The Hybrid Photovoltaic Picohydro power plant is an alternative power plant that is being developed, where the power plant consists of two sources of electricity, from solar and hydro energy. Picohydro was designed with a single axis shaft generator with turbine rotors, but both components have the same rotational speed. It's needed to use reduction gear for the appropriate speed generator specifications used. This research will achieve the picohydro power transmission system. Design gearbox will be in accordance with the specification of the generator. The study began with the design of gearbox components and then proceeded with the manufacturing process. The design of the components will use FEA software. The results have transmission shaft 8 mm dimensions, with a transmission ratio of 2.5 using bevel gear, Pinion gear maximum stress about 296.7 MPa, with material S45C obtained a FOS of 1.78.

Topics
Power plants, Photovoltaics, Power transmission
1.
T.
 
Shantika
,
L.
 
Hartawan
,
Perancangan konsep Pembangkit Listrik Hybrid Solar PY-Hydro
.
National conference - XYI Rekayasa dan Aplikasi Teknik Mesin di Industri
,
Bandung
,
December 6, 2017
. ISSN (
2017
).
Google Scholar
 
2.
T.
 
Shantika
,
T.S.
 
Purwanto
 and
M.
 
Garnida
,
Design Rotor Turbine Hybrid Of Pv-Picohydro Power Plant as Energy Sources For Rural Areas In Indonesia
.
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD)
, Vol.
10
, Issue
3
, June 2020, 221-228 ISSN (P): 2249-6890; ISSN (E): 2249-8001 @ TJPRC Pvt. Ltd. www.tjprc.org (
2020
).
Google Scholar
 
3.
Tito
 
Shantika
,
Liman Hartawan, Analisis struktur Frame utama pada pembangkit Hybrid PY-picohydro
.
National conference - XYII Rekayasa dan Aplikasi Teknik Mesin di Industri
,
Bandung
,
November 21, 2018
. ISSN (
2018
).
Google Scholar
 
4.
T.
 
Shantika
,
L.
 
Hartawan
,
A.
 
Putra
 and
A.
 
Kurdi
,
Permanent Magnet Generator Design and Testing for hybrid PY-Picohydro Power Plant
,
IJMET
, vol.
9
, no.
11
, pp.
1167
–
1175
, November (
2018
).
Google Scholar
 
5.
K.Y.S.
 
Reddy
 and
P.U.
 
Raikar
,
Design and Optimization of Bevel Gear Actuator
.
International Advanced Research Journal in Science, Engineering and Technology IARJSET
Vol.
4
, Issue
10
, October 2017, ISSN (Online) 2393-8021 ISSN (Print) 2394-1588 ISO 3297:2007 Certified (
2017
).
Google Scholar
 
6.
J.E.
 
Shigley
 and
C.R.
 
Mischke
,
Mechanical Engineering Design
,
McGraw-Hill Publishing Co
.; 6th edition edition (March 2001) ISBN-10: 0071181865, ISBN-13: 978-0071181860 (
2011
).
Google Scholar
 
7.
R.R.
 
Kurlapkar
,
M.M.
 
Mirza
 and
Y.M.
 
Naik
,
Design and Static Structural Analysis of Bevel Gear
.
International Journal of Engineering Trends and Technology (IJETT)
- Volume
35
Number
7
-May 2016, ISSN: , http://www.ijettjournal.org (
2016
)
Google Scholar
 
8.
P.M.
 
Hadani
 and
Y.G.
 
Machhar
,
Failure Analysis of Bevel Gear System in Servo Geared Motor Drive System of Cnc Machine to Improve Strength Using Fem Approach
.
International Journal of Engineering Development and Research. IJEDR 2018
, Volume
6
, Issue
2
ISSN: 2321-9939, IJEDR1802006 (www.ijedr.org) (
2018
)
Google Scholar
 
9.
Sularso
 and
K.
Suga
,
Design of Machine Element
.
Jakarta
:
Pradnya Paramita
(
1997
).
Google Scholar
 
This content is only available via PDF.
© 2023 Author(s).
2023
Author(s)
You do not currently have access to this content.