Lightweight materials having a wide scope of properties which makes specialist center around them to additional applications and are broadly used in the different sectors like automobile, airspace, sports, etc. Aluminium matrix-based composites (AMMCs) of Al 7075 and Al 6061 alloys are very common in structural applications. The stir casting technique is overwhelming as a result of its minimal effort and adaptability. In view of this, reasonable composites are chosen as alluring materials which are produced by various strategies with chosen quality of composites. A review on mechanical characteristics like hardness and strength and tribological performance such as wear resistance, friction, etc. of AMMCs with Al 6061 and Al 7075 alloy matrix reinforced with different micro/nano particles is presented in this paper which provides how the process variables affect the mechanical performance and wear behavioral characteristics of Al 6061 and Al 7075 composites. Further, the factors affecting on the various mechan ical properties and tribological performance with stir casting process variables are also discussed in this review. This recent assessment of aluminium alloy based AMMCs would guide to the contemporary researchers to choose the right reinforcement for Al 6 061 and Al 7075 matrix and will also monitor for the selection of the optimum process variables.
REFERENCES
1.
R. A.
Kumar
and A.
Devaraju
, Modeling of Mechanical Properties and High Temperature Wear Behavior of Al7075/SiC/CRS Composite Using RSM
. Silicon
13
, 3499
–3519
(2021
).2.
B.
Subramaniam
, B.
Natarajan
, B.
Kaliyaperumal
, and S.J.S
Chelladurai
, Investigation on mechanical properties of aluminium 7075-boron carbide-coconut shell fly ash reinforced hybrid metal matrix composites
. China Foundary
15
(6
), 449
–456
(2018
).3.
M.
Shettar
, P.
Hiremath
, G.
Shankar
, A.
Kini
and S.
Sharma
, Tribolayer Behaviour and Wear of Artificialy Aged Al6061 Hybrid Composites
. International Journal of Automotiveand Mechanical Engineering
18
(2
), 8668
–8676
(2021
).4.
Md Tanwir
Alam
, Physical, Corrosion and Microstructural Analysis of A356/SiC Nanocomposites Fabricated through Stir Casting Process
. Materials Science Forum
1034
, 73
–86
(2021
).5.
K.L.
Zheng
, X.S.
Wei
, B.
Yan
, and P.F.
Yan
, Ceramic waste SiC particle-reinforced Al matrix composite brake materials with a high friction coefficient
. Wear
458
-459, 203424
(2020
).6.
M.T.
Alam
, A.H.
Ansari
, S.
Arif
and M.N.
Alam
, Mechanical properties and morphology of aluminium metal matrix nanocomposites-stir cast products
. Advances in Materials and Processing Technologies
3
(4
), 600
–615
(2017
).7.
P.
Samal
, P.R.
Vundavilli
, A.
Meher
, and M.M.
Mahapatra
, Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties
. Journal of Manufacturing Process
59
, 131
–152
(2020
).8.
M.T.
Alam
, S.
Arif
, A.H. Ansa
ri
, and M.N.
Alam
, Optimization of wear behaviour using Taguchi and ANN of fabricated aluminium matrix nanocomposites by two-step stir casting
. Materials Research Express
6
(3
), 065002
(2019
).9.
P.P.
Jin
, G.
Chen
, L.
Han
, and J.H.
Wang
, Dry sliding friction and wear behaviors of Mg2B2O5 whisker reinforced 6061Al matrix composites
. Transactions Nonferrous Metals Society of China
24
(1
), 49
–57
(2014
).10.
S.
Veličković
, B.
Stojanović
, M.
Babić
, A.
Vencl
, I.
Bobić
, G. V.
Bognár
and F.
Vučetić
, Parametric optimization of the aluminium nanocomposites wear rate
. Journal of the Brazilian Society of Mechanical Sciences and Engineering
41
:19, (2019
).11.
V.
Bharath
, M.
Nagaral
, V.
Auradi
, and S.A.
Kori
, Preparation of 6061Al-Al2O3 MMC’s by Stir Casting and Evaluation of Mechanical and Wear Properties
. Procedia Material Science
6
, 1658
–1667
(2014
).12.
S.
Naher
, D. Brabazonand L.
Looney
, Development and assessment of a new quick quench stir caster design for the production of metal matrix composites
. Journalof Material Process Technology
1669
(3
), 430
–439
(2005
).13.
Y.
