The Finite Element Model Analysis is one type of numerical analysis method, which can able to solve the field problems described by a set of partial differential equations. Based on the CAD design model, this analysis is used to extract the geometric information of the model and concurrent with the design methodology. It has been carried out through three levels of analysis. Namely, static analysis, frequency analysis, and Temperature analysis. The entire simulation has been performed by using the SOLIDWORKS simulation tool. Volumetric properties are defined by the proposed 3D designed structure. Materials properties were considered by the ideal graphene material and Study properties were considered based on the study type involved in this analysis.
Skip Nav Destination
Article navigation
7 June 2023
5TH INTERNATIONAL CONFERENCE ON INNOVATIVE DESIGN, ANALYSIS & DEVELOPMENT PRACTICES IN AEROSPACE & AUTOMOTIVE ENGINEERING: I-DAD’22
24 February 2022
Chennai, India
Research Article|
June 07 2023
Simulation of vibration based model using Finite Element Analysis (FEA) method
Hushein Rasheeth;
Hushein Rasheeth
a
Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology
, Chennai, India
aCorresponding author: [email protected]
Search for other works by this author on:
Chettiar Ramachandra Bharathi
Chettiar Ramachandra Bharathi
Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology
, Chennai, India
Search for other works by this author on:
aCorresponding author: [email protected]
AIP Conf. Proc. 2766, 020035 (2023)
Citation
Hushein Rasheeth, Chettiar Ramachandra Bharathi; Simulation of vibration based model using Finite Element Analysis (FEA) method. AIP Conf. Proc. 7 June 2023; 2766 (1): 020035. https://doi.org/10.1063/5.0139425
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
35
Views
Citing articles via
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Related Content
Static analysis of welded joint on bus chassis using finite element method
AIP Conf. Proc. (May 2023)
Coupled finite element/boundary element formulation for scattering from axially-symmetric objects in three dimensions
J. Acoust. Soc. Am. (December 2017)
Effect of radial, concentric scratches on a steady state heat transfer through a fin of aluminum alloy 6061
AIP Advances (September 2023)