Lathe machine is a general-purpose device which is utilized for machining different workpieces. In lathe machines, we can do distinctive operations. It is commonly utilized within the mechanical field. It makes the work simpler and sorted out. It is simple to introduce and simple to work on it. In today’s situation, a high-quality finished product is required and its production time should also be minimal. To attain this, as per necessity, process parameters have to be changed, which in turn requires data with respect to the ideal input parameter values that will optimize the target. In this paper, review work has been carried ou t related to various workpiece materials used, techniques employed for DOE, various process parameters considered, optimization of process parameters has been summarized. This work may serve as prepared data for the ensuing analysis and would include a rare database related to the inquiry about regions utilizing lathe machines.
REFERENCES
1.
J.
Madireddy
, “Importance of Lathe Machine in Engineering Field and its usage
,” vol. 14
, no. 6
, 2014
.2.
Dasore
, A.
, Rajak
, U.
, Panchal
, M.
et al. Prediction of Overall Characteristics of a Dual Fuel CI Engine Working on Low-Density Ethanol and Diesel Blends at Varying Compression Ratios
. Arab J Sci Eng
(2022
). .3.
Dasore
, A.
, Konijeti
, R.
, Tarun
, P. N. V.
, & Puppala
, N.
A novel empirical model for drying of root vegetables in thin-layers
. International Journal of Scientific & Technology Research
(2020
); 9
(1
):2639
–42
.4.
P. R.
Venugopal
et al, “Design and analysis of epoxy granite vertical machining centre base for improved static and dynamic characteristics
,” Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl.
, vol. 234
, no. 3
, pp. 481
–495
, 2020
, doi: .5.
Shaik Mullan
Karishma
, Upendra
Rajak
, B. Kiran
Naik
, Abhishek
Dasore
, Ramakrishna
Konijeti
, Performance and emission characteristics assessment of compression ignition engine fuelled with the blends of novel antioxidant catechol-daok biodiesel
, Energy
, 2022
; 245
: 123304
, 6.
I. S.
Rout
, S. S.
Padhi
, J. N.
Biswal
, and T. K.
Panda
, “Optimization of cutting tool material in lathe machine by T-test
,” vol. 4
, pp. 32
–36
, 2014
.7.
S. K.
Cho
, H. J.
Kim
, and S. H.
Chang
, “The application of polymer composites to the table-top machine tool components for higher stiffness and reduced weight
,” Compos. Struct.
, vol. 93
, no. 2
, pp. 492
–501
, 2011
, doi: .8.
Rajak
, U.
, Dasore
, A.
, Chaurasiya
, P.K.
et al. Effects of microalgae-ethanol-methanol-diesel blends on the spray characteristics and emissions of a diesel engine
. Environ Dev Sustain
(2022
). 9.
I.
Asiltürk
, S.
Neşeli
, and M. A.
Ince
, “Optimisation of parameters affecting surface roughness of Co28Cr6Mo medical material during CNC lathe machining by using the Taguchi and RSM methods
,” Meas. J. Int. Meas. Confed.
, vol. 78
, pp. 120
–128
, 2016
, doi: .10.
J. Do
Suh
and D. G.
Lee
, “Design and manufacture of hybrid polymer concrete bed for high-speed CNC milling machine
,” Int. J. Mech. Mater. Des.
, vol. 4
, no. 2
, pp. 113
–121
, 2008
.11.
P.
Taylor
, E. H. T.
Wee
, A. Y. C.
Nee
, and T. N.
Goh
, “Off-line adaptive optimization of CNC lathe turning
,” no. January 2015, pp. 37
–41
, 2007
, doi: .12.
C. O.
Izelu
, E. I.
Essien
, O.
Okwu
, D. K.
Garba
, and C. N.
Agunobi-
, “Lathe boring operation on ASTM A304 steel parameter optimization using response surface methodology
,” Aust. J. Mech. Eng.
, vol. 00
, no. 00
, pp. 1
–15
, 2019
, doi: .13.
S.
Mukherjee
, A.
Kamal
, and K.
Kumar
, “Optimization of Material Removal Rate During Turning of SAE 1020 Material in CNC Lathe using Taguchi Technique
,” Procedia Eng.
, vol. 97
, pp. 29
–35
, 2014
, doi: .14.
A. J.
Santhosh
, A. D.
Tura
, I. T.
Jiregna
, W. F.
Gemechu
, N.
Ashok
, and M.
Ponnusamy
, “Optimization of CNC turning parameters using face centred CCD approach in RSM and ANN-genetic algorithm for AISI 4340 a loy steel
,” Results Eng.
, vol. 11
, p. 100251
, 2021
, doi: .15.
M.
Mori
, H.
Mizuguchi
, M.
Fujishima
, Y.
Ido
, N.
Mingkai
, and K.
Konishi
, “CIRP Annals - Manufacturing Technology Design optimization and development of CNC lathe headstock to minimize thermal deformation
,” vol. 58
, pp. 331
–334
, 2009
, doi: .16.
P.
Dunaj
, B.
Powałka
, S.
Berczyński
, M.
Chodźko
, and T.
Okulik
, “Increasing lathe machining stability by using a composite steel–polymer concrete frame
,” CIRP J. Manuf. Sci. Technol.
, vol. 31
, pp. 1
–13
, 2020
, doi: .17.
Verma
, T. N.
, Rajak
, U.
, Dasore
, A.
, Afzal
, A.
, Manokar
, A. M.
, Aabid
, A.
, & Baig
, M.
(2021
). Experimental and empirical investigation of a CI engine fuelled with blends of diesel and roselle biodiesel
. Scientific Reports
, 11
(1
), 18865
.18.
K. A.
Vikram
, T. V. K.
Kanth
, and R. D. V
Prasad
, “Materials Today : Proceedings Response optimization using VIKOR while machining on lathe under dry and minimum quantity and lubrication conditions – A case study
,” Mater. Today Proc.
, no. xxxx
, 2019
, doi: .19.
H. Sona
wane
and T.
Subramanian
, “Improved Dynamic Characteristics for Machine Tools Structure Using Filler Materials
,” Procedia CIRP
, vol. 58
, pp. 399
–404
, 2017
, doi: .20.
N.
Muthuram
and F. C.
Frank
, “Optimization of machining parameters using artificial Intelligence techniques
,” Mater. Today Proc.
, vol. 46
, no. xxxx
, pp. 8097
–8102
, 2021
, doi: .
This content is only available via PDF.
©2023 Authors. Published by AIP Publishing.
2023
Author(s)
You do not currently have access to this content.