Wu
, Gap-Yong
Kim
, I.E.
Anderson
and T.A.
Lograsso
, Experimental Study on Viscosity and Phase Segregation of Al--Si Powders in Microsemisolid Powder Forming
. Journal of Manufacturing Science and Engineering, Transactions of the ASME.
132
(1
), 011003
–011007
(2010
).14.
A.
Melaibari
, A.
Fathy
, M.
Mansouri
and M.A.
Eltaher
, Experimental and numerical investigation on strengthening mechanisms of nanostructured Al-SiC composites
. Journal of Alloys and Compounds
774
, 1123
–1132
(2019
).15.
S.
Amirkhanlou
and B.
Niroumand
, Synthesis and characterization of A356-SiCp composites by stir casting and compocasting methods
. Transactions of Nonferrous Metals Society of China
20
, s788
–s793
(2010
),.16.
B.S.
Yigezu
, P.K.
Jha
and M.M.
Mahapatra
, The Key Attributes of Synthesizing Ceramic Particulate Reinforced Al-Ba sed Matrix Composites through Stir Casting Process: A Review
. Materials and Manufacturing Processes
28
(9
), 969
–979
(2013
).17.
I.
Balasubramanian
and R.
Maheswaran
, Effect of inclusion of SiC particulates on the mechanical resistance behaviour of stir-cast AA6063/SiC composites
. Materials & Design
65
, 511
–520
(2015
).18.
S.T.
Mavhungu
, E.T.
Akinlabi
, M. A.
Onitiri
and F. M.
Varachia
, Aluminum Matrix Composites for Industrial Use: Advances and Trends
. Procedia Manufacturing
7
, 178
–182
(2017
).19.
R.K.G.
Bhandare
and P.M Sona
wane
, Preparation of Aluminium Matrix Composite by using Stir Casting Method & it’s Characterization
. International Journal of Current Engineering and Technology
4
(3
), 114
–155
(2014
).20.
G.B.V.
Kumar
, C. S. P.
Rao
, N.
Selvaraj
and M.S.
Bhagyashekar
, Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites
. Journal of Minerals and Materials Characerisation and Engineering
09
(01
), 43
–55
(2010
).21.
A.
Baradeswaran
and A.E.
Perumal
, Influence of B4C on the tribological and mechanical properties of Al 7075-B4C composites
. Composite Part B Engineering
54
(1
), 146
–152
(2013
).22.
H.I.
Akbar
, E.
Surojo
, D.
Ariawan
and A. R.
Prabowo
, Experimental study of quenching agents on Al6061-Al2O3 composite: Effects of quenching treatment to microstructure and hardness characteristics
. Results in Engineering
6
, 100105
(2020
).23.
V.K.
Anand
, A.
Aherwar
, M.
Mia
, O.
Elfakir
and L.
Wang
, Influence of silicon carbide and porcelain on tribological performance of Al6061 based hybrid composites
. Tribology International
151
, 106514
(2020
).24.
V.
Chak
, H.
Chattopadhyay
, and A.
Kumar
, Synthesis, characterization and deformation of Al-4.5Cu/SiCp composites
. Materials Today: Proceedings
26
, 2833
–2838
(2019
).25.
R.
Devanathan
, J.
Ravikumar
, S.
Boopathi
, D.C.
Selvam
and S.A
Anicia
, Influence in Mechanical Properties of Stir Cast Aluminium (AA6061) Hybrid Metal matrix Composite (HMMC) with Silicon Carbide, Fly Ash and Coconut coir Ash Reinforcement
. Materials Today: Proceedin
22
, 3136
–3144
(2019
).26.
M.F.
Mohamed
, S.
Yaknesh
, G.
Radhakrishnan
and P.
Mohankumar
, Optimization of dry sliding wear behavior of flyash & zirconia reinforced Al-Mg-1Si-Cu HMMC using Taguchi technique
. Materials Today: Proceedings
22
, 1203
–1208
(2020
).27.
M.C.
Gowrishankar
, P.
Hiremath
, M.
Shettar
, S.
Sharma
and U.S
Rao
, Experimental validity on the casting characteristics of stir cast aluminium composites
. Journal of Material Research Technology
9
(3
), 3340
–3347
(2020
).28.
M.
Hedayatian
, A.
Momeni
, A.
Nezamabadi
and K.
