In this paper, we present the validation of control using backstepping for Maximum Power Point Tracking (MPPT). For designing this controller, we follow an approach based on the validation of two Model based Design (MBD) tests. The objective is to design, to test and to validate the MPPT algorithms into embedded software. Using the Perturb and observe algorithm (P&O) allows to provide the reference voltage to the backstepping controller. After testing the good behavior of the whole system, we can generate C code optimized exactly for the STM32F4 microcontroller. Model in the Loop (MIL) and Processor in the Loop (PIL) are two techniques used to simulate the MPPT algorithm and backstepping controller. As conclusion, the algorithm and controller developed demonstrates a high performance with MPPT requirements. The power generated from PV array tracked perfectly the reference power with response time is less than 0.006s.
Skip Nav Destination
Article navigation
11 July 2023
INTERNATIONAL CONFERENCE ON ADVANCES IN COMMUNICATION TECHNOLOGY AND COMPUTER ENGINEERING
24–25 June 2022
Meknes, Morocco
Research Article|
July 11 2023
Validation of MPPT controller based on backstepping using the model and the processor in the loop with a 32-bit microcontroller
Omar Diouri;
Omar Diouri
a)
1
Laboratory of Intelligent Systems, Energy and Sustainable Development, Private University of Fez - UPF
, Fez, Morocco
a)Corresponding author: [email protected]
Search for other works by this author on:
Saloua Senhaji;
Saloua Senhaji
b)
1
Laboratory of Intelligent Systems, Energy and Sustainable Development, Private University of Fez - UPF
, Fez, Morocco
Search for other works by this author on:
Sanaa Faquir;
Sanaa Faquir
c)
1
Laboratory of Intelligent Systems, Energy and Sustainable Development, Private University of Fez - UPF
, Fez, Morocco
Search for other works by this author on:
Mohammed Ouazzani Jamil
Mohammed Ouazzani Jamil
d)
1
Laboratory of Intelligent Systems, Energy and Sustainable Development, Private University of Fez - UPF
, Fez, Morocco
Search for other works by this author on:
a)Corresponding author: [email protected]
AIP Conf. Proc. 2814, 040009 (2023)
Citation
Omar Diouri, Saloua Senhaji, Sanaa Faquir, Mohammed Ouazzani Jamil; Validation of MPPT controller based on backstepping using the model and the processor in the loop with a 32-bit microcontroller. AIP Conf. Proc. 11 July 2023; 2814 (1): 040009. https://doi.org/10.1063/5.0149117
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
18
Views
Citing articles via
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Related Content
Direct torque control method applied to the WECS based on the PMSG and controlled with backstepping approach
AIP Conference Proceedings (May 2018)
Improved backstepping based control approach for single-stage inverter grid interfacing solar photovoltaic system
AIP Conf. Proc. (December 2018)
Mechanical structure design of a ceramic sheet sealing nozzle sensitivity test equipment
AIP Conf. Proc. (December 2019)
Design and implementation of closed-loop controls for smart charging lithium ion battery UNS using switching technique boost converter
AIP Conf. Proc. (April 2020)
A reduced switches multilevel inverter for PV systems with harmonics reduction and MPPT ability
AIP Conf. Proc. (December 2023)