Passive cooling strategies react with local climate and site conditions to maximize the comfort and health of the users while minimizing energy consumption. Passive cooling strategies reduce the temperature inside the buildings without the need for electricity. Consequently, the aim of this study is to test the practicality of applying selected strategies to improve the energy consumption of governmental housing in UAE in the hot arid climate setting selected to be analyzed is Dubai, United Arab Emirates. The site analysis where have been taken from the software Climate Consultant Software. One Baseline design was selected to be improved by the passive cooling strategies that were applied. This baseline was taken from previous typologies. The passive cooling strategies were applied using the software Revit 2016 – by Autodesk. Energy reduction was achieved due to changing materials, orientation, natural ventilation, and shading devices. This research paper could achieve an improvement in energy consumption by 33% after using passive cooling strategies.

1.
Mushtaha
E
,
Alsyouf
I
,
Hamad
R
,
Elmualim
A
,
Maksoud
A
,
Yahia
MW
.
Developing design guidelines for university campus in hot climate using Quality Function Deployment (QFD): the case of the University of Sharjah, UAE
.
Archit Eng Des Manag.
2022
;
1
21
.
2.
Mushtaha
ES
,
Mori
T
,
Masamichi
E.
The Impact of Passive Design on Building Thermal Performance in Hot and Dry Climate
.
Open House Int.
2012
Jan;
37
(
3
):
81
91
.
3.
Mushtaha
E
,
Salameh
T
,
Kharrufa
S
,
Mori
T
,
Aldawoud
A
,
Hamad
R
, et al
The impact of passive design strategies on cooling loads of buildings in temperate climate
.
Case Stud Therm Eng.
2021
;
28
:
101588
.
4.
Abdelkareem
MA
,
Elsaid
K
,
Wilberforce
T
,
Kamil
M
,
Sayed
ET
,
Olabi
A.
Environmental aspects of fuel cells: A review
.
Sci Total Environ [Internet].
2021
;
752
:
141803
. Available from: http://www.sciencedirect.com/science/article/pii/S0048969720353328
5.
Mushtaha
E
,
Shamsuzzaman
M
,
Abdouli
S
,
Hamdan
S
,
Soares
T.
Application of the analytic hierarchy process to developing sustainability criteria and assessing heritage and modern buildings in the UAE
.
Archit Eng Des Manag.
2019
Nov;
16
:
1
27
.
6.
Maghrabie
HM
,
Abdelkareem
MA
,
Al-Alami
AH
,
Ramadan
M
,
Mushtaha
E
,
Wilberforce
T
, et al
State-of-the-art technologies for building-integrated photovoltaic systems
.
Buildings.
2021
;
11
(
9
):
383
.
7.
Mushtaha
ES
,
Al-Zwaylif
S
,
Ghalib
S.
Climatically and culturally responsive typologies using mathematical permutation
.
Archnet-IJAR Int J Archit Res.
2020
Jan;
14
(
3
):
581
97
.
8.
Olabi
AG
,
Sayed
ET
,
Wilberforce
T
,
Jamal
A
,
Alami
AH
,
Elsaid
K
, et al
Metal-Air Batteries—A Review
. Vol.
14
,
Energies.
2021
.
9.
Sayed
ET
,
Abdelkareem
MA
,
Alawadhi
H
,
Salameh
T
,
Olabi
AG
,
Alami
AH
.
Facile and low-cost synthesis route for graphene deposition over cobalt dendrites for direct methanol fuel cell applications
.
J Taiwan Inst Chem Eng.
2020
Oct;
115
:
321
30
.
10.
Alami
AH
. Mechanical Energy Storage for Renewable and Sustainable Energy Resources.
Cham
:
Springer International Publishing
;
2020
. (
Advances in Science, Technology & Innovation)
.
11.
Taleb
HM
.
Using passive cooling strategies to improve thermal performance and reduce energy consumption of residential buildings in U.A.E. buildings
.
Front Archit Res.
2014
;
3
(
2
):
154
65
.
12.
Alami
AH
. Compressed-Air Energy Storage Systems BT - Mechanical Energy Storage for Renewable and Sustainable Energy Resources. In:
Alami
AH
, editor.
Cham
:
Springer International Publishing
;
2020
. p.
67
85
. Available from:
13.
Alami
AH
,
Aokal
K
,
Hawili
AA
,
Hasan
R
,
Alawadhi
H.
Facile preparation of graphene coated copper electrodes via centrifugal milling for capacitive deionization applications
.
Desalination [Internet].
2018
;
446
:
51
8
. Available from: http://www.sciencedirect.com/science/article/pii/S0011916418316849
14.
Olabi
AG
,
Onumaegbu
C
,
Wilberforce
T
,
Ramadan
M
,
Abdelkareem
MA
,
Al-Alami
AH
.
Critical review of energy storage systems
.
Energy [Internet]
.
2021
;
214
:
118987
. Available from: http://www.sciencedirect.com/science/article/pii/S0360544220320946
15.
Alami
AH
,
Assad
MA
,
Aokal
C.
Facile and Cost-Effective Synthesis and Deposition of a YBCO Superconductor on Copper Substrates by High-Energy Ball Milling
.
Metall Mater Trans A Phys Metall Mater Sci.
2016
;
47
(
12
).
16.
Salameh
T
,
Zhang
D
,
Juaidi
A
,
Alami
AH
,
Al-Hinti
I
,
Olabi
AG
.
Review of solar photovoltaic cooling systems technologies with environmental and economical assessment
.
J Clean Prod [Internet].
2021
;
326
:
129421
. Available from: https://www.sciencedirect.com/science/article/pii/S0959652621036027
17.
Alami
AH
,
Rabaia
MKH
,
Sayed
ET
,
Ramadan
M
,
Abdelkareem
MA
,
Alasad
S
, et al
Management of potential challenges of PV technology proliferation
.
Sustain Energy Technol Assessments [Internet].
2022
;
51
:
101942
. Available from: https://www.sciencedirect.com/science/article/pii/S2213138821009565
18.
Alami
AH
,
Hawili
AA
,
Chaker
N.
Experiments on surface hardening of aluminum components by high-energy centrifugal milling
.
Int J Adv Manuf Technol [Internet].
2018
;
95
(
9
):
3855
62
. Available from:
19.
Mushtaha
E
,
Zwaylif
S
,
Hanane
I
, [email protected].
Border Vacuum: A Study of Walkability, Liveability, and Vibrancy around Dubai Mall Station
.
Urban Des Plan.
2018
Aug;
171
.
This content is only available via PDF.
You do not currently have access to this content.