Vahedi
, Effect of graphene oxide nanoplates on the microstructure, quasi-static and dynamic penetration behavior of Al6061 nanocomposites
. Composite: Part B Engienrring
182
, 107652
(2020
).29.
R.G.
Lakshmikantha
and V.
Auradi
, Processing and evaluation of Al/B4C particulate MMC’s: Tensile strength and wear properties under different elevated temperature test condition
. Materials Today: Proceeding
28
, 504
–509
(2019
).30.
N.K.
Maurya
, M.
Maurya
, A.K.
Srivastava
, S.P.
Dwivedi
, A.
Kumar
and S.
Chauhan
, Investigation of mechanical properties of Al 6061/SiC composite prepared through stir casting technique
. Materials Today: Proceedings
25
, 755
–758
(2019
).31.
S.
Mohanasundaram
, S.J.
Vijay
, X.A.
Vasanth
, R.S.
Rai
, and I.
Kantharaj
, Optimization of coating thickness and coating width for friction surfaced Al6061-B4C over Al6061
. Materials Today: Proceedings
33
, 939
–945
(2020
).32.
D.
Muruganandam
, J.
Jayapriya
, M.
Suresh
, S.
Chitradevi
, G.
Puthilibai
and M.
Sudhakar
, Simple study on behavior of composites with augmentation of Silicon carbide on Al6061 aluminium alloy based on mechanical properties
. Materials Today: Proceedings
33
(7
), 4573
–4577
(2020
).33.
S.P.
Singh
, K.A.V.
Geethan
, D.
Elilraja
, T.
Prabhuram
and J.I.
Durairaj
, Optimization of dry sliding wear performanceof functionally graded Al6061/20% SiC metal matrix composite using Taguchi method
. Materials Today: Proceedings
22
, 2824
–2831
(2019
).34.
P.S.R.
Rao
and C.B.
Mohan
, Study on mechanical performance of silicon nitride reinforced aluminium metal matrix composites
. Materials Today: Proceedings
33
, 5534
–5538
(2020
).35.
R.G.
Rao
, M.
Ghosh
, R.I.
Ganguly
, S.C.P
, Bose
and K.L.
Sahoo
,. Mechanical properties and age hardening response of Al6061 alloy based composites reinforced with fly ash
. Material Science Engineering A.
772
, 138823
(2020
).36.
C.R.P.
Rao
, M.S.
Bhagyashekar
and N.
Viswanath
, Machining Behavior of Al6061-Fly Ash Composites
. Procedia Materials Science
5
, 1593
–1602
(2014
).37.
S.
Sahoo
, S. Samaland B.
Bhoi
, Fabrication and characterization of novel Al-SiC-hBN self-lubricating hybrid composites
. Materials Today Communication
25
, 101402
(2020
).38.
J.
Senthilkumar
, P.S.M.
Kumar
, and M.
Balasubramanian
, Effect of hot extrusion on mechanical and microstructural characteristics of stir cast AA6061/SiC/graphite hybrid composites
. Materials Today: Proceedings
44
(5
), 3638
–3641
(2021
).39.
P.N.
Siddappa
, B. P.
Shivakumar
, K. B.
Yogesha
, M.
Mruthunjaya
and D.P.
Girish
, The effect of TiC particulate reinforcement on dry sliding wear behaviour of Al based composites
. Materials Today: Proceedings
22
, 2291
–2299
(2019
).40.
H.
Singh
and H.
Bhowmick
, Lubrication characteristics and wear mechanism mapping for hybrid aluminium metal matrix composite sliding under surfactant functionalized MWCNT-oil
. Tribology International
145
, 106152
(2020
).41.
Yashpal
, C. S. Jawalkar
, S.
Kant
, N.
Panwar
, M.D.
Sharma
and H.S.
Pali
, Effect of particle size variation of bagasse ash on mechanical properties of aluminium hybrid metal matrix composites
. Materials Today: Proceedings
21
, 2024
–2029
(2020
).42.
H.R.
Ezatpour
, S.A.
Sajjadi
, M.H.
Sabzevar
and Y.
Huang
, Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting
. Materials Design
55
, 921
–928
(2014
).43.
K.
Kalaiselvan
, N.
Murugan
and Parameswaran
, Production and characterization of AA6061-B4C stir cast composite
. Materials Design
32
(7
), 4004
–4009
(2011
).44.
Y.
Pazhouhanfar
and B.
Eghbali
, Microstructuralcharacterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process
. Materials Science Engineering A
710
, 172
–180
(2018
).45.
