and electrical conductivity. Nickel and copper micropowders positively influence the electrical properties: the increase of conductivity measured as 12-40%. While the tensile properties are positively affected, flexural and interlaminar are tending to reduce.
REFERENCES
1.
A.K.
Pathak
, M.
Borah
, A.
Gupta
, T.
Yokozeki
, and S.R.
Dhakate
, Compos. Sci. Technol.
135
, 28
(2016
).2.
A.Y.
Boroujeni
and M.S.
Al-Haik
, Polym. Compos.
40
, E1470
(2019
).3.
M.
Tehrani
, M.
Safdari
, A.Y.
Boroujeni
, Z.
Razavi
, S.W.
Case
, K.
Dahmen
, H.
Garmestani
, and M.S.
Al-Haik
, Nanotechnology
24
, 155704
(2013
).4.
J.A.
Rodríguez-González
, C.
Rubio-González
, M.
Jiménez-Mora
, L.
Ramos-Galicia
, and C.
Velasco-Santos
, Appl. Compos. Mater.
25
, 1115
(2018
).5.
A.
Rudenko
, A.
Biryukov
, O.
Kerzhentsev
, R.
Fediuk
, N.
Vatin
, Y.
Vasilev
, S.
Klyuev
, M.
Amran
, and M.
Szelag
, Crystals
11
, 323
(2021
).6.
S.
Roy
, R.S.
Petrova
, and S.
Mitra
, Nanotechnol. Rev.
7
, 475
(2018
).7.
D.J.
Hayne
, F.
Stojcevski
, D.B.
Knorr
, N.T.
Tran
, and L.C.
Henderson
, Compos. Part A Appl. Sci. Manuf.
145
, 106374
(2021
).8.
Z.
Zhang
, J.L.
Wilson
, B.R.
Kitt
, and D.W.
Flaherty
, ACS Appl. Polym. Mater.
3
, 986
(2021
).9.
B.
Song
, Z.
Liu
, L.
Chen
, L.
Ma
, and Y.
Huang
, Polym. Compos.
43
, 454
(2022
).10.
S.
Kumar
, B.G.
Falzon
, J.
Kun
, E.
Wilson
, G.
Graninger
, and S.C.
Hawkins
, Compos. Part A Appl. Sci. Manuf.
131
, 105801
(2020
).11.
S.C.
Brown
, C.
Robert
, V.
Koutsos
, and D.
Ray
, Compos. Part A Appl. Sci. Manuf.
133
, 105885
(2020
).12.
H.
Chen
, V. V.
Ginzburg
, J.
Yang
, Y.
Yang
, W.
Liu
, Y.
Huang
, L.
Du
, and B.
Chen
, Prog. Polym. Sci.
59
, 41
(2016
).13.
V.
Kumar
, T.
Yokozeki
, C.
Karch
, A.A.
Hassen
, C.J.
Hershey
, S.
Kim
, J.M.
Lindahl
, A.
Barnes
, Y.K.
Bandari
, and V.
Kunc
, Compos. Part B Eng.
183
, 107688
(2020
).14.
K.
Mayandi
, N.
Rajini
, N.
Ayrilmis
, M.P. Indira
Devi
, S.
Siengchin
, F.
Mohammad
, and H.A.
Al-Lohedan
, J. Mater. Res. Technol.
9
, 15962
(2020
).15.
16.
Y.
Ou
, C.
González
, and J.J.
Vilatela
, Compos. Part B Eng.
201
, 108372
(2020
).17.
Y.
Di Boon
and S.C.
Joshi
, Mater. Today Commun.
22
, 100830
(2020
).18.
J.B.
Knoll
, B.T.
Riecken
, N.
Kosmann
, S.
Chandrasekaran
, K.
Schulte
, and B.
Fiedler
, Compos. Part A Appl. Sci. Manuf.
67
, 233
(2014
).19.
M.S.
Tareq
, B.
Jony
, S.
Zainuddin
, M.
Al Ahsan
, and M. V.
Hosur
, Fatigue Fract. Eng. Mater. Struct.
44
, 461
(2021
).20.
M. V.
Burkov
and A. V.
Eremin
, Polym. Compos.
42
, 4265
(2021
).21.
M. V.
Burkov
and A. V.
Eremin
, AIP Conf. Proc.
2509
, 020032
(2022
). 22.
A. V.
Eremin
and M. V.
Burkov
, AIP Conf. Proc.
2509
, 020064
(2022
).
This content is only available via PDF.
©2023 Authors. Published by AIP Publishing.
2023
Author(s)
You do not currently have access to this content.