N.
Panwar
and A.
Chauhan
, Optimizing the effect of reinforcement, particle size and aging on impact strength for Al 6061-red mud composite using Taguchi technique
. Sadhana-Academic Proceeding in Engineering Science
43
(7
), 1
–10
(2018
).46.
A. K.
Mishra
and R. K.
Srivastava
, Wear Behaviour of Al-6061/SiC Metal Matrix Composites
. Journal of The Institution of Engineers Series C
98
(2
), 97
–103
(2017
).47.
D.A.
Nayana
, M.
Marachakkanavar
and N.
Kantli
, Tribological Behavior of Al6061 Alloy Reinforced with Fly Ash Particles
. Techno-Societal
2016
, 915
–923
(2018
).48.
R.
Pandiyarajan
, P.
Maran
, S.
Marimuthu
and K.C.
Ganesh
, Mechanical and tribological behavior of the metal matrix composite AA6061/ZrO2/C
. Journal of Mechanical Science and Technology
31
(10
), 4711
–4717
(2017
).49.
S.N.
Prashant
and M.N.V. A. Preparation and Evaluation of Mechanical and Wear Properties of Al6061 Reinforced with Graphite and SiC
. International Journal of Mechanical Engineering and Robotics Research
1
(3
), 106
–112
(2012
).50.
K.
Umanath
, S.T.
Selvamani
, K.K.
Palanikumar
and D.
Niranjanavarma
, Metal to metal worn surface of AA6061 hybrid composites casted by stir casting method
. Procedia Engineering
97
, 703
–712
(2014
).51.
B.
Ravi
, B.B.B.
Naik
and J.U.
Prakash
, Characterization of Aluminium Matrix Composites (AA6061/B4C) Fabricated by Stir Casting Technique
. Materials Today: Proceedings
2
(4-5
), 2984
–2990
(2015
).52.
H.
Raju
and P.V.
Krupakra
, Corrosion characterization of Al 6061/Red Mud MMCs in hydrochloric Acid
. Materials Today: Proceedings
22
, 1765
–1770
(2019
).53.
V.
Auradi
, G.L.
Rajesh
and S.A.
Kori
, Processing of B4C Particulate Reinforced 6061Aluminum Matrix Composites by Melt Stirring Involving Two-step Addition
. Procedia Materials Science
6
, 1068
–1076
(2014
).54.
R. G.
Bhandare
and P. M. Sona
wane
, Preparation of Aluminium Matrix Composite by Using Stir Casting Method
. International Journal of Engineering Advance Technology
3
(2
), 61
–65
(2013
).55.
S. O.
Adeosun
, E. I.
Akpan
, O. P.
Gbenebor
and S.A.
Balogun
, Ductility and hardness of chloride cleaned AA6011/SiCp composites
. Transactions Nonferrous Meta ls Society of China
26
(2
), 339
–347
(2016
).56.
B. C.
Kandpal
, J.
Kumar
and H.
Singh
, Fabrication and characterisation of Al2O3/aluminium alloy 6061 composites fabricated by Stir casting
. Materials Today: Proceedings
4
(2
), 2783
–2792
(2017
).57.
P.M.
Sonawane
and M.G.
Karnik
, Experimental Investigation of Optimum level of Reinforcementswithin 6061Al Alloy for betterTribological and Mechanical Properties
. Materials Today: Proceedings
4
(2
), 3290
–3299
(2017
).58.
S.
Suresh
, N.S.V.
Moorthi
, S.C.
Vettivel
, S.
Selvakumar
and S.R.
Jinu
, Effect of graphite addition on mechanical behavior of Al6061/TiB2 hybrid composite using acoustic emission
. Materials Science Engineering A
612
, 16
–27
(2014
).59.
S.J.
James
, K.
Venkatesan
, P.
Kuppan
and R.
Ramanujam
, Comparative study of composites reinforced with SiC and TiB2
. Procedia Engineering
97
, 1012
–1017
(2014
).60.
M. S.
Raviraj
, C.M.
Sharanprabhu
and G.C.
Mohankumar
, Experimental Analysis on Processing and Properties of Al-TiC Metal Matrix Composites
. Procedia Materials Science
5
, 2032
–2038
(2014
).61.
S.
Gopalakrishnan
and N.
Murugan
, Production and wear characterisation of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method
. Composite Part B Engineering
43
(2
), 302
–308
(2012
).62.
J.J.
Moses
and S.J.
Sekhar
, Investigation on the Tensile Strength and Microhardness of AA6061/TiC Composites by Stir Casting
. Transactions Indian Institute of Metals
70
(4
). 1035
–1046
(2017
).63.
U.
Pandey
, R.
Purohit
, P.
Agarwal
, S.K.
Dhakad
and R.S.
Rana
, Effect of TiC particles on the mechanical properties of aluminium alloy metal matrix composites (MMCs)
. Materials Today: Proceedings
4
(4
), 5452
–5460
(2017
).64.
R.
Ilandjezian
and S.
Gopalakannan
, Tensile Fracture and Compression failure Behavior of Cenosphere Reinforced AA6061 Metal Matrix Composite
. Procedia Engineering
173
, 1239
–1245
(2017
).65.
C. S.
Ramesh
, R.
Keshavamurthy
and J.
Madhusudhan
, Fatigue Behavior of Ni-P Coated Si3N4 Reinforced Al6061 Composites
. Procedia Materials Science
6
, 1444
–1454
(2014
).66.
P.
Sharma
, K.
Paliwal
, R.K.
Garg
, S.
Sharma
and D.
Khanduja
, A study on wear behaviour of Al/6101/graphite composites
. Journal of Asian Ceramic Society
5
(1
), 42
–48
(2017
).67.
B. A.
Kumar
, N. Muruganand I.
Dinaharan
, Dry sliding wear behavior of stir cast AA6061-T6/AlNp composite
. Transactions Nonferrous Metals Society of China
24
(9
), 2785
–2795
(2014
).68.
S.
Suresh
, G.H.
Gowd
and M.L.S.
Devakumar
, Mechanical and wear Characteristics of Aluminium Alloy 7075 Reinforced with Nano-Aluminium Oxide/ Magnesium Particles by Stir casting Method
. Materials Today: Proceedings
24
, 273
–283
(2020
).69.
Yu.
LI
, Q.
lin
, L.I., D.
Li
, W.
Liu
, and G.G.
Shu
, Fabrication and characterization of stir casting AA6061— 31%B4C composite
. Transactions Nonferrous Metals Society of China
26
(9
), 2304
–2312
(2016
).70.
R. K.
Bhushan
, S.
Kumar
and S.
Das
, Effect of machining parameters on surface roughness and tool wear for 7075 Al alloy SiC composite
. International Journal of Advance Manufacturing and Technology
50
(5-8
), 459
–469
(2010
).71.
R. K.
Bhushan
, S.
Kumar
and S.
Das
, Fabrication and characterization of 7075 Al alloy reinforced with SiC particulates
. International Journal of Advance Manufacturing and Technology
65
(5-8
), 611
–624
(2013
).72.
M.
Zakaulla
, A.R.A.
Khan
and P.G.
Mukunda
, Evaluation of the Taguchi Method for Wear Behavior of Al6061/Cu-SiC/Cu-Gr Hybrid Composite
. Materials Today: Proceedings
2
(4-5
), 2951
–2958
(2015
).73.
N. D.
Shiri
, T.
Bhat
, S.
Bhat
, and G.
Kumar
, Investigation of the effect of aging variables on the impact behaviour of Al 6061 alloy and its composites
. IET Conf. Publ.
648
CP, (2013
).74.
M. Abdul
kader
, N., Mohammed
, R.
and Hanoos
, The Effect of Nanoparticles Additives on Impact Strength of Metal Matrix Composites
. Journal of Engineering Technology
35
(1
), 37
–40
(2017
).75.
D.
Mummoorthi
, M.
Rajkumar
, and S. Ganesh
Kumar
, Advancement and characterization of Al-Mg-Si a loy using reinforcing materials of Fe2O3 and B4C composite produced by stir casting method
. Journal of Mechanical Science and Technology
33
(7
), 3213
–3222
(2019
).76.
B.
Prakash
and M.
Manimaran
, Investigations on mechanical properties of Al6061-SiC nanocomposites fabricated via stir casting process
. Materials Today: Proceedings
39
, 22
–25
(2020
).77.
S.
Sarkar
, A.
Bhirangi
, J.
Mathew
, R.
Oyyaravelu
, P.
Kuppan
, and A. S. S.
Balan
, Fabrication characteristics and mechanical behavior of Rice Husk Ash-Silicon Carbide reinforced Al-6061 alloy matrix hybrid composite
. Materials Today: Proceedings
5
(5
), 12706
–12718
(2018
).78.
A. K.
Virkunwar
, S.
Ghosh
, and R.
Basak
, Wear characteristics optimization of Al6061-Rice husk ash metal matrix composite using Taguchi method
. Materials Today: Proceedings
19
, 546
–550
(2019
).79.
A. C.
Bhasha
and K.
Balamurugan
, Studies on mechanical properties of Al6061/RHC/TiC hybrid composite
. International Journal Lightweight Materials and Manufacturing
4
(4
), 405
–415
(2021
).80.
H. I.
Akbar
, E.
Surojo
, D. Aria
wan
, A. R.
Prabowo
, and F.
Imanullah
, Fabrication of AA6061-sea sand composite and analysis of its properties
. Heliyon
7
(8
), 07770
(2021
).81.
A.
Kumar
, K. Paland S.
Mula
, Effects of cryo-FSP on metallurgical and mechanical properties of stir cast Al7075 SiC nanocomposites
. Journal of Alloys Compound
852
, 156925
(2021
).82.
N.
Ramadoss
, K.
Pazhanivel
and G.
Anbuchezhiyan
, Synthesis of B4C and BN reinforced Al7075 hybrid composites using stir casting method
. Integrative Medicin Research
9
(3
), 6297
–6304
(2020
).83.
S.V
Gosavi
, and M.D.
Jaybhaye
, Microstructural studies on aluminium metal matrix composite (Al7075-SiC) fabricated through stir casting process
. Materials Today: Proceedings
39
(4
), 1412
–1416
(2021
).84.
P.
Raghuvaran
, J.
Baskaran
, C.
Aagash
, A.
Ganesh
and S.G.
Krishna
, Evaluation of mechanical properties of Al7075-SiC composites fabricated through stir casting technique
. Materials Today: Proceedings
45
(2
), 1914
–1918
(2021
).85.
A.
Bhowmik
, D.
Dey
and A.
Biswas
, Tribological behaviour of Aluminium-Titanium Diboride (Al7075-TiB2) Metal Matrix Composites prepared by stir casting process
. Materials Today: Proceedings
26
(2
), 2000
–2004
(2020
).86.
D.
Sethi
, S.
Kumar
, S.
Choudhury
, S.
Shekhar
and B.S.
Roy
. Synthesis and characterization of AA7075 / TiB2 aluminum matrix composite formed through stir casting method
. Materials Today: Proceedings
26
(2
), 1908
–1913
(2020
).87.
S.
Gudipudi
, S. Na
gamuthu
, K.
Subbu
, S.
Prakasa
and R.
Chilakalapalli
, Enhanced mechanical properties of AA6061-B4C composites developed by a novel ultra-sonic assisted stir casting
. Engineering Science and Technology an International Journal
23
(5
), 1233
–1243
(2020
).88.
S. A.
Kumar
, J.H.
Vignesh
and S.P.
Joshua
, Investigating the effect of porosity on aluminium 7075 a loy reinforced with silicon nitride (Si3N4) metal matrix composites through Stir casting process
. Materials Today: Proceedings
39
(1
), 414
–419
(2021
).89.
K.
Hemalatha
, R.
Ashwin
, M.
Santhanam
, M.M.
Riyaz
, G.G.
Sozhamannan
and V.S.K
Venkatachalapthy
, Experimental study on behaviour of SiC and Graphene on AL7075 hybrid metal matrix composite
. Materials Today: Proceedings
39
(1
), 26
–30
(2021
).90.
M.
Khare
, R.K.
Gupta
, S.S.
Ghosha
, D.
Chhabra
, Effect of carbon black on mechanical properties of Al7075 / Al2O3 / B4C reinforced aluminum composite
. Materials Today: Proceedings
28
(4
), 2498
–2500
(2020
).91.
Dasore
, A.
, Rajak
, U.
, Panchal
, M.
et al. Prediction of Overall Characteristics of a Dual Fuel CI Engine Working on Low-Density Ethanol and Diesel Blends at Varying Compression Ratios
. Arab J Sci Eng
(2022
). 92.
Dasore
, A.
, Konijeti
, R.
, Tarun
, P. N. V.
, & Puppala
, N.
A novel empirical model for drying of root vegetables in thin-layers
. International Journal of Scientific & Technology Research
(2020
); 9
(1
):2639
-42
.93.
Shaik Mullan
Karishma
, Upendra
Rajak
, B. Kiran
Naik
, Abhishek
Dasore
, Ramakrishna
Konijeti
, Performance and emission characteristics assessment of compression ignition engine fuelled with the blends of novel antioxidant catechol-daok biodiesel
, Energy
, 2022
; 245
: 123304
, 94.
Reddy
, K. J.
, Madhusudhana Reddy
, N. P.
, Konijeti
, R. K.
, & Dasore
, A.
Numerical investigation of chemical reaction and heat source on radiating MHD stagnation point flow of carreau nanofluid with suction/injection
. In Defect and Diffusion Forum
, 388
: 171
–189
, (2018
).95.
Dasore
, Abhishek
, Ramakrishna
Konijeti
, and Naveen
Puppala
. "Experimental investigation and mathematical modeling of convective drying kinetics of white radish
." Frontiers in Heat and Mass Transfer (FHMT)
13
: 1
–8
, (2019
).96.
Konda
, Jayarami Reddy
, et al "Effect of non-uniform heat source/sink on MHD boundary layer flow and melting heat transfer of Williamson nanofluid in porous medium
." Multidiscipline Modeling in Materials and Structures
15
(2
): 452
–472
, (2018
).97.
V.
Balaji
, N.
Sateesh
and M.M.
Hussain
, Manufacture of Aluminium Metal Matrix Composite (Al7075-SiC) by Stir Casting Technique
. Materials Today: Proceedings
2
(4-5
), 3403
–3408
(2015
).98.
R.K.
Bhushan
, S.
Kumar
, S.
Das
, Optimisation of porosity of 7075 Al alloy 10% SiC composite produced by stir casting process through Taguchi method
. International Journal of Materials Engineering Innovation
1
(1
), 116
–129
(2009
).99.
S.
Sardar
, S.K.
Karmakar
and D.
Das
, Evaluation of Abrasive Wear Resistance of Al2O3/7075 Composite by Taguchi Experimental Design Technique
. Transactions of Indian Institute of Metals
71
(8
), 1847
–1858
(2018
).100.
R.R.
Veeravalli
, R.
Nallu
and S.M.M.
Mohiuddin
, Mechanical and tribological properties of AA7075-TiC metal matrix composites under heat treated (T6) and cast conditions
. Journal of Materials Research Technology
5
(4
), 377
–383
(2016
).101.
M.N
Naik
, K.D.
Reddy
, P.V.
Ramaiah
, B.V.
Narayana
and G.B.
Reddy
, Exploration of Mechanical behaviour and Wear Behaviour of Al4C3 Reinforced Aluminium Metal Matrix Composites Materials Today: Proceedings
4
(2
), 2989
–2998
(2017
).102.
M.
Imran
, A.R.A
Khan
, S.
Megeri
and S.
Sadik
, Study of hardness and tensile strength of Aluminium-7075 percentage varying reinforced with graphite and ba gasse-ash composites
. Resource Technology
2
(2
), 81
–88
(2016
).103.
A.K.
Sahoo
, S.
Pradhan
and A.K.
Rout
, Development and machinability assessment in turning Al/SiCp-metal matrix composite with multilayer coated carbide insert using Taguchi and statistical techniques
. Archeive of Civil and Mechanical Engineering
13
(1
), 27
–35
(2013
).104.
C. H.
Gireesh
, K. G. D.
Prasad
, and K.
Ramji
, Experimental investigation on mechanical properties of an Al6061 hybrid metal matrix composite
. Journal of Composite Science
2
(3
), 1
–10
(2018
).105.
A.
Raturi
, K. K. S.
Mer
, and P. Kumar
Pant
, Synthesis and characterization of mechanical, tribological and micro structural behaviour of Al 7075 matrix reinforced with nano Al2O3 particles
. Materials Today: Proceedings
4
(2
), 2645
–2658
(2017
).106.
S.
Devaganesh
, P. K. D.
Kumar
, N.
Venkatesh
, and R.
Balaji
, Study on the mechanical and tribological performances of hybrid SiC-Al7075 metal matrix composites
. Journal of Materials Research Technology
9
(3
), 3759
–3766
(2020
).
This content is only available via PDF.
© 2023 AIP Publishing LLC.
2023
AIP Publishing LLC
You do not currently have access to this content.